The after-effects of occupational whole-body vibration on human cognitive, visual, and motor function: A systematic review.

Whole-body vibration (WBV) is prevalent in labour-related activities and can have adverse effects on the health and performance of the individuals exposed. However, evidence regarding the extent to which human functionality is affected following occupational WBV exposure has not been collated. The current systematic review sought to synthesize existing literature and assess the strength and direction of evidence regarding the acute after-effects of occupational WBV exposure on cognition, visual function, postural stability, and motor control. We conducted a comprehensive search of AMED, CINAHL, MEDLINE, PubMED, Psychology and Behavioural Sciences Collection, SPORTDiscus, APA PsychInfo, Cochrane Library, EMBASE, HMIC, Global Health, ProQuest Central, Scopus, Web of Science, and the US National Technical Information Service on April 26, 2023. Studies that quantified vibration exposure and measured acute changes in cognition, visual function, postural stability, and motor control from baseline to post-vibration were considered without date restriction. Out of the 2663 studies identified, 32 were eligible for inclusion. Based on the Risk of Bias in Non-Randomized Studies of Exposure (ROBINS-E) tool, the studies demonstrated low (66%), moderate (25%) and high risk of bias (9%). The findings indicate that after exposure to WBV, postural stability either deteriorates or remains unchanged. Inconsistent effects of WBV on cognition were reported, while visual function and motor control showed no pronounced changes following WBV. This might be attributed to assessment limitations such as learning effects in neuropsychological and motor tasks, and non-functional measures of vision employed. There was a lack of consistency in the characterization of vibration exposure and the assessment of associated effects on functional performance. Current evidence is therefore insufficient to provide definitive guidance for updating occupational health and safety regulations regarding WBV. However, this review highlights the potential for WBV to jeopardize post-exposure human performance and, consequently, safety. The completion of the review was supported by a UKRI EPSRC training grant. The review has been registered on PROSPERO (ref CRD42023391075).

The role of biomechanical factors in models of intervertebral disc degeneration across multiple length scales.

Low back pain is the leading cause of disability, producing a substantial socio-economic burden on healthcare systems worldwide. Intervertebral disc (IVD) degeneration is a primary cause of lower back pain, and while regenerative therapies aimed at full functional recovery of the disc have been developed in recent years, no commercially available, approved devices or therapies for the regeneration of the IVD currently exist. In the development of these new approaches, numerous models for mechanical stimulation and preclinical assessment, including in vitro cell studies using microfluidics, ex vivo organ studies coupled with bioreactors and mechanical testing rigs, and in vivo testing in a variety of large and small animals, have emerged. These approaches have provided different capabilities, certainly improving the preclinical evaluation of these regenerative therapies, but challenges within the research environment, and compromises relating to non-representative mechanical stimulation and unrealistic test conditions, remain to be resolved. In this review, insights into the ideal characteristics of a disc model for the testing of IVD regenerative approaches are first assessed. Key learnings from in vivo, ex vivo, and in vitro IVD models under mechanical loading stimulation to date are presented alongside the merits and limitations of each model based on the physiological resemblance to the human IVD environment (biological and mechanical) as well as the possible feedback and output measurements for each approach. When moving from simplified in vitro models to ex vivo and in vivo approaches, the complexity increases resulting in less controllable models but providing a better representation of the physiological environment. Although cost, time, and ethical constraints are dependent on each approach, they escalate with the model complexity. These constraints are discussed and weighted as part of the characteristics of each model.

Thunder road - whole-body vibration during road cycling, and the effect of different seatpost designs to minimise it.

