RESUMO
PURPOSE: To examine how augmentation of a rotator cuff repair with inflamed versus non-inflamed bursal tissue affects tendon-to-bone healing in a rat model of rotator cuff repair. METHODS: 136 Sprague-Dawley rats were randomly assigned to an inflamed or non-inflamed bursal tissue application group. After detachment the supraspinatus tendon was re-attached with bursal tissue sewn onto the tendon-to-bone interface. The specimens were analysed biomechanically 6 and at 7 weeks and immunohistologically at 1 and at 7 weeks after surgery. RESULTS: Immunohistological results showed no significant difference in the percentage of collagen type II in the tendon-to-bone interface at 1 (p = 0.97) and 7 weeks (p = 0.42) when utilising autologous non-inflamed bursal tissue in comparison to inflamed bursal tissue specimens. The inflamed bursa group also showed no significant difference in collagen I to III quotient (p= 0.14) after surgery in comparison to post-surgery non-inflamed bursa groups. Biomechanical assessment showed that tendon stiffness (p = 0.87 resp. p = 0.1) and the tendon viscoelasticity (p = 0.12 resp. p = 0.07) was the same after 6 and 7 weeks comparing inflamed bursa to the non-inflamed bursa group. There was no significant difference (p = 0.8 resp. p = 0.97) in load to failure between in both inflamed and non-inflamed bursa groups after 6 and 7 weeks. CONCLUSION: Autologous inflamed bursal tissue derived from the Achilles bursa and implanted to the tendon-to-bone interface after rotator cuff repair facilitates the same histological and biomechanical healing response as using a non-inflamed bursa interposition in rats. CLINICAL RELEVANCE: During augmentation of a rotator cuff repair, it is irrelevant whether the bursa tissue is inflamed or not.
RESUMO
INTRODUCTION: Worldwide more and more primary knee replacements are being performed. Kinematic alignment (KA) as one of many methods of surgical alignment has been shown to have a significant impact on kinematics and function. The aim of the present study was to compare KA and mechanical alignment (MA) with regard to femorotibial kinematics. MATERIALS AND METHODS: Eight fresh frozen human specimens were tested on a knee rig during active knee flexion from 30 to 130°. Within the same specimen a medial stabilized (MS) implant design was used first with KA and then with MA. RESULTS: The femorotibial kinematics showed more internal rotation of the tibia in KA compared to MA. At the same time, there was a larger medial rotation point in KA. Both alignment methods showed femoral rollback over the knee bend. CONCLUSION: Relating to an increased internal rotation and a more precise medial pivot point, it can be concluded that KA combined with a MS implant design may partially support the reproduction of physiological knee joint mechanics.
Assuntos
Artroplastia do Joelho , Prótese do Joelho , Osteoartrite do Joelho , Humanos , Artroplastia do Joelho/métodos , Fenômenos Biomecânicos , Amplitude de Movimento Articular/fisiologia , Cadáver , Articulação do Joelho , Osteoartrite do Joelho/cirurgiaRESUMO
Purpose: The aim was to conduct a systematic literature review and meta-anaylsis to analyze the diagnostic accuracy of the external rotation stress test (ERST) for syndesmotic injuries. Methods: The systematic review was conducted according to the PRISMA-P guidelines (Prospero ID: CRD42021282457). Four common databases were searched from inception to September 29, 2021. Eligible were any studies facilitating the ERST under fluoroscopy in a defined state of syndesmotic instability. Syndesmotic ligament-specific rupture must have been proven by MRI, arthroscopy, or controlled dissection (cadaver study). Two reviewers independently conducted each step of the systematic literature review. The risk of bias was assessed by the Quality Appraisal for Cadaveric Studies Score scale. The data analysis was performed qualitatively and quantitatively. Results: Eight studies were eligible for a qualitative analysis, and six studies were eligible for a quantitative analysis. All studies included were cadaver studies. The qualitative analysis comprised 94 specimens and revealed considerable heterogeneity. Six studies allowed for a quantitative analysis of the tibiofibular clear space (TFCS) and five studies for the medial clear space (MCS) during the ERST. The quantitative analysis of the TFCS revealed no significant differences between intact and any stage of syndesmotic injury. The MCS was able to differentiate between intact and 2-ligament- (Z = 2.04, P = 0.02), 3-ligament- (Z = 3.2, P = 0.001), and 3-ligament + deltoid ruptures (Z = 3.35, P < 0.001). Conclusion: The ERST is the only noninvasive test to assess syndesmotic instability and can be conducted bilaterally. The uninjured contralateral side can serve as a baseline reference. Based on the conducted quantitative analysis, the MCS seems to be able to differentiate between stable (intact/1-ligament) and unstable (2-ligament/3-ligament) lesions.
