Effects of Temperature, Axial Ligand, and Photoexcitation on the Structure and Spin-State of Nickel(II) Complexes with Water-Soluble 5,10,15,20-Tetrakis(1-methylpyridinium-4-yl)porphyrin.

Water-soluble metalloporphyrins, depending on the metal center, possess special spectral, coordination, and photochemical features. In nickel(II) porphyrins, the Ni(II) center can occur with low-spin or high-spin electronic configuration. In aqueous solution, the cationic nickel(II) complex (Ni(II)TMPyP4+, where H2TMPyP4+ = 5,10,15,20-tetrakis(1-methylpyridinium-4-yl)porphyrin), exists in both forms in equilibrium. In this study, an equilibrium system involving the low-spin and high-spin forms of Ni(II)TMPyP4+ was investigated via application of irradiation, temperature change, and various potential axial ligands. Soret band excitation of this aqueous system, in the absence of additional axial ligands, resulted in a shift in the equilibrium toward the low-spin species due to the removal of axial solvent ligands. The kinetics and the thermodynamics of the processes were also studied via determination of the rate and equilibrium constants, as well as the ΔS, ΔH, and ΔG values. Temperature increase had a similar effect. The equilibrium of the spin isomers was also shifted by decreasing the solvent polarity (using n-propanol) as well as by the addition of a stronger coordinating axial ligand (such as ammonia). Since triethanolamine is an efficient electron donor in Ni(II)TMPyP4+-based photocatalytic systems, its interaction with this metalloporphyin was also studied. The results promote the development of efficient photocatalytic systems based on this complex.

Effect of Copper-Modification of g-C3N4 on the Visible-Light-Driven Photocatalytic Oxidation of Nitrophenols.

Graphitic carbon nitride (g-C3N4) has proved to be a promising heterogeneous photocatalyst in the visible range. It can be used, among others, for the oxidative conversion of environmentally harmful nitrophenols occurring in wastewater. However, its photocatalytic activity needs to be enhanced, which can be achieved by modification with various dopants. In our work, copper-modified g-C3N4 was prepared by ultrasonic impregnation of the pristine g-C3N4 synthesized from thiourea. The morphology, microstructure, and optical properties of the photocatalysts were characterized by XRD, FT-IR, DRS, SEM, XPS, and TEM. DRS analysis indicated a slight change in both the CB and the VB energies of Cu/g-C3N4 compared to those of g-C3N4. The efficiency of the photocatalysts prepared was tested by the degradation of nitrophenols. Copper modification caused a sevenfold increase in the rate of 4-nitrophenol degradation in the presence of H2O2 at pH = 3. This dramatic enhancement can be attributed to the synergistic effect of copper and H2O2 in this photocatalytic system. A minor Fenton reaction role was also detected. The reusability of the Cu/g-C3N4 catalyst was demonstrated through five cycles. Copper-modified g-C3N4 with H2O2 proved to be applicable for efficient visible-light-driven photocatalytic oxidative degradation of nitrophenols.

Photocatalytic H2 Production by Visible Light on Cd0.5Zn0.5S Photocatalysts Modified with Ni(OH)2 by Impregnation Method.

Nowadays, the study of environmentally friendly ways of producing hydrogen as a green energy source is an increasingly important challenge. One of these potential processes is the heterogeneous photocatalytic splitting of water or other hydrogen sources such as H2S or its alkaline solution. The most common catalysts used for H2 production from Na2S solution are the CdS-ZnS type catalysts, whose efficiency can be further enhanced by Ni-modification. In this work, the surface of Cd0.5Zn0.5S composite was modified with Ni(II) compound for photocatalytic H2 generation. Besides two conventional methods, impregnation was also applied, which is a simple but unconventional modification technique for the CdS-type catalysts. Among the catalysts modified with 1% Ni(II), the impregnation method resulted in the highest activity, for which a quantum efficiency of 15.8% was achieved by using a 415 nm LED and Na2S-Na2SO3 sacrificial solution. This corresponded to an outstanding rate of 170 mmol H2/h/g under the given experimental conditions. The catalysts were characterized by DRS, XRD, TEM, STEM-EDS, and XPS analyses, which confirmed that Ni(II) is mainly present as Ni(OH)2 on the surface of the CdS-ZnS composite. The observations from the illumination experiments indicated that Ni(OH)2 was oxidized during the reaction, and that it therefore played a hole-trapping role.