Exposure to whole-body vibration (WBV) increases the risk of low back pain, spinal degeneration, and injury. Cycling can expose participants to WBV, but there are limited data available. This preliminary study quantified WBV in road cyclists in accordance with ISO 2631-1, and determined the efficacy of two seatposts designed to minimise vibration, compared to an aluminium alloy seatpost. Sensors were used to measure the root-mean-squared acceleration (arms), frequency-weighted arms based on an eight-hour reference period (A(8)), vibration dose value (VDV), and transmissibility. Exposures were also calculated using the root-sum-of-squares of the frequency-weighted arms in all three axes (A(8)rss and VDVrss). The mean±95% confidence interval A(8)rss and VDVrss across all tests was 0.58 ± 0.07 ms-2 and 37.19 ± 4.70 ms-1.75 respectively at the saddle, if and 0.49 ± 0.06 ms-2 and 24.31 ± 2.89 ms-1.75 respectively at the lumbar position. Occupational limits were exceeded with all seatposts, and there were no significant differences between them (p > 0.227). Road cycling results in substantial WBV, and there was no evidence that the seatposts designed to minimise vibrations successfully do so. Further research into the effect of cycling conditions and equipment on WBV would be valuable to both the research and cycling communities.

Influence of testing environment and loading rate on intervertebral disc compressive mechanics: An assessment of repeatability at three different laboratories.

In vitro mechanical testing of intervertebral discs is crucial for basic science and pre-clinical testing. Generally, these tests aim to replicate in vivo conditions, but simplifications are necessary in specimen preparation and mechanical testing due to complexities in both structure and the loading conditions required to replicate in vivo conditions. There has been a growing interest in developing a consensus of testing protocols within the spine community to improve comparison of results between studies. The objective of this study was to perform axial compression experiments on bovine bone-disc-bone specimens at three institutions. No differences were observed between testing environment being air, with PBS soaked gauze, or a PBS bath (P > .206). A 100-fold increase in loading rate resulted in a small (2%) but significant increase in compressive mechanics (P < .017). A 7% difference in compressive stiffness between Labs B and C was eliminated when values were adjusted for test system compliance. Specimens tested at Lab A, however, were found to be stiffer than specimens from Lab B and C. Even after normalizing for disc geometry and adjusting for system compliance, an ∼35% difference was observed between UK based labs (B and C) and the USA based lab (A). Large differences in specimen stiffness may be due to genetic differences between breeds or in agricultural feed and use of growth hormones; highlighting significant challenges in comparing mechanics data across studies. This research provides a standardized test protocol for the comparison of spinal specimens and provides steps towards understanding how location and test set-up may affect biomechanical results.

Viscoelastic properties of biopolymer hydrogels determined by Brillouin spectroscopy: A probe of tissue micromechanics.

Many problems in mechanobiology urgently require characterization of the micromechanical properties of cells and tissues. Brillouin light scattering has been proposed as an emerging optical elastography technique to meet this need. However, the information contained in the Brillouin spectrum is still a matter of debate because of fundamental problems in understanding the role of water in biomechanics and in relating the Brillouin data to low-frequency macroscopic mechanical parameters. Here, we investigate this question using gelatin as a model system in which the macroscopic physical properties can be manipulated to mimic all the relevant biological states of matter, ranging from the liquid to the gel and the glassy phase. We demonstrate that Brillouin spectroscopy is able to reveal both the elastic and viscous properties of biopolymers that are central to the structure and function of biological tissues.

Pain After Whole-Body Vibration Exposure Is Frequency Dependent and Independent of the Resonant Frequency: Lessons From an In Vivo Rat Model.

Occupational whole-body vibration (WBV) increases the risk of developing low back and neck pain; yet, there has also been an increased use of therapeutic WBV in recent years. Although the resonant frequency (fr) of the spine decreases as the exposure acceleration increases, effects of varying the vibration profile, including peak-to-peak displacement (sptp), root-mean-squared acceleration (arms), and frequency (f), on pain onset are not known. An established in vivo rat model of WBV was used to characterize the resonance of the spine using sinusoidal sweeps. The relationship between arms and fr was defined and implemented to assess behavioral sensitivity-a proxy for pain. Five groups were subjected to a single 30-min exposure, each with a different vibration profile, and a sham group underwent only anesthesia exposure. The behavioral sensitivity was assessed at baseline and for 7 days following WBV-exposure. Only WBV at 8 Hz induced behavioral sensitivity, and the higher arms exposure at 8 Hz led to a more robust pain response. These results suggest that the development of pain is frequency-dependent, but further research into the mechanisms leading to pain is warranted to fully understand which WBV profiles may be detrimental or beneficial.

