Analysis of Indium Tin Oxide Film Using Argon Fluroide (ArF) Laser-Excited Atomic Fluorescence of Ablated Plumes.

A two-pulse laser-excited atomic fluorescence (LEAF) technique at 193 nm wavelength was applied to the analysis of indium tin oxide (ITO) layer on polyethylene terephthalate (PET) film. Fluorescence emissions from analytes were induced from plumes generated by first laser pulse. Using this approach, non-selective LEAF can be accomplished for simultaneous multi-element analysis and it overcomes the handicap of strict requirement for laser excitation wavelength. In this study, experimental conditions including laser fluences, times for gating and time delay between pulses were optimized to reveal high sensitivity with minimal sample destruction and penetration. With weak laser fluences of 100 and 125 mJ/cm2 for 355 and 193 nm pulses, detection limits were estimated to be 0.10% and 0.43% for Sn and In, respectively. In addition, the relation between fluorescence emissions and number of laser shots was investigated; reproducible results were obtained for Sn and In. It shows the feasibility of depth profiling by this technique. Morphologies of samples were characterized at various laser fluences and number of shots to examine the accurate penetration. Images of craters were also investigated using scanning electron microscopy (SEM). The results demonstrate the imperceptible destructiveness of film after laser shot. With such weak laser fluences and minimal destructiveness, this LEAF technique is suitable for thin-film analysis.

Self-Assembled Formation of Well-Aligned Cu-Te Nano-Rods on Heavily Cu-Doped ZnTe Thin Films.

Cu doping of ZnTe, which is an important semiconductor for various optoelectronic applications, has been successfully achieved previously by several techniques. However, besides its electrical transport characteristics, other physical and chemical properties of heavily Cu-doped ZnTe have not been reported. We found an interesting self-assembled formation of crystalline well-aligned Cu-Te nano-rods near the surface of heavily Cu-doped ZnTe thin films grown via the molecular beam epitaxy technique. A phenomenological growth model is presented based on the observed crystallographic morphology and measured chemical composition of the nano-rods using various imaging and chemical analysis techniques. When substitutional doping reaches its limit, the extra Cu atoms favor an up-migration toward the surface, leading to a one-dimensional surface modulation and formation of Cu-Te nano-rods, which explain unusual observations on the reflection high energy electron diffraction patterns and apparent resistivity of these thin films. This study provides an insight into some unexpected chemical reactions involved in the heavily Cu-doped ZnTe thin films, which may be applied to other material systems that contain a dopant having strong reactivity with the host matrix.

Elemental Analysis of Chinese Black Inks on Xuan Paper by ArF Laser-Excited Plume Fluorescence.

Chemical analysis of Chinese black ink on xuan paper is useful for the authentication of Asian artwork. The analysis has to be nondestructive and has to accommodate artworks of all sizes. We apply three analytical techniques, ArF laser-induced plume fluorescence, Fourier transform infrared (FTIR) spectroscopy, and portable X-ray fluorescence (pXRF) to analyze five commercial Chinese black inks on two kinds of xuan paper. The FTIR signal is found to be interfered by the substrate which is inevitable because the pigments diffuse extensively into the xuan fiber network. The XRF signal is shown to be feeble and no signal can be registered until the samples are stacked and when the analytes are present at tens of percent. In contrast, the plume fluorescence technique can detect the minor and trace signature elements. The method is based on a two-laser-pulse scheme performed on a high precision optical setup: the first 355 nm laser pulse ablates a thin layer of the ink to create a plume; the second 193 nm laser pulse induces multi analytes in the plume to fluoresce. Partial-least-squares discriminant analysis of the fluorescence spectra unambiguously sorts the ink-xuan combinations while the sampled area is not visibly damaged even under the microscope. The laser probe can handle samples of arbitrary size and shape, is air compatible, and no sample pretreatment is necessary.

Two-dimensional transition-metal oxide monolayers as cathode materials for Li and Na ion batteries.

Two-dimensional monolayers are attractive for applications in metal-ion batteries because of their low ion-diffusion barrier and volume expansion. In this work, we carry out a first-principles study on electrochemical and structural properties of two-dimensional (2D) oxide monolayers and investigate their applications in metal-ion batteries. 2D transition-metal oxide monolayers (MO2; M = Mn, Co, and Ni) with various ion-intercalation densities are systematically studied. Our calculations show that Li and Na atoms can easily be transported on the surfaces of the monolayers with low diffusion barriers because of the long binding distance. We find that Li2MO2 and Na2MO2 are stable because of negative intercalation energies and unsaturated specific energies. We show that MnO2 has the lowest diffusion barrier, highest specific capacity, and smallest lattice expansion under Li-intercalation, but lowest cell voltage. We also find that CoO2 shows the largest cell voltages in a wide range of ion-intercalation densities and smallest lattice expansion under Na-intercalation, and NiO2 only gives the highest cell voltage in Li2NiO2 and has the largest volume expansion. We further show that Li and Na atoms in Li2MO2 and Na2MO2 move from stable-adsorption sites to metastable sites on the surfaces of oxide monolayers to reduce lattice expansion, leading to reduced cell voltages. It is expected that metal-ion batteries with particular applications and performances can be achieved in the design of these oxide monolayers.

Analysis of impurity effects on the coloration of corundum by laser-induced breakdown spectroscopy (LIBS).

Corundum was analyzed using laser-induced breakdown spectroscopy (LIBS) for impurity effects in their multiple colorings. Qualitative measurements were attained for impurities of chromium, magnesium, iron, and titanium in red, yellow, and blue samples. Moreover, treatment with a beryllium diffusion, which can modify corundum to obtain an attractive color, was tested in the yellow sample. In this work, most of the measurements were acquired using a laser pulse energy of 5 mJ and impurity emissions were appreciable. The signal-to-noise ratios were 11, 6.5, 10, and 4 for the Cr 425.44 nm, Fe 404.58 nm, Be 313.04 nm, and Mg 285.21 nm lines, respectively, for five laser shots. The amount of damage to the corundum samples was also monitored by measuring the craters after laser analysis. It was found that the crater size was about 30 µm after 10 laser shots. As such, the damage to corundum sample is almost imperceptible after the LIBS analysis.