In Situ Vanadium-Deficient Engineering of V2 C MXene: A Pathway to Enhanced Zinc-Ion Batteries.

This research examines vanadium-deficient V2 C MXene, a two-dimensional (2D) vanadium carbide with exceptional electrochemical properties for rechargeable zinc-ion batteries. Through a meticulous etching process, a V-deficient, porous architecture with an expansive surface area is achieved, fostering three-dimensional (3D) diffusion channels and boosting zinc ion storage. Analytical techniques like scanning electron microscopy, transmission electron microscopy, Brunauer-Emmett-Teller, and X-ray diffraction confirm the formation of V2 C MXene and its defective porous structure. X-ray photoelectron spectroscopy further verifies its transformation from the MAX phase to MXene, noting an increase in V3+ and V4+ states with etching. Cyclic voltammetry reveals superior de-zincation kinetics, evidenced by consistent V3+ /V4+ oxidation peaks at varied scanning rates. Overall, this V-deficient MXene outperforms raw MXenes in capacity and rate, although its capacity diminishes over extended cycling due to structural flaws. Theoretical analyses suggest conductivity rises with vacancies, enhancing 3D ionic diffusion as vacancy size grows. This work sheds light on enhancing V-based MXene structures for optimized zinc-ion storage.

One-Step Electrochemical Synthesis of AlO x -Passivated Twisted-Phosphorene Nanosheets for Potentially Stable Energy Storage Devices.

Black phosphorus (BP), a promising 2D material for electronics, energy storage, catalysis, and sensing, has sparked a research boom. However, exfoliated thin-layered BP is unstable and can easily be degraded under environmental conditions, severely limiting its practical applications. In this context, a simple and cost-effective method has been proposed that involves electrochemically exfoliating BP and simultaneously electrochemically depositing aluminum oxide (AlO x ) for passivation of the exfoliated BP. The ambient stability of the exfoliated BP is studied using a time-dependent atomic force microscope (AFM). The AlO x capping layer significantly improves the environmental stability of BP compared to uncapped BP. The thermal stability of the resulting BP is evaluated using power-dependent Raman spectroscopy. The results show that the AlO x -passivated BP has increased thermal stability, with only a slight shift in peak position toward higher Raman power intensity. These properties can make the material suitable for stable energy storage devices. Interestingly, the electrochemical exfoliation and passivation processes resulted in the BP with a twist angle (9.86°), which is expected to exhibit unique electronic properties similar to those of graphene with a twist angle.

Functionalized Metallic 2D Transition Metal Dichalcogenide-Based Solid-State Electrolyte for Flexible All-Solid-State Supercapacitors.

Highly efficient and durable flexible solid-state supercapacitors (FSSSCs) are emerging as low-cost devices for portable and wearable electronics due to the elimination of leakage of toxic/corrosive liquid electrolytes and their capability to withstand elevated mechanical stresses. Nevertheless, the spread of FSSSCs requires the development of durable and highly conductive solid-state electrolytes, whose electrochemical characteristics must be competitive with those of traditional liquid electrolytes. Here, we propose an innovative composite solid-state electrolyte prepared by incorporating metallic two-dimensional group-5 transition metal dichalcogenides, namely, liquid-phase exfoliated functionalized niobium disulfide (f-NbS2) nanoflakes, into a sulfonated poly(ether ether ketone) (SPEEK) polymeric matrix. The terminal sulfonate groups in f-NbS2 nanoflakes interact with the sulfonic acid groups of SPEEK by forming a robust hydrogen bonding network. Consequently, the composite solid-state electrolyte is mechanically/dimensionally stable even at a degree of sulfonation of SPEEK as high as 70.2%. At this degree of sulfonation, the mechanical strength is 38.3 MPa, and thanks to an efficient proton transport through the Grotthuss mechanism, the proton conductivity is as high as 94.4 mS cm-1 at room temperature. To elucidate the importance of the interaction between the electrode materials (including active materials and binders) and the solid-state electrolyte, solid-state supercapacitors were produced using SPEEK and poly(vinylidene fluoride) as proton conducting and nonconducting binders, respectively. The use of our solid-state electrolyte in combination with proton-conducting SPEEK binder and carbonaceous electrode materials (mixture of activated carbon, single/few-layer graphene, and carbon black) results in a solid-state supercapacitor with a specific capacitance of 116 F g-1 at 0.02 A g-1, optimal rate capability (76 F g-1 at 10 A g-1), and electrochemical stability during galvanostatic charge/discharge cycling and folding/bending stresses.