Photochemical Transformations of Diverse Biologically Active Resveratrol Analogs in Batch and Flow Reactors.

Previous biological tests have shown that some resveratrol analogs exhibited significant antioxidative and cholinesterase inhibitory potential, as evidenced by lower IC50 values compared to the established standards, resveratrol and galantamine, respectively. Photochemical transformations were made in parallel on these compounds in the presence of porphyrin photocatalysts in batch and microreactor, showing the significant advantage of flow photochemistry concerning productivity, selectivity, and yields. In this research, the products of photocatalysis and direct irradiation (photolysis) of resveratrol analogs were compared to elucidate how the types and ratios of the products depend on the excitation energy, to reveal the effects of the substituent on the photoinduced reactions and to rationalize experimentally and computationally the nature and ratio of the obtained products. Thus, two main paths were computed in agreement with the experimental results: isomerization with the participation of triplet state intermediates to yield the experimentally detected cis-isomers and subsequent cyclization following a pathway not available for the trans-isomers. The investigation of five model compounds confirmed the advantages of the flow photoreactor in the photochemical reactions of heterocyclic resveratrol analogs.

Characterization of Various Titanium-Dioxide-Based Catalysts Regarding Photocatalytic Mineralization of Carbamazepine also Combined with Ozonation.

Titanium-dioxide-based semiconductors proved to be appropriate for photocatalytic application to efficiently degrade emerging organic pollutants such as various herbicides, pesticides, and pharmaceuticals in waters of environmental importance. The characterization of various TiO2 catalysts, both bare and modified (Ag- and/or N-doped), by mechanochemical treatment was carried out in this work, regarding their structure, morphology, and photocatalytic activity. For the latter investigations, carbamazepine, an antidepressant, proved to be applicable and versatile. The photocatalytic behavior of the catalysts was studied under both UV and visible light. Besides the decomposition efficiency, monitoring the intermediates provided information on the degradation mechanisms. Mechanochemical treatment significantly increased the particle size (from 30 nm to 10 µm), causing a considerable (0.14 eV) decrease in the band gap. Depending on the irradiation wavelength and the catalyst, the activity orders differed, indicating that, in the mineralization processes of carbamazepine, the importance of the different oxidizing radicals considerably deviated, e.g., Ag-TiO2 < DP25-TiO2 < ground-DP25-TiO2 < N-TiO2 ≈ N-Ag-TiO2 for O2•− and N-TiO2 ≈ Ag-TiO2 < N-Ag-TiO2 < ground-DP25-TiO2 ≈ DP25-TiO2 for HO• generation under UV irradiation. Toxicity studies have shown that the resulting intermediates are more toxic than the starting drug molecule, so full mineralization is required. This could be realized by a synergistic combination of heterogeneous photocatalysis and ozonation.

Resveratrol-Maltol and Resveratrol-Thiophene Hybrids as Cholinesterase Inhibitors and Antioxidants: Synthesis, Biometal Chelating Capability and Crystal Structure.

