Colloidal and interfacial properties of spray dried pulse protein-blueberry polyphenol particles in model dispersion systems.

The phytochemical composition and physicochemical attributes of polyphenol-enriched protein particle ingredients produced with pulse proteins (e.g. chickpea protein, pea protein, and a chickpea-pea protein blend) and polyphenols recovered from wild blueberry pomace were investigated for colloidal and interfacial properties. Anthocyanins were the major polyphenol fraction (27.74-36.47 mg C3G/g) of these polyphenol-rich particles (44.95-62.08 mg GAE/g). Dispersions of pea protein-polyphenol particles showed a superior phase stability before and after heat treatment compared to the chickpea pea protein-polyphenol system. This observation was independent of the added amount of NaCl in the dispersion. In general, at quasi equilibrium state, pulse protein-polyphenol particles and parental pulse protein ingredients showed similar oil-water interfacial tension. However, pea protein-polyphenol particles demonstrated a reduced diffusion-driven oil-water interfacial adsorption rate constant compared to the parental pea protein ingredient. Overall, the obtained results suggest application potential of pea protein-polyphenol particles as a functional food/beverage ingredient.

Sonoprocessing enhances the stabilization of fisetin by encapsulation in Saccharomyces cerevisiae cells / El sonoprocesamiento mejora la estabilización de fisetina mediante encapsulación en células de Saccharomyces cerevisiae

The objective of this study was to investigate for the first time the role of S. cerevisiae natural barriers and endogenous cytoplasmatic bodies on the stabilization of fisetin encapsulated via sonoprocessing coupled to freeze-drying (FD) or spray drying (SD). Both protocols of encapsulation improved the resistance of fisetin against thermal treatments (between 60 and 150 °C) and photochemical-induced deterioration (light exposition for 60 days) compared to non-encapsulated fisetin (antioxidant activity retention of approximately 55% and 90%, respectively). When stored under constant relative humidity (from 32.8 to 90%) for 60 days, yeast carriers improved the half-life time of fisetin by up to 4-fold. Spray dried particles were smaller (4.9 μm) and showed higher fisetin release after simulated gastrointestinal digestion (55.7%) when compared to FD. Freeze-dried particles, in turn, tended to agglomerate more than SD (zeta potential −19.7 mV), resulting in reduced loading features (6.3 mg/g) and less efficient protection of fisetin to heat, photo, and moisture-induced deterioration. Overall, spray-dried sonoprocessed fisetin capsules are an efficient way to preserve fisetin against harsh conditions. Altogether, this report shows that sonoprocessing coupled to drying is an efficient, creative, and straightforward route to protect and deliver lipophilic fisetin using yeast capsules for food applications.(AU)

Spray dried acerola (Malpighia emarginata DC) juice particles to produce phytochemical-rich starch-based edible films.

This study aimed to produce spray dried acerola juice microparticles with different protein carriers to be incorporated into edible starch films. The microparticles were evaluated for solids recovery, polyphenol retention, solubility, hygroscopicity, particle size distribution, X-ray diffraction, phytochemical compounds and antioxidant activity. Acerola microparticles produced with WPI/hydrolysed collagen carriers (AWC) with higher solids recovery (53.5 ± 0.34% w/w), polyphenol retention (74.4 ± 0.44% w/w), high solubility in water (85.2 ± 0.4% w/w), total polyphenol content (128.45 ± 2.44 mg GAE/g) and good storage stability were selected to produce starch-based films by casting. As a result, cassava films with water vapour permeability of 0.29 ± 0.07 g mm/m2 h KPa, polyphenol content of 10.15 ± 0.22 mg GAE/g film and DPPH radical scavenging activity of 6.57 ± 0.13 µM TE/g film, with greater migration of polyphenol to water (6.30 ± 0.52 mg GAE/g film) were obtained. Our results show that the incorporation of phytochemical-rich fruit microparticles is a promising strategy to create biodegradable edible films.

Whey/collagen protein blend AWC was the best wall material for acerola encapsulation.Spray dried protein-acerola particles were used to formulate edible films.Water soluble phenolic-rich AWC films with antioxidant properties were produced.Acerola phenolics from starch films migrated more to water than to acid media.

