RESUMO
Introduction: Dysregulated calcium homeostasis and consequentially aberrant Ca2+ signalling could enhance survival, proliferation and metastasis in various cancers. Despite rapid development in exploring the ion channel functions in relation to cancer, most of the mechanisms accounting for the impact of ion channel modulators have yet to be fully clarified. Although harnessing small interfering RNA (siRNA) to specifically silence gene expression has the potential to be a pivotal approach, its success in therapeutic intervention is dependent on an efficient delivery system. Nanoparticles have the capacity to strongly bind siRNAs. They remain in the circulation and eventually deliver the siRNA payload to the target organ. Afterward, they interact with the cell surface and enter the cell via endocytosis. Finally, they help escape the endo-lysosomal degradation system prior to unload the siRNAs into cytosol. Carbonate apatite (CA) nanocrystals primarily is composed of Ca2+, carbonate and phosphate. CA possesses both anion and cation binding domains to target negatively charged siRNA molecules. Methods: Hybrid CA was synthesized by complexing CA NPs with a hydrophilic polysaccharide - hyaluronic acid (HA). The average diameter of the composite particles was determined using Zetasizer and FE-SEM and their zeta potential values were also measured. Results and Discussion: The stronger binding affinity and cellular uptake of a fluorescent siRNA were observed for HA-CA NPs as compared to plain CA NPs. Hybrid CA was electrostatically bound individually and combined with three different siRNAs to silence expression of calcium ion channel and transporter genes, TRPC6, TRPM8 and SLC41A1 in a human breast cancer cell line (MCF-7) and evaluate their potential for treating breast cancer. Hybrid NPs carrying TRPC6, TRPM8 and SLC41A1 siRNAs could significantly enhance cytotoxicity both in vitro and in vivo. The resultant composite CA influenced biodistribution of the delivered siRNA, facilitating reduced off target distribution and enhanced breast tumor targetability.
Assuntos
Apatitas , Neoplasias da Mama , Ácido Hialurônico , Nanopartículas , RNA Interferente Pequeno , Humanos , Apatitas/química , Apatitas/farmacologia , RNA Interferente Pequeno/química , RNA Interferente Pequeno/farmacocinética , RNA Interferente Pequeno/administração & dosagem , RNA Interferente Pequeno/farmacologia , RNA Interferente Pequeno/genética , Ácido Hialurônico/química , Neoplasias da Mama/genética , Neoplasias da Mama/metabolismo , Nanopartículas/química , Feminino , Animais , Sobrevivência Celular/efeitos dos fármacos , Linhagem Celular Tumoral , Células MCF-7 , Proliferação de Células/efeitos dos fármacos , CamundongosRESUMO
Membrane-based enantioselective separation is a promising method for chiral resolution due to its low cost and high efficiency. However, scalable fabrication of chiral separation membranes displaying both high enantioselectivity and high flux of enantiomers is still a challenge. Here, the authors report the preparation of homochiral porous organic cage (Covalent cage 3 (CC3)-R)-based enantioselective thin-film-composite membranes using polyamide (PA) as the matrix, where fully organic and solvent-processable cage crystals have good compatibility with the polymer scaffold. The hierarchical CC3-R channels consist of chiral selective windows and inner cavities, leading to favorable chiral resolution and permeation of enantiomers; the CC3-R/PA composite membranes display an enantiomeric excess of 95.2% for R-(+)-limonene over S-(-)-limonene and a high flux of 99.9 mg h-1 m-2. This work sheds light on the use of homochiral porous organic cages for preparing enantioselective membranes and demonstrates a new route for the development of next-generation chiral separation membranes.