New resveratrol-thiophene and resveratrol-maltol hybrids were synthesized as cholinesterase inhibitors and antioxidants. As with photostability experiments, biological tests also found remarkable differences in the properties and behavior of thiophene and maltol hybrids. While resveratrol-thiophene hybrids have excellent inhibitory and antioxidant properties (similar to the activity of reference drug galantamine), maltols have been proven to be weaker inhibitors and antioxidants. The molecular docking of selected active ligands gave insight into the structures of docked enzymes. It enabled the identification of interactions between the ligand and the active site of both cholinesterases. The maltols that proved to be active cholinesterase inhibitors were able to coordinate Fe3+ ion, forming complexes of 1:1 composition. Their formation constants, determined by spectrophotometry, are very similar, lgK = 11.6-12.6, suggesting that Fe3+ binds to the common hydroxy-pyranone moiety and is hardly affected by the other aromatic part of the ligand. Accordingly, the characteristic bands in their individual absorption spectra are uniformly red-shifted relative to those of the free ligands. The crystal structures of two new resveratrol-maltol hybrids were recorded, giving additional information on the molecules' intermolecular hydrogen bonds and packing. In this way, several functionalities of these new resveratrol hybrids were examined as a necessary approach to finding more effective drugs for complicated neurodegenerative diseases.

Effects of Preparation Conditions on the Efficiency of Visible-Light-Driven Hydrogen Generation Based on Ni(II)-Modified Cd0.25Zn0.75S Photocatalysts.

Hydrogen as an environmentally friendly fuel can be produced by photocatalytic procedures from aqueous systems, utilizing H2S, an industrial side-product, by conversion and storage of renewable solar energy. Although composites of CdS and ZnS prepared by co-precipitation are very efficient in heterogeneous photocatalytic H2 generation, the optimal conditions for their synthesis and the effects of the various influencing factors are still not fully clarified. In this work, we investigated how the efficiency of Cd0.25Zn0.75S composites modified with Ni(II) was affected by the doping method, Ni-content, hydrothermal treatment, and presence of a complexing agent (ammonia) used in the preparation. The composition, optical, and structural properties of the photocatalysts prepared were determined by ICP, DRS, XRD, TEM, and STEM-EDS. Although hydrothermal treatment proved preferable for Ni-free composites, Ni-modification was more efficient for untreated composites precipitated from ammonia-containing media. The best efficiency (14.9% quantum yield at 380 nm irradiation, 109.8 mmol/g/h hydrogen evolution rate) achieved by surface modification with 0.1-0.3% Ni(II) was 15% and 20% better than those for hydrothermally treated catalyst and similarly prepared Pt-modified one, respectively. Structural characterization of the composites clearly confirmed that the Ni2+ ions were not embedded into the CdS-ZnS crystal lattice but were enriched on the surface of particles of the original catalyst in the form of NiO or Ni(OH)2. This co-catalyst increased the efficiency by electron-trapping, but its too high amount caused an opposite effect by diminishing the excitable surface of the CdS-ZnS particles.

Biodegradation of two persistent aromatic compounds by using oil shale.

Low-cost oil shale was investigated as a biodegradation promoter material, in order to exploit its potential for more widespread and efficient usage in the elimination of pollution. Degradation of two model pollutants, 4-nitrophenol and phenol, was examined in the presence of oil shale in a batch system. In order to investigate the role of the natural microflora of the oil shale in degradation, sodium azide was added to inhibit microbial growth. The effect of metal ions was also investigated. In the sodium azide-free solutions the model pollutants were completely degraded up to 2000 µmol/L concentration in a dose-dependent way, while the addition of sodium azide delayed greatly but did not stop the degradation. Manganese(II) ions increased the rate of the degradation of 4-nitrophenol, and given quantities of iron(II), manganese(II) or zinc(II) ions were also effective in degradation of phenol. Our results suggest that oil shale is not only an adsorbent but has an active role in the degradation of pollutants by its natural microflora. Utilizing these features of oil shale, it is a suitable candidate as an ameliorating agent, which can also be used in industrial size.

Comparing the Degradation Potential of Copper(II), Iron(II), Iron(III) Oxides, and Their Composite Nanoparticles in a Heterogeneous Photo-Fenton System.