RESUMO
OBJECTIVE: Hip osteoarthritis (OA) affects all components of the osteochondral unit, leading to bone marrow (BM) lesions, and unknown consequences on BM cell functionality. We analyzed the cellular composition in OA-affected acetabula compared to proximal femur shafts obtained of hip OA patients to reveal yet not explored immune and stem cell compartments. DESIGN: Combining flow cytometry, cellular assays and transcription analyses, we performed extensive ex vivo phenotyping of acetabular BM cells from 18 hip OA patients, comparing them with their counterparts from patient-matched femoral shaft BM samples. Findings were related to differences in skeletal sites and age. RESULTS: Acetabular BM had a greater frequency of T-lymphocytes, non-hematopoietic cells and colony-forming units fibroblastic potential than femoral BM. The incidence of acetabular CD45+CD3+ T-lymphocytes increased (95% CI: 0.1770 to 0.0.8416), while clonogenic hematopoietic progenitors declined (95% CI: -0.9023 to -0.2399) with age of patients. On the other side, in femoral BM, we observed higher B-lymphocyte, myeloid and erythroid cell frequencies. Acetabular mesenchymal stromal cells (MSCs) showed a senescent profile associated with the expression of survival and inflammation-related genes. Efficient osteogenic and chondrogenic differentiation was detected in acetabular MSCs, while adipogenesis was more pronounced in their femoral counterparts. CONCLUSION: Our results suggest that distinctions in BM cellular compartments and MSCs may be due to the influence of the OA-stressed microenvironment, but also acetabular vs femoral shaft-specific peculiarities cannot be excluded. These results bring new knowledge on acetabular BM cell populations and may be addressed as novel pathogenic mechanisms and therapeutic targets in OA.
Assuntos
Doenças das Cartilagens , Osteoartrite do Quadril , Acetábulo , Medula Óssea , Células da Medula Óssea , Doenças das Cartilagens/metabolismo , Diferenciação Celular , Humanos , Osteoartrite do Quadril/metabolismo , Células-TroncoRESUMO
OBJECTIVE: Conversion total hip arthroplasty (CTHA) through a direct anterior approach (DAA) in supine position. INDICATIONS: Failed osteosynthesis of proximal femoral fractures or failed conservative hip surgery, with hardware in situ. CONTRAINDICATIONS: Decayed general conditions, infection (peri-implant or systemic infection), need for greater trochanter reconstruction, severe proximal femur deformity. SURGICAL TECHNIQUE: Supine position. Mark DAA and expected limited incisions for hardware removal (HR) with the help of a C-arm. Use guidewire and extraction devices for HR. Perform a DAA with particular attention to a wide release of the femur. POSTOPERATIVE MANAGEMENT: Full progressive weight-bearing starting on day 1, depending on bone quality. Discharge with crutches following patient walking capability. Precautions for 6 weeks. RESULTS: In all, 27 conversion THAs through a DAA. Mean age at the time of surgery 59.8 (range 18-81) years. Mean body mass index was 23.5 (range 17-31.6). Reasons of previous surgery failures were avascular necrosis of the femoral head, posttraumatic arthritis and nonunion with or without hardware migration. Mean surgical time was 125.8â¯min (range 58-190â¯min, standard deviation [SD] 38.2â¯min). Mean follow-up time was 6.9 years (range 2-15, SD 5.03 years). Mean pre-Harris Hip Score (mHHs) was 24.4 (range 19-36, SD 5.4), while the mean post-mHHS was 90.3 (range 89-91, SD 0.95). Two patients required postoperative osteosynthesis for periprosthetic fractures due to falls. Overall complication rate was 10%.
