Nailing of proximal ulna fractures: biomechanical comparison of a new locked nail with angular stable plating.

PURPOSE: Proximal ulna fractures are common injuries and frequently treated with angular stable plating. This surgical option shows good functional results. Relevant drawbacks such as large soft tissue exposure, compromised blood supply of fracture fragments and disturbing osteosynthetic material are described. The aim of this study was to compare a new locked proximal ulna nail with angular stable plating in a biomechanical testing setup for extraarticular proximal ulna fractures. METHODS: Ten pairs of sawbones with a Jupiter type IIB proximal ulna fracture (OTA 2U1A3.1) were tested after osteosynthesis with the mentioned implants in a servo-pneumatic testing machine. The testing setup simulates physiological joint motion (0°-90°) under cyclic loading (30-300 N). Primary stability and loosening of both constructs were quantified using micromotion video-analysis after 608 test cycles. RESULTS: The micromotion analysis showed significantly higher primary stability of the locked nail (0.29 ± 0.13 mm) compared to the angular stable plate (0.97 ± 0.30 mm, p < 0.001). Both implants showed a low amount of loosening after completion of the test cycles. The construct with the locked nail (0.08 ± 0.06 mm) showed significantly lower dislocation of the fragments measured at the anterior cortex (plate 0.24 ± 0.13 mm, p < 0.001). CONCLUSION: Nailing of proximal ulna fractures shows significantly higher primary stability and lower loosening compared to angular stable plating in our testing setup.

Medial buttressing of the quadrilateral surface in acetabular and periprosthetic acetabular fractures.

BACKGROUND: In geriatric acetabular fractures, the quadrilateral plate is often involved in the fracture pattern and medially displaced. Open reduction and internal fixation (ORIF) includes reduction of the quadrilateral plate and securing its position. In this study, the concept of medial buttressing in acute and periprosthetic acetabular fractures is evaluated. MATERIALS AND METHODS: Patients, who sustained an acetabular fracture between 2012 and 2018, in whom ORIF with a specific implant for medial buttressing was performed, were included in the study. Patients were divided in two groups; acute acetabular fractures (group 1) and periprosthetic acetabular fractures (group 2). Demographics, type of fracture, surgical approach, type of implant for medial buttressing, comorbidities, general and surgical in-hospital complications and length of hospital stay were recorded retrospectively. The following data were collected from the surviving patients by telephone interview: EQ-5D-5L, SF-8 physical and SF-8 mental before trauma and at follow-up, UCLA activity scale, Parker Mobility Score and Numeric Rating Scale. RESULTS: Forty-six patients were included in this study, 30 males (65.2%) and 16 females (34.8%). Forty patients were included group 1 and six patients in group 2. The median age of patients of group 1 was 78 years. Among them, 82.5% presented with comorbidities. Their median length of in-hospital stay was 20.5 days. 57.5% of patients suffered from in-hospital complications. The concept of medial buttressing was successful in all but one patient. ORIF together with primary total hip arthroplasty (THA) was carried out as a single stage procedure in 3 patients. Secondary THA was performed in 5 additional patients (5/37 = 13.5%) within the observation period. Among surviving patients, 79.2% were evaluated after 3 years of follow-up. Quality of life, activity level and mobility dropped importantly and were lower than the values of a German reference population. SF-8 mental did not change. The median age of patients of group 2 was 79.5 years, all of them presented with one or several comorbidities. The median length of in-hospital stay was 18.5 days. 50% of patients suffered from in-hospital complications. The concept of medial buttressing was successful in all patients. 5 of 6 patients (83.3%) could be evaluated after a median of 136 weeks. In none of these patients, secondary surgery was necessary. Quality of life, activity level and mobility importantly dropped as well in this group. SF-8 mental remained unchanged. CONCLUSION: In geriatric acetabular fractures with involvement and medial displacement of the quadrilateral plate, medial buttressing as part of ORIF proved to be reliable. Only 13.5% of patients of group 1 needed a secondary THA within 3 years of follow-up, which is lower than in comparable studies. Despite successful surgery, quality of life, activity level and mobility dropped importantly in all patients. The loss of independence did however not influence SF-8 mental values.

