RESUMO
Icing has been seen as an economic and safety hazard due to its threats to aviation, power generation, offshore platforms, etc., where passive icephobic surfaces with a surface texturing design have the potential to address this problem. However, the intrinsic icephobic principles associated with the surface textures, energy, elasticity, and hybrid effects are still unclear. To explore the anisotropic wettability, ice nucleation, and ice detaching behaviors, a series of textured poly(dimethylsiloxane) (PDMS)-based coatings with various texture orientations were proposed through a simple stamping method with surface functionalization. The anisotropic hydrophobic/icephobic phenomena and mechanisms were discovered from wettability evaluation, experimentally studied by icing/deicing experiments, and finally verified by microscopic numerical simulations. One-way analysis of variance (one-way ANOVA analysis) was used to analyze the effect of surface textures on hydrophobic/icephobic properties, which assisted in understanding anisotropic phenomena. Typical anisotropic ice nucleation and growth on the textured coatings were clarified using in situ environmental scanning electron microscope (ESEM) characterization. The ice/coating interfacial stress responses were studied by numerical stimulation at the microscopic level, further verifying the localized, amplified, and propagated stress at the ice/coating interface. The theoretical anisotropic responses, barrier effect, and accelerating effect were verified to interpret the anisotropic wettability and icephobicity, depending on the specific surface conditions. This study revealed the basics of the anisotropic icephobic mechanisms of textured icephobic surfaces, further facilitating the R&D of passive icephobic surfaces.
RESUMO
HYPOTHESIS: Ice mitigation has received increasing attention due to the severe safety and economic threats of icing hazards to modern industries. Slippery icephobic surface is a potential ice mitigation approach due to its ultra-low ice adhesion strength, great humidity resistance, and effective delay of ice nucleation. However, this approach currently has limited practical applications because of serious liquid depletion in the icing/de-icing process. EXPERIMENTS: A new strategy of phase change materials (PCM)-impregnation porous metallic structures (PIPMSs) was proposed to develop phase changeable icephobic surfaces in this study, and aimed to solve the rapid depletion via the phase changeable interfacial interactions. FINDINGS: Evaluation of surface icephobicity and interfacial analysis proved that the phase changeable surfaces (PIPMSs) worked as an effective and durable icephobic platform by significantly delaying ice nucleation, providing long-term humid tolerance, low ice adhesion strength of as-prepared samples (less than 5 kPa), and signally improved maintaining capacity of impregnated PCMs (less than 10 % depletion) after 50 icing/de-icing cycles. To explore the interfacial responses, phase change models consisting of the unfrozen quasi-liquid layer and solid lubricant layer at the ice/PIPMSs interfaces were established, and the involved icephobic mechanisms of PIPMSs were studied based on the analysis of interfacial interactions.
RESUMO
Moisture condensation, fogging, and frost or ice formation on structural surfaces cause severe hazards in many industrial components such as aircraft wings, electric power lines, and wind-turbine blades. Surface-acoustic-wave (SAW) technology, which is based on generating and monitoring acoustic waves propagating along structural surfaces, is one of the most promising techniques for monitoring, predicting, and also eliminating these hazards occurring on these surfaces in a cold environment. Monitoring condensation and frost/ice formation using SAW devices is challenging in practical scenarios including sleet, snow, cold rain, strong wind, and low pressure, and such a detection in various ambient conditions can be complex and requires consideration of various key influencing factors. Herein, the influences of various individual factors such as temperature, humidity, and water vapor pressure, as well as combined or multienvironmental dynamic factors, are investigated, all of which lead to either adsorption of water molecules, condensation, and/or frost/ice in a cold environment on the SAW devices. The influences of these parameters on the frequency shifts of the resonant SAW devices are systematically analyzed. Complemented with experimental studies and data from the literature, relationships among the frequency shifts and changes of temperature and other key factors influencing the dynamic phase transitions of water vapor on SAW devices are investigated to provide important guidance for icing detection and monitoring.
RESUMO
Ice protection techniques have attracted significant interest, notably in aerospace and wind energy applications. However, the current solutions are mostly costly and inconvenient due to energy-intensive and environmental concerns. One of the appealing strategies is the use of passive icephobicity, in the form of coatings, which is induced by means of several material strategies, such as hydrophobicity, surface texturing, surface elasticity, and the physical infusion of ice-depressing liquids, etc. In this review, surface-roughness-related icephobicity is critically discussed to understand the challenges and the role of roughness, especially on superhydrophobic surfaces. Surface roughness as an intrinsic, independent surface property for anti-icing and de-icing performance is also debated, and their interdependence is explained using the related physical mechanisms and thermodynamics of ice nucleation. Furthermore, the role of surface roughness in the case of elastomeric or low-modulus polymeric coatings, which typically instigate an easy release of ice, is examined. In addition to material-centric approaches, the influence of surface roughness in de-icing evaluation is also explored, and a comparative assessment is conducted to understand the testing sensitivity to various surface characteristics. This review exemplifies that surface roughness plays a crucial role in incorporating and maintaining icephobic performance and is intrinsically interlinked with other surface-induced icephobicity strategies, including superhydrophobicity and elastomeric surfaces. Furthermore, the de-icing evaluation methods also appear to be roughness sensitive in a certain range, indicating a dominant role of mechanically interlocked ice.