Musculoskeletal modelling of the human cervical spine for the investigation of injury mechanisms during axial impacts.

Head collisions in sport can result in catastrophic injuries to the cervical spine. Musculoskeletal modelling can help analyse the relationship between motion, external forces and internal loads that lead to injury. However, impact specific musculoskeletal models are lacking as current viscoelastic values used to describe cervical spine joint dynamics have been obtained from unrepresentative quasi-static or static experiments. The aim of this study was to develop and validate a cervical spine musculoskeletal model for use in axial impacts. Cervical spine specimens (C2-C6) were tested under measured sub-catastrophic loads and the resulting 3D motion of the vertebrae was measured. Specimen specific musculoskeletal models were then created and used to estimate the axial and shear viscoelastic (stiffness and damping) properties of the joints through an optimisation algorithm that minimised tracking errors between measured and simulated kinematics. A five-fold cross validation and a Monte Carlo sensitivity analysis were conducted to assess the performance of the newly estimated parameters. The impact-specific parameters were integrated in a population specific musculoskeletal model and used to assess cervical spine loads measured from Rugby union impacts compared to available models. Results of the optimisation showed a larger increase of axial joint stiffness compared to axial damping and shear viscoelastic parameters for all models. The sensitivity analysis revealed that lower values of axial stiffness and shear damping reduced the models performance considerably compared to other degrees of freedom. The impact-specific parameters integrated in the population specific model estimated more appropriate joint displacements for axial head impacts compared to available models and are therefore more suited for injury mechanism analysis.

The equivalence of multi-axis spine systems: Recommended stiffness limits using a standardized testing protocol.

The complexity of multi-axis spine testing often makes it challenging to compare results from different studies. The aim of this work was to develop and implement a standardized testing protocol across three six-axis spine systems, compare them, and provide stiffness and phase angle limits against which other test systems can be compared. Standardized synthetic lumbar specimens (n=5), comprising three springs embedded in polymer at each end, were tested on each system using pure moments in flexion-extension, lateral bending, and axial rotation. Tests were performed using sine and triangle waves with an amplitude of 8Nm, a frequency of 0.1Hz, and with axial preloads of 0 and 500N. The stiffness, phase angle, and R2 value of the moment against rotation in the principal axis were calculated at the center of each specimen. The tracking error was adopted asa measure of each test system to minimize non-principal loads, defined as the root mean squared difference between actual and target loads. All three test systems demonstrated similar stiffnesses, with small (<14%) but significant differences in 4 of 12 tests. More variability was observed in the phase angle between the principal axis moment and rotation, with significant differences in 10 of 12 tests. Stiffness and phase angle limits were calculated based on the 95% confidence intervals from all three systems. These recommendations can be used with the standard specimen and testing protocol by other research institutions to ensure equivalence of different spine systems, increasing the ability to compare in vitro spine studies.

Non-invasive vibrometry-based diagnostic detection of acetabular cup loosening in total hip replacement (THR).

Total hip replacement is aimed at relieving pain and restoring function. Currently, imaging techniques are primarily used as a clinical diagnosis and follow-up method. However, these are unreliable for detecting early loosening, and this has led to the proposal of novel techniques such as vibrometry. The present study had two aims, namely, the validation of the outcomes of a previous work related to loosening detection, and the provision of a more realistic anatomical representation of the clinical scenario. The acetabular cup loosening conditions (secure, and 1 and 2 mm spherical loosening) considered were simulated using Sawbones composite bones. The excitation signal was introduced in the femoral lateral condyle region using a frequency range of 100-1500 Hz. Both the 1 and 2 mm spherical loosening conditions were successfully distinguished from the secure condition, with a favourable frequency range of 500-1500 Hz. The results of this study represent a key advance on previous research into vibrometric detection of acetabular loosening using geometrically realistic model, and demonstrate the clinical potential of this technique.

The Physiological Basis of Cervical Facet-Mediated Persistent Pain: Basic Science and Clinical Challenges.

