RESUMO
3,6-Bis(N,N-dianisylamino)-fluoren-9-ylidene malononitrile (FMBDAA36) was used as an electron donor material in solution-processed organic photovoltaic devices with configuration ITO/PEDOT:PSS/(1:3[w/w] FMBDAA36:PC71BM)/LiF/Al to give power conversion efficiencies up to 4.1% with open circuit voltage VOC = 0.89 V, short circuit current JSC = 10.35 mA cm(-2), and fill factor FF = 44.8%. Conductive atomic force microscopy of the active layer showed granular separation of regions exhibiting easy versus difficult hole transport, consistent with bulk heterojunction type phase separation of FMBDAA36 and PC71BM, respectively. Single-crystal X-ray diffraction analysis showed pure FMBDAA36 to form columnar π-stacks with a 3.3 Å intermolecular spacing.
RESUMO
2,4-Bis[4'-(N,N-di(4â³-hydroxyphenyl)amino)-2',6'-dihydroxyphenyl]squaraine (Sq-TAA-OH, optical bandgap 1.4 eV, HOMO level -5.3 eV by ultraviolet photoelectron spectroscopy) is used as an active layer material in solution processed, bulk-heterojunction organic photovoltaic cells with configuration ITO/PEDOT:PSS/Sq-TAA-OH:PC71BM/LiF/Al. Power conversion efficiencies (PCEs) up to 4.8% are obtained by a well-reproducible procedure using a mixture of good and poor Sq-TAA-OH solubilizing organic solvents, with diiodooctane (DIO) additive to make a bulk heterojunction layer, followed by thermal annealing, to give optimized V(OC) = 0.84-0.86 V, J(SC) = 10 mA cm(-2), and FF = 0.53. X-ray diffraction and scattering studies of pristine, pure Sq-TAA-OH solution-cast films show d-spacing features similar to single-crystal packing and spacing. The DIO additive in a good solvent/poor solvent mixture apparently broadens the size distribution of Sq-TAA-OH crystallites in pristine films, but thermal annealing provides a narrower size distribution. Direct X-ray diffraction and scattering morphological studies of "as-fabricated" active layers show improved Sq-TAA-OH/PC71BM phase separation and formation of crystallites, â¼48 nm in size, under conditions that give the best PCE.
RESUMO
Polymer solar cells fabricated in air under ambient conditions are of significant current interest, because of the implications in practicality of such devices. However, only moderate performance has been obtained for the air-processed devices. Here, we report that enhanced short circuit current density (JSC) and open circuit voltage (VOC) in air-processed poly(3-hexylthiophene) (P3HT)-based solar cells can be obtained by using a series of donor-acceptor dyes as the third component in the device. Power conversion efficiencies up to 4.6% were obtained upon addition of the dyes which are comparable to high-performance P3HT solar cells fabricated in controlled environments. Multilayer planar solar cells containing interlayers of the donor-acceptor dyes, revealed that along with infrared sensitization, an energy level cascade architecture and Förster resonance energy transfer could contribute to the enhanced performance.
RESUMO
Donor-acceptor molecules incorporating fluoren-9-ylidene malononitrile acceptor units conjugated to trimethoxystyrene and/or diarylamine donor units were synthesized, and their electronic spectral properties and electrochemical behaviors were evaluated by comparison to those of the analogous fluorenones. Frontier energy level and optical transition energy trends are explained based on a quantitative, modular donor-acceptor interaction model. A connectivity effect on absorption transition moment strength is also described.
RESUMO
Push-pull organic molecules composed of electron donor diarylamines at the 2- and 2,7-positions of fluorenone exhibit intramolecular charge-transfer behaviour in static absorption and emission spectra. Electrochemical and spectral data combined in a modular electronic analysis model show how the donor HOMO and acceptor LUMO act as major determinants of the frontier molecular orbital energy levels.
