Severity influences categorical likelihood communications: A case study with Southeast Asian weather forecasters.

Risk assessments are common in multiple domains, from finance to medicine. They require evaluating an event's potential severity and likelihood. We investigate the possible dependence of likelihood and severity within the domain of impact-based weather forecasting (IBF), following predictions derived from considering asymmetric loss functions. In a collaboration between UK psychologists and partners from four meteorological organisations in Southeast Asia, we conducted two studies (N = 363) eliciting weather warnings from forecasters. Forecasters provided warnings denoting higher likelihoods for high severity impacts than low severity impacts, despite these impacts being described as having the same explicit numerical likelihood of occurrence. This 'Severity effect' is pervasive, and we find it can have a continued influence even for an updated forecast. It is additionally observed when translating warnings made on a risk matrix to numerical probabilities.

Review on personal protective equipment: Emerging concerns in micro(nano)plastic pollution and strategies for addressing environmental challenges.

The COVID-19 pandemic was caused by the SARS-CoV-2 virus, marking one of the most catastrophic global health crises of the 21st century. Throughout this period, widespread use and improper disposal of personal protective equipment (PPE) emerged as a pressing environmental issue, significantly impacting various life forms. During the COVID-19 pandemic, there was a high rate of PEP disposal. An alarming 1.6 × 106 tons of plastic waste each day has been generated since the onset of the outbreak, predominantly from the inadequate disposal of PPE. The mismanagement and subsequent degradation of discarded PPE significantly contribute to increased non-biodegradable micro(nano)plastic (MNP) waste. This pollution has had profound adverse effects on terrestrial, marine, and aquatic ecosystems, which have been extensively of concern recently. Accumulated MNPs within aquatic organisms could serve as a potential route for human exposure when consuming seafood. This review presents a novel aspect concerning the pollution caused by MNPs, particularly remarking on their role during the pandemic and their detrimental effects on human health. These microplastic particles, through the process of fragmentation, transform into nanoparticles, persisting in the environment and posing potential hazards. The prevalence of MNP from PPE, notably masks, raises concerns about their plausible health risks, warranting global attention and comprehensive exploration. Conducting a comprehensive evaluation of the long-term effects of these processes and implementing effective management strategies is essential.

Applications of engineered biochar in remediation of heavy metal(loid)s pollution from wastewater: Current perspectives toward sustainable development goals.

Environmental pollution of heavy metal(loid)s (HMs) caused adverse impacts, has become one of the emerging concerns and challenges worldwide. Metal(loid)s can pose significant threats to living organisms even when present in trace levels within environmental matrices. Extended exposure to these substances can lead to adverse health consequences in humans. Removing HM-contaminated water and moving toward sustainable development goals (SDGs) is critical. In this mission, biochar has recently gained attention in the environmental sector as a green and alternative material for wastewater removal. This work provides a comprehensive analysis of the remediation of typical HMs by biochars, associated with an understanding of remediation mechanisms, and gives practical solutions for ecologically sustainable. Applying engineered biochar in various fields, especially with nanoscale biochar-aided wastewater treatment approaches, can eliminate hazardous metal(loid) contaminants, highlighting an environmentally friendly and low-cost method. Surface modification of engineered biochar with nanomaterials is a potential strategy that positively influences its sorption capacity to remove contaminants. The research findings highlighted the biochars' ability to adsorb HM ions based on increased specific surface area (SSA), heightened porosity, and forming inner-sphere complexes with oxygen-rich groups. Utilizing biochar modification emerged as a viable approach for addressing lead (Pb), cadmium (Cd), arsenic (As), mercury (Hg), and chromium (Cr) pollution in aqueous environments. Most biochars investigated demonstrated a removal efficiency >90 % (Cd, As, Hg) and can reach an impressive 99 % (Pb and Cr). Furthermore, biochar and advanced engineered applications are also considered alternative solutions based on the circular economy.

Occurrence and fate of pharmaceutical pollutants in wastewater: Insights on ecotoxicity, health risk, and state-of-the-art removal.