RESUMO
HYPOTHESIS: Ice accretion on component surfaces often causes severe impacts or accidents. Liquid-infused surfaces (LIS) have drawn much attention as icephobic materials for ice mitigation in recent years due to their outstanding icephobicity. However, the durability of LIS constructions remains a big challenge, including mechanical vulnerability and rapid depletion of lubricants. The practical applications of LIS materials are significantly restrained, and the full potential of LIS for ice prevention has yet to be demonstrated. EXPERIMENTS: A universal approach was proposed to introduce microporous metallic scaffolds in the LIS construction to increase the applicability and durability, and to prompt the potential of LIS for ice mitigation. Microporous Ni scaffolds were chosen to integrate with polydimethylsiloxane modified by silicone oil addition. FINDINGS: The new LIS construction demonstrated significantly improved durability in icing/de-icing cyclic test, and it also offered a solution for the rapid oil depletion by restraining the deformation of the matrix material. Low ice adhesion strength could be maintained via a micro-crack initiation mechanism. The results indicated that the multi-phase LIS construction consisting of microporous Ni scaffolds effectively addressed the shackles of the icephobicity deterioration of LIS materials, confirming a new design strategy for the R&D of icephobic surfaces.
RESUMO
"New Insights in Wettability and Surface Repellency of Advanced Materials" is a new Special Issue of Materials, which commits to publishing original and review papers on the recent progress of wettability and surface repellency of materials, including new findings and understanding of surface repellent materials and related theory, design, fabrication, characterization, and applications [...].
RESUMO
Ice accretion on economically valuable and strategically important surfaces poses significant challenges. Current anti-/de-icing techniques often have critical issues regarding their efficiency, convenience, long-term stability, or sustainability. As an emerging ice mitigation strategy, the thin-film surface acoustic wave (SAW) has great potentials due to its high energy efficiency and effective integration on structural surfaces. However, anti-/de-icing processes activated by SAWs involve complex interfacial evolution and phase changes, and it is crucial to understand the nature of dynamic solid-liquid-vapor phase changes and ice nucleation, growth, and melting events under SAW agitation. In this study, we systematically investigated the accretion and removal of porous rime ice from structural surfaces activated by SAWs. We found that icing and de-icing processes are strongly linked with the dynamical interfacial phase and structure changes of rime ice under SAW activation and the acousto-thermally induced localized heating that facilitate the melting of ice crystals. Subsequently, interactions of SAWs with the formed thin water layer at the ice/structure interface result in significant streaming effects that lead to further damage and melting of ice, liquid pumping, jetting, or nebulization.
RESUMO
In this study, graphene oxide-carbon nanotubes nanostructures decorated with nickel nanoparticles (NiGNT) were prepared through the molecular-level-mixing method, followed by a reduction process, and then applied as reinforcements to enhance the epoxy resin matrix. The ferromagnetism of the Ni nanoparticles allowed NiGNT nanostructures to be vertically aligned within the composite with the assistance of a magnetic field. Due to the alignment distribution of the NiGNT, the composites demonstrated enhanced anisotropic thermal and electrical conduction performances, compared with pure epoxy and randomly distributed composites. The aligned distribution of NiGNT-epoxy composites displayed 2.7 times higher thermal conductivity and around 104 times better electrical conduction performance, compared with pure epoxy. The thermal expansion of NiGNT-epoxy composite was also restricted in the aligned direction of NiGNT nanostructures. Thus, NiGNT-epoxy composites show great potential as future aerospace, aviation, and automobile materials.
RESUMO
Carbon fiber composites composed of carbon fiber and pyrolytic carbon (PyC) matrix have great potential application in the brakes of aircrafts, where the combination of high mechanical strength and excellent frictional properties are required. In this work, two-component silicon-based interlocking enhancements were designed and constructed into carbon fiber composites for boosting the mechanical and frictional properties. Specially, silicon carbide nanowires (SiCnws) and silicon nitride nanobelts (Si3N4nbs) could form interlocking architectures, where SiCnws are rooted firmly on the carbon fiber surface in the radial direction and Si3N4nbs integrate the PyC matrix with carbon fibers together via a networked shape. SiCnws-Si3N4nbs not only refine the PyC matrix but also promote the bonding of the fiber/matrix interface and the cohesion strength of the PyC matrix, thus enhancing the mechanical and frictional properties. Benefiting from the SiCnws-Si3N4nbs synergistic effect and interlocking enhancement mechanism, the interlaminar shear strength and compressive strength of carbon fiber composites increased by 88.41% and 73.40%, respectively. In addition, the friction coefficient and wear rate of carbon fiber composites decreased by 39.50% and 69.88%, respectively. This work could open up an interlocking enhancement strategy for efficiently fabricating carbon fiber composites and promoting mechanical and frictional properties that could be used in the brakes of aircrafts.