Assuntos
Artroplastia de Quadril , Fraturas Periprotéticas , Adolescente , Adulto , Idoso , Idoso de 80 Anos ou mais , Cabeça do Fêmur/cirurgia , Humanos , Pessoa de Meia-Idade , Fraturas Periprotéticas/cirurgia , Estudos Retrospectivos , Resultado do Tratamento , Adulto JovemRESUMO
REBa2Cu3O7-δ (REBCO, RE: rare earth, such as Y and Gd) compounds have been extensively studied as a superconducting layer in coated conductors. Although ErBCO potentially has better superconducting properties than YBCO and GdBCO, little research has been made on it, especially in chemical solution deposition (CSD). In this work, ErBCO films were deposited on IBAD (ion-beam-assisted-deposition) substrates by CSD with low-fluorine solutions. The crystallization process was optimized to achieve the highest self-field critical current density (Jc) at 77 K. Commonly, for the investigation of a CSD process involving numerous process factors, one factor is changed keeping the others constant, requiring much time and cost. For more efficient investigation, this study adopted a novel design-of-experiment technique, definitive screening design (DSD), for the first time in CSD process. Two different types of solutions containing Er-propionate or Er-acetate were used to make two types of samples, Er-P and Er-A, respectively. Within the investigated range, we found that crystallization temperature, dew point, and oxygen partial pressure play a key role in Er-P, while the former two factors are significant for Er-A. DSD revealed these significant factors among six process factors with only 14 trials. Moreover, the DSD approach allowed us to create models that predict Jc accurately. These models revealed the optimum conditions giving the highest Jc values of 3.6 MA/cm2 for Er-P and 3.0 MA/cm2 for Er-A. These results indicate that DSD is an attractive approach to optimize CSD process.
RESUMO
A 46-year-old woman presented with recurrent right upper quadrant pain. Abdominal ultrasound revealed an inhomogeneous liver lesion (4â¯× 7â¯cm) with complex echotexture. Since further contrast-enhanced imaging tests were inconclusive and lesion integrity remained unclear, a left hemihepatectomy was performed. Histological examination revealed a hepatic epithelioid angiomyolipoma. Hepatic epithelioid angiomyolipoma is a rare, mostly benign, mesenchymal hepatic tumor, composed of smooth muscle cells, adipose tissue, and blood vessels of varying proportions, and its correct diagnosis remains a clinical challenge.
Assuntos
Dor Abdominal/etiologia , Angiomiolipoma , Neoplasias Hepáticas , Dor Abdominal/diagnóstico por imagem , Angiomiolipoma/diagnóstico , Angiomiolipoma/patologia , Angiomiolipoma/cirurgia , Biópsia , Feminino , Hepatectomia , Humanos , Fígado/patologia , Neoplasias Hepáticas/diagnóstico , Neoplasias Hepáticas/patologia , Neoplasias Hepáticas/cirurgia , Imageamento por Ressonância Magnética , Pessoa de Meia-IdadeRESUMO
Abdominal ultrasound is established as an important and low-risk diagnostic procedure in emergency and intensive care medicine that allows rapid and precise diagnosis in symptomatic patients and helps to evaluate which further diagnostic steps are needed. Abdominal ultrasound should be performed as the initial imaging modality in all symptomatic patients in an emergency or intensive care unit and can be used with great accuracy to detect the presence of various abdominal pathologies, such as abdominal aortic aneurysm, abscess, ureterolithiasis or free fluid. Furthermore ultrasound represents the imaging modality of choice for guiding many diagnostic and interventional percutaneous procedures in emergency and intensive care medicine and can be used e.â¯g. to drain pleural fluid or abdominal abscesses. Contrast-enhanced ultrasound (CEUS) can additionally be performed to provide a more reliable assessment of solid organ injuries and has the potential to detect parenchymal lesions or active bleeding from a variety of traumatic origins. Abdominal ultrasound is aimed to integrate rapidly detectable sonographic findings into the clinical context. To ensure required standards, regular training is necessary and it is important to understand methodological limitations.