RESUMO
The interactions of viral fusion peptides from influenza (E4K and Ac-E4K) and human immunodeficiency virus (gp41 and Ac-gp41) with planar lipid bilayers and monolayers was investigated herein. A combination of surface-sensitive techniques, including quartz crystal microbalance with dissipation (QCM-D), Langmuir-Blodgett area-pressure isotherms with Micro-Brewster angle microscopy, and neutron reflectometry, was employed. Differences in the interactions of the viral fusion peptides with lipid bilayers featuring ordered and disordered phases, as well as lipid rafts, were revealed. The HIV fusion peptide (gp41) exhibited strong binding to the DOPC/DOPS bilayer, comprising a liquid disordered phase, with neutron reflectometry (NR) showing interaction with the bilayer's headgroup area. Conversely, negligible binding was observed with lipid bilayers in a liquid ordered phase. Notably, the influenza peptide (E4K) demonstrated slower binding kinetics with DOPC/DOPS bilayers and distinct interactions compared to gp41, as observed through QCM-D. This suggests different mechanisms of interaction with the lipid bilayers: one peptide interacts more within the headgroup region, while the other is more involved in transmembrane interactions. These findings hold implications for understanding viral fusion mechanisms and developing antimicrobials and antivirals targeting membrane interactions. The differential binding behaviours of the viral fusion peptides underscore the importance of considering membrane composition and properties in therapeutic strategy design.
Assuntos
Antivirais , Proteína gp41 do Envelope de HIV , Bicamadas Lipídicas , Bicamadas Lipídicas/química , Bicamadas Lipídicas/metabolismo , Proteína gp41 do Envelope de HIV/química , Proteína gp41 do Envelope de HIV/metabolismo , Antivirais/química , Antivirais/farmacologia , Antivirais/metabolismo , Humanos , Orthomyxoviridae/efeitos dos fármacos , Orthomyxoviridae/metabolismo , Técnicas de Microbalança de Cristal de QuartzoRESUMO
Nanosheet-based membranes have shown enormous potential for energy-efficient molecular transport and separation applications, but designing these membranes for specific separations remains a great challenge due to the lack of good understanding of fluid transport mechanisms in complex nanochannels. We synthesized reduced MXene/graphene hetero-channel membranes with sub-1-nm pores for experimental measurements and theoretical modeling of their structures and fluid transport rates. Our experiments showed that upon complete rejection of salt and organic dyes, these membranes with subnanometer channels exhibit remarkably high solvent fluxes, and their solvent transport behavior is very different from their homo-structured counterparts. We proposed a subcontinuum flow model that enables accurate prediction of solvent flux in sub-1-nm slit-pore membranes by building a direct relationship between the solvent molecule-channel wall interaction and flux from the confined physical properties of a liquid and the structural parameters of the membranes. This work provides a basis for the rational design of nanosheet-based membranes for advanced separation and emerging nanofluidics.
RESUMO
Inhalation of pharmaceutical aerosol formulations is widely used to treat respiratory diseases. Spatially resolved thermal characterization offers promise for better understanding drug release rates from particles; however, this has been an analytical challenge due to the small particle size (from a few micrometers down to nanometers) and the complex composition of the formulations. Here, we employ nano-thermal analysis (nanoTA) to probe the nanothermal domain of a pharmaceutical aerosol formulation containing a mixture of fluticasone propionate (FP), salmeterol xinafoate (SX), and excipient lactose, which is widely used to treat asthma and chronic obstructive pulmonary disease (COPD). Furthermore, atomic force microscopy-infrared spectroscopy (AFM-IR) and AFM force measurements are performed to provide nanochemical and nanomechanical information to complement the nanothermal data. The colocalized thermal and chemical mapping clearly reveals the surface heterogeneity of the drugs in the aerosol particles and demonstrates the contribution of the surface chemical composition to the variation in the thermal properties of the particles. We present a powerful analytical approach for in-depth characterization of thermal/chemical/morphological properties of dry powder inhaler particles at micro- and nanometer scales. This approach can be used to facilitate the comparison between generics and reference inhalation products and further the development of high-performance pharmaceutical formulations.