Sonoprocessing enhances the stabilization of fisetin by encapsulation in Saccharomyces cerevisiae cells.

The objective of this study was to investigate for the first time the role of S. cerevisiae natural barriers and endogenous cytoplasmatic bodies on the stabilization of fisetin encapsulated via sonoprocessing coupled to freeze-drying (FD) or spray drying (SD). Both protocols of encapsulation improved the resistance of fisetin against thermal treatments (between 60 and 150 °C) and photochemical-induced deterioration (light exposition for 60 days) compared to non-encapsulated fisetin (antioxidant activity retention of approximately 55% and 90%, respectively). When stored under constant relative humidity (from 32.8 to 90%) for 60 days, yeast carriers improved the half-life time of fisetin by up to 4-fold. Spray dried particles were smaller (4.9 µm) and showed higher fisetin release after simulated gastrointestinal digestion (55.7%) when compared to FD. Freeze-dried particles, in turn, tended to agglomerate more than SD (zeta potential -19.7 mV), resulting in reduced loading features (6.3 mg/g) and less efficient protection of fisetin to heat, photo, and moisture-induced deterioration. Overall, spray-dried sonoprocessed fisetin capsules are an efficient way to preserve fisetin against harsh conditions. Altogether, this report shows that sonoprocessing coupled to drying is an efficient, creative, and straightforward route to protect and deliver lipophilic fisetin using yeast capsules for food applications.

Development of Spray Dried Spirulina Protein-Berry Pomace Polyphenol Particles to Attenuate Pollution-Induced Skin Damage: A Convergent Food-Beauty Approach.

Spray drying (SD) microencapsulation of phytochemicals from berry pomaces with Spirulina protein (SP) was incorporated into a cosmeceutical topical formulation to mitigate pollution skin damage. Initially, microparticles produced with SP and polyphenols recovered from fruit pomaces (elderberry SP-EB and muscadine grape SP-MG) were characterized regarding physicochemical and phytochemical content (polyphenol load, carotenoid and phycocyanin contents and antioxidant activity). SP had low total phenolic content (7.43 ± 0.23 mg GAE/g DW), but complexation with elderberry or muscadine grape pomaces polyphenols led to a substantial increase (27.63 ± 1.15 SP-EB and 111.0 ± 2.6 mg GAE/g DW SP-MG). SP-MG particles had higher anthocyanin (26.87 ± 1.25 mg/g) and proanthocyanidin (9.02 ± 0.74 mg/g) contents compared to SP-EB particles. SP-MG were prioritized to prepare a topical gel to attenuate skin oxinflammatory markers and prevent skin barrier disruption using ex vivo human biopsies exposed to diesel engine exhaust (DEE). The immunofluorescence results showed increased oxidative protein damage and inflammation associated with impaired skin barrier function after DEE exposure while topical application of gel formulated with SP-MG mitigated these effects. Overall, this study demonstrated that protein-polyphenol complexation is a synergistic strategy to stabilize and deliver residual fruit/algae phytoactives into cosmeceutical products for skin health applications.

Effect of Microwave and Ultrasound-Assisted Extraction on the Phytochemical and In Vitro Biological Properties of Willow (Salix alba) Bark Aqueous and Ethanolic Extracts.

White willow (Salix alba) is a medicinal plant used in folk medicine. In this study, aqueous and ethanolic willow bark extracts were obtained via ultrasonic-assisted extraction (UAE) and microwave-assisted extraction (MAE), and analyzed regarding their phytochemical (total phenolics, phenolic acids, flavonoids, and tannins) content and in vitro biological properties (antibacterial and antifungal activity, acetylcholinesterase AChE inhibitory activity and anti-inflammatory effects). The highest phenolic, tannin, and flavonoid contents were found for willow bark extracts obtained via microwave-assisted extraction using ethanol as a solvent (SA-ME). The polyphenol load of all MAE and UAE extracts was higher when conventional solid-liquid extraction was applied (ρ < 0.05). The antioxidant capacities were stronger for microwave-assisted ethanolic extracts, with the lowest IC50 values of 12 µg/mL for DPPH• and a value of 16 µg/mL for ABTS•+, whereas the conventional extraction had the highest IC50 values (22 µg/mL and 28 µg/mL, respectively). Willow bark extract showed antibacterial activity against Gram-positive bacteria S. aureus and P. aeruginosa. AChE inhibitory activity was dependent on the extraction method and solvent used, and the highest inhibition among samples was observed for SA-ME. Taken altogether, our findings suggest that willow (Salix alba) bark extract obtained via ethanolic microwave-assisted extraction is a phytochemical-rich resource with in vitro, anti-inflammatory, and AchE inhibitory properties and, therefore, potential multiple medicinal end-uses.