Heterogeneous photo-Fenton systems offer efficient solutions for the treatment of wastewaters in the textile industry. This study investigated the fabrication and structural characterization of novel peculiar-shaped CuIIO, FeIII 2O3, and FeIIO nanoparticles (NPs) compared to the properties of the iron(II)-doped copper ferrite CuII 0.4FeII 0.6FeIII 2O4. The photocatalytic efficiencies of these NPs and the composite of the simple oxides (CuIIO/FeIIO/FeIII 2O3) regarding the degradation of methylene blue (MB) and rhodamine B (RhB) as model dyes were also determined. The catalysts were synthesized via simple co-precipitation and calcination technique. X-ray diffractometry (XRD), scanning electron microscopy (SEM), and diffuse reflectance spectroscopy (DRS) were utilized for structural characterization. The structure of CuIIO was bead-like connected into threads, FeIII 2O3 was rod-like, while FeIIO pallet-like, with average crystallite sizes of 18.9, 36.9, and 37.1 nm, respectively. The highest degradation efficiency was achieved by CuIIO for RhB and by CuII 0.4FeII 0.6FeIII 2O4 for MB. The CuIIO/FeIIO/FeIII 2O3 composite proved to be the second-best catalyst in both cases, with excellent reusability. Hence, these NPs can be successfully applied as heterogeneous photo-Fenton catalysts for the removal of hazardous pollutants. Moreover, the simple metal oxides and the iron(II)-doped copper ferrite displayed a sufficient antibacterial activity against Gram-negative Vibrio fischeri.

The Photocatalytic and Antibacterial Performance of Nitrogen-Doped TiO2: Surface-Structure Dependence and Silver-Deposition Effect.

Catalysts for visible-light-driven oxidative cleaning processes and antibacterial applications (also in the dark) were developed. In order to extend the photoactivity of titanium dioxide into the visible region, nitrogen-doped TiO2 catalysts with hollow and non-hollow structures were synthesized by co-precipitation (NT-A) and sol-gel (NT-U) methods, respectively. To increase their photocatalytic and antibacterial efficiencies, various amounts of silver were successfully loaded on the surfaces of these catalysts by using a facile photo-deposition technique. Their physical and chemical properties were evaluated by using scanning electron microscopy (SEM), transmission electron microscopy-energy dispersive X-ray spectroscopy (TEM-EDS), Brunauer-Emmett-Teller (BET) surface area, X-ray diffraction (XRD), and diffuse reflectance spectra (DRS). The photocatalytic performances of the synthesized catalysts were examined in coumarin and 1,4-hydroquinone solutions. The results showed that the hollow structure of NT-A played an important role in obtaining high specific surface area and appreciable photoactivity. In addition, Ag-loading on the surface of non-hollow structured NT-U could double the photocatalytic performance with an optimum Ag concentration of 10-6 mol g-1, while a slight but monotonous decrease was caused in this respect for the hollow surface of NTA upon increasing Ag concentration. Comparing the catalysts with different structures regarding the photocatalytic performance, silverized non-hollow NT-U proved competitive with the hollow NT-A catalyst without Ag-loading for efficient visible-light-driven photocatalytic oxidative degradations. The former one, due to the silver nanoparticles on the catalyst surface, displayed an appreciable antibacterial activity, which was comparable to that of a reference material practically applied for disinfection in polymer coatings.

Synthesis, Characterization and Application of Iron(II) Doped Copper Ferrites (CuII(x)FeII(1-x)FeIII2O4) as Novel Heterogeneous Photo-Fenton Catalysts.