Pharmaceutical active compound (PhAC) residues are considered an emerging micropollutant that enters the aquatic environment and causes harmful ecotoxicity. The significant sources of PhACs in the environment include the pharmaceutical industry, hospital streams, and agricultural wastes (animal husbandry). Recent investigations demonstrated that wastewater treatment plants (WWTPs) are an important source of PhACs discharging ecosystems. Several commonly reported that PhACs are detected in a range level from ng L-1 to µg L-1 concentration in WWTP effluents. These compounds can have acute and chronic adverse impacts on natural wildlife, including flora and fauna. The approaches for PhAC removals in WWTPs include bioremediation, adsorption (e.g., biochar, chitosan, and graphene), and advanced oxidation processes (AOPs). Overall, adsorption and AOPs can effectively remove PhACs from wastewater aided by oxidizing radicals. Heterogeneous photocatalysis has also proved to be a sustainable solution. Bioremediation approaches such as membrane bioreactors (MBRs), constructed wetlands (CWs), and microalgal-based systems were applied to minimize pharmaceutical pollution. Noteworthy, applying MBRs has illustrated high removal efficiencies of up to 99%, promising prospective future. However, WWTPs should be combined with advanced solutions, e.g., AOPs/photodegradation, microalgae-bacteria consortia, etc., to treat and minimize their accumulation. More effective and novel technologies (e.g., new generation bioremediation) for PhAC degradation must be investigated and specially designed for a low-cost and full-scale. Investigating green and eco-friendly PhACs with advantages, e.g., low persistence, no bioaccumulation, less or non-toxicity, and environmentally friendly, is also necessary.

RNA therapeutics for the treatment of blood disorders.

Blood disorders are defined as diseases related to the structure, function, and formation of blood cells. These diseases lead to increased years of life loss, reduced quality of life, and increased financial burden for social security systems around the world. Common blood disorder treatments such as using chemical drugs, organ transplants, or stem cell therapy have not yet approached the best goals, and treatment costs are also very high. RNA with a research history dating back several decades has emerged as a potential method to treat hematological diseases. A number of clinical trials have been conducted to pave the way for the use of RNA molecules to cure blood disorders. This novel approach takes advantage of regulatory mechanisms and the versatility of RNA-based oligonucleotides to target genes and cellular pathways involved in the pathogenesis of specific diseases. Despite positive results, currently, there is no RNA drug to treat blood-related diseases approved or marketed. Before the clinical adoption of RNA-based therapies, challenges such as safe delivery of RNA molecules to the target site and off-target effects of injected RNA in the body need to be addressed. In brief, RNA-based therapies open novel avenues for the treatment of hematological diseases, and clinical trials for approval and practical use of RNA-targeted are crucial.

A mini-review on plasticrusts: occurrence, current trends, potential threats, and recommendations for coastal sustainability.

Plasticrusts manifest as a coating on intertidal rocks due to environmental exposure. They refer to crushed plastic debris that blankets rocks found along intertidal shorelines. This study significantly contributes to a better understanding of the occurrence of these novel plastic formations, shedding light on their potential pathways of formation during the Anthropocene era. The research provides comprehensive insights into the composition, origins, challenges, and effective management strategies for removing coastal plastic litter. The findings of this investigation offer valuable evidence regarding the formation and impact of these recently discovered plastic items in coastal regions, prompting discussions about their formation processes and their effects on the marine ecosystem. Recognizing that these newly emerged plastic litter pose a considerable threat to the marine environment is crucial. With their emergence, we face an environmental challenge, especially concerning the health of coastal ecosystems. Plasticrusts, when degraded, can release microplastics (MPs) and nanoparticles (NPs) into the surrounding environment. These micro- and nano-sized plastic particles pose significant ecological risks as they persist in ecosystems, potentially harming wildlife and entering the food chain, causing widespread environmental contamination. Significantly, it outlines strategies to minimize the impact of this emerging plastic debris and its source.

A comprehensive review of micro- and nano-plastics in the atmosphere: Occurrence, fate, toxicity, and strategies for risk reduction.