Synopsis Chronic neck pain is a common condition and a primary clinical symptom of whiplash and other spinal injuries. Loading-induced neck injuries produce abnormal kinematics between the vertebrae, with the potential to injure facet joints and the afferent fibers that innervate the specific joint tissues, including the capsular ligament. Mechanoreceptive and nociceptive afferents that innervate the facet have their peripheral terminals in the capsule, cell bodies in the dorsal root ganglia, and terminal processes in the spinal cord. As such, biomechanical loading of these afferents can initiate nociceptive signaling in the peripheral and central nervous systems. Their activation depends on the local mechanical environment of the joint and encodes the neural processes that initiate pain and lead to its persistence. This commentary reviews the complex anatomical, biomechanical, and physiological consequences of facet-mediated whiplash injury and pain. The clinical presentation of facet-mediated pain is complex in its sensory and emotional components. Yet, human studies are limited in their ability to elucidate the physiological mechanisms by which abnormal facet loading leads to pain. Over the past decade, however, in vivo models of cervical facet injury that reproduce clinical pain symptoms have been developed and used to define the complicated and multifaceted electrophysiological, inflammatory, and nociceptive signaling cascades that are involved in the pathophysiology of whiplash facet pain. Integrating the whiplash-like mechanics in vivo and in vitro allows transmission of pathophysiological mechanisms across scales, with the hope of informing clinical management. Yet, despite these advances, many challenges remain. This commentary further describes and highlights such challenges. J Orthop Sports Phys Ther 2017;47(7):450-461. Epub 16 Jun 2017. doi:10.2519/jospt.2017.7255.

Cervical Spine Injuries: A Whole-Body Musculoskeletal Model for the Analysis of Spinal Loading.

Cervical spine trauma from sport or traffic collisions can have devastating consequences for individuals and a high societal cost. The precise mechanisms of such injuries are still unknown as investigation is hampered by the difficulty in experimentally replicating the conditions under which these injuries occur. We harness the benefits of computer simulation to report on the creation and validation of i) a generic musculoskeletal model (MASI) for the analyses of cervical spine loading in healthy subjects, and ii) a population-specific version of the model (Rugby Model), for investigating cervical spine injury mechanisms during rugby activities. The musculoskeletal models were created in OpenSim, and validated against in vivo data of a healthy subject and a rugby player performing neck and upper limb movements. The novel aspects of the Rugby Model comprise i) population-specific inertial properties and muscle parameters representing rugby forward players, and ii) a custom scapula-clavicular joint that allows the application of multiple external loads. We confirm the utility of the developed generic and population-specific models via verification steps and validation of kinematics, joint moments and neuromuscular activations during rugby scrummaging and neck functional movements, which achieve results comparable with in vivo and in vitro data. The Rugby Model was validated and used for the first time to provide insight into anatomical loading and cervical spine injury mechanisms related to rugby, whilst the MASI introduces a new computational tool to allow investigation of spinal injuries arising from other sporting activities, transport, and ergonomic applications. The models used in this study are freely available at simtk.org and allow to integrate in silico analyses with experimental approaches in injury prevention.

The application of physiological loading using a dynamic, multi-axis spine simulator.

In-vitro testing protocols used for spine studies should replicate the in-vivo load environment as closely as possible. Unconstrained moments are regularly employed to test spinal specimens in-vitro, but applying such loads dynamically using an active six-axis testing system remains a challenge. The aim of this study was to assess the capability of a custom-developed spine simulator to apply dynamic unconstrained moments with an axial preload. Flexion-extension, lateral bending, and axial rotation were applied to an L5/L6 porcine specimen at 0.1 and 0.3Hz. Non-principal moments and shear forces were minimized using load control. A 500N axial load was applied prior to tests, and held stationary during testing to assess the effect of rotational motion on axial load. Non-principal loads were minimized to within the load cell noise-floor at 0.1Hz, and within two-times the load-cell noise-floor in all but two cases at 0.3Hz. The adoption of position control in axial compression-extension resulted in axial loads with qualitative similarities to in-vivo data. This study successfully applied dynamic, unconstrained moments with a physiological preload using a six-axis control system. Future studies will investigate the application of dynamic load vectors, multi-segment specimens, and assess the effect of injury and degeneration.