The heterogeneous photo-Fenton type system has huge fame in the field of wastewater treatment due to its reusability and appreciable photoactivity within a wide pH range. This research investigates the synthesis and characterization of iron(II) doped copper ferrite (CuII(x)FeII(1-x)FeIII2O4 nanoparticles (NPs) and their photocatalytic applications for the degradation of methylene blue (MB) as a model dye. The NPs were prepared via simple co-precipitation technique and calcination. The NPs were characterized by using Raman spectroscopy, X-ray diffractometry (XRD), scanning electron microscopy (SEM), and diffuse reflectance spectroscopy (DRS). SEM reveals the structural change from the spherical-like particles into needle-like fine particles as the consequence of the increasing ratio of copper(II) in the ferrites, accompanied by the decrease of the optical band-gap energies from 2.02 to 1.25 eV. The three major determinants of heterogeneous photo-Fenton system, namely NPs concentration, hydrogen peroxide concentration and pH, on the photocatalytic degradation of MB were studied. The reusability of NPs was found to be continuously increasing during 4 cycles. It was concluded that iron(II) doped copper ferrites, due to their favorable band-gap energies and peculiar structures, exhibit a strong potential for photocatalytic-degradation of dyes, for example, MB.

Assessment of the potential bactericide effect of self-cleaning floors: a proposed protocol.

The antibacterial properties of self-cleaning coatings are based on bactericide nanoparticles (NPs). Ecotoxicity of these NPs have been assessed mostly in suspension, using standard bioassays. Here a protocol is proposed to test actual coating samples, using the Vibrio fischeri bioluminescence inhibition bioassay. The protocol was designed to test bactericide properties of specially coated PVC floors being used in hospital environments under quasinatural conditions, such as prolonged exposure or room temperature. To take into consideration that the light output of the bacteria under prolonged exposure naturally changes, a correction factor is proposed.

Explanation for the Multi-Component Scintillation of Cerium Fluoride Through the Equilibrium and Photophysical Investigation of Cerium(III)-Fluoro Complexes.

CeF3 displays favorable scintillation properties, which have been utilized for decades in various solid-state systems. Its emission undergoes multi-component decays, which were interpreted by lattice defects and so-called intrinsic features herein. This study of the complex equilibria in connection with photophysical behavior of the cerium(III)-fluoride system in solution gave us the possibility to reveal the individual contribution of the [CeIIIFx(H2O)9-x]3-x species to the photoluminescence. Spectrophotometry and spectrofluorometry (also in time-resolved mode) were used, and combined with sophisticated evaluation methods regarding both the complex equilibria and the kinetics of the photoinduced processes. The individual photophysical parameters of the [CeIIIFx(H2O)9-x]3-x complexes were determined. For the kinetic evaluation, three methods of various simplifications were applied and compared. The results indicated that the rates of some excited-state equilibrium processes were comparable to those of the emission decay steps. Our results also contribute to the explanation of the multi-component emission decays in the CeF3-containing scintillators, due to the various coordination environments of Ce3+, which can be affected by the excitation leading to the dissociation of the metal-ligand bonds.

Formation, Photophysics, and Photochemistry of Anionic Lanthanide(III) Mono- and Bisporphyrins.

Since water-soluble porphyrin complexes of lanthanides(III) have proved to be promising for medical applications (e.g., luminescence imaging, photodynamic therapy, and theranostics), the investigation of the formation, photophysical, and photochemical properties of such coordination compounds provides useful pieces of information for their potential usage. Steady-state and time-resolved fluorometry, UV-Vis absorption spectroscopy, and continuous-wave photolysis were utilized for this purpose. 5,10,15,20-Tetrakis(4-sulfonatophenyl)porphyrin formed mono- and bisporphyrin complexes with samarium(III), europium(III), and gadolinium(III) as representatives in the middle of the lanthanide series. The special photoinduced behavior of these compounds was mostly determined by the position of the metal center, which was located out of the ligand plane, thus distorting it. Besides, the photochemical and, especially, photophysical features of the corresponding mono- and bisporphyrin complexes were similar because, in the latter species, two monoporphyrins were connected by a weak metal bridge between the peripheral sulfonato substituents (tail-to-tail dimerization). The formation of these coordination compounds and the transformation reactions between the mono- and bisporphyrins were rather slow in the dark at room temperature. These processes were accelerated by visible irradiation. However, dissociation and, especially, redox degradation were the main photoreactions in these systems, although with low quantum yields. Additionally, depending on the excitation wavelength, new types of photoproducts were also detected.