Micro- and nano-plastics (MNPs) have received considerable attention over the past 10 years due to their environmental prevalence and potential toxic effects. With the increase in global plastic production and disposal, MNP pollution has become a topic of emerging concern. In this review, we describe MNPs in the atmospheric environment, and potential toxicological effects of exposure to MNPs. Studies have reported the occurrence of MNPs in outdoor and indoor air at concentrations ranging from 0.0065 items m-3 to 1583 items m-3. Findings have identified plastic fragments, fibers, and films in sizes predominantly <1000 µm with polyamide (PA), polyester (PES), polyethylene terephthalate (PET), polypropylene (PP), rayon, polyethylene (PE), polystyrene (PS), polyvinyl chloride (PVC), polyacrylonitrile (PAN), and ethyl vinyl acetate (EVA) as the major compounds. Exposure through indoor air and dust is an important pathway for humans. Airborne MNPs pose health risks to plants, animals, and humans. Atmospheric MNPs can enter organism bodies via inhalation and subsequent deposition in the lungs, which triggers inflammation and other adverse health effects. MNPs could be eliminated through source reduction, policy/regulation, environmental awareness and education, biodegradable materials, bioremediation, and efficient air-filtration systems. To achieve a sustainable society, it is crucial to implement effective strategies for reducing the usage of single-use plastics (SUPs). Further, governments play a pivotal role in addressing the pressing issue of MNPs pollution and must establish viable solutions to tackle this significant challenge.

Ecotoxicity of micro- and nanoplastics on aquatic algae: Facts, challenges, and future opportunities.

The production of plastic has exponentially increased in recent years, leading to the release of millions of tons of plastic waste into the environment annually. This waste can break down into smaller micro- and nanoplastics (MNPs) that are toxic and reactive to life forms, including humans. MNPs are particularly concerning for marine biologists and environmental scientists due to their toxic impacts on aquatic organisms, including algae, which are the foundation of the food chain. The review provides a comprehensive overview of the (eco)toxicity assessment of MNPs on aquatic algal communities, highlighting the novel insights gained into the ecotoxicity of various MNPs on algae and the associated health risks for aquatic ecosystems, food chains, and humans. This article also discusses current challenges and future research opportunities to address these challenges, making it a valuable contribution to the field of environmental science. Overall, this work is one of the first efforts to comprehensively assess the effects of MNPs on aquatic algae, emphasizing the significant risks that MNPs pose to essential ecosystems and human health.

Emergence of microplastics in the aquatic ecosystem and their potential effects on health risks: The insights into Vietnam.

The increase of microplastic contamination in Vietnam is a growing concern due to various domestic, agricultural, and industrial activities. The use of plastic mulch and sludge application in agricultural farmland, textile production, daily consumer items, cleaning agents, and health/personal care products contribute significantly to the increasing microplastic pollution in the aquatic ecosystem. The concentration of microplastics reported in surface water ranged from 0.35 to 519,000 items m-3, with fibers and fragments being the most prevalent shapes. Notably, the high concentration of microplastics was observed in lakes, canals, and megacities such as Ha Noi and Ho Chi Minh City, which poses potential health risks to the local community via drinking-water supply and food chains. As an emerging pollutant, MPs are the transport vectors for contaminants in environmental matrices that act as a carrier of hazardous pollutants, release toxic compounds, and evenly aggregate/accumulate in biota. Recent studies have reported the presence of microplastics in various marine organisms, including fish and shellfish, highlighting the risk of ingestion of these particles by humans and wildlife. Thus, it is imperative to monitor microplastic contamination in the ecosystem to provide helpful information for the government and local communities. Efforts should be taken to reduce microplastic pollution at the source to minimize potential effects on ecological and health safety. This review paper emphasizes the urgent need for further research on microplastic pollution in Vietnam and highlights potential solutions to mitigate this emerging environmental threat. KEYWORKS: single-use plastics; microplastics; ecosystems; plastic waste; health risk; ecological and health safety; pollution mitigation.

Occurrence, fate, and potential risk of pharmaceutical pollutants in agriculture: Challenges and environmentally friendly solutions.