Assuntos
Traumatismos Abdominais , Ultrassonografia/métodos , Traumatismos Abdominais/diagnóstico por imagem , Meios de Contraste , Cuidados Críticos , Emergências , HumanosRESUMO
A new state-of-the-art electrical transport measurement system was developed for the characterization of industrially produced coated conductors (CCs). The current leads are rated to a conduct current of up to 1000 A, which opens up the possibility of measuring the critical current Ic of tapes at a wide range of temperatures. The setup operates in a He-gas flow cryostat that provides stable temperatures between 1.8 and 200 K. The setup is equipped with a split-coil magnet that can apply fields of up to 6 T. A continuous rotation of the sample with respect to the magnetic field with an angular resolution of 0.5° enables characterization of anisotropic Ic of different tapes. In the measured voltage-current curves, weak sample heating mostly occurs from the dissipation in the tape during the Ic transition. It is demonstrated that the system can provide reliable data on the properties of CCs at temperatures lower than 77 K for a magnet design and other applications. The results allow the study of vortex pinning for further prospects of engineering the microstructure of the superconducting layer as well as to assess the performance of various tapes with different architectures to achieve optimum performance at different operating temperatures and magnetic fields.
RESUMO
Tissue engineering provides the possibility of regenerating damaged or lost osseous structures without the need for permanent implants. Within this context, biodegradable and bioresorbable scaffolds can provide structural and biomechanical stability until the body's own tissue can take over their function. Additive biomanufacturing makes it possible to design the scaffold's architectural characteristics to specifically guide tissue formation and regeneration. Its nano-, micro-, and macro-architectural properties can be tailored to ensure vascularization, oxygenation, nutrient supply, waste exchange, and eventually ossification not only in its periphery but also in its center, which is not in direct contact with osteogenic elements of the surrounding healthy tissue. In this article we provide an overview about our conceptual design and process of the clinical translation of scaffold-based bone tissue engineering applications.
Assuntos
Osso e Ossos/fisiologia , Engenharia Tecidual/métodos , Alicerces Teciduais/tendências , Implantes Absorvíveis , Fenômenos Biomecânicos/fisiologia , Regeneração Óssea/fisiologia , Transplante Ósseo/métodos , Previsões , Humanos , Osteogênese/fisiologia , Impressão TridimensionalAssuntos
Acetabuloplastia/tendências , Acetábulo/cirurgia , Artroplastia de Quadril/tendências , Osteoartrite do Quadril/cirurgia , Osteotomia/tendências , Reoperação/tendências , Terapia Combinada , Medicina Baseada em Evidências , Humanos , Procedimentos de Cirurgia Plástica/tendências , Resultado do TratamentoRESUMO
OBJECTIVE: Bicompartmental knee replacement in patients with combined osteoarthritis (OA) of the medial or lateral and patellofemoral compartment. Patient-specific instruments and implants (ConforMIS iDuo™) with a planning protocol for optimal implant fit. INDICATIONS: Bicompartmental OA of the knee (Kellgren & Lawrence stage IV) affecting both the medial or lateral and patellofemoral compartment after unsuccessful conservative or joint-preserving surgery. CONTRAINDICATIONS: Tricompartmental OA, knee ligament instabilities, knee deformities >15° (varus, valgus, extension deficit). Relative contraindication: body mass index >40; prior unicompartmental knee replacement or osteotomies. SURGICAL TECHNIQUE: Midline or parapatellar medial skin incision, medial arthrotomy; identify mechanical contact zone of the intact femoral condyle (linea terminalis); remove remaining cartilage and all osteophytes that may interfere with the correct placement of the individually designed instruments. Balance knee in extension with patient-specific balancing chips. Resection of proximal tibia with an individual cutting block; confirm axial alignment using an extramedullary alignment guide, balance flexion gap using spacer blocks in 90° flexion. Final femur preparation with resection