Assuntos
Aerossóis , Inaladores de Pó Seco , Fluticasona , Lactose , Microscopia de Força Atômica , Tamanho da Partícula , Pós , Xinafoato de Salmeterol , Fluticasona/química , Fluticasona/administração & dosagem , Xinafoato de Salmeterol/química , Xinafoato de Salmeterol/administração & dosagem , Lactose/química , Microscopia de Força Atômica/métodos , Excipientes/química , Administração por Inalação , Broncodilatadores/administração & dosagem , Broncodilatadores/química , Espectrofotometria Infravermelho/métodos , Química Farmacêutica/métodos , Propriedades de SuperfícieRESUMO
The production of hydrophobic and oil resistant cellulosic fibers usually requires severe chemical treatments and generates toxic by-products. Alternative approaches such as biocatalysis use milder conditions; lipase-catalyzed methods for grafting nanocellulose with hydrophobic ester moieties have been reported. Here, we investigate the lipase-catalyzed esterification of cellulose fibers, in native form or pretreated with 1,4-ß-glucanases, and cellulose nanocrystals (CNC) in solvent-free conditions. The fibers were compared for degree of ester formation after incubation with methyl myristate and lipase at 50 °C. After washing, the grafting of fatty esters on cellulose was confirmed by ATR-FTIR and the degree of substitution determined by 13C CP/MAS NMR (from 0.04 up to DS 0.1) confirming successful esterification. Optical photothermal infrared (O-PTIR) spectroscopy showed strongly localized presence of ester moieties on cellulose. Functional properties mirrored the degree of substitution of the cellulose materials whereby cellulose esters made with glucanase-pretreatment produced the highest water contact angle of 117° ± 9 and esterified cellulose blended at 10 % w/w content in paper composites showed significant differences in hydrophobicity and lipophilicity compared to plain paper. The esterification of cellulose was completely reversed by lipase treatment in aqueous media. These ester-functionalized fibers show potential in a wide range of packaging applications.
Assuntos
Celulose , Lipase , Celulose/química , Esterificação , Lipase/química , Ésteres/química , Biocatálise , Água , Interações Hidrofóbicas e HidrofílicasRESUMO
Bacteriophages or phages used as an alternative therapy for treating multi-drug resistant infections require formulation consideration. Current strategies to produce phage formulations involving organic solvents are based on empirical practices without a good understanding of phage stability during formulation development. In this study, we investigated the effect of common formulation organic solvents (ethanol, isopropyl alcohol, tetrahydrofuran (THF) and dimethyl sulfoxide (DMSO)) on the stability of Pseudomonas aeruginosa-specific myovirus (PEV1, PEV20) and podovirus (PEV31) phages using biological assay, transmission electron microscopy (TEM) and scattering near field optical microscopy (SNOM). The three phages were mixed with the solvents at different concentrations (25%, 50%, and 75% (v/v)) for 20 min. All phages were fully viable in the organic solvents at 25% (v/v) showing negligible titre changes. At the higher solvent concentration of 50% (v/v), the myoviruses PEV1 and PEV20 remained relatively stable (titre loss 0.4-1.3 log10), whereas the podovirus PEV31 became less stable (titre loss 0.25-3.8 log10), depending on the solvent used. Increasing the solvent level to 75% (v/v) caused increased morphological changes in TEM and decreased viability as indicated by the titre loss (0.32-7.4 log10), with DMSO being the most phage-destabilising solvent. SNOM spectra showed differences in the signal intensity and peak positions in the amide I and amide II regions, revealing altered phage proteins by the solvents. In conclusion, the choice of the solvents for phage formulation depends on both the phages and solvent types. Our results showed (1) the phages are more stable in the alcohols than DMSO and THF, and (2) the myoviruses tend to be more stable than the podovirus in the solvents. Overall, a low to moderate (25-50 % v/v) level of organic solvents (except 50% THF) can be used in formulation of the phages without a substantial titre loss.