Upper Cervical Spine Loading Simulating a Dynamic Low-Speed Collision Significantly Increases the Risk of Pain Compared to Quasi-Static Loading With Equivalent Neck Kinematics.

Dynamic cervical spine loading can produce facet capsule injury. Despite a large proportion of neck pain being attributable to the C2/C3 facet capsule, potential mechanisms are not understood. This study replicated low-speed frontal and rear-end traffic collisions in occiput-C3 human cadaveric cervical spine specimens and used kinematic and full-field strain analyses to assess injury. Specimens were loaded quasi-statically in flexion and extension before and after dynamic rotation of C3 at 100 deg/s. Global kinematics in the sagittal plane were tracked at 1 kHz, and C2/C3 facet capsule full-field strains were measured. Dynamic loading did not alter the kinematics from those during quasi-static (QS) loading, but maximum principal strain (MPS) and shear strain (SS) were significantly higher (p = 0.028) in dynamic flexion than for the same quasi-static conditions. The full-field strain analysis demonstrated that capsule strain was inhomogeneous, and that the peak MPS generally occurred in the anterior aspect and along the line of the C2/C3 facet joint. The strain magnitude in dynamic flexion continued to rise after the rotation of C3 had stopped, with a peak MPS of 12.52 ± 4.59% and a maximum SS of 5.34 ± 1.60%. The peak MPS in loading representative of rear-end collisions approached magnitudes previously shown to induce pain in vivo, whereas strain analysis using linear approaches across the facet joint was lower and may underestimate injury risk compared to full-field analysis. The time at which peak MPS occurred suggests that the deceleration following a collision is critical in relation to the production of injurious strains within the facet capsule.

Dynamic, six-axis stiffness matrix characteristics of the intact intervertebral disc and a disc replacement.

Thorough pre-testing is critical in assessing the likely in vivo performance of spinal devices prior to clinical use. However, there is a lack of data available concerning the dynamic testing of lumbar (porcine model) total disc replacements in all six axes under preload conditions. The aim of this study was to provide new data comparing porcine lumbar spinal specimen stiffness between the intact state and after the implantation of an unconstrained total disc replacement, in 6 degrees of freedom. The dynamic, stiffness matrix testing of six porcine lumbar isolated disc specimens was completed using triangle waves at a test frequency of 0.1 Hz. An axial preload of 500 N was applied during all testing. Specimens were tested both in the intact condition and after the implantation of the total disc replacement. Sixteen key stiffness terms were identified for the comparison of the intact and total disc replacement specimens, comprising the 6 principal stiffness terms and 10 key off-axis stiffness terms. The total disc replacement specimens were significantly different to the intact specimens in 12 of these key terms including all six principal stiffness terms. The implantation of the total disc replacement resulted in a mean reduction in the principal stiffness terms of 100%, 91%, and 98% in lateral bending, flexion-extension, and axial rotation, respectively. The novel findings of this study have demonstrated that the unconstrained, low-friction total disc replacement does not replicate the stiffness of the intact specimens. It is likely that other low-friction total disc replacements would produce similar results due to stiffness being actively minimised as part of the design of low-friction devices, without the introduction of stiffening elements or mechanisms to more accurately replicate the mechanical properties of the natural intervertebral disc. This study has demonstrated, for the first time, a method for the quantitative comparative mechanical function testing of total disc replacements and provides baseline data for the development of future devices.

Advanced Multi-Axis Spine Testing: Clinical Relevance and Research Recommendations.