of the anterior trochlea. After balancing and identification of insert heights, final tibial preparation is performed. Implant is cemented in 45° of knee flexion. Remove excess cement and final irrigation, followed by closure. POSTOPERATIVE MANAGEMENT: Sterile wound dressing; compressive bandage. No limitation of active/passive range of motion (ROM). Partial weight bearing the first 2 weeks, then transition to full weight bearing. Follow-up directly after surgery, at 12 and 52 weeks, then every 1-2 years. RESULTS: In all, 44 patients with bicompartmental OA of the medial and patellofemoral compartment were treated. Mean age 59 years. Minimum follow-up 12 months. Implant converted to TKA due to tibial loosening (1 patient); patella resurfacing (3 patients). No further revisions or complications. Radiographic analyses demonstrated ideal fit of the implant with less than 2 mm subsidence or overhang. KSS pain scores improved from preoperatively 5.7 to 1.7 postoperatively with level walking, and from 7.3 preoperatively to 2.8 postoperatively with climbing stairs or inclines. The WOMAC score improved from preoperatively 43 to 79 postoperatively.
Assuntos
Artroplastia do Joelho/instrumentação , Artroplastia do Joelho/métodos , Prótese do Joelho , Osteoartrite do Joelho/cirurgia , Articulação Patelofemoral/cirurgia , Ajuste de Prótese/métodos , Artroplastia do Joelho/reabilitação , Medicina Baseada em Evidências , Feminino , Humanos , Masculino , Pessoa de Meia-Idade , Osteoartrite do Joelho/diagnóstico , Articulação Patelofemoral/diagnóstico por imagem , Assistência Centrada no Paciente/métodos , Desenho de Prótese , Ajuste de Prótese/instrumentação , Resultado do TratamentoRESUMO
OBJECTIVE: Unicompartmental knee replacement in patients with osteoarthritis (OA) of the medial compartment. Individualized instruments and implants with a planning protocol for optimal fit. The individualized instruments and implants (ConforMIS Inc.; Burlington, MA, USA) are manufactured based on a computed tomography scan of the affected lower extremity and are provided together with a planning protocol (iView®) of the surgery. INDICATIONS: Unicompartmental OA of the knee (Kellgren & Lawrence stage IV) or Morbus Ahlbäck after unsuccessful conservative or joint preserving surgery. CONTRAINDICATIONS: Bi- or tricompartmental OA, knee ligament instabilities, knee deformities >15° (varus, valgus, extension deficit). Relative contraindication: body mass index >40. SURGICAL TECHNIQUE: Limited medial arthrotomy, identification of mechanical contact zone of the femoral condyle (linea terminalis); removal of remaining cartilage and all osteophytes that may interfere with the correct placement of the individually designed instruments. Balancing of knee in extension using patient-specific balancing chips of incremental heights. Resection of tibia with a fitted individualized tibial cutting block; confirmation of axial alignment with an extramedullary alignment tower; balancing flexion gap using spacer blocks in 90° flexion. Final femur preparation with the individual cutting instruments. Final tibial preparation with an individual drill jig for the placement of cavities fitting the cement pegs of the prosthesis. Lavage, cementing of implants in 45° of knee flexion, removal of excess cement, and wound closure. POSTOPERATIVE MANAGEMENT: Sterile wound dressing, compressive bandage. Unlimited active/passive range of motion. Functional rehabilitation with partial weight bearing first 2 weeks, then transition to full weight bearing. Clinical/radiographic follow-up directly after surgery, at 12 and 52 weeks, then every 1-2 years. RESULTS: In all, 31 patients with medial OA (27 medial knee osteoarthritis, 4 osteonecrosis) were treated. Mean age 60 years. Minimum follow-up 17 months. One aseptic loosening needed exchange; one acute late-onset infection with consecutive implant removal. No further revisions/reoperations or complications. X-rays showed an ideal fit of the implant with less than 2 mm subsidence or overhang in all cases. Clinically the VAS changed from 6.51 preoperatively to 1.11 postoperatively. The mean KSS (Knee Society Score) improved from 111.23 preoperatively to 180.61 postoperatively; the functional part of KSS improved from mean 60.39 to 94.51.