Assuntos
Bacteriófagos , Podoviridae , Dimetil Sulfóxido , Solventes , Amidas/farmacologia , Pseudomonas aeruginosaRESUMO
The agglomeration and encapsulation of recoverable materials of interest (e.g. metals and graphite) as a result of the presence of polyvinylidene fluoride (PVDF) in spent lithium-ion batteries (LIBs) with mixed chemistries (black mass) lower the extraction efficiency of metals. In this study, organic solvents and alkaline solutions were used as non-toxic reagents to investigate the removal of a PVDF binder from a black mass. The results demonstrated that 33.1%, 31.4%, and 31.4% of the PVDF were removed using dimethylformamide (DMF), dimethylacetamide (DMAc), and dimethyl sulfoxide (DMSO) at 150, 160, and 180 °C, respectively. Under these conditions, the peel-off efficiencies for DMF, DMAc, and DMSO were 92.9%, 85.3%, and approximately 92.9%, respectively. Using tetrabutylammonium bromide (TBAB) as a catalyst and 5 M sodium hydroxide (NaOH) at room temperature (RT- 21 °C-23 °C), 50.3% of PVDF and other organic compounds were eliminated. The removal efficiency was enhanced to approximately 60.5% when the temperature was raised to 80 °C using NaOH. Using 5 M potassium hydroxide at RT in a TBAB-containing solution, ca. 32.8% removal efficiency was obtained; raising the temperature to 80 °C further enhanced the removal efficiency to almost 52.7%. The peel-off efficiency was 100% for both alkaline solutions. Lithium extraction increased from 47.2% to 78.7% following treatment with DMSO and to 90.1% following treatment with NaOH via leaching black mass (2 M sulfuric acid, solid-to-liquid ratio (S/L): 100 g L-1 at 50 °C, for 1 h without a reducing agent) before and after removal of the PVDF binder. Cobalt's recovery went from 28.5% to 61.3% with DMSO treatment to 74.4% with NaOH treatment.
Assuntos
Cobalto , Lítio , Dimetil Sulfóxido , Hidróxido de Sódio , Reciclagem/métodos , Fontes de Energia ElétricaRESUMO
Approximately 300,000 anterior cruciate ligament (ACL) tears occur annually in the United States, half of which lead to the onset of knee osteoarthritis within 10 years of injury. Repetitive loading is known to result in fatigue damage of both ligament and tendon in the form of collagen unravelling, which can lead to structural failure. However, the relationship between tissue's structural, compositional, and mechanical changes are poorly understood. Herein we show that repetitive submaximal loading of cadaver knees causes an increase in co-localised induction of collagen unravelling and tissue compliance, especially in regions of greater mineralisation at the ACL femoral enthesis. Upon 100 cycles of 4× bodyweight knee loading, the ACL exhibited greater unravelled collagen in highly mineralized regions across varying levels of stiffness domains as compared to unloaded controls. A decrease in the total area of the most rigid domain, and an increase in the total area of the most compliant domain was also found. The results highlight fatigue-driven changes in both protein structure and mechanics in the more mineralized regions of the ACL enthesis, a known site of clinical ACL failure. The results provide a starting point for designing studies to limit ligament overuse injury.
Assuntos
Lesões do Ligamento Cruzado Anterior , Ligamento Cruzado Anterior , Humanos , Fenômenos Biomecânicos , Articulação do Joelho , Fadiga , ColágenoRESUMO
Biomimetic cubic phases can be used for protein encapsulation in a variety of applications such as biosensors and drug delivery. Cubic phases with a high concentration of cholesterol and phospholipids were obtained herein. It is shown that the cubic phase structure can be maintained with a higher concentration of biomimetic membrane additives than has been reported previously. Opposing effects on the curvature of the membrane were observed upon the addition of phospholipids and cholesterol. Furthermore, the coronavirus fusion peptide significantly increased the negative curvature of the biomimetic membrane with cholesterol. We show that the viral fusion peptide can undergo structural changes leading to the formation of hydrophobic α-helices that insert into the lipid bilayer. This is of high importance, as a fusion peptide that induces increased negative curvature as shown by the formation of inverse hexagonal phases allows for greater contact area between two membranes, which is required for viral fusion to occur. The cytotoxicity assay showed that the toxicity toward HeLa cells was dramatically decreased when the cholesterol or peptide level in the nanoparticles increased. This suggests that the addition of cholesterol can improve the biocompatibility of the cubic phase nanoparticles, making them safer for use in biomedical applications. As the results, this work improves the potential for the biomedical end-use applications of the nonlamellar lipid nanoparticles and shows the need of systematic formulation studies due to the complex interplay of all components.