Back pain and spinal degeneration affect a large proportion of the general population. The economic burden of spinal degeneration is significant, and the treatment of spinal degeneration represents a large proportion of healthcare costs. However, spinal surgery does not always provide improved clinical outcomes compared to non-surgical alternatives, and modern interventions, such as total disc replacement, may not offer clinically relevant improvements over more established procedures. Although psychological and socioeconomic factors play an important role in the development and response to back pain, the variation in clinical success is also related to the complexity of the spine, and the multi-faceted manner by which spinal degeneration often occurs. The successful surgical treatment of degenerative spinal conditions requires collaboration between surgeons, engineers, and scientists in order to provide a multi-disciplinary approach to managing the complete condition. In this review, we provide relevant background from both the clinical and the basic research perspectives, which is synthesized into several examples and recommendations for consideration in increasing translational research between communities with the goal of providing improved knowledge and care. Current clinical imaging, and multi-axis testing machines, offer great promise for future research by combining invivo kinematics and loading with in-vitro testing in six degrees of freedom to offer more accurate predictions of the performance of new spinal instrumentation. Upon synthesis of the literature, it is recommended that in-vitro tests strive to recreate as many aspects of the in-vivo environment as possible, and that a physiological preload is a critical factor in assessing spinal biomechanics in the laboratory. A greater link between surgical procedures, and the outcomes in all three anatomical planes should be considered in both the in-vivo and in-vitro settings, to provide data relevant to quality of motion, and stability.

Development of a non-invasive diagnostic technique for acetabular component loosening in total hip replacements.

Current techniques for diagnosing early loosening of a total hip replacement (THR) are ineffective, especially for the acetabular component. Accordingly, new, accurate, and quantifiable methods are required. The aim of this study was to investigate the viability of vibrational analysis for accurately detecting acetabular component loosening. A simplified acetabular model was constructed using a Sawbones(®) foam block. By placing a thin silicone layer between the acetabular component and the Sawbones block, 2- and 4-mm soft tissue membranes were simulated representing different loosening scenarios. A constant amplitude sinusoidal excitation with a sweep range of 100-1500 Hz was used. Output vibration from the model was measured using an accelerometer and an ultrasound probe. Loosening was determined from output signal features such as the number and relative strength of observed harmonic frequencies. Both measurement methods were sufficient to measure the output vibration. Vibrational analysis reliably detected loosening corresponding to both 2 and 4 mm tissue membranes at driving frequencies between 100 and 1000 Hz (p < 0.01) using the accelerometer. In contrast, ultrasound detected 2-mm loosening at a frequency range of 850-1050 Hz (p < 0.01) and 4-mm loosening at 500-950 Hz (p < 0.01).

An investigation into axial impacts of the cervical spine using digital image correlation.

BACKGROUND CONTEXT: High-energy impacts are commonly encountered during sports such as rugby union. Although catastrophic injuries resulting from such impacts are rare, the consequences can be devastating for all those involved. A greater level of understanding of cervical spine injury mechanisms is required, with the ultimate aim of minimizing such injuries. PURPOSE: The present study aimed to provide a greater understanding of cervical spine injury mechanisms, by subjecting porcine spinal specimens to impact conditions based on those measured in vivo. The impacts were investigated using high-speed digital image correlation (DIC), a method not previously adopted for spinal impact research. STUDY DESIGN: This was an in vitro biomechanical study. METHODS: Eight porcine specimens were impacted using a custom-made rig. The cranial and caudal axial loads were measured at 1 MHz. Video data were captured with two cameras at 4 kHz, providing measurements of the three-dimensional deformation and surface strain field of the specimens using DIC. RESULTS: The injuries induced on the specimens were similar to those observed clinically. The mean±standard deviation peak caudal load was 6.0±2.1 kN, which occurred 5.6±1.1 ms after impact. Damage observable with the video data occurred in six specimens, 5.4±1.1 ms after impact, and the peak surface strain at fracture initiation was 4.6±0.5%. CONCLUSIONS: This study has provided an unprecedented insight into the injury mechanisms of the cervical spine during impact loading. The posture represents a key factor in injury initiation, with lordosis of the spine increasing the likelihood of injury.

Cement brand and preparation effects cement-in-cement mantle shear strength.

