Semi-metallic polymers.

Polymers are lightweight, flexible, solution-processable materials that are promising for low-cost printed electronics as well as for mass-produced and large-area applications. Previous studies demonstrated that they can possess insulating, semiconducting or metallic properties; here we report that polymers can also be semi-metallic. Semi-metals, exemplified by bismuth, graphite and telluride alloys, have no energy bandgap and a very low density of states at the Fermi level. Furthermore, they typically have a higher Seebeck coefficient and lower thermal conductivities compared with metals, thus being suitable for thermoelectric applications. We measure the thermoelectric properties of various poly(3,4-ethylenedioxythiophene) samples, and observe a marked increase in the Seebeck coefficient when the electrical conductivity is enhanced through molecular organization. This initiates the transition from a Fermi glass to a semi-metal. The high Seebeck value, the metallic conductivity at room temperature and the absence of unpaired electron spins makes polymer semi-metals attractive for thermoelectrics and spintronics.

Ultrathin polymer films for transparent electrode applications prepared by controlled nucleation.

The vacuum vapor phase polymerization (VPP) technique is capable of producing conducting polymer films with conductivities up to 3400 S cm(-1). However, the method is not able to produce robust nano-thin films as required for transparent conducting electrode (TCE) applications. We show that with the addition of aprotic solvents or chelating agents to the oxidant mixture, it is possible to control the polymerization rate, and nucleation, in the VPP process. This provides the opportunity of altering the grain size and depositing conducting polymer films with a thickness of 16 to 200 nm with resulting optical transmission within the range 50-98% that are robust enough to endure the post polymerization processing steps. The figure of merit (FoM), which is used to quantify a film's suitability for TCE applications, results in values from 12 to 25. This result indicates that the nano-films outperform most of the previously reported graphene films and approaches the accepted industry standard for TCE applications.

Large area nanostructured arrays: optical properties of metallic nanotubes.

In this study, large area metallic nanotube arrays on flexible plastic substrates are produced by templating the growth of a cosputtered alloy using anodized aluminum oxide membranes. These nanotube arrays are prepared over large areas (ca. squared centimeters) by reducing the residual stress within the thin multilayered structure. The nanotubes are approximately 20 nm in inner diameter, having walls of <10 nm in thickness, and are arranged in a close packed configuration. Optically the nanotube arrays exhibit light trapping behavior (not plasmonic), where the reflectivity is less than 15% across the visible spectra compared to >40% for a flat sample using the same alloy. When the nanotubes are exposed to high relative humidity, they spontaneously fill, with a concomitant change in their visual appearance. The filling of the nanotubes is confirmed using contact angle measurements, with the nanotubes displaying a strong hydrophilic character compared to the weak behavior of the flat sample. The ability to easily fabricate large area nanotube arrays which display exotic behavior paves the way for their uptake in real world applications such as sensors and solar energy devices.