Nailing vs. plating in comminuted proximal ulna fractures - a biomechanical analysis.

BACKGROUND: Comminuted proximal ulna fractures are severe injuries with a high degree of instability. These injuries require surgical treatment, usually angular stable plating or double plating is performed. Nailing of proximal ulna fracture is described but not performed regularly. The aim of this study was to compare a newly developed, locked proximal ulna nail with an angular stable plate in an unstable fracture of the proximal ulna. We hypothesize, that locked nailing of the proximal ulna will provide non-inferior stability compared to locked plating. METHODS: A defect fracture distal to the coronoid was simulated in 20 sawbones. After nailing or plate osteosynthesis the constructs were tested in a servo-pneumatic testing machine under physiological joint motion (0°-90°) and cyclic loading (30 N - 300 N). Intercyclic osteotomy gap motion and plastic deformation of the constructs were analyzed using micromotion video-analysis. RESULTS: The locked nail showed lower osteotomy gap motion (0.50 ± 0.15 mm) compared to the angular stable plate (1.57 ± 0.37 mm, p < 0.001). At the anterior cortex the plastic deformation of the constructs was significantly lower for the locked nail (0.09 ± 0.17 mm vs. 0.39 ± 0.27 mm, p = 0.003). No statistically significant differences were observed at the posterior cortex for both parameters. CONCLUSIONS: Nail osteosynthesis in comminuted proximal ulna fractures shows lower osteotomy gap motion and lower amount of plastic deformation compared to locking plate osteosynthesis under laboratory conditions.

Isolated Pubic Ramus Fractures Are Serious Adverse Events for Elderly Persons: An Observational Study on 138 Patients with Fragility Fractures of the Pelvis Type I (FFP Type I).

BACKGROUND: Fractures of the pubic ramus without involvement of the posterior pelvic ring represent a minority of fragility fractures of the pelvis (FFP). The natural history of patients suffering this FFP Type I has not been described so far. MATERIAL AND METHODS: All patients, who were admitted with isolated pubic ramus fractures between 2007 and mid-2018, have been reviewed. Epidemiologic data, comorbidities, in-hospital complications, and one-year mortality were recorded. Of all surviving patients, living condition before the fracture and at follow-up was noted. Mobility was scored with the Parker Mobility Score, quality of life with the European Quality of Life 5 Dimensions 3 Level (EQ-5D-3L), subjective sensation of pain with the Numeric Rating Scale (NRS). RESULTS: A consecutive series of 138 patients was included in the study. There were 117 women (84.8%) and 21 men (15.2%). Mean age was 80.6 years (SD 8.6 years). 89.1% of patients presented with comorbidities, 81.2% of them had cardiovascular diseases. Five patients (4%) died during hospital-stay. Median in-hospital stay was eight days (2-45 days). There were in-hospital complications in 16.5%, urinary tract infections, and pneumonia being the most frequent. One-year mortality was 16.7%. Reference values for the normal population of the same age are 5.9% for men and 4.0% for women. One-year mortality rate was 22.2% in the patient group of 80 years or above and 8.8% in the patient group below the age of 80. The rate of surviving patients living at home with or without assistance dropped from 80.5% to 65.3%. The median EQ-5D-Index Value was 0.62 (0.04-1; IQR 0.5-0.78). Reference value for the normal population is 0.78. Average PMS was 4 and NRS 3. Within a two-year period, additional fragility fractures occurred in 21.2% and antiresorptive medication was taken by only 45.2% of patients. CONCLUSION: Pubic ramus fractures without involvement of the posterior pelvis (FFP Type I) are serious adverse events for elderly persons. During follow-up, there is an excess mortality, a loss of independence, a restricted mobility, and a decreased quality of life. Pubic ramus fractures are indicators for the need to optimize the patient's general condition.

Computer tomographic analysis of anatomic characteristics of the ulna - essential parameters for preshaped implants.