In recent years, pharmaceutical active compounds (PhACs) have attained global prevalence. The behavior of PhACs in agricultural soils is complex and depends on several factors, such as the nature of the compounds and their physicochemical characteristics, which affect their fate and potential threats to human health, ecosystems, and the environment. The detection of residual pharmaceutical content is possible in both agricultural soils and environmental matrices. PhACs are commonly found in agricultural soil, with concentrations varying significantly, ranging from as low as 0.048 ng g-1 to as high as 1420.76 mg kg-1. The distribution and persistence of PhACs in agriculture can lead to the leaching of these toxic pollutants into surface water, groundwater, and vegetables/plants, resulting in human health risks and environmental pollution. Biological degradation or bioremediation plays a critical role in environmental protection and efficiently eliminates contamination by hydrolytic and/or photochemical reactions. Membrane bioreactors (MBRs) have been investigated as the most recent approach for the treatment of emerging persistent micropollutants, including PhACs, from wastewater sources. MBR- based technologies have proven to be effective in eliminating pharmaceutical compounds, achieving removal rates of up to 100%. This remarkable outcome is primarily facilitated by the processes of biodegradation and metabolization. In addition, phytoremediation (i.e., constructed wetlands), microalgae-based technologies, and composting can be highly efficient in remediating PhACs in the environment. The exploration of key mechanisms involved in pharmaceutical degradation has revealed a range of approaches, such as phytoextraction, phytostabilization, phytoaccumulation, enhanced rhizosphere biodegradation, and phytovolatilization. The well-known advanced/tertiary removal of sustainable sorption by biochar, activated carbon, chitosan, etc. has high potential and yields excellent quality effluents. Adsorbents developed from agricultural by-products have been recognized to eliminate pharmaceutical compounds and are cost-effective and eco-friendly. However, to reduce the potentially harmful impacts of PhACs, it is necessary to focus on advanced technologies combined with tertiary processes that have low cost, high efficiency, and are energy-saving to remove these emerging pollutants for sustainable development.

Organic composts as A vehicle for the entry of microplastics into the environment: A comprehensive review.

Plastic pollution is a widespread issue that poses a threat to agroecosystems. Recent data on microplastic (MP) pollution from compost and its application to soil have highlighted the potential impact of micropollutants that may be transferred from compost. Thus, we aim with this review to elucidate the distribution-occurrence, characterization, fate/transport, and potential risk of MPs from organic compost to gain comprehensive knowledge and mitigate the adverse impacts of compost application. The concentration of MPs in compost was up to thousands of items/kg. Among micropollutants, fibers, fragments, and films are the most common, with small MPs having a higher potential to absorb other pollutants and cause harm to organisms. Various synthetic polymers, including polyethylene (PE), polypropylene (PP), polyethylene terephthalate (PET), polystyrene (PS), polyvinyl chloride (PVC), polyester (PES), and acrylic polymers (AP), have been widely used of plastic items. MPs are emerging pollutants that can have diverse effects on soil ecosystems, as they can transfer potential pollutants from MPs to compost and then to the soil. Following the microbial degradation scheme, the transfer chain from plastics to compost to soil can be broken down into main stages, i.e., colonization - (bio)fragmentation - assimilation - and mineralization. Microorganisms and adding biochar play an essential role during composting, which can be an effective solution to enhance MP degradation. Findings have shown that stimulating free radical generation could promote the biodegradation efficacy of MPs and possibly remove their occurrence in compost, thereby reducing their contribution to ecosystem pollution. Furthermore, future recommendations were discussed to reduce ecosystem risks and health challenges.

Efficient Rigorous Coupled-Wave Analysis Simulation of Mueller Matrix Ellipsometry of Three-Dimensional Multilayer Nanostructures.

Mueller matrix ellipsometry (MME) is a powerful metrology tool for nanomanufacturing. The application of MME necessitates electromagnetic computations for inverse problems of metrology determination in both the conventional optimization process and the recent neutral network approach. In this study, we present an efficient, rigorous coupled-wave analysis (RCWA) simulation of multilayer nanostructures to quantify reflected waves, enabling the fast simulation of the corresponding Mueller matrix. Wave propagations in the component layers are characterized by local scattering matrices (s-matrices), which are efficiently computed and integrated into the global s-matrix of the structures to describe the optical responses. The performance of our work is demonstrated through three-dimensional (3D) multilayer nanohole structures in the practical case of industrial Muller matrix measurements of optical diffusers. Another case of plasmonic biosensing is also used to validate our work in simulating full optical responses. The results show significant numerical improvements for the examples, demonstrating the gain in using the RCWA method to address the metrological studies of multilayer nanodevices.