High-Entropy NASICON Phosphates (Na3M2(PO4)3 and NaMPO4Ox, M = Ti, V, Mn, Cr, and Zr) for Sodium Electrochemistry.

High-entropy materials, with complex compositions and unique cocktail characteristics, have recently drawn significant attention. Additionally, a family of sodium super ion conductors (NASICONs)-structured phosphates in energy storage areas shows a comprehensive application for traditional alkaline ion batteries and, in particular, solid-state electrolytes. However, there is no precedent in fabricating this kind of NASICON-type high-entropy phase. Here, we report the successful fabrication of two well-crystallized high-entropy phosphates, namely, Na3(Ti0.2V0.2Mn0.2Cr0.2Zr0.2)2(PO4)3 (HE-N3M2P3) and Na(Ti0.2V0.2Mn0.2Cr0.2Zr0.2)2PO4Ox (HE-NMP). The prepared materials in which the transition metals (TMs) of Ti, V, Mn, Cr, and Zr occupy the same 12c Wykoff position can form a structure analogous to R3̅c Na3V2(PO4)3 that is carefully determined by X-ray diffraction, neutron diffraction, and transmission electron microscopy. Further, their performance for sodium ion batteries and sodium-based solid-state electrolytes was evaluated. The HE-N3M2P3 might exhibit a promising electrochemical performance for sodium storage in terms of its structure resembling that of Na3V2(PO4)3. Meanwhile, the HE-NMP shows considerable electrochemical activity with numerous broad redox ranges during extraction and insertion of Na+, related to the coexistence of several TM elements. The evaluated temperature-dependent ionic conductivity for HE-NMP solid electrolyte varies from 10-6 to 10-5 S cm-1 from room temperature to 398.15 K, offering high potential for energy storage applications as a new high-entropy system.

Puzzle-inspired carbon dots coupled with cobalt phosphide for constructing a highly-effective overall water splitting interface.

Inspired by the structure of puzzles, bombyx mori silk-derived carbon dots (CDs) with abundant negative groups, as jigsaw pieces, were combined with nano-CoP to create a highly effective electrocatalytic interface. The hollow cavity and thin wall of the bamboo-like CDs/CoP nanoarray is beneficial to produce more H˙ radicals and accelerate water decomposition.

A coaxial nanocable textured by a cerium oxide shell and carbon core for sensing nitric oxide.

A corn-like CeO2/C coaxial cable textured by a cerium oxide shell and a carbon core was designed to sense NO. The carbon core possesses high electrical conductivity, and the CeO2 surface delivers excellent electrocatalytic activity. The sensor, typically operated at 0.8 V (vs. Ag/AgCl), exhibits a detection limit of 1.7 nM, which is 4-times lower than that of CeO2 nanotubes based one (at S/N = 3). It also displays wide linear response (up to 83 µM), a sensitivity of 0.81 µA µM-1 cm-2, and fast response (2 s). These values are highly competitive to that of a CeO2 tube (0.92 µA µM-1 cm-2 and 2 s). The sensor was used to quantify NO that is released by Aspergillus flavus. Graphical abstractSchematic representation of corn-like CeO2/C which can more sensitively and effectively detect NO released from A. flavus than when using CeO2 nanotubes, benefitting from its unique coaxial cable structure.