Alumination of aryl methyl ethers: switching between sp2 and sp3 C-O bond functionalisation with Pd-catalysis.

The reaction of [{(ArNCMe)2CH}Al] (Ar = 2,6-di-iso-propylphenyl) with aryl methyl ethers proceeded with alumination of the sp3 C-O bond. The selectivity of this reaction could be switched by inclusion of a catalyst. In the presence of [Pd(PCy3)2], chemoselective sp2 C-O bond functionalisation was observed. Kinetic isotope experiments and DFT calculations support a catalytic pathway involving the ligand-assisted oxidative addition of the sp2 C-O bond to a Pd-Al intermetallic complex.

Catalyst control of selectivity in the C-O bond alumination of biomass derived furans.

Non-catalysed and catalysed reactions of aluminium reagents with furans, dihydrofurans and dihydropyrans were investigated and lead to ring-expanded products due to the insertion of the aluminium reagent into a C-O bond of the heterocycle. Specifically, the reaction of [{(ArNCMe)2CH}Al] (Ar = 2,6-di-iso-propylphenyl, 1) with furans proceeded between 25 and 80 °C leading to dearomatised products due to the net transformation of a sp2 C-O bond into a sp2 C-Al bond. The kinetics of the reaction of 1 with furan were found to be 1st order with respect to 1 with activation parameters ΔH ‡ = +19.7 (±2.7) kcal mol-1, ΔS ‡ = -18.8 (±7.8) cal K-1 mol-1 and ΔG ‡ 298 K = +25.3 (±0.5) kcal mol-1 and a KIE of 1.0 ± 0.1. DFT calculations support a stepwise mechanism involving an initial (4 + 1) cycloaddition of 1 with furan to form a bicyclic intermediate that rearranges by an α-migration. The selectivity of ring-expansion is influenced by factors that weaken the sp2 C-O bond through population of the σ*-orbital. Inclusion of [Pd(PCy3)2] as a catalyst in these reactions results in expansion of the substrate scope to include 2,3-dihydrofurans and 3,4-dihydropyrans and improves selectivity. Under catalysed conditions, the C-O bond that breaks is that adjacent to the sp2C-H bond. The aluminium(iii) dihydride reagent [{(MesNCMe)2CH}AlH2] (Mes = 2,4,6-trimethylphenyl, 2) can also be used under catalytic conditions to effect a dehydrogenative ring-expansion of furans. Further mechanistic analysis shows that C-O bond functionalisation occurs via an initial C-H bond alumination. Kinetic products can be isolated that are derived from installation of the aluminium reagent at the 2-position of the heterocycle. C-H alumination occurs with a KIE of 4.8 ± 0.3 consistent with a turnover limiting step involving oxidative addition of the C-H bond to the palladium catalyst. Isomerisation of the kinetic C-H aluminated product to the thermodynamic C-O ring expansion product is an intramolecular process that is again catalysed by [Pd(PCy3)2]. DFT calculations suggest that the key C-O bond breaking step involves attack of an aluminium based metalloligand on the 2-palladated heterocycle. The new methodology has been applied to important platform chemicals from biomass.

The partial dehydrogenation of aluminium dihydrides.

The reactions of a series of ß-diketiminate stabilised aluminium dihydrides with ruthenium bis(phosphine), palladium bis(phosphine) and palladium cyclopentadienyl complexes is reported. In the case of ruthenium, alane coordination occurs with no evidence for hydrogen loss resulting in the formation of ruthenium complexes with a pseudo-octahedral geometry and cis-relation of phosphine ligands. These new ruthenium complexes have been characterised by multinuclear and variable temperature NMR spectroscopy, IR spectroscopy and single crystal X-ray diffraction. In the case of palladium, a series of structural snapshots of alane dehydrogenation have been isolated and crystallographically characterised. Variation of the palladium precursor and ligand on aluminium allows kinetic control over reactivity and isolation of intermetallic complexes that contain new Pd-Al and Pd-Pd interactions. These complexes differ by the ratio of H : Al (2 : 1, 1.5 : 1 and 1 : 1) with lower hydride content species forming with dihydrogen loss. A combination of X-ray and neutron diffraction studies have been used to interrogate the structures and provide confidence in the assignment of the number and position of hydride ligands. 27Al MAS NMR spectroscopy and calculations (DFT, QTAIM) have been used to gain an understanding of the dehydrogenation processes. The latter provide evidence for dehydrogenation being accompanied by metal-metal bond formation and an increased negative charge on Al due to the covalency of the new metal-metal bonds. To the best of our knowledge, we present the first structural information for intermediate species in alane dehydrogenation including a rare neutron diffraction study of a palladium-aluminium hydride complex. Furthermore, as part of these studies we have obtained the first SS 27Al NMR data on an aluminium(i) complex. Our findings are relevant to hydrogen storage, materials chemistry and catalysis.