Spray-drying microencapsulation of blackcurrant and cocoa polyphenols using underexplored plant-based protein sources.

The performance of buckwheat protein (BK) and chia seed protein (CP) as drying carriers for the microencapsulation of polyphenols extracted from blackcurrant pomace and cocoa powder was investigated. Four experimental groups were evaluated (BK-BC: blackcurrant pomace extract with buckwheat protein; CP-BC: blackcurrant pomace extract with chia:pea protein blend; BK-CC: cocoa extract with buckwheat protein; and CP-CC: cocoa extract with chia:pea protein blend) to determine physicochemical attributes, phytochemical content, antioxidant activity, and polyphenol in vitro bioaccessibility. Nonconventional, underexploited protein sources such as chia/pea protein blend and buckwheat protein efficiently produced functional microparticles with attractive color and texture, low hygroscopicity (<20% increase in moisture content when exposed to 86% relative humidity for 1 week), solubility above 50% at pH 7 and 10, and uniform particle size (29 < D4,3  < 56 µm). Besides this, the protein-polyphenol microparticles concentrated and protected health-relevant polyphenol content. Anthocyanins were detected in blackcurrant treatments (around 20 mg cyanidin-3-O-glucoside equivalents/g), while proanthocyanidins (PAC) were the most prevalent polyphenols in cocoa treatments (>100 mg PAC B2/g). Monomers were the main class of PAC in both BK-CC and CP-CC treatments. All protein-polyphenol treatments reduced both reactive oxygen species and nitric oxide production in lipopolysaccharide-activated cells (p < 0.05). The polyphenol recovery index was high (>70%) for both oral and gastric phases, and BK-derived groups had better bioaccessibility index compared to BC or CC alone (noncomplexed). This research provided a framework for delivery of high-value ingredients to attend to an emerging market centered on protein-rich, clean label plant-based food products. PRACTICAL APPLICATION: Practical Application: The protein-polyphenol complexation is a robust method to produce phytochemical-rich food ingredients for the food industry with enhanced physicochemical, sensory, and bioaccessibility performance. In this study, we investigated practical aspects regarding the production and quality of protein-polyphenol particles, such as the spray-drying efficiency, phytochemical content, physicochemical attributes, antioxidant activity, and polyphenol bioaccessibility. This study unveils the potential of underexplored buckwheat and chia seeds (alone or combined with pea protein) as encapsulation carriers for fruit polyphenols to diversify the protein options available for products directed to the wellness market.

Total Utilization-Upcycling of Mushroom Protein By-Product: Characterization and Assessment as an Alternative Batter Ingredient for Fried Shrimp.

Mushroom by-products are economical and eco-friendly raw materials with bioactive and functional characteristics that allow for potential uses as food ingredients. However, mushroom upcycling has yet to be fully exploited, despite the many opportunities that mushrooms may offer. The mushroom protein by-product (MPBP) resulting from mushroom protein production was characterized (chemical composition, physicochemical attributes, and functional properties) and incorporated into plant-based batter formulations to prepare four experimental groups with different ratios (w/w, %) of wheat flour (W) to MPBP (100 W, 75 W/25 MPBP, 25 W/75 MPBP, and 100 MPBP). Subsequently, the batter was used for frying batter-coated shrimp, which was evaluated for cooking loss, coating pick-up, oil absorption, and color parameters (L*, a*, and b*). MPBP showed high content of dietary fiber, mainly insoluble fiber (49%), and it is potentially suited for the formulation of high-fiber food products. The MPBP physicochemical attributes pH (11.69), water activity (0.34), L* (58.56), a* (5.61), b* (18.03), and particle size distribution (250-500 µm (22.12%), 125-250 µm (41.18%), 63-125 µm (37.53%), and < 63 µm (0.82%) were noted. Concerning the MPBP functional characteristics, solubility (12.7%), emulsifying activity index (7.6 m2/gr), emulsion stability index (52.4 min), water holding capacity (4.9%), and oil holding capacity (4.8%) were reported. Adding MPBP into batter formulations for batter-coated shrimp resulted in higher values of cooking loss, oil absorption, coating pick-up, and a* color, while lowering L* and b* values. The best experimental results were reported for group 75 W/25 MPBP, which indicates that MPBP can potentially be accepted as a novel batter ingredient for partial substitution of wheat flour.