Microplastics in sewage sludge: Distribution, toxicity, identification methods, and engineered technologies.

Microplastic pollution is becoming a global challenge due to its long-term accumulation in the environment, causing adverse effects on human health and the ecosystem. Sludge discharged from wastewater treatment plants (WWTPs) plays a critical role as a carrier and primary source of environmental microplastic contamination. A significantly average microplastic variation between 1000 and 301,400 particles kg-1 has been reported in the sludge samples. In recent years, advanced technologies have been successfully applied to address this issue, including adsorption, advanced oxidation processes (AOPs), and membrane bioreactors (MBRs). Adsorption technologies are essential to utilizing novel adsorbents (e.g., biochar, graphene, zeolites) for effectively removing MPs. Especially, the removal efficiency of polymer microspheres from an aqueous solution by Mg/Zn modified magnetic biochars (Mg/Zn-MBC) was obtained at more than 95%. Also, advanced oxidation processes (AOPs) are widely applied to degrade microplastic contaminants, in which photocatalytic by semiconductors (e.g., TiO2 and ZnO) is a highly suitable approach to promote the degradation reactions owing to strongly hydroxyl radicals (OH*). Biological degradation-aided microorganisms (e.g., bacterial and fungal strains) have been reported to be suitable for removing microplastics. Yet, it was affected by biotic and abiotic factors of the environmental conditions (e.g., pH, light, temperature, moisture, bio-surfactants, microorganisms, enzymes) as well as their polymer characteristics, i.e., molecular weight, functional groups, and crystallinity. Notably, membrane bioreactors (MBRs) showed the highest efficiency in removing up to 99% microplastic particles and minimizing their contamination in sewage sludge. Further, MBRs illustrate the suitability for treating high-strength compounds, e.g., polymer debris and microplastic fibers from complex industrial wastewater. Finally, this study provided a comprehensive understanding of potential adverse risks, transportation pathways, and removal mechanisms of microplastic, which full-filled the knowledge gaps in this field.

The Optimal Cut-Off Point of the ADNEX Model for the Prediction of the Ovarian Cancer Risk

Objective: This study aimed to assess the effectiveness and determine the optimal cut-off point of the ADNEX model in women presenting with a pelvic or adnexal tumor. Method: All women presented with adnexal mass and were scheduled for operation at Hue University of Medicine and Pharmacy Hospital and Hue Central Hospital, Vietnam during June 2019 ­ May 2021 were included and categorized according to their histopathologic reports into ovarian cancer groups and benign ovarian tumor groups. Multivariable logistic regression was used to explore for potential predictors. The ADNEX model with and without CA125 was used to assess the risk of ovarian cancer preoperative. The goldden standard to evaluate the accuracy of ultrasonography using the ADNEX model was the pathological report. In addition, the accuracy as well as optimum cut-off point of the ADNEX model was estimated with and without CA125. Results: A total of 461 participants were included in analysis and predictive model development, 65 patients in ovarian cancer group and 361 in benign tumor group. The ADNEX model combined with CA125 proved to be a useful predictor with an area under ROC of 0.961 (0.940 ­ 0.977) with Youden's index of 0.8395, p < 0.001. The ADNEX model without CA125 also had high predictive value between benign and malignant tumors, with an area under ROC of 0.956 (0.933 ­ 0.973) with Youden's index of 0.8551, p < 0.001. Cut-off of the ADNEX with CA125 was 13.5 and without CA125 was 13.1 for sensitivities were 90.8 (81.0 ­ 96.5) and 93.9 (85.0 ­ 97.5), specificities 93.2 (90.2 ­ 95.5) and 91.67 (88.5 ­ 94.2). The difference in the predictive value of malignancy-risk between the ADNEX model with CA125, without CA125 was not statistically significant, p=0.4883. Conclusion: The ADNEX model, with or without the combining marker CA 125, provides a valuable predictive value for ovarian tumor malignancy preoperative.