Assuntos
Coronavirus , Humanos , Biomimética , Células HeLa , Peptídeos/farmacologia , Peptídeos/química , Fosfolipídeos/química , Bicamadas Lipídicas/química , ColesterolRESUMO
BACKGROUND: Overuse ligament and tendon injuries are prevalent among recreational and competitive adolescent athletes. In vitro studies of the ligament and tendon suggest that mechanical overuse musculoskeletal injuries begin with collagen triple-helix unraveling, leading to collagen laxity and matrix damage. However, there are little in vivo data concerning this mechanism or the physiomechanical response to collagen disruption, particularly regarding the anterior cruciate ligament (ACL). PURPOSE: To develop and validate a novel in vivo animal model for investigating the physiomechanical response to ACL collagen matrix damage accumulation and propagation in the ACL midsubstance, fibrocartilaginous entheses, and subchondral bone. STUDY DESIGN: Controlled laboratory study. METHODS: C57BL/6J adolescent inbred mice underwent 3 moderate to strenuous ACL fatigue loading sessions with a 72-hour recovery between sessions. Before each session, randomly selected subsets of mice (n = 12) were euthanized for quantifying collagen matrix damage (percent collagen unraveling) and ACL mechanics (strength and stiffness). This enabled the quasi-longitudinal assessment of collagen matrix damage accrual and whole tissue mechanical property changes across fatigue sessions. Additionally, all cyclic loading data were quantified to evaluate changes in knee mechanics (stiffness and hysteresis) across fatigue sessions. RESULTS: Moderate to strenuous fatigue loading across 3 sessions led to a 24% weaker (P = .07) and 35% less stiff (P < .01) ACL compared with nonloaded controls. The unraveled collagen densities within the fatigued ACL and entheseal matrices after the second and third sessions were 38% (P < .01) and 15% (P = .02) higher compared with the nonloaded controls. CONCLUSION: This study confirmed the hypothesis that in vivo ACL collagen matrix damage increases with tissue fatigue sessions, adversely impacting ACL mechanical properties. Moreover, the in vivo ACL findings were consistent with in vitro overloading research in humans. CLINICAL RELEVANCE: The outcomes from this study support the use of this model for investigating ACL overuse injuries.
Assuntos
Lesões do Ligamento Cruzado Anterior , Reconstrução do Ligamento Cruzado Anterior , Transtornos Traumáticos Cumulativos , Humanos , Adolescente , Camundongos , Animais , Ligamento Cruzado Anterior/cirurgia , Camundongos Endogâmicos C57BL , Articulação do Joelho/cirurgia , Lesões do Ligamento Cruzado Anterior/cirurgia , Colágeno , Fenômenos BiomecânicosRESUMO
Chiral separation membranes have shown great potential for the efficient separation of racemic mixtures into enantiopure components for many applications, such as in the food and pharmaceutical industries; however, scalable fabrication of membranes with both high enantioselectivity and flux remains a challenge. Herein, enantiopure S-poly(2,4-dimethyl-2-oxazoline) (S-PdMeOx) macromonomers were synthesized and used to prepare a new type of enantioselective membrane consisting of a chiral S-PdMeOx network scaffolded by graphene oxide (GO) nanosheets. The S-PdMeOx-based membrane showed a near-quantitative enantiomeric excess (ee) (98.3±1.7 %) of S-(-)-limonene over R-(+)-limonene and a flux of 0.32â mmol m-2 h-1 . This work demonstrates the potential of homochiral poly(2,4-disubstituted-2-oxazoline)s in chiral discrimination and provides a new route to the development of highly efficient enantioselective membranes using synthetic homochiral polymer networks.