Novel Liquor-Based Hot Sauce: Physicochemical Attributes, Volatile Compounds, Sensory Evaluation, Consumer Perception, Emotions, and Purchase Intent.

Hot sauces are popular peppery condiments used to add flavor and sensory excitement to gastronomical preparations. While hot sauce occupies a retail category well over a century old, a novel production method using liquor as the base preservative rather than traditional vinegar is now commercially available, and its uniqueness begs study. Hot sauces produced with tequila, rum, vodka, and bourbon were compared to traditional vinegar-based hot sauces concerning physicochemical properties, volatile compounds, microbiological quality, sensory scores, emotions, and purchase intent (PI). Under accelerated conditions, pH, titratable acidity (TA), water activity (Aw), viscosity, and color were analyzed weekly for 20 weeks, whereas rheological properties, coliforms and yeasts and molds were examined on weeks 1 and 20. Hexyl n-valerate, butanoic acid, 3-methyl-, hexyl ester, and 4-methylpentyl 3-methylbutanoate were found in high concentrations in the pepper mix as well as the hot sauce produced with vinegar. When compared to vinegar-based hot sauces, liquor-based hot sauces had similar Aw (p > 0.05), higher pH, viscosity, and L* values and lower TA, a*, and b* values (p < 0.05). Samples formulated with liquors increased the relaxation exponent derived from G' values having a greater paste formation when compared to vinegar-based hot sauces. The sensory evaluation was carried out in Honduras. The liquor-based hot sauces had a significant (p < 0.05) impact on emotion and wellness terms. Bourbon and tequila samples had higher ratings than control samples in several wellness and emotion responses (active, energetic, enthusiastic, good, curious, pleased, stimulated, and wild). Adventurous, joyful, free, worried, refreshed, and healthy scores were not significantly (p > 0.05) different among treatments.

Sonoprocessing is an effective strategy to encapsulate fisetin into Saccharomyces cerevisiae cells.

The encapsulation of fisetin into S. cerevisiae cells through sonoporation coupled with drying is reported for the first time in the literature. To establish the best conditions to maximize the amount of internalized fisetin, the cell density (5-10% w/v), fisetin concentration (1-3 mg/mL), acoustic energy density (0-333.3 W/L), and drying method (freeze-drying and spray drying) were analyzed through a Box-Behnken experimental design (BBD) coupled with response surface methodology (RSM). Higher encapsulation efficiency (EE) was achieved with a cell density of 10% w/v, while fisetin concentration of 3 mg/mL favored the encapsulation yield (EY) and antioxidant activity (AA). Higher EE (67.7%), EY (25.7 mg/g), and AA (90%) were registered when an acoustic density of 333.3 W/L was used. Furthermore, both drying protocols promoted fisetin encapsulation, but through spray drying, the EE, EY, and AA were 11.5%, 11.1%, and 26.6% higher than via freeze-drying, respectively. This work proved that fully filled biocapsules were produced through sonoprocessing, and their morphology was influenced by the acoustic energy and drying process. Overall, these results open new perspectives for the application of sonoprocessing-assisted encapsulation, paving the way for developing innovative yeast-based delivery systems for lipophilic compounds such as fisetin. KEY POINTS: • Sonoprocessing improves the encapsulation of fisetin into S. cerevisiae cells • Spray drying promotes fisetin loading into yeasts' intracellular space and cavities • Fisetin binding with yeast extracellular agents are favored by freeze-drying.