PURPOSE: Anatomically preshaped implants are needed for exact restoration of the anatomy after fractures of the proximal ulna and ulnar shaft, which enables a good functional outcome. Aim of this computed tomographic analysis was to identify specific characteristics of the ulna. The data serve for the development of a new intramedullary implant for stabilisation of proximal and diaphyseal ulna fractures. METHODS: With a standardized research method 100 CT scans of the ulna were evaluated regarding anatomic parameters like width of the medullary canal, proximal ulna dorsal angulation and varus angulation. Also, correlations of these parameters were analyzed statistically. RESULTS: The mean proximal ulna dorsal angulation (PUDA) was 6.4° (SD 2.8°), while the mean varus angulation of the proximal ulna was 12.4° (SD 3.3°). The length of the ulna bone was 253.6 mm (SD 19.9 mm) on average. The average minimum diameter of the medullary canal was 4.2 mm (SD 1.1 mm) located at 141.3 mm (SD 19.7 mm) from the olecranon tip. There is a positive correlation between age and minimum diameter in our patient cohort (p< 0.001). CONCLUSION: Our study described the anatomy of the proximal ulna and the ulna shaft with a reproducible research method in a representative patient cohort. The knowledge of the evaluated anatomic parameters can lead to an improvement of any implant design for the fixation of proximal and diaphyseal ulna fractures.

Nailing of diaphyseal ulna fractures in adults-biomechanical evaluation of a novel implant in comparison with locked plating.

BACKGROUND: Adult forearm fractures require surgical treatment in most cases. Open reduction and internal fixation with plate osteosynthesis is the therapy of choice. Intramedullary fixation offers several advantages compared to plate fixation but is not routinely used. The aim of our study was to compare a newly designed ulna nail with angular stable plating in a biomechanical testing setup of an ulna shaft fracture with a diaphyseal defect. METHODS: Ten pairs of sawbones with a defect osteotomy of the ulna shaft (OTA 2U2C3) were fixed with an interlocked nail or locked plate osteosynthesis. The constructs were tested under four-point bending, torsional loading and axial loading in a servo-pneumatic testing machine to compare the stiffness of both stabilization methods. RESULTS: The nail constructs show lower yet sufficient bending stiffness (62.25 ± 6.64 N/mm) compared to the plate constructs (71.2 ± 5.98 N/mm, p = 0.005). The torsional loading test shows superior stiffness of the plate constructs (0.24 ± 0.03 Nm/deg vs. 0.1 ± 0.01 Nm/deg; p < 0.001), while the axial loading shows superior stiffness of the nail constructs (1028.9 ± 402.1 N/mm vs. 343.9 ± 112.6 N/mm; p < 0.001). CONCLUSIONS: Intramedullary nailing of ulna shaft fractures obtains sufficient but lower stability in bending and torsional loading when compared to rigid angular stable plating and could be an alternative technique to plate fixation. The lower stability and the closed stabilization technique allow for a rapid periosteal healing, which is not present in stiffer constructs.

Percutaneous iliosacral screw fixation after osteoporotic posterior ring fractures of the pelvis reduces pain significantly in elderly patients.

INTRODUCTION: Osteoporotic posterior ring fractures of the pelvis are common injuries in the elderly, but the treatment of these fractures still remains controversial. Percutaneous iliosacral screw fixation is one surgical option if conservative treatment cannot provide sufficient pain reduction. The aim of this study is to provide short-term results of elderly patients with percutaneous screw fixation. METHODS: 30 patients with posterior ring fractures were treated between 12/2009 and 01/2014 with percutaneous iliosacral screw fixation. Patients' mean age was 78.4 years. Concerning short-term outcome, we focused on initial pain level and postoperative pain reduction together with intra- and postoperative complications. RESULTS: The average hospital stay was 23.7 days, with surgical treatment performed after an average of 9.2 days. 90% of our patients were female. All 30 patients had a lower level of pain at discharge compared with admission or immediately prior to surgery. The difference in pain level at admission compared with the pain level upon discharge showed a mean reduction from 6.8 to 1.8 with a statistically significant change (P≤0.001). 24 of 30 patients had no registered complications, one screw malpositioning with postoperative nerve irritation occurred. DISCUSSION: Conventional percutaneous iliosacral screw fixation is a successful operative treatment for elderly patients with persistent lower back pain after unstable posterior ring fractures of the pelvis. Intra- and postoperative complications are rare, so this treatment can be regarded as a safe procedure. LEVEL OF EVIDENCE: IV (retrospective study).