Analysis of Non-Ionic Surfactant Triton X-100 Using Hydrophilic Interaction Liquid Chromatography and Mass Spectrometry.

It is well known that surfactants increase the solubility of hydrophobic organic compounds and cause adverse environmental effects. The removal of these compounds from the contaminated soil or ground-water is particularly difficult due to their water soluble feature. In this work, an ultra-high performance hydrophilic interaction liquid chromatographic method was developed for the separation of oligomers of Triton X-100 octylphenol-polyethoxylate non-ionic surfactant. Liquid chromatography-mass spectrometry (LC-MS) was used to identify the Triton X-100 compounds. There was a 44 mass unit difference between two adjacent peaks that is the molar mass of one ethylene oxide group (⁻CH 2 CH 2 O⁻). A quadratic retention model was applied for the estimation of retention of the examined non-ionic surfactant and the optimization of gradient elution conditions. The optimized method was suitable for the baseline separation of 28 Triton X-100 oligomers in five minutes.

Investigation of Hydrogen Production from Alkaline Sulfide Solution with Nanosized CdS/ZnS-PdS Photocatalyst of Various Compositions.

Hydrogen sulfide is highly toxic to humans and harmful to the environment. On the other hand, H2S is produced in large quantities in some industrial processes like the refinery of crude oil and the sweetening of natural gas. Nowadays, H2S is usually burned to sulfur and water in the Claussprocess wasting the energy of hydrogen stored in H2S. Progress in the area of photocatalysis results in considerable development of the heterogeneous photocatalytic conversion of hydrogen sulfide into hydrogen gas. In this work, photocatalytic hydrogen production from alkaline sulfide solutions was investigated, utilizing various ZnS/CdS composites modified with PdS as cocatalyst. The highest photocatalytic activity was found at 1:1 molar ratio of CdS and ZnS. At this catalyst content the optimal PdS-loading was investigated in the range of 0-0.4% (n/n); the 0.05-0.10% (n/n) PdS content proved to be most efficient. The catalyst consisted of the agglomerates of 80-150 nm size particles. During long time illuminations (10 days) the size of the agglomerates increased, but the diameter of the individual particles and the photocatalytic activity did not noticeably change. The dependence of the rate of hydrogen production on the concentration of sulfide, sulfite, and thiosulfate ions was also studied. An increase of the amount of reactants resulted in an enhancement of the reaction rate, while the presence of thiosulfate ions lowered the catalytic activity. One of the possible reasons of this effect is the side reaction of thiosulfate ions by the conduction band electrons.

TiO2-Mediated Photocatalytic Mineralization of a Non-Ionic Detergent: Comparison and Combination with Other Advanced Oxidation Procedures.

Triton X-100 is one of the most widely-applied man-made non-ionic surfactants. This detergent can hardly be degraded by biological treatment. Hence, a more efficient degradation method is indispensable for the total mineralization of this pollutant. Application of heterogeneous photocatalysis based on a TiO2 suspension is a possible solution. Its efficiency may be improved by the addition of various reagents. We have thoroughly examined the photocatalytic degradation of Triton X-100 under various circumstances. For comparison, the efficiencies of ozonation and treatment with peroxydisulfate were also determined under the same conditions. Besides, the combination of these advanced oxidation procedures (AOPs) were also studied. The mineralization of this surfactant was monitored by following the TOC and pH values, as well as the absorption and emission spectra of the reaction mixture. An ultra-high-performance liquid chromatography (UHPLC) method was developed and optimized for monitoring the degradation of Triton X-100. Intermediates were also detected by GC-MS analysis and followed during the photocatalysis, contributing to the elucidation of the degradation mechanism. This non-ionic surfactant could be efficiently degraded by TiO2-mediated heterogeneous photocatalysis. However, surprisingly, its combination with the AOPs applied in this study did not enhance the rate of the mineralization. Moreover, the presence of persulfate hindered the photocatalytic degradation.

