Embodied energy comparison of surface water and groundwater supply options.

The embodied energy associated with water provision comprises an important part of water management, and is important when considering sustainability. In this study, an input-output based hybrid analysis integrated with structural path analysis was used to develop an embodied energy model. The model was applied to a groundwater supply system (Kalamazoo, Michigan) and a surface water supply system (Tampa, Florida). The two systems evaluated have comparable total energy embodiments based on unit water production. However, the onsite energy use of the groundwater supply system is approximately 27% greater than the surface water supply system. This was primarily due to more extensive pumping requirements. On the other hand, the groundwater system uses approximately 31% less indirect energy than the surface water system, mainly because of fewer chemicals used for treatment. The results from this and other studies were also compiled to provide a relative comparison of embodied energy for major water supply options.

Evaluating UV/H2O2 processes for methyl tert-butyl ether and tertiary butyl alcohol removal: effect of pretreatment options and light sources.

In this paper, we evaluate the efficiency of UV/H2O2 process to remove methyl tert-butyl ether (MtBE) and tertiary butyl alcohol (tBA) from a drinking water source. Kinetic models were used to evaluate the removal efficiency of the UV/H2O2 technologies with different pretreatment options and light sources. Two commercial UV light sources, i.e. low pressure, high intensity lamps and medium pressure, high intensity lamps, were evaluated. The following pretreatment alternatives were evaluated: (1) ion exchange softening with seawater regeneration (NaIX); (2) Pellet Softening; (3) weak acid ion exchange (WAIX); and (4) high pH lime softening followed by reverse osmosis (RO). The presence or absence of a dealkalization step prior to the UV/H2O2 Advanced Oxidation Process (AOP) was also evaluated for each pretreatment possibility. Pretreatment has a significant impact on the performance of UV/H2O2 process. The NaIX with dealkalization was shown to be the most cost effective. The electrical energy per order (EEO) values for MtBE and tBA using low pressure high output UV lamps (LPUV) and 10mg/LH2O2 are 0.77 and 3.0 kWh/kgal-order, or 0.20 and 0.79 kWh/m3-order, respectively. For medium pressure UV high output lamps (MPUV), EEO values for MtBE and tBA are 4.6 and 15 kWh/kgal-order, or 1.2 and 4.0 kWh/m3-order, for the same H2O2 dosage.

Feasibility of water purification technology in rural areas of developing countries.

Water scarcity is threatening social and economic growth in rural areas of developing countries. There are potential markets for water purification technologies in these regions. The main focus of this article is to evaluate the social, economic and political feasibilities of providing water purification technologies to rural areas of developing countries. The findings of this research can serve as the basis for private investors interested in entering this market. Four representative regions were selected for the study. Economic, demographic, and environmental variables of each region were collected and analyzed along with domestic markets and political information. Rural areas of the developing world are populated with poor people unable to fulfill the basic needs for clean water and sanitation. These people represent an important group of potential users. Due to economic, social, and political risks in these areas, it is difficult to build a strong case for any business or organization focusing on immediate returns on capital investment. A plausible business strategy would be to approach the water purification market as a corporate responsibility and social investing in the short term. This would allow an organization to be well positioned once the economic ability of individuals, governments, and donor agencies are better aligned.

Application of an isothermal, three-phase catalytic reactor model to predict unsteady-state fixed-bed performance.

CatReac, a three-phase catalytic mathematical model, was developed for analysis and optimization of the volatile reactor assembly used in International Space Station water processor. This wet oxidation process is used to remove low molecular weight contaminants such as acetic acid, acetone, ethanol, 1-propanol, 2-propanol, and propionic acid, which are not removed by the other treatment processes. The Langmuir-Hinshelwood (Hinshelwood, C. N. The Kinetics of Chemical Change in Gaseous Systems, 3rd ed.; Oxford: London, 1933; pp 301-347) isothermal adsorption expression was successfully used to describe the reaction kinetics of compounds on the catalyst surface for the compounds mentioned above. Small-column experiments combined with the use of the Arrhenius equation were successfully used to predict the Langmuir-Hinshelwood parameters under different temperatures for a temperature range from 93 to 149 degrees C. Full-scale and small-column experiments were successfully used to validate the model predictions for unsteady-state fixed-bed operations.

Sustainability science and engineering: the emergence of a new metadiscipline.

A case is made for growth of a new metadiscipline of sustainability science and engineering. This new field integrates industrial, social, and environmental processes in a global context. The skills required for this higher level discipline represent a metadisciplinary endeavor, combining information and insights across multiple disciplines and perspectives with the common goal of achieving a desired balance among economic, environmental, and societal objectives. Skills and capabilities that are required to support the new metadiscipline are summarized. Examples of integrative projects are discussed in the areas of sustainability metrics and integration of industrial, societal, and environmental impacts. It is clear that a focus on green engineering that employs pollution prevention and industrial ecology alone are not sufficient to achieve sustainability, because even systems with efficient material and energy use can overwhelm the carrying capacity of a region or lead to other socially unacceptable outcomes. To meet the educational and human resource needs required for this new discipline, the technological and environmental awareness of society must be elevated and a sufficient and diverse pool of human talent must be attracted to this discipline.