RESUMO
The aim of this research was to chemically analyse the distribution of drugs and excipients in pharmaceutical dry powder inhalation (DPI) aerosol particles of various sizes in solid state. The conventional wet assay of the chemical composition of particles after collection in a cascade impactor lacks the capability to differentiate spatially resolved morphology and chemical composition of particles in complex DPI formulations. In this proof-of-concept study, we aim to demonstrate the feasibility of using optical photothermal infrared spectroscopy (O-PTIR) to characterize micro- to nano-scale chemical composition of size-segregated particles of pharmaceutical DPI formulations. These formulations were prepared by spray drying a solution or a suspension comprising an inhaled corticosteroid fluticasone propionate, a long-acting ß2-agonist salmeterol xinafoate, and excipient lactose. The active ingredients fluticasone propionate and salmeterol xinafoate are widely used for the treatment of asthma and chronic obstructive pulmonary disease. Spatially resolved O-PTIR spectra acquired from the particles collected from stages 1-7 of a Next Generation Impactor (NGI) for both formulations confirmed the presence of peaks related to fluticasone propionate (1746 cm-1, 1702 cm-1, 1661 cm-1 and 1612 cm-1), salmeterol xinafoate (1582 cm-1), and lactose (1080 cm-1). There was no significant difference in the drug to lactose peak ratio among various size fractions of particles spray dried from solution indicating a homogeneity in drug and lactose content in the aerosol formulation. In contrast, the suspension-spray dried formulation showed the drug content increased while the lactose content decreased in the particles collected down the NGI from stage 1 to stage 7, indicating heterogeneity in the ratio of drug-excipient distribution. The qualitative chemical compositions from O-PTIR were comparable to conventional wet chemical assays of various size fractions, indicating the suitability of O-PTIR to serve as a valuable analytical platform for screening the physicochemical properties of DPIs in solid state.
Assuntos
Excipientes , Lactose , Pós/química , Excipientes/química , Lactose/química , Química Farmacêutica/métodos , Aerossóis e Gotículas Respiratórios , Fluticasona/química , Xinafoato de Salmeterol/química , Administração por Inalação , Análise Espectral , Aerossóis/química , Tamanho da Partícula , Inaladores de Pó Seco/métodosRESUMO
The development of effective drug delivery systems requires in-depth characterization of the micro- or nanostructure of the material vectors with high spatial resolution, resulting in a deep understanding of the design-function relationship and maximum therapeutic efficacy. Atomic force microscopy-infrared spectroscopy (AFM-IR) combines the high spatial resolution of AFM and the capabilities of IR spectroscopy to identify chemical composition and it has emerged as a powerful tool for the detailed characterization of a drug delivery system at the nanoscale. In addition, the instruments also allow thermal and mechanical evaluation at the nanoscale. In this review, we highlight the applications of AFM-IR in various drug delivery systems, including polymer-based carriers, lipid-contained nanocarriers, and metal-based nanocarriers. The existing challenges as well as the future perspectives for the application of AFM-IR for drug delivery vector characterization are also discussed.
Assuntos
Nanoestruturas , Polímeros , Humanos , Microscopia de Força Atômica/métodos , Polímeros/química , Espectrofotometria Infravermelho/métodos , Sistemas de Liberação de MedicamentosRESUMO
Messenger RNA (mRNA) recently emerged as an appealing alternative to treat and prevent diseases ranging from cancer and Alzheimer's disease to COVID-19 with significant clinical outputs. The in vitro-transcribed mRNA has been engineered to mimic the structure of natural mRNA for vaccination, cancer immunotherapy and protein replacement therapy. In past decades, significant progress has been noticed in unveiling the molecular pathways of mRNA, controlling its translatability and stability, and its evolutionary defense mechanism. However, numerous unsolved structural, biological, and technical difficulties hamper the successful implementation of systemic delivery of mRNA for safer human consumption. Advances in designing and manufacturing mRNA and selecting innovative delivery vehicles are mandatory to address the unresolved issues and achieve the full potential of mRNA drugs. Despite the substantial efforts made to improve the intracellular delivery of mRNA drugs, challenges associated with diverse applications in different routes still exist. This study examines the current progress of mRNA therapeutics and advancements in designing biomaterials and delivery strategies, the existing translational challenges of clinical tractability and the prospects of overcoming any challenges related to mRNA.
