RESUMO
Gas tungsten arc welding (GTAW) is commonly used for joining pipelines; however, it often leads to discoloration in the heat-affected zone (HAZ). In this study, 316L pipes were welded with different concentrations of oxygen present in the argon purge gas during welding. The objective of this study was to investigate the effect of oxygen concentration in the protective gas on the pitting corrosion resistance of welded pipes. The experimental results showed that the thickness of the oxide layer formed in the HAZ depends on the concentration of oxygen in the protective gas. Increasing the oxygen concentration in the protective gas resulted in an increase in pitting corrosion resistance until a critical value, beyond which the resistance decreased. The results showed that the thickness of the oxide layer formed in the HAZ depends on the concentration of oxygen in the protective gas. Increasing the oxygen concentration in the protective gas increased the pitting corrosion resistance until a critical value, beyond which the resistance decreased due to the formation of iron oxide. This study provides valuable insights for improving the corrosion resistance of welded pipes in the oil and gas industry.
RESUMO
The authors would like to make the following corrections to the published paper [...].
RESUMO
During the first wave of the COVID-19 pandemic, industries and academic institutes have collaborated to resolve the worldwide medical supply shortage issues. Innovative designs of 3D-printed items were proposed and developed by the maker community as a temporary solution to address the lack of personal protective equipment. An overview of global ongoing and past initiatives during the COVID-19 pandemic along with their challenges on retrofitting full-face snorkeling masks for healthcare applications such as splash-proof face shields, respirator masks and non-invasive ventilation systems are reported in this contribution. This study reviews these global initiatives and challenges. From our analysis, the present situation highlights the need to build solid networks between healthcare institutes and the different rapid prototyping initiatives. A clear feedback system needs to be implemented to facilitate effective collaboration between engineering (maker) and healthcare teams, to optimize the available human resources, and to achieve adequate product developments responding to the needs of healthcare workers.
RESUMO
The COVID-19 pandemic resulted in severe shortages of personal protection equipment and non-invasive ventilation devices. As traditional supply chains could not meet up with the demand, makeshift solutions were developed and locally manufactured by rapid prototyping networks. Among the different global initiatives, retrofitting of full-face snorkeling masks for Non-Invasive-Ventilation (NIV) applications seems the most challenging. This article provides a systematic overview of rapid prototyped - 3D printed - designs that enable attachment of medical equipment to snorkeling masks, highlighting potential and challenges in additive manufacturing. The different NIV connector designs are compared on low-cost 3D fabrication time and costs, which allows a rapid assessment of developed connectors for health care workers in urgent need of retrofitting snorkeling masks for NIV purposes. Challenges and safety issues of the rapid prototyping approach for healthcare applications during the pandemic are discussed as well. When critical parameters such as the final product cost, geographical availability of the feedstock and the 3D printers and the medical efficiency of the rapid prototyped products are well considered before deploying decentralized 3D printing as manufacturing method, this rapid prototyping strategy contributed to reduce personal protective equipment and NIV shortages during the first wave of the COVID-19 pandemic. It is also concluded that it is crucial to carefully optimize material and printer parameter settings to realize best fitting and airtight connector-mask connections, which is heavily depending on the chosen feedstock and type of printer.