Dihydridoboranes: Selective Reagents for Hydroboration and Hydrodefluorination.

The preparation of a new series of dihydridoboranes supported by N,N-chelating ligands, [R2NCH2CH2NAr]- (R = alkyl, Ar = aryl), is reported. These new boranes react selectively with carbonyls, imines, and a series of electron-deficient fluoroarenes. The reactivity is complementary to recognized reagents such as pinacolborane, catecholborane, NHC-BH3, and borane (BH3) itself. Selectivities are rationalized by invoking both open- and closed-chain forms of the reagents as part of equilibrium mixtures.

Room temperature catalytic carbon-hydrogen bond alumination of unactivated arenes: mechanism and selectivity.

We report the first catalytic methods for the transformation of C-H bonds of unactivated arenes into C-Al bonds. The catalytic reactions occur at 25 °C (benzene, toluene and xylenes) with palladium loadings as low as 0.1 mol%. Remarkably, the C-H activation of toluene and xylenes proceeds with ortho- and meta-selectivity. This selectivity is highly unusual and complementary to both Friedel-Crafts and the majority of C-H borylation methods. Through a detailed mechanistic analysis (Eyring analysis, KIE, DFT, QTAIM) we show that unusual Pd-Al intermetallic complexes are on the catalytic cycle and that the selectivity is determined by weak attractive dispersion forces in the transition state for C-H bond breaking.

Palladium-Catalyzed Carbon-Fluorine and Carbon-Hydrogen Bond Alumination of Fluoroarenes and Heteroarenes.

Through serendipitous discovery, a palladium bis(phosphine) complex was identified as a catalyst for the selective transformation of sp2 C-F and sp2 C-H bonds of fluoroarenes and heteroarenes to sp2 C-Al bonds (19 examples, 1 mol % Pd loading). The carbon-fluorine bond functionalization reaction is highly selective for the formation of organoaluminium products in preference to hydrodefluorination products (selectivity=4.4:1 to 27:1). Evidence is presented for a tandem catalytic process in which hydrodefluorination is followed by sp2 C-H alumination.

Coming full circle: constructing a [Gd6] wheel dimer by dimer and the importance of spin topology.

The syntheses, structures, magnetic and thermodynamic properties of three related triethanolamine-based GdIII complexes are described. The smallest, a dimer ([Gd2]), can be viewed as the subunit from which the two larger complexes, a linear tetramer ([Gd2]2) and a cyclic hexamer ([Gd2]3), are composed by further deprotonation of the triethanolamine ligand. In all cases, nearest neighbour magnetic ions are weakly correlated by antiferromagnetic isotropic exchange, whose strength does not change significantly from one complex to another; J ranging from -0.10 to -0.13 cm-1. Therefore, rather than the strength of the coupling, it is the spin topology that is the dominant factor in determining the differences between the physical properties - specifically, the nuclearity and the transition from open (dimer and tetramer) to cyclic (hexamer) boundary conditions. Indeed the hexanuclear wheel reaches the continuum limit of classical Heisenberg spin chains. In terms of the magnetocaloric properties, the smaller the nuclearity, the larger the magnetic entropy and adiabatic temperature changes.

Structurally Flexible and Solution Stable [Ln4TM8(OH)8(L)8(O2CR)8(MeOH)y](ClO4)4: A Playground for Magnetic Refrigeration.

