Mixed-culture biocathodes for acetate production from CO2 reduction in the microbial electrosynthesis: Impact of temperature.

The temperature effect on bioelectrochemical reduction of CO2 to acetate with a mixed-culture biocathode in the microbial electrosynthesis was explored. The results showed that maximum acetate amount of 525.84 ± 1.55 mg L-1 and fastest acetate formation of 49.21 ± 0.49 mg L-1 d-1 were obtained under mesophilic conditions. Electron recovery efficiency for CO2 reduction to acetate ranged from 14.50 ± 2.20% to 64.86 ± 2.20%, due to propionate, butyrate and H2 generation. Mesophilic conditions were demonstrated to be more favorable for biofilm formation on the cathode, resulting in a stable and dense biofilm. At phylum level, the relative abundance of Bacteroidetes phylum in the biofilm remarkably increased under mesophilic conditions, compared with that at psychrophilic and thermophilic conditions. At genus level, the Clostridium, Treponema, Acidithiobacillus, Acetobacterium and Acetoanaerobium were found to be dominated genera in the biofilm under mesophilic conditions, while genera diversity decreased under psychrophilic and thermophilic conditions.

Ammonia sensing by closely packed WO3 microspheres with oxygen vacancies.

Ammonia (NH3), is a precursor for the formation of atmospheric fine particulate matter (PM2.5), and thus establishing efficient and cost-effective methods to detect ammonia emission is highly desired. Transition metal oxide semiconductors-based sensors for electrochemical gas sensing have been extensively explored. Among various types of semiconductors, tungsten oxide (WO3) possesses an anisotropic layered crystalline structure and is recognized as a promising material for gas sensing. However, the performance of commercial WO3 is unsatisfactory because of its high impedance and low charge transportation efficiency. Thus, the modification of commercial WO3 is needed to make it an efficient ammonia sensor material. In this work, closely packed WO3 microspheres with oxygen vacancies were synthesized successfully through a novel two-step hydrothermal route. Our WO3 showed a good selectivity to ammonia sensing, and its response intensity was 2.6 times higher than that of commercial WO3 because of its optimized conductivity. Moreover, the mechanism behind its robust ammonia sensing performance was elucidated. The effectiveness of the as-prepared WO3 microspheres for ammonia sensing also suggests a new strategy for modifying transition metal oxide materials.