Assuntos
Artroplastia do Joelho/instrumentação , Artroplastia do Joelho/reabilitação , Prótese do Joelho , Osteoartrite do Joelho/cirurgia , Osteoartrite/cirurgia , Osteonecrose/cirurgia , Artroplastia do Joelho/métodos , Medicina Baseada em Evidências , Feminino , Humanos , Articulação do Joelho/diagnóstico por imagem , Articulação do Joelho/cirurgia , Pessoa de Meia-Idade , Osteoartrite/diagnóstico por imagem , Osteoartrite do Joelho/diagnóstico , Osteonecrose/diagnóstico por imagem , Assistência Centrada no Paciente/métodos , Desenho de Prótese , Ajuste de Prótese/métodos , Resultado do TratamentoRESUMO
The periosteum plays a critical role in bone homeostasis and regeneration. It contains a vascular component that provides vital blood supply to the cortical bone and an osteogenic niche that acts as a source of bone-forming cells. Periosteal grafts have shown promise in the regeneration of critical size defects, however their limited availability restricts their widespread clinical application. Only a small number of tissue-engineered periosteum constructs (TEPCs) have been reported in the literature. A current challenge in the development of appropriate TEPCs is a lack of pre-clinical models in which they can reliably be evaluated. In this study, we present a novel periosteum tissue engineering concept utilizing a multiphasic scaffold design in combination with different human cell types for periosteal regeneration in an orthotopic in vivo platform. Human endothelial and bone marrow mesenchymal stem cells (BM-MSCs) were used to mirror both the vascular and osteogenic niche respectively. Immunohistochemistry showed that the BM-MSCs maintained their undifferentiated phenotype. The human endothelial cells developed into mature vessels and connected to host vasculature. The addition of an in vitro engineered endothelial network increased vascularization in comparison to cell-free constructs. Altogether, the results showed that the human TEPC (hTEPC) successfully recapitulated the osteogenic and vascular niche of native periosteum, and that the presented orthotopic xenograft model provides a suitable in vivo environment for evaluating scaffold-based tissue engineering concepts exploiting human cells.
Assuntos
Órgãos Bioartificiais , Células-Tronco Mesenquimais/citologia , Células-Tronco Mesenquimais/fisiologia , Periósteo/citologia , Periósteo/crescimento & desenvolvimento , Engenharia Tecidual/instrumentação , Alicerces Teciduais , Diferenciação Celular , Proliferação de Células , Células Cultivadas , Humanos , Técnicas de Cultura de Órgãos/instrumentação , Técnicas de Cultura de Órgãos/métodos , Engenharia Tecidual/métodosRESUMO
Parallel to the rising number of revision hip procedures, an increasing number of complex periprosthetic osseous defects can be expected. Stable long-term fixation of the revision implant remains the ultimate goal of the surgical protocol. Within this context, an elaborate preoperative planning process including anticipation of the periacetabular defect form and size and analysis of the remaining supporting osseous elements are essential. However, detection and evaluation of periacetabular bone defects using an unsystematic analysis of plain anteroposterior radiographs of the pelvis is in many cases difficult. Therefore, periacetabular bone defect classification schemes such as the Paprosky system have been introduced that use standardized radiographic criteria to better anticipate the intraoperative reality. Recent studies were able to demonstrate that larger defects are often underestimated when using the Paprosky classification and that the intra- and interobserver reliability of the system is low. This makes it hard to compare results in terms of defects being studied. Novel software tools that are based on the analysis of CT data may provide an opportunity to overcome the limitations of native radiographic defect analysis. In the following article we discuss potential benefits of these novel instruments against the background of the obvious limitations of the currently used native radiographic defect analysis.