Spray-dried and freeze-dried protein-spinach particles; effect of drying technique and protein type on the bioaccessibility of carotenoids, chlorophylls, and phenolics.

The effects of protein carrier and drying technique on the concentration and bioaccessibility of lipophilic compounds (lutein, ß-carotene, chlorophylls a and b) and hydrophilic flavonoids in freeze-dried (FD) or spray-dried (SD) spinach juice and protein-spinach particles were investigated. Carotenoid and chlorophyll contents were highest in FD spinach juice without protein (147 and 1355 mg/100 g, respectively). For both SD and FD protein-spinach particles, SPI best protected carotenoids and chlorophylls (123 and 1160 mg/g, respectively), although the bioaccessibility of lipophilic compounds in WPI particles was higher than SPI particles (p < 0.05). For flavonoids, the drying technique was more important than the type of carrier, since FD particles had higher total flavonoids than SD. However, SD particles had higher bioaccessibility for most flavonoids (40-90 %) compared to FD (<20 %). The drying method and protein carrier can be designed to produce protein-spinach ingredients with desired concentration of compounds and bioaccessibility.

Boosting the Bioaccessibility of Dietary Bioactives by Delivery as Protein-Polyphenol Aggregate Particles.

Protein-polyphenol aggregate particles concurrently fortify a functional food product with healthy dietary proteins and concentrated polyphenols. However, what impact does ingestion of aggregate particles have on ultimate health relevance of either the polyphenolic molecules in the matrix or the protein molecules? Because human health benefits are contingent on bioavailability after ingestion, the fate of these molecules during transit in the gastrointestinal tract (GIT) will dictate their utility as functional food ingredients. This brief review explores diverse applications of protein-polyphenol particles in the food industry and the bioaccessibility of both bioactive polyphenolic compounds and edible proteins. Evidence to date suggests that complexation of phytoactive polyphenolics effectively enhances their health-relevant impacts, specifically because the phytoactives are protected in the protein matrix during transit in the GIT, allowing intact, non-degraded molecules to reach the colon for catabolism at the gut microbiome level, a prerequisite to realize the health benefits of these active compounds.

Foaming characteristics and impact of ethanol pretreatment in drying behavior and physical characteristics for avocado pulp powder obtained by foam mat drying.

The objective of this study was to optimize the production of powdered avocado using foam mat drying. In order to achieve this, the effect of Emustab® (4, 6, and 8% w/w), goat's milk (10, 15, and 20% w/w), and whipping time (15, 20, and 25 min) on the foam physical properties of avocado pulp were evaluated. In addition, the influence of ethanol pretreatment on the drying kinetics, thermodynamic properties, and physicochemical characteristics of the powders was also assessed. An experimental design 23 with three central points was used in this study and optimized foam conditions were dried at 50, 60, and 70°C, with a fixed air speed of 1.5 m/s. Empirical and diffusive models (boundary conditions of the third type) were adjusted to the experimental data to describe the drying kinetics and to determine the process activation energy and thermodynamic properties. The final products were characterized regarding their physical properties. Optimized foam mat drying conditions were achieved when avocado pulp was whipped for 15 min and 8% of Emustab® and 20% of powdered goat milk were used as foaming agents. The use of an ethanol pretreatment and higher drying temperature (70°C) resulted in higher drying rate (1.6 × 102 /min) and shorter processing time (270 min). The ethanol pretreatment reduced the activation energy and Biot number and led to more uniform moisture distribution. The physical properties, such as water content, water activity, bulk, and tapped densities decreased with an increase in drying temperature and pretreatment with ethanol, whereas water absorption capacity increased. PRACTICAL APPLICATION: In this work, new information about the drying kinetics and mass transfer of the foam mat avocado pulp using ethanol as pretreatment is obtained. The results will contribute to the optimization production avocado foaming and powder. Ethanol pretreatment can represent an alternative to minimize the negative impacts on drying process and can be surely suggested as an industrial application.

Bioaccessibility and intestinal cell uptake of carotenoids and chlorophylls differ in powdered spinach by the ingredient form as measured using in vitro gastrointestinal digestion and anaerobic fecal fermentation models.