The family of compounds of general formula [LnIII4TMII8(OH)8(L)8(O2CR)8(MeOH)y](ClO4)4 {[Gd4Zn8(OH)8(hmp)8(O2CiPr)8](ClO4)4 (1a); [Y4Zn8(OH)8(hmp)8(O2CiPr)8](ClO4)4 (1b); [Gd4Cu8(OH)8(hmp)8(O2CiPr)8](ClO4)4 (2a); [Y4Cu8(OH)8(hmp)8(O2CiPr)8](ClO4)4 (2b); [Gd4Cu8(OH)8(hep)8(O2CiPr)8](ClO4)4 (3a); [Gd4Cu8(OH)8(Hpdm)8(O2CtBu)8](ClO4)4 (4a); [Gd4Cu8(OH)8(ea)8(O2CMe)8](ClO4)4 (5a); [Gd4Ni8(OH)8(hmp)8(O2CEt)8(MeOH)6](ClO4)4 (6a); [Y4Ni8(OH)8(hmp)8(O2CEt)8(MeOH)6](ClO4)4 (6b); [Gd4Co8(OH)8(hmp)8(O2CEt)8(MeOH)6](ClO4)4 (7a); [Y4Co8(OH)8(hmp)8(O2CEt)8(MeOH)6](ClO4)4 (7b)} can be formed very simply and in high yields from the reaction of Ln(NO3)3·6H2O and TM(ClO4)2·6H2O and the appropriate ligand blend in a mixture of CH2Cl2 and MeOH in the presence of a suitable base. Remarkably, almost all the constituent parts, namely the lanthanide (or rare earth) ions LnIII (here Ln = Gd or Y), the transition metal ions TMII (here TM = Zn, Cu, Ni, Co), the bridging ligand L (Hhmp = 2-(hydroxymethyl)pyridine; Hhep = 2-(hydroxyethyl)pyridine; H2pdm = pyridine-2,6-dimethanol; Hea = 2-ethanolamine), and the carboxylates can be exchanged while maintaining the structural integrity of the molecule. NMR spectroscopy of diamagnetic complex 1b reveals the complex to be fully intact in solution with all signals from the hydroxide, ligand L, and the carboxylates equivalent on the NMR time scale, suggesting the complex possesses greater symmetry in solution than in the solid state. High resolution nano-ESI mass spectrometry on dichloromethane solutions of 2a and 2b shows both complexes are present in two charge states with little fragmentation; with the most intense peak in each spectrum corresponding to [Ln4Cu8(OH)8(hmp)8(O2CiPr)8](ClO4)22+. This family of compounds offers an excellent playground for probing how the magnetocaloric effect evolves by introducing either antiferromagnetic or ferromagnetic interactions, or magnetic anisotropy, by substituting the nonmagnetic ZnII (1a) with CuII (2a), NiII (6a) or CoII (7a), respectively. The largest magnetocaloric effect is found for the ferromagnetically coupled complex 6a, while the predominant antiferromagnetic interactions in 2a yield an inverse magnetocaloric effect; that is, the temperature increases on lowering the applied field, under the proper experimental conditions. In spite of increasing the magnetic density by adding ions that bring in antiferromagnetic interactions (2a) or magnetic anisotropy (7a), the magnetocaloric effect is overall smaller in 2a and 7a than in 1a, where only four GdIII spins per molecule contribute to the magnetocaloric properties.

Variable coordination modes and catalytic dehydrogenation of B-phenyl amine-boranes.

The chemistry of N-substituted amine-boranes and their reactivity towards transition metal centres is well established but the chemistry of B-substituted amine-boranes is not. Here we present the coordination chemistry of H2PhB·NMe3 towards a range of Rh(i) fragments with different P-Rh-P ligand bite angles, {Rh(P(i)Pr3)2}(+), {Rh(P(i)Bu3)2}(+), {Rh((i)Pr2P(CH2)3P(i)Pr2)}(+), {Rh(Ph2P(CH2)nPPh2)}(+) (n = 3, 5), as characterised by NMR spectroscopy and single-crystal X-ray diffraction. This reveals a difference in the coordination mode of the amine-borane, with large bite angle fragments favouring η(2)-coordination through a sigma-interaction with BH2, whereas fragments with small bite angles favour η(6)-coordination through the aryl group of the amine-borane. The catalytic dehydrocoupling of H2PhB·NMe2H is also explored, with the aminoborane HPhB[double bond, length as m-dash]NMe2 found to be the sole dehydrogenation product. Stoichiometric reactivity with H2PhB·NMe2H again showed small bite angle fragments to prefer η(6)-aryl coordination, while the larger bite angle {Rh(P(i)Pr3)2}(+) gave rapid dehydrogenation to form a mixture of the Rh(iii) dihydride [Rh(P(i)Pr3)2(H)2(η(2)-H2PhB·NMe2H)][BAr(F)4] and the low coordinate aminoboryl complex [Rh(P(i)Pr3)2(H)(BPhNMe2)][BAr(F)4]. These results suggest that precatalysts which η(6)-bind arenes strongly should be avoided for the dehydrocoupling of amine-boranes bearing aryl substituents.