Degradation of industrial surfactants by photocatalysis combined with ozonation.

The efficiency of titanium dioxide-mediated photocatalytic degradation of pollutants can be enhanced by combination with another advanced oxidation procedure such as ozonation. Mineralization of hydroxy- and dihydroxybenzenesulfonate based on these methods, both individually and combined, was investigated by monitoring the total organic carbon content, sulfate concentration, pH, high-performance liquid chromatography as well as the absorption spectral changes. The mineralization efficiency of the combined procedure significantly exceeded the sum of those of the individual techniques. The comparison of the disappearance of the starting material and the formation of the sulfate ions indicates that desulfonation is not the primary step of the degradation. Moreover, in the case of the combined method, ring cleavage, and thus, partial mineralization can occur without desulfonation. Efficient degradation of other, widely used industrial surfactants, such as alkylbenzene sulfonates and alkyl ether sulfates, was also achieved by heterogeneous photocatalysis combined with ozonation, offering an applicable method for the removal of these pollutants.

Equilibrium, photophysical and photochemical examination of anionic lanthanum(III) mono- and bisporphyrins: the effects of the out-of-plane structure.

Lanthanum(III) ions form kinetically labile complexes with the 5,10,15,20-tetrakis(4-sulfonatophenyl)porphyrin anion (H(2)TSPP(4-)), the compositions and formation constants of which significantly depend on the presence of potential axial ligands (at 0.01 M). Deviating from the chloride ion, acetate coordinating to the metal center hinders the formation of a bisporphyrin complex. In these lanthanum(III) complexes, the metal center, due to its large ionic radius (103.2 pm), is located out of the ligand plane, distorting it. Accordingly, the absorption and fluorescence spectra of these coordination compounds display special properties characteristic of the so-called sitting-atop (SAT) or out-of-plane (OOP) porphyrin complexes. Metalation significantly decreases the quantum yield of the fluorescence from the S(1) excited state. Quantum chemical calculations (DFT) confirm the considerable OOP displacement of the La(III) center (about 120 pm in the monoporphyrin complexes). The monoporphyrins display efficient fluorescence (Φ ≈ 0.03), while the bisporphyrin does not emit. Differing from the normal (in-plane) metalloporphyrins, the excitation of these lanthanum(III) porphyrins leads to an irreversible ligand-to-metal charge transfer (LMCT) followed by the opening of the porphyrin ring, which is also typical of OOP complexes. Dissociation releasing free-base porphyrin can also be observed upon irradiation of the monoporphyrin in acetate solution, while in the presence of chloride ions interconversions of the mono- and bisporphyrins may also take place beside the irreversible photoredox reaction.

Synthesis, photochemistry, and photophysics of butadiene derivatives: influence of the methyl group on the molecular structure and photoinduced behavior.

Novel butadiene derivatives display diverse photochemistry and photophysics. Excitation of 2-methyl-1-(o-vinylphenyl)-4-phenylbutadiene leads to the dihydronaphthalene derivative, whereas photolysis of the corresponding model o-methyl analogue results in the formation of the naphthalene-like derivative, deviating from the nonmethylated analogue of the prior starting compound and producing benzobi- and -tricyclic compounds. The effect of the methyl substituents is even more dramatic in the case of the dibutadienes. The parent unsubstituted compound undergoes photoinduced intramolecular cycloaddition giving benzobicyclo[3.2.1]octadiene, whereas the photochemical reaction of the corresponding dimethylated derivative shows only geometrical isomerization due to the steric effect of the substituents. Methyl groups on the butadiene backbones reduce the extent of conjugation, causing a blue-shift of the characteristic absorption band. The fluorescence efficiency is dramatically decreased, as a consequence of nonplanarity and reduced rigidity of the molecules due to the crowding by the methyl and phenyl groups together. Four molecules of very similar structures show dramatically different photoinduced behavior, revealing how changes of the nature and position of the substituents are valuable in understanding the photophysics and photochemistry of these types of compounds.