Water metal contaminants in a potentially mineral-deficient population of Haiti.

This study aimed to characterize metal contaminant concentrations and assess temporal and spatial variability in the main drinking water sources of Cap-Haïtien, Haiti. Water sources from five communities were sampled in two seasons, June (2014) and October (2014), and analysed for a suite of metals. A geographic information system was used to examine the spatial distribution of sampling points. Metal concentrations were below the US Environmental Protection Agency (USEPA) primary drinking water standards. Mean manganese concentrations were comparatively higher in wells (254.5 µg/L), exceeding the USEPA secondary drinking water standard (50 µg/L). Higher mean Mg/Ca and Ba/Ca ratios (range 2.3-3.4) may indicate different interactions between seawater and groundwater throughout the year. Although metal concentrations were within the limits of the USEPA drinking water standards, emerging contaminants, such as manganese, showed concentrations in excess of recommended limits. These metals may interact with background nutritional status with potential implications for growth and development.

Screening for early detection of parkinsonism using a self-administered questionnaire: a cross-sectional epidemiologic study.

BACKGROUND: Manganese (Mn) is a common component of welding fume. Exposure to Mn fume has been associated with parkinsonism. A simple and reliable screening tool to evaluate Mn exposed workers for neurotoxic injury would have broad occupational health application. METHODS: This study investigated 490 occupational welders recruited from a trade union list. Subjects were examined by a movement disorders specialist using the Unified Parkinson Disease Rating Scale motor subsection 3 (UPDRS3). Parkinsonism, intermediate, and normal groups were defined as UPDRS3 score ≥ 15, 6-15, and <6, respectively. Workers completed a health status questionnaire (PDQ39) and a Parkinson disease (PD) Symptoms Questionnaire. Areas under receiver operator curve (AUC) were analyzed based on these scores, adjusted for age, smoking, race, gender, and neurologist, using normal as the reference. RESULTS: The AUC was 0.79 (95% confidence interval [CI]=0.73-0.84) for PDQ39 and 0.78 (95% CI=0.72-0.85) for PD Symptoms Questionnaire score. At 70% sensitivity, the specificity for PDQ39 score and PD Symptoms Questionnaire score for the prediction of parkinsonism was 73.1% and 80.1%, respectively. CONCLUSIONS: These results suggest the questionnaires have reasonably good sensitivity and specificity to predict parkinsonism in Mn exposed workers. These questionnaires could be a valuable first step in a tiered screening approach for Mn exposed workers.

Increased risk of parkinsonism associated with welding exposure.

OBJECTIVE: Manganese (Mn), an established neurotoxicant, is a common component of welding fume. The neurological phenotype associated with welding exposures has not been well described. Prior epidemiologic evidence linking occupational welding to parkinsonism is mixed, and remains controversial. METHODS: This was a cross-sectional and nested case-control study to investigate the prevalence and phenotype of parkinsonism among 811 shipyard and fabrication welders recruited from trade unions. Two reference groups included 59 non-welder trade workers and 118 newly diagnosed, untreated idiopathic PD patients. Study subjects were examined by a movement disorders specialist using the Unified Parkinson Disease Rating Scale motor subsection 3 (UPDRS3). Parkinsonism cases were defined as welders with UPDRS3 score ≥15. Normal was defined as UPDRS3<6. Exposure was classified as intensity adjusted, cumulative years of welding. Adjusted prevalence ratios for parkinsonism were calculated in relation to quartiles of welding years. RESULTS: The overall prevalence estimate of parkinsonism was 15.6% in welding exposed workers compared to 0% in the reference group. Among welders, we observed a U-shaped dose-response relation between weighted welding exposure-years and parkinsonism. UPDRS3 scores for most domains were similar between welders and newly diagnosed idiopathic Parkinson disease (PD) patients, except for greater frequency of rest tremor and asymmetry in PD patients. CONCLUSION: This work-site based study among welders demonstrates a high prevalence of parkinsonism compared to nonwelding-exposed workers and a clinical phenotype that overlaps substantially with PD.

Basal ganglia intensity indices and diffusion weighted imaging in manganese-exposed welders.

OBJECTIVES: Manganese exposure leads to diffuse cerebral metal deposition with the highest concentration in the globus pallidus associated with increased T1-weighted MRI signal. T1 signal intensity in extra-pallidal basal ganglia (caudate and putamen) has not been studied in occupationally exposed workers. Diffusion weighted imaging is a non-invasive measure of neuronal damage and may provide a quantification of neurotoxicity associated with welding and manganese exposure. This study investigated extra-pallidal T1 basal ganglia signal intensity as a marker of manganese exposure and basal ganglia diffusion weighted imaging abnormalities as a potential marker of neurotoxicity. METHODS: A 3T MR case:control imaging study was performed on 18 welders and 18 age- and gender-matched controls. Basal ganglia regions of interest were identified for each subject. T1-weighted intensity indices and apparent diffusion coefficients were generated for each region. RESULTS: All regional indices were higher in welders than controls (p ≤ 0.05). Combined basal ganglia (ρ = 0.610), caudate (ρ = 0.645), anterior (ρ = 0.595) and posterior putamen (ρ = 0.511) indices were more correlated with exposure than pallidal (ρ = 0.484) index. Welder apparent diffusion coefficient values were lower than controls for globus pallidus (p = 0.03) and anterior putamen (p = 0.004). CONCLUSIONS: Welders demonstrated elevated T1 indices throughout the basal ganglia. Combined basal ganglia, caudate and putamen indices were more correlated with exposure than pallidal index suggesting more inclusive basal ganglia sampling results in better exposure markers. Elevated indices were associated with diffusion weighted abnormalities in the pallidum and anterior putamen suggesting neurotoxicity in these regions.