Assuntos
COVID-19 , Nanopartículas , Neoplasias , Humanos , RNA Mensageiro/genética , RNA Mensageiro/metabolismo , COVID-19/terapia , Nanopartículas/química , Sistemas de Liberação de Medicamentos , Imunoterapia , Preparações Farmacêuticas , Neoplasias/terapia , Neoplasias/tratamento farmacológicoRESUMO
The phase (solid, semisolid, or liquid) of atmospheric aerosols is central to their ability to take up water or undergo heterogeneous reactions. In recent years, the unexpected prevalence of viscous organic particles has been shown through field measurements and global atmospheric modeling. The aerosol phase has been predicted using glass transition temperatures (Tg), which were estimated based on molecular weight, oxygen:carbon ratio, and chemical formulae of organic species present in atmospheric particles via studies of bulk materials. However, at the most important sizes for cloud nucleation (â¼50-500 nm), particles are complex mixtures of numerous organic species, inorganic salts, and water with substantial particle-to-particle variability. To date, direct measurements of Tg have not been feasible for individual atmospheric particles. Herein, nanothermal analysis (NanoTA), which uses a resistively heated atomic force microscopy (AFM) probe, is combined with AFM photothermal infrared (AFM-PTIR) spectroscopy to determine the Tg and composition of individual particles down to 76 nm in diameter at ambient temperature and pressure. Laboratory-generated proxies for organic aerosol (sucrose, ouabain, raffinose, and maltoheptaose) had similar Tg values to bulk Tg values measured with differential scanning calorimetry (DSC) and the Tg predictions used in atmospheric models. Laboratory-generated phase-separated particles and ambient particles were analyzed with NanoTA + AFM-PTIR showing intraparticle variation in composition and Tg. These results demonstrate the potential for NanoTA + AFM-PTIR to increase our understanding of viscosity within submicrometer atmospheric particles with complex phases, morphologies, and compositions, which will enable improved modeling of aerosol impacts on clouds and climate.
Assuntos
Água , Aerossóis/química , Microscopia de Força Atômica/métodos , Tamanho da Partícula , Temperatura , Temperatura de TransiçãoRESUMO
PURPOSE: Certain types of repetitive sub-maximal knee loading cause microfatigue damage in the human anterior cruciate ligament (ACL) that can accumulate to produce macroscopic tissue failure. However, monitoring the progression of that ACL microfatigue damage as a function of loading cycles has not been reported. To explore the fatigue process, a confocal laser endomicroscope (CLEM) was employed to capture sub-micron resolution fluorescence images of the tissue in situ. The goal of this study was to quantify the in situ changes in ACL autofluorescence (AF) signal intensity and collagen microstructure as a function of the number of loading cycles. METHODS: Three paired and four single cadaveric knees were subjected to a repeated 4 times bodyweight landing maneuver known to strain the ACL. The paired knees were used to compare the development of ACL microfatigue damage on the loaded knee after 100 consecutive loading cycles, relative to the contralateral unloaded control knee, through second harmonic generation (SHG) and AF imaging using confocal microscopy (CM). The four single knees were used for monitoring progressive ACL microfatigue damage development by AF imaging using CLEM. RESULTS: The loaded knees from each pair exhibited a statistically significant increase in AF signal intensity and decrease in SHG signal intensity as compared to the contralateral control knees. Additionally, the anisotropy of the collagen fibers in the loaded knees increased as indicated by the reduced coherency coefficient. Two out of the four single knee ACLs failed during fatigue loading, and they exhibited an order of magnitude higher increase in autofluorescence intensity per loading cycle as compared to the intact knees. Of the three regions of the ACL - proximal, midsubstance and distal - the proximal region of ACL fibers exhibited the highest AF intensity change and anisotropy of fibers. CONCLUSIONS: CLEM can capture changes in ACL AF and collagen microstructures in situ during and after microfatigue damage development. Results suggest a large increase in AF may occur in the final few cycles immediately prior to or at failure, representing a greater plastic deformation of the tissue. This reinforces the argument that existing microfatigue damage can accumulate to induce bulk mechanical failure in ACL injuries. The variation in fiber organization changes in the ACL regions with application of load is consistent with the known differences in loading distribution at the ACL femoral enthesis.