Assuntos
Acetabuloplastia/métodos , Imageamento Tridimensional/métodos , Osteólise/diagnóstico por imagem , Osteólise/cirurgia , Cirurgia Assistida por Computador/métodos , Tomografia Computadorizada por Raios X/métodos , Algoritmos , Medicina Baseada em Evidências , Humanos , Cuidados Pré-Operatórios/métodos , Intensificação de Imagem Radiográfica/métodos , Reprodutibilidade dos Testes , Sensibilidade e EspecificidadeRESUMO
BACKGROUND: Many different systems for the management of primary and secondary acetabular defects are available, each with its inherent advantages and disadvantages. The Revisio-System is a press-fit oval mono-block implant that makes a defect-oriented reconstruction and restoration of the center of rotation possible. MATERIAL AND METHODS: In this study, we retrospectively reviewed the outcome of 92 consecutive patients treated with this oval press-fit cup due to periacetabular bone loss. The average follow-up was 58.2 months. Defects were classified according to D'Antonio. There were 39 type II, 38 Type III, and 15 type IV defects. After an average of 4.9 years, the implant survival rate was 94.6% with cup revision as the end point and 89.1% with revision for any reason as the end point. The Harris Hip Score increased from 41.1 preoperatively to 62.3 postoperatively. The mean level of pain measured with the Visual Analogue Scale (VSA) was reduced from 6.9 preoperatively to 3.8 postoperatively. RESULTS: The Revisio-System represents a promising toolbox for defect-orientated reconstruction of acetabular bone loss in revision hip arthroplasty. Our results demonstrate that the implantation of the Revisio-System can result in a good mid-term clinical outcome.
Assuntos
Acetabuloplastia/instrumentação , Acetábulo/cirurgia , Artroplastia de Quadril/efeitos adversos , Artroplastia de Quadril/instrumentação , Osteólise/etiologia , Osteólise/cirurgia , Reoperação/instrumentação , Acetábulo/diagnóstico por imagem , Adulto , Idoso , Idoso de 80 Anos ou mais , Terapia Combinada , Análise de Falha de Equipamento , Medicina Baseada em Evidências , Feminino , Humanos , Estudos Longitudinais , Masculino , Pessoa de Meia-Idade , Osteotomia/instrumentação , Osteotomia/métodos , Desenho de Prótese , Procedimentos de Cirurgia Plástica/instrumentação , Reoperação/métodos , Estudos Retrospectivos , Resultado do TratamentoRESUMO
Fe-based superconductors (FBS) present a large variety of compounds whose properties are affected to different extents by their crystal structures. Amongst them, the REFeAs(O,F) (RE1111, RE being a rare-earth element) is the family with the highest critical temperature Tc but also with a large anisotropy and Josephson vortices as demonstrated in the flux-flow regime in Sm1111 (Tc â¼ 55 K). Here we focus on the pinning properties of the lower-Tc Nd1111 in the flux-creep regime. We demonstrate that for H//c critical current density Jc at high temperatures is dominated by point-defect pinning centres, whereas at low temperatures surface pinning by planar defects parallel to the c-axis and vortex shearing prevail. When the field approaches the ab-planes, two different regimes are observed at low temperatures as a consequence of the transition between 3D Abrikosov and 2D Josephson vortices: one is determined by the formation of a vortex-staircase structure and one by lock-in of vortices parallel to the layers. This is the first study on FBS showing this behaviour in the full temperature, field, and angular range and demonstrating that, despite the lower Tc and anisotropy of Nd1111 with respect to Sm1111, this compound is substantially affected by intrinsic pinning generating a strong ab-peak in Jc.