Effects of parkinsonism on health status in welding exposed workers.

BACKGROUND: Previous studies suggest that welders frequently display parkinsonian signs, such as bradykinesia and tremor. Demonstrating that these parkinsonian findings are associated with reductions in quality of life (QoL) or health status could have important repercussions for worker safety and performance. METHODS: Subjects included 394 active workers exposed to welding fumes and evaluated for parkinsonism by movement disorders experts in a worksite-based epidemiology study. Subjects were diagnosed with parkinsonism if the Unified Parkinson Disease Rating Scale motor subsection part 3 (UPDRS3) score was ≥15. All subjects completed a Parkinson's disease (PD) symptom questionnaire and the PDQ39, a widely used QoL and health status measure for PD. RESULTS: Total PDQ39 score and all subscores were greater in welders with parkinsonism than welders without parkinsonism, with the most significant differences observed for mobility, emotional well-being, and activities of daily living (ADL's). The PDQ39 scores for welding exposed workers with parkinsonism were similar to scores seen in a group of early PD patients. CONCLUSION: Parkinsonism in active, welding exposed workers is associated with reductions in health status and QoL affecting a broad range of categories and within the range seen in early PD.

Development and evaluation of an integrated asthma awareness curriculum for the elementary school classroom.

Asthma is one of the most common causes of school absenteeism, and many children are affected by, or encounter, it in the school setting. An integrated curriculum that presents asthma as a real world example can raise all children's awareness and understanding of asthma, not just those with the condition. A 15-lesson, asthma-based curriculum was developed to integrate with and enhance the core subjects of math, science, and communication arts. A pilot test was performed in fourth- and fifth-grade classes to assess student asthma knowledge gain, teacher acceptance, and grade appropriateness of the curriculum. During the 2006-2007 school year, 15 teachers were recruited from the St. Louis, MO, USA area to assess the curriculum through teaching and administering pre- and post-unit tests and completing a teacher evaluation for each lesson taught. Four additional classrooms served as comparisons. Paired t tests were used for each lesson taught, to evaluate pre-/post-test and classroom differences, and focus groups were used for qualitative evaluation. There was an increase in asthma knowledge between pre- and post-tests in both grades, individually and combined (p < 0.001). Intervention post-test scores were higher than comparison classroom scores (p < 0.001). Teacher feedback indicated that the lessons enhanced previously learned skills and increased students' overall understanding of asthma. Offering asthma education in the classroom can provide an opportunity for all students to gain asthma knowledge and build health literacy about a leading chronic disease in school-aged children.

Estimation of particulate mass and manganese exposure levels among welders.

BACKGROUND: Welders are frequently exposed to Manganese (Mn), which may increase the risk of neurological impairment. Historical exposure estimates for welding-exposed workers are needed for epidemiological studies evaluating the relationship between welding and neurological or other health outcomes. The objective of this study was to develop and validate a multivariate model to estimate quantitative levels of welding fume exposures based on welding particulate mass and Mn concentrations reported in the published literature. METHODS: Articles that described welding particulate and Mn exposures during field welding activities were identified through a comprehensive literature search. Summary measures of exposure and related determinants such as year of sampling, welding process performed, type of ventilation used, degree of enclosure, base metal, and location of sampling filter were extracted from each article. The natural log of the reported arithmetic mean exposure level was used as the dependent variable in model building, while the independent variables included the exposure determinants. Cross-validation was performed to aid in model selection and to evaluate the generalizability of the models. RESULTS: A total of 33 particulate and 27 Mn means were included in the regression analysis. The final model explained 76% of the variability in the mean exposures and included welding process and degree of enclosure as predictors. There was very little change in the explained variability and root mean squared error between the final model and its cross-validation model indicating the final model is robust given the available data. CONCLUSIONS: This model may be improved with more detailed exposure determinants; however, the relatively large amount of variance explained by the final model along with the positive generalizability results of the cross-validation increases the confidence that the estimates derived from this model can be used for estimating welder exposures in absence of individual measurement data.

Validity and reliability of an occupational exposure questionnaire for parkinsonism in welders.

This study assessed the validity and test-retest reliability of a medical and occupational history questionnaire for workers performing welding in the shipyard industry. This self-report questionnaire was developed for an epidemiologic study of the risk of parkinsonism in welders. Validity participants recruited from three similar shipyards were asked to give consent for access to personnel files and complete the questionnaire. Responses on the questionnaire were compared with information extracted from personnel records. Reliability participants were recruited from the same shipyards and were asked to complete the questionnaire at two different times approximately 4 weeks apart. Percent agreement, kappa, intraclass correlation coefficient (ICC), and sensitivity and specificity were used as measures of validity and/or reliability. Personnel files were obtained for 101 of 143 participants (70%) in the validity study, and 56 of the 95 (58.9%) participants in the reliability study completed the retest of the questionnaire. Validity scores for items extracted from personnel files were high. Percent agreement for employment dates and job titles ranged from 83-100%, while ICC for start and stop dates ranged from 0.93-0.99. Sensitivity and specificity for current job title ranged from 0.5-1.0. Reliability scores for demographic, medical and health behavior items were mainly moderate or high, but ranged from 0.19 to 1.0. Most recent job/title items such as title, types of welding performed, and material used showed substantial to perfect agreement. Certain determinants of exposure such as days and hours per week exposed to welding fumes demonstrated mainly moderate agreement (kappa= 0.42-0.47, percent agreement 63-77%); however, mean days and hours reported did not differ between test and retest. The results of this study suggest that participants' self-report for job title and dates employed are valid compared with employer records. While kappa scores were low for some medical conditions and for caffeine consumption, high kappa scores for job title, dates worked, types of welding, and materials welded suggest participants generated reproducible answers important for occupational exposure assessment.