RESUMO
Atomic force microscopy-infrared spectroscopy (AFM-IR) and optical photothermal infrared spectroscopy (O-PTIR), which feature spectroscopic imaging spatial resolution down to â¼ 50 nm and â¼ 500 nm, respectively, were employed to characterize the nano- to microscale chemical compositional changes in bone. Since these changes are known to be age dependent, fluorescently labelled bone samples were employed. The average matrix/mineral ratio values decrease as the bone tissue matures as measured by both AFM-IR and O-PTIR, which agrees with previously published FTIR and Raman spectroscopy results. IR ratio maps obtained by AFM-IR reveal variation in matrix/mineral ratio-generating micron-scale bands running parallel to the bone surface as well as smaller domains within these bands ranging from â¼ 50 to 700 nm in size, which is consistent with the previously published length scale of nanomechanical heterogeneity. The matrix/mineral changes do not exhibit a smooth gradient with tissue age. Rather, the matrix/mineral transition occurs sharply within the length scale of 100-200 nm. O-PTIR also reveals matrix/mineral band domains running parallel to the bone surface, resulting in waves of matrix/mineral ratios progressing from the youngest to most mature tissue. Both AFM-IR and O-PTIR show a greater variation in matrix/mineral ratio value for younger tissue as compared to older tissue. Together, this data confirms O-PTIR and AFM-IR as techniques that visualize bulk spectroscopic data consistent with higher-order imaging techniques such as Raman and FTIR, while revealing novel insight into how mineralization patterns vary as bone tissue ages.
Assuntos
Osso e Ossos , Análise Espectral Raman , Microscopia de Força Atômica/métodos , Minerais , Espectrofotometria Infravermelho/métodos , Espectroscopia de Infravermelho com Transformada de Fourier/métodos , Análise Espectral Raman/métodosRESUMO
Folate receptor (FR) overexpression in a wide range of solid tumors provides an opportunity to develop novel, targeted cancer therapeutics. In this study, we investigated whether prebinding the chemotherapeutic methotrexate (MTX) to folate-binding protein (FBP), the soluble form of FR, would enable the protein to serve as a targeted therapeutic vector, enhancing uptake into tumor cells and improving therapeutic efficacy. In an in vivo study, using an FR-overexpressing KB xenograft model in SCID mice, modest improvement in inhibiting tumor growth was observed for the MTX/FBP mixtures as compared to saline control and free MTX. Surprisingly, FBP alone inhibited tumor growth compared to saline control, free MTX, and FBP/MTX. In order to better understand this effect, we investigated the cytotoxicity of micromolar concentrations of FBP in vitro using the KB, HeLa, and A549 cancer cell lines. Our results revealed concentration-dependent apoptosis (24 h; 10-50 µM) in all three cell lines accompanied by a time- and concentration-dependent reduction (6, 12, and 24 h; 10-50 µM) in metabolic activity and compromised cell plasma membrane integrity. This study demonstrates an apoptosis pathway for cytotoxicity of FBP, an endogenous serum protein, in cancer cell lines with widely varying levels of FR expression. Furthermore, in vivo tumor growth suppression for xenograft KB tumors in SCID mice was observed. These studies suggest novel strategies for the elimination of cancer cells employing endogenous, serum transport proteins.
Assuntos
Proteínas de Transporte , Ácido Fólico , Animais , Proteínas de Transporte/metabolismo , Receptores de Folato com Âncoras de GPI , Ácido Fólico/metabolismo , Humanos , Metotrexato/farmacologia , Metotrexato/uso terapêutico , Camundongos , Camundongos SCIDRESUMO
Rapid serology platforms are essential in disease pandemics for a variety of applications, including epidemiological surveillance, contact tracing, vaccination monitoring, and primary diagnosis in resource-limited areas. Laboratory-based enzyme-linked immunosorbent assay (ELISA) platforms are inherently multistep processes that require trained personnel and are of relatively limited throughput. As an alternative, agglutination-based systems have been developed; however, they rely on donor red blood cells and are not yet available for high-throughput screening. Column agglutination tests are a mainstay of pretransfusion blood typing and can be performed at a range of scales, ranging from manual through to fully automated testing. Here, we describe a column agglutination test using colored microbeads coated with recombinant SARS-CoV-2 spike protein that agglutinates when incubated with serum samples collected from patients recently infected with SARS-CoV-2. After confirming specific agglutination, we optimized centrifugal force and time to distinguish samples from uninfected vs SARS-CoV-2-infected individuals and then showed concordant results against ELISA for 22 clinical samples, and also a set of serial bleeds from one donor at days 6-10 postinfection. Our study demonstrates the use of a simple, scalable, and rapid diagnostic platform that can be tailored to detect antibodies raised against SARS-CoV-2 and can be easily integrated with established laboratory frameworks worldwide.