RESUMO
HYPOTHESIS: The accretion of ice on component surfaces often causes severe impacts or accidents in modern industries. Applying icephobic surface is considered as an effective solution to minimise the hazards. However, the durability of the current icephobic surface and coatings for long-term service remains a great challenge. Therefore, it is indeed to develop new durable material structures with great icephobic performance. EXPERIMENTS: A new design concept of combining robust porous metallic skeletons and icephobic filling was proposed. Nickel/polydimethylsiloxane (PDMS) two-phase layer was prepared using porous Ni foam skeletons impregnated with PDMS as filling material by a two-step method. FINDINGS: Good icephobicity and mechanical durability have been verified. Under external force, micro-cracks could easily initiate at the ice/solid interface due to the small surface cavities and the difference of local elastic modulus between the ice and PDMS, which would promote the ice fracture and thus lead to low ice adhesion strength. The surface morphology and icephobicity almost remain unchanged after water-sand erosion, showing greatly improved mechanical durability. By combining the advantages of the mechanical durability of porous Ni skeleton and the icephobicity of PDMS matrix, the Ni foam/PDMS two-phase layer demonstrates great potentials for ice protection with long-term service time.
RESUMO
In this work, a CuCe alloy was prepared using a directional solidification method at a series of withdrawal rates of 100, 25, 10, 8, and 5 µm/s. We found that the primary phase microstructure transforms from cellular crystals to cellular peritectic coupled growth and eventually, changes into dendrites as the withdrawal rate increases. The phase constituents in the directionally solidified samples were confirmed to be Cu2Ce, CuCe, and CuCe + Ce eutectics. The primary dendrite spacing was significantly refined with an increasing withdrawal rate, resulting in higher compressive strength and strain. Moreover, the cellular peritectic coupled growth at 10 µm/s further strengthened the alloy, with its compressive property reaching the maximum value of 266 MPa. Directional solidification was proven to be an impactful method to enhance the mechanical properties and produce well-aligned in situ composites in peritectic systems.
RESUMO
The study of electron delocalisation in oxygen atom segregated zones in graphene, aided by the first-principles density functional theory, has revealed extra energy bands of ≥2 eV wide around the Fermi level, predicting Faradaic charge storage occurring in a wide range of potentials, which disagrees with Nernst's law but accounts well for the so called pseudocapacitance of heteroatom-modified graphene based electrode materials in supercapacitors.
RESUMO
A super-hydrophobic surface has been obtained from nanocomposite materials based on silica nanoparticles and self-assembled monolayers of 1H,1H,2H,2H-perfluorooctyltriethoxysilane (POTS) using spin coating and chemical vapor deposition methods. Scanning electron microscope images reveal the porous structure of the silica nanoparticles, which can trap small-scale air pockets. An average water contact angle of 163° and bouncing off of incoming water droplets suggest that a super-hydrophobic surface has been obtained based on the silica nanoparticles and POTS coating. The monitored water droplet icing test results show that icing is significantly delayed by silica-based nano-coatings compared with bare substrates and commercial icephobic products. Ice adhesion test results show that the ice adhesion strength is reduced remarkably by silica-based nano-coatings. The bouncing phenomenon of water droplets, the icing delay performance and the lower ice adhesion strength suggest that the super-hydrophobic coatings based on a combination of silica and POTS also show icephobicity. An erosion test rig based on pressurized pneumatic water impinging impact was used to evaluate the durability of the super-hydrophobic/icephobic coatings. The results show that durable coatings have been obtained, although improvement will be needed in future work aiming for applications in aerospace.
RESUMO
A quantitative characteristic method was proposed for characterizing the matrix texture of carbon/carbon(C/C) composites, which determined the mechanical and physical properties of C/C composites. Based on the cloud theory that was commonly used for uncertain reasoning and the transformation between quantitative and qualitative characterization, so the relationship between the extinction angle and texture types was built by the cloud models for describing the texture of microstructure, moreover, linguistic controllers were established to analyze the matrix texture in accordance with the features of the polarized light microscope (PLM) image. On this basis, the extinction angle could be calculated from the PLM image of the C/C composites. In contrast to the results of measurement, the errors between calculative values and measured values were maintained 1-2° in basically. Meanwhile, the PLM image of C/C composites was segmented by the component, in particular, the matrix with mixed textures was further segmented by the difference of texture. It means that the quantitative characterization of C/C composites matrix based on single PLM image has been realized.
RESUMO
Tribological performance of the hot-pressed pure Al2O3 and its composites containing various hybrid contents of graphene nanoplatelets (GNPs) and carbon nanotubes (CNTs) were investigated under different loading conditions using the ball-on-disc method. Benchmarked against the pure Al2O3, the composite reinforced with a 0.5 wt% GNP exhibited a 23% reduction in the friction coefficient along with a promising 70% wear rate reduction, and a hybrid reinforcement consisting of 0.3 wt.% GNPs + 1 wt.% CNTs resulted in even better performance, with a 86% reduction in the wear rate. The extent of damage to the reinforcement phases caused during wear was studied using Raman spectroscopy. The wear mechanisms for the composites were analysed based on the mechanical properties, brittleness index and microstructural characterizations