Risk factors for disease severity and mortality of children with Covid-19: A study at a Vietnamese Children's hospital.

INTRODUCTION: To find out risk factors for disease severity and mortality of pediatric COVID-19 in the fourth wave of COVID-19 in Vietnam. METHODS: This retrospective cohort study was performed at Children's Hospital 1 from July to December 2021. All children with COVID-19 confirmed by a positive Realtime RT-PCR SARS-CoV-2 result and treated at COVID-19 department for at least 72 h were included. RESULTS: Of the 850 cases admitting to COVID-19 department, 555 children with COVID-19 confirmed by positive RT-PCR and treated at our center for more than 72 h. Median age of confirmed cases was 22.3 (IQR: 3.2-88.6) months, 55.1% were male, and 84.5% had a history of close contact with confirmed COVID-19 patients. The rate of mild, moderate and severe/critical cases was 73,7%, 9.0% and 17.3%, respectively. One hundred ninety-two children (34.6%) had underlying diseases, in which, neurologic disease was the most common underlying disease (7.9%). Underlying disease, dyspnea, elevated CRP >20 mg/L and elevated ferritin were independent factors related to severe illness. Twenty-point two percent of patients in our study needed respiratory support, including 22 invasive mechanical ventilation cases. Eighteen cases (3.2%) died because of severe comorbidities, poor response to treatment. CONCLUSIONS: In our study, the severe/critical and mortality rates in pediatric COVID-19 cases were relatively high. All fatal cases had severe comorbidities. Underlying disease, dyspnea, and elevated inflammatory markers were independent factors related to severity in pediatric COVID-19 cases.

Anaerobic fermentation of rice bran using rumen liquor for desirable chemical changes as animal feed.

Objective: The objectives of this research are to overcome the limitations of rice bran (RB) and de-oiled rice bran (DORB) by fermentation anaerobically using inoculum from the rumen of a canulated sheep for desirable chemical changes. Materials and Methods: Initially, RB and DORB were fermented by 10% rumen liquor for 12 h at 39°C at different moisture levels (10, 20, 30, 40, 50, and 60% phosphate buffer). Again, DORB was fermented for 24, 48, and 72 h at 39°C using 10% rumen liquor at different moisture levels (10, 20, 30, 40, 50, and 60% phosphate buffer). Before and after fermentation, RB and DORB were analyzed for pH, proximate components, neutral detergent fiber (NDF), total-P, inorganic-P, and phytate-P. Results: Fermentation of RB and DORB for 12 h reduced (p < 0.05) pH, crude fiber (CF),NDF, and phytate-P, but increased (p < 0.05) the content of inorganic-P. Subsequent fermentation of DORB for 24, 48, and 72 h reduced pH, CF, and NDF. Total-P of fermented DORB remained similar till 72 h fermentation (p < 0.05). But, inorganic-P increased with the increasing duration (24, 48, and 72 h) of fermentation and increased (30, 40, and 50) moisture level (p < 0.05). Alternatively, phytate-P decreased with increasing duration and moisture level (p < 0.05). Conclusion: Inoculation of rumen microbes and incubation of RB (12 h) and DORB (24 h) at room temperature reduced phytate-P and fiber content (CF and NDF) when the moisture level was up to 50%; those are the indicators to reduce the limitation of RB and DORB to use as feed for non-ruminant animals like poultry and pigs.

The Analgesic Properties of Corydalis yanhusuo.

Corydalis yanhusuo extract (YHS) has been used for centuries across Asia for pain relief. The extract is made up of more than 160 compounds and has been identified as alkaloids, organic acids, volatile oils, amino acids, alcohols, and sugars. However, the most crucial biological active constituents of YHS are alkaloids; more than 80 have been isolated and identified. This review paper aims to provide a comprehensive review of the phytochemical and pharmacological effects of these alkaloids that have significant ties to analgesia.