Creating bi-laminar cement mantles as part of revision hip arthroplasty is well-documented but there is a lack of data concerning the effect of cement brand on the procedure. The aim of this study was to compare the shear strength of bi-laminar cement mantles using various combinations of two leading bone cement brands.Bi-laminar cement mantles were created using Simplex P with Tobramycin, and Palacos R+G: Simplex-Simplex (SS); Simplex-Palacos (SP); Palacos-Simplex (PS); and Palacos-Palacos (PP). Additionally, specimens were produced by rasping (R) the surface of the original mantle, or leaving it unrasped (U), leading to a total of eight groups (n = 10). Specimens were loaded in shear, at 0.1 mm/min, until failure, and the maximum shear strength calculated.The highest mean shear strength was found in the PSU and PSR groups (23.69 and 23.89 MPa respectively), and the lowest in the PPU group (14.70 MPa), which was significantly lower than all but two groups. Unrasped groups generally demonstrated greater standard error than rasped groups.In a further comparison to assess the effect of the new cement mantle brand, irrespective of the brand of the original mantle, Simplex significantly increased the shear strength compared to Palacos with equivalent preparation.It is recommended that the original mantle is rasped prior to injection of new cement, and that Simplex P with Tobramycin be used in preference to Palacos R+G irrespective of the existing cement type. Further research is needed to investigate more cement brands, and understand the underlying mechanisms relating to cement-in-cement procedures.

The dynamic, six-axis stiffness matrix testing of porcine spinal specimens.

BACKGROUND CONTEXT: Complex testing protocols are required to fully understand the biomechanics of the spine. There remains limited data concerning the mechanical properties of spinal specimens under dynamic loading conditions in six axes. PURPOSE: To provide new data on the mechanical properties of functional spinal unit (FSU) and isolated disc (ISD) spinal specimens in 6 df. STUDY DESIGN: Dynamic, six-axis stiffness matrix testing of porcine lumbar spinal specimens. METHODS: The stiffness matrix testing of lumbar porcine FSU (n=6) and ISD (n=6) specimens was completed in a custom six-axis spine simulator using triangle wave cycles at a frequency of 0.1 Hz. Specimens were first tested without an axial preload, then with an axial preload of 500 N, with equilibration times of both 30 and 60 minutes. RESULTS: The stiffness matrices were not symmetrical about the principal stiffness terms. The facets increased all the principal stiffness terms with the exception of axial compression-extension. Significant differences were detected in 15 stiffness terms because of the application of an axial preload in the ISD specimens, including an increase in all principal stiffness terms. There were limited differences in stiffness because of equilibration time of 30 and 60 minutes. CONCLUSIONS: The assumption of stiffness matrix symmetry used in many previous studies is not valid. The biomechanical testing of spinal specimens should be completed in 6 df, at physiologic loading rates, and incorporate the application of an axial preload. The present study has provided new data on the mechanical properties of spinal specimens and demonstrates that the dynamic stiffness matrix method provides a means to more fully understand the natural spine and quantitatively assess spinal instrumentation.

The development of a dynamic, six-axis spine simulator.

BACKGROUND CONTEXT: Although a great deal of research has been completed to characterize the stiffness of spinal specimens, there remains a limited understanding of the spine in 6 df and there is a lack of data from dynamic testing in six axes. PURPOSE: This study details the development and validation of a dynamic six-axis spine simulator. STUDY DESIGN: Biomechanical study. METHODS: A synthetic spinal specimen was used for the purpose of tuning the simulator, completing positional accuracy tests, and measuring frequency response under physiological conditions. The spine simulator was used to complete stiffness matrix tests of an L3-L4 lumbar porcine functional spinal unit. Five testing frequencies were used, ranging from quasistatic (0.00575 Hz) to dynamic (0.5 Hz). Tests were performed without an axial preload and with an axial preload of 500 N. RESULTS: The validation tests demonstrated that the simulator is capable of producing accurate positioning under loading at frequencies up to 0.5 Hz using both sine and triangle waveforms. The porcine stiffness matrix tests demonstrated that the stiffness matrix is not symmetrical about the principal stiffness diagonal. It was also shown that while an increase in test frequency generally increased the principal stiffness terms, axial preload had a much greater effect. CONCLUSIONS: The spine simulator is capable of characterizing the dynamic biomechanics of the spine in six axes and provides a means to better understand the complex behavior of the spine under physiological conditions.