Insights into food matrix factors impacting bioavailability of bioactive carotenoids and chlorophylls from fruits and vegetable ingredients are essential to understanding their ability to promote health. The stability and bioaccessibility of carotenoids and chlorophylls were assessed from dehydrated, spray-dried, freeze-dried and fresh spinach ingredient forms using in vitro models simulating upper gastrointestinal (GI) digestion and lower GI anaerobic fecal fermentation. Intestinal transport of bioaccessible bioactives from both upper and lower GI compartments was assessed using the Caco-2 human intestinal cell model. Differences in carotenoid and chlorophyll contents were observed between ingredient forms and these influenced bioaccessibility. Lower carotenoid and chlorophyll contents in spray dried spinach resulted in the lowest total bioaccessible content among all spinach treatments (5.8 ± 0.2 µmoles per g DW carotenoid and chlorophyll). The total bioaccessible content was statistically similar between freeze-dried (12.5 ± 0.6 µmoles per g DW), dehydrated (12.5 ± 3.2 µmoles per g DW), and fresh spinach (14.2 ± 1.2 µmoles per g DW). Post anaerobic fermentation, cellular accumulation of carotenoids was higher (17.57-19.52 vs. 5.11-8.56%), while that of chlorophylls was lower (3.05-5.27 vs. 5.25-6.44%), compared to those observed following upper GI digestion. Collectively, these data suggest that spinach forms created by various drying technologies deliver similar levels of bioaccessible spinach bioactives and that the lower GI tract may serve as a site for significant absorption fostered by interactions with gut microbial communities that liberate additional bioactives from the spinach matrix.

Osmoporation is a versatile technique to encapsulate fisetin using the probiotic bacteria Lactobacillus acidophilus.

The objective of this study was to evaluate the performance of Lactobacillus acidophilus cells as a novel encapsulating carrier for fisetin via osmoporation. Initially, the effects of osmotic pressure and initial fisetin concentration on the performance of the osmoporation process were evaluated. The best results were achieved when 15 MPa was applied, while the maximum loading capacity was reached when fisetin concentration of 2.0 mg·mL-1 was used. For these conditions, the cell viability, encapsulation efficiency (EE), and encapsulated fisetin content (EF) were 72%, 28%, and 0.990 mg, respectively. Further, the encapsulation was confirmed by Fourier transform-infrared (FT-IR), differential scanning calorimetry (DSC), and X-ray diffraction (XRD) analysis. DSC thermograms revealed an increase of 40 °C in the melting point of fisetin after encapsulation. In addition, the enhancement of fisetin bioaccessibility by osmoporated biocapsules is shown for the first time in the literature. When the fisetin biocapsules were subjected to in vitro gastrointestinal digestion, 99.6% of the encapsulated content were retained through the gastric stage and 45.5% were released during the intestinal stage, despite no active cells were detected during simulated digestion. These results suggest that alive cells are required for an effective osmoporation-assisted encapsulation process; however, osmoporated biocapsules can efficiently protect and preserve labile compounds, independently of their activity. Overall, this study demonstrated that osmoporation using probiotic L. acidophilus is a simple, versatile, and efficient technique to encapsulate and deliver lipophilic fisetin for food applications. KEY POINTS : •Fisetin is efficiently encapsulated into L. acidophilus via osmoporation. •Fisetin bioaccessibility is improved by osmoporation into L. acidophilus. •Release mechanisms of osmoporation carriers are independent of the cell activity.

Novel Spray Dried Algae-Rosemary Particles Attenuate Pollution-Induced Skin Damage.

The present study investigated the effect of spray-dried algae-rosemary particles against pollution-induced damage using ex-vivo human biopsies exposed to diesel engine exhaust (DEE). For this, the complexation of hydroalcoholic rosemary extract with Chlorella (RCH) and Spirulina (RSP) protein powders was conducted. The process efficiency and concentration of rosmarinic acid (RA), carnosic acid (CA), and carnosol (CR) phenolic compounds of both products were compared. The RSP spray-dried production was more efficient, and RSP particles presented higher CR and CA and similar RA concentrations. Therefore, spray-dried RSP particles were prioritized for the preparation of a gel formulation that was investigated for its ability to mitigate pollution-induced skin oxinflammatory responses. Taken altogether, our ex-vivo data clearly demonstrated the ability of RSP gel to prevent an oxinflammatory phenomenon in cutaneous tissue by decreasing the levels of 4-hydroxynonenal protein adducts (4HNE-PA) and active matrix metalloproteinase-9 (MMP-9) as well as by limiting the loss of filaggrin induced by DEE exposure. Our results suggest that the topical application of spirulina-rosemary gel is a good approach to prevent pollution-induced skin aging/damage.

Efficient stabilisation of curcumin microencapsulated into yeast cells via osmoporation.

This study proposes the investigation of curcumin encapsulation into Saccharomyces cerevisiae cells through osmoporation as an efficient way of increasing curcumin stability. The influence of three process parameters (cell, ethanol and curcumin concentrations) on the encapsulation process was evaluated, and the obtained biocapsules were characterised for physical and photochemical stabilisation. Results showed that encapsulation efficiency was favoured by the increase of cells/curcumin ratio and ethanol concentration up to 60%. Differential scanning calorimetry (DSC) curves revealed that yeast encapsulation delayed the curcumin melting point up to 207 °C. Encapsulated curcumin retained over 80% of antioxidant activity after thermal treatment (150 °C) and over 70% after a 50-day exposure to artificial light. Photochemical stability of yeast-encapsulated curcumin was increased by 5.7-fold, and half-life time reached 181 days under illumination conditions. Overall, osmoporation-produced yeast biocapsules confirmed the versatility of osmoporation as an encapsulation technique and successfully improved curcumin stability.

Comparison of berry juice concentrates and pomaces and alternative plant proteins to produce spray dried protein-polyphenol food ingredients.

Spray dried functional food ingredients were prepared by complexing alternative plant protein sources - buckwheat flour alone or blended with pea and rice proteins, with polyphenol sources - blueberry, cranberry and purple muscadine grape extracts from juice concentrates and pomaces - to create colloidal aggregate powders. When fruit pomaces (rather than juice concentrates) were used as polyphenol resources, solid recovery was significantly enhanced, especially for matrices made with pea protein, buckwheat flour or pea-buckwheat blends (over two fold for pea protein-berry pomace aggregates). Polyphenol content and DPPH radical scavenging capacity were, in general, significantly greater for pomace-derived protein-polyphenol aggregates compared to those made with juice concentrates. In particular, the particles produced with muscadine grape pomace presented the highest (p < 0.05) phenolic content (147.3-174.3 mg g-1, 19.4-20.4 mg g-1 and 16.3-21.4 mg g-1 for total phenolic content, anthocyanins and proanthocyanidins respectively), and antioxidant activity (408.9-423.3 µmol TE per g) as well as good spray drying yield (38.6-63.4%). Buckwheat flour, despite its relatively low protein content (13.7%) relative to pea and rice protein isolates (84% and 89%, respectively) still demonstrated high capacity for sorption of flavonoid phytoactive compounds from the berry fruits. These results suggest an efficient plant-based approach to produce value-added protein-polyphenol aggregates with broad utility as healthy food ingredients.

Blueberry polyphenol-protein food ingredients: The impact of spray drying on the in vitro antioxidant activity, anti-inflammatory markers, glucose metabolism and fibroblast migration.

Wild blueberry pomace extract complexed with wheat or chickpea flour or soy protein isolate produced spray dried and freeze-dried polyphenol-protein particles. To evaluate the impact of spray drying on the biological activity of these food ingredients in vitro antioxidant and anti-inflammatory activities, regulation of glucose metabolism and ability to stimulate fibroblast migration were tested. Extracts from polyphenol-protein particles significantly decreased reactive oxygen species (ROS) production and down-regulated the gene expression of inflammation markers (COX-2 and IL-1ß). Milder suppression of nitric oxide production and inducible nitric oxide synthase (iNOS) gene expression was evident. The extracts significantly inhibited phosphoenolpyruvate carboxykinase (PEPCK) and accelerated fibroblast cell migration up to 3-fold after 24 h. Complexed polyphenols retained their structural integrity and bioactive potency for both lyophilized and spray dried treatments. The data suggests that spray drying is a convenient and cost-effective technique to produce blueberry-polyphenol food ingredients with preserved phytochemicals with biological activities.