The Synthesis, Characterization and Dehydrogenation of Sigma-Complexes of BN-Cyclohexanes.

The coordination chemistry of the 1,2-BN-cyclohexanes 2,2-R2 -1,2-B,N-C4 H10 (R2 =HH, MeH, Me2 ) with Ir and Rh metal fragments has been studied. This led to the solution (NMR spectroscopy) and solid-state (X-ray diffraction) characterization of [Ir(PCy3 )2 (H)2 (η(2) η(2) -H2 BNR2 C4 H8 )][BAr(F) 4 ] (NR2 =NH2 , NMeH) and [Rh(iPr2 PCH2 CH2 CH2 PiPr2 )(η(2) η(2) -H2 BNR2 C4 H8 )][BAr(F) 4 ] (NR2 =NH2 , NMeH, NMe2 ). For NR2 =NH2 subsequent metal-promoted, dehydrocoupling shows the eventual formation of the cyclic tricyclic borazine [BNC4 H8 ]3 , via amino-borane and, tentatively characterized using DFT/GIAO chemical shift calculations, cycloborazane intermediates. For NR2 =NMeH the final product is the cyclic amino-borane HBNMeC4 H8 . The mechanism of dehydrogenation of 2,2-H,Me-1,2-B,N-C4 H10 using the {Rh(iPr2 PCH2 CH2 CH2 PiPr2 )}(+) catalyst has been probed. Catalytic experiments indicate the rapid formation of a dimeric species, [Rh2 (iPr2 PCH2 CH2 CH2 PiPr2 )2 H5 ][BAr(F) 4 ]. Using the initial rate method starting from this dimer, a first-order relationship to [amine-borane], but half-order to [Rh] is established, which is suggested to be due to a rapid dimer-monomer equilibrium operating.

Dehydrocoupling of phosphine-boranes using the [RhCp*Me(PMe3)(CH2Cl2)][BArF4] precatalyst: stoichiometric and catalytic studies.

We report a detailed, combined experimental and computational study on the fundamental B-H and P-H bond activation steps involved in the dehydrocoupling/dehydropolymerization of primary and secondary phosphine-boranes, H3B·PPhR'H (R = Ph, H), using [RhCp*(PMe3)Me(ClCH2Cl)][BArF4], to either form polyphosphino-boranes [H2B·PPhH] n (Mn ∼ 15 000 g mol-1, PDI = 2.2) or the linear diboraphosphine H3B·PPh2BH2·PPh2H. A likely polymer-growth pathway of reversible chain transfer step-growth is suggested for H3B·PPhH2. Using secondary phosphine-boranes as model substrates a combined synthesis, structural (X-ray crystallography), labelling and computational approach reveals: initial bond activation pathways (B-H activation precedes P-H activation); key intermediates (phosphido-boranes, α-B-agostic base-stabilized boryls); and a catalytic route to the primary diboraphosphine (H3B·PPhHBH2·PPhH2). It is also shown that by changing the substituent at phosphorus (Ph or Cy versust Bu) different final products result (phosphido-borane or base stabilized phosphino-borane respectively). These studies provide detailed insight into the pathways that are operating during dehydropolymerization.

Correction: Dehydrocoupling of phosphine-boranes using the [RhCp*Me(PMe3)(CH2Cl2)][BArF4] precatalyst: stoichiometric and catalytic studies.

[This corrects the article DOI: 10.1039/C5SC04150C.].

Effect of the phosphine steric and electronic profile on the Rh-promoted dehydrocoupling of phosphine-boranes.