RESUMO
The aim of this study was to analyse the gait pattern, muscle force and functional outcome of patients who had undergone replacement of the proximal tibia for tumour and alloplastic reconstruction of the extensor mechanism using the patellar-loop technique. Between February 1998 and December 2009, we carried out wide local excision of a primary sarcoma of the proximal tibia, proximal tibial replacement and reconstruction of the extensor mechanism using the patellar-loop technique in 18 patients. Of these, nine were available for evaluation after a mean of 11.6 years (0.5 to 21.6). The strength of the knee extensors was measured using an Isobex machine and gait analysis was undertaken in our gait assessment laboratory. Functional outcome was assessed using the American Knee Society (AKS) and Musculoskeletal Tumor Society (MSTS) scores. The gait pattern of the patients differed in ground contact time, flexion heel strike, maximal flexion loading response and total sagittal plane excursion. The mean maximum active flexion was 91° (30° to 110°). The overall mean extensor lag was 1° (0° to 5°). The mean extensor muscle strength was 25.8% (8.3% to 90.3%) of that in the non-operated leg (p < 0.001). The mean functional scores were 68.7% (43.4% to 83.3%) (MSTS) and 71.1 (30 to 90) (AKS functional score). In summary, the results show that reconstruction of the extensor mechanism using this technique gives good biomechanical and functional results. The patients' gait pattern is close to normal, except for a somewhat stiff knee gait pattern. The strength of the extensor mechanism is reduced, but sufficient for walking.
Assuntos
Neoplasias Ósseas/cirurgia , Marcha/fisiologia , Articulação do Joelho/cirurgia , Músculo Esquelético/fisiopatologia , Ligamento Patelar/cirurgia , Procedimentos de Cirurgia Plástica/métodos , Sarcoma/cirurgia , Tíbia/cirurgia , Adolescente , Adulto , Idoso , Neoplasias Ósseas/fisiopatologia , Criança , Feminino , Seguimentos , Humanos , Articulação do Joelho/fisiopatologia , Masculino , Pessoa de Meia-Idade , Força Muscular/fisiologia , Ligamento Patelar/fisiopatologia , Amplitude de Movimento Articular/fisiologia , Estudos Retrospectivos , Sarcoma/fisiopatologia , Tíbia/fisiopatologia , Resultado do TratamentoRESUMO
OBJECTIVE: Regeneration of autologous bone stock and formation of a stable implant bed by impaction of morselized bone allograft. INDICATIONS: Bone loss after septic and aseptic loosening or tumour resection. CONTRAINDICATIONS: Persistent infection, one-stage septic revision, poor therapeutic compliance, extensive uncontained metaphyseal defects with cortical thinning of the diaphysis. SURGICAL TECHNIQUE: Whilst the surgeon removes the loose prosthesis, the assistant prepares the graft. The medullary canal is sealed with a cement restrictor. Graft particles of different sizes are densely impacted around a trial stem. The highest level of stability is achieved by using large particles interspersed with small filler particles. Low-viscosity cement facilitates cement penetration and ensures strong interdigitation with the impacted graft mass after implantation of the prosthesis. Uncontained metaphyseal defects are treated with prosthetic augments. POSTOPERATIVE MANAGEMENT: Gait training, physiotherapy with isometric quadriceps exercises, partial weight-bearing for 6 weeks, resistance training begins 8 weeks postoperatively. RESULTS: Between 2010 and 2012, 28 patients with large bone defects [Anderson Orthopaedic Research Institute (AORI) grade: 21 × F3, 3 × F2, 13 × T3, 8 × T2] underwent total knee revision with impaction bone grafting. The mean follow-up was 27.7 months (range 21-47 months). On average, patients had undergone 2.5 previous revisions. Implant survival was 82.0 % (95 % CI = 62.5 %-92.1 %) for any reason of revision as the endpoint and 93.1 % (95 % CI = 74.5-98.4 %) for aseptic revision as the endpoint. The mean postoperative Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC) score was 35.4 (range 3.3-101.6, SD ± 26.2). The mean KSS was 70.6 (range 20-100, SD ± 26.8).