Rapid Laser Reactive Sintering for Sustainable and Clean Preparation of Protonic Ceramics.

One of the essential challenges for energy conversion and storage devices based on protonic ceramics is that the high temperature (1600-1700 °C) and long-time firing (>10 h) are inevitably required for the fabrication, which makes the sustainable and clean manufacturing of protonic ceramic devices impractical. This study provided a new rapid laser reactive sintering (RLRS) method for the preparation of nine protonic ceramics [i.e., BaZr0.8Y0.2O3-δ (BZY20), BZY20 + 1 wt % NiO, BaCe0.7Zr0.1Y0.1Yb0.1O3-δ (BCZYYb), BCZYYb + 1 wt % NiO, 40 wt % BCZYYb + 60 wt % NiO, BaCe0.85Fe0.15O3-δ-BaCe0.15Fe0.85O3-δ (BCF), BaCo0.4Fe0.4Zr0.1Y0.1O3-δ (BCFZY0.1), BaCe0.6Zr0.3Y0.1O3-δ (BCZY63), and La0.7Sr0.3CrO3-δ (LSC)] with desired crystal structures and microstructures. Following this, the dual-layer half-cells, comprising the porous electrode and dense electrolyte, were prepared by the developed RLRS technique. After applying the BCFZY0.1 cathode, the protonic ceramic fuel cell (PCFC) single cells were prepared and tested initially. The derived conductivity of the RLRS electrolyte films showed comparable proton conductivity with the electrolyte prepared by conventional furnace sintering. The initial cost estimation based on electricity consumption during the sintering process for the fabrication of PCFC single cells showed that RLRS is more competitive than the conventional furnace sintering. This RLRS can be combined with the rapid additive manufacturing of ceramics for the sustainable and clean manufacturing of protonic ceramic energy devices and the processing of other ceramic devices.

The effect of laser sintering on the microstructure, relative density, and cracking of sol-gel-derived silica thin films.

Combining sol-gel processing and laser sintering is a promising way for fabricating functional ceramic deposition with high dimensional resolution. In this work, crack-free silica tracks on a silica substrate with a thickness from ~360 nm to ~950 nm, have been obtained by direct exposure to a CO2 laser beam. At a fixed scanning speed, the density and microstructures of the silica deposition can be precisely controlled by varying the laser output power. The porosity of the laser-sintered silica tracks ranged from close to 0% to ~60%. When the thickness of the silica deposition exceeded the critical thickness (eg, ~2.2 µm before firing), cracks occurred in both laser-sintered and furnace-sintered samples. Cracks propagated along the edge of the laser-sintered track, resulting in the crack-free track. However, for the furnace heat-treated counterpart, the cracks spread randomly. To understand the laser sintering effect, we established a finite element model (FEM) to calculate the temperature profile of the substrate during laser scanning, which agreed well with the one-dimensional analytical model. The FEM model confirmed that laser sintering was the main thermal effect and the calculated temperature profile can be used to predict the microstructure of the laser-sintered tracks. Combining these results, we were able to fabricate, predesigned patterned (Clemson tiger paw) silica films with high density using a galvo scanner.

A Novel Laser 3D Printing Method for the Advanced Manufacturing of Protonic Ceramics.

Protonic ceramics (PCs) with high proton conductivity at intermediate temperatures (300-600 °C) have attracted many applications in energy conversion and storage devices such as PC fuel/electrolysis cells, PC membrane reactors, hydrogen pump, hydrogen or water-permeable membranes, and gas sensors. One of the essential steps for fulfilling the practical utilization of these intermediate-temperature PC energy devices is the successful development of advanced manufacturing methods for cost-effectively and rapidly fabricating them with high energy density and efficiency in a customized demand. In this work, we developed a new laser 3D printing (L3DP) technique by integrating digital microextrusion-based 3D printing and precise and rapid laser processing (sintering, drying, cutting, and polishing), which showed the capability of manufacturing PCs with desired complex geometries, crystal structures, and microstructures. The L3DP method allowed the fabrication of PC parts such as pellets, cylinders, cones, films, straight/lobed tubes with sealed endings, microchannel membranes, and half cells for assembling PC energy devices. The preliminary measurement of the L3DP electrolyte film showed a high proton conductivity of ≈7 × 10-3 S/cm. This L3DP technique not only demonstrated the potential to bring the PCs into practical use but also made it possible for the rapid direct digital manufacturing of ceramic-based devices.