The electronic and steric effects in the stoichiometric dehydrocoupling of secondary and primary phosphine-boranes H3B·PR2H [R = 3,5-(CF3)2C6H3; p-(CF3)C6H4; p-(OMe)C6H4; adamantyl, Ad] and H3B·PCyH2 to form the metal-bound linear diboraphosphines H3B·PR2BH2·PR2H and H3B·PRHBH2·PRH2, respectively, are reported. Reaction of [Rh(L)(η(6)-FC6H5)][BAr(F)4] [L = Ph2P(CH2)3PPh2, Ar(F) = 3,5-(CF3)2C6H3] with 2 equiv of H3B·PR2H affords [Rh(L)(H)(σ,η-PR2BH3)(η(1)-H3B·PR2H)][BAr(F)4]. These complexes undergo dehydrocoupling to give the diboraphosphine complexes [Rh(L)(H)(σ,η(2)-PR2·BH2PR2·BH3)][BAr(F)4]. With electron-withdrawing groups on the phosphine-borane there is the parallel formation of the products of B-P cleavage, [Rh(L)(PR2H)2][BAr(F)4], while with electron-donating groups no parallel product is formed. For the bulky, electron rich, H3B·P(Ad)2H no dehydrocoupling is observed, but an intermediate Rh(I) σ phosphine-borane complex is formed, [Rh(L){η(2)-H3B·P(Ad)2H}][BAr(F)4], that undergoes B-P bond cleavage to give [Rh(L){η(1)-H3B·P(Ad)2H}{P(Ad)2H}][BAr(F)4]. The relative rates of dehydrocoupling of H3B·PR2H (R = aryl) show that increasingly electron-withdrawing substituents result in faster dehydrocoupling, but also suffer from the formation of the parallel product resulting from P-B bond cleavage. H3B·PCyH2 undergoes a similar dehydrocoupling process, and gives a mixture of stereoisomers of the resulting metal-bound diboraphosphine that arise from activation of the prochiral P-H bonds, with one stereoisomer favored. This diastereomeric mixture may also be biased by use of a chiral phosphine ligand. The selectivity and efficiencies of resulting catalytic dehydrocoupling processes are also briefly discussed.

CO2 as a reaction ingredient for the construction of metal cages: a carbonate-panelled [Gd6Cu3] tridiminished icosahedron.

A CO3(2-)-panelled [Gd(III)6Cu(II)3] cage conforming to a tridiminished icosahedron is synthesised by bubbling CO2 through a solution of Gd(III) and Cu(II) ions.

Synthetic, structural, spectroscopic and theoretical study of a Mn(III)-Cu(II) dimer containing a Jahn-Teller compressed Mn ion.

The heterobimetallic complex [Cu(II)Mn(III)(L)(2)(py)(4)](ClO(4))·EtOH (1) built using the pro-ligand 2,2'-biphenol (LH(2)), contains a rare example of a Jahn-Teller compressed Mn(III) centre. Dc magnetic susceptibility measurements on 1 reveal a strong antiferromagnetic exchange between the Cu(II) and Mn(III) ions mediated through the phenolate O-atoms (J = -33.4 cm(-1)), with magnetisation measurements at low temperatures and high fields suggesting significant anisotropy. Simulations of high-field and high frequency powder EPR data suggest a single-ion anisotropy D(Mn(III)) = +4.45 cm(-1). DFT calculations also yield an antiferromagnetic exchange for 1, though the magnitude is overestimated (J(DFT) = -71 cm(-1)). Calculations reveal that the antiferromagnetic interaction essentially stems from the Mn(d(x(2)-y(2)))-Cu(d(x(2)-y(2))) interaction. The computed single-ion anisotropy and cluster anisotropy also correlates well with experiment. A larger cluster anisotropy for the S = 3/2 state compared to the single-ion anisotropy of Mn(III) is rationalised on the basis of orbital mixing and various contributions that arise due to the spin-orbit interaction.

Net toroidal magnetic moment in the ground state of a {Dy6}-triethanolamine ring.

A toroidal magnetic moment in the absence of conventional total magnetic moment is observed in a {Dy(6)} ring. The reason for the net toroidal arrangement of the local magnetic moments is the high symmetry of the complex in combination with strong intra-molecular dipolar interactions between Dy ions. The description of single-ion and inter-ion anisotropic magnetic interactions is achieved here for the first time fully ab initio, i.e., without use of phenomenological parameters.

Cationic Au(I) alkyne complexes: synthesis, structure and reactivity.

Complexes of the type [(Bu(t)(3)P)Au(eta(2)-alkyne)][SbF(6)] can be accessed readily by treatment of CH(2)Cl(2) solutions of the alkyne with [AuCl(PBu(t)(3))]/AgSbF(6); when the alkyne carries one or two Me(3)Si substituents, desilylation reactions can occur leading to species with gold bonding in intricate bonding motifs to the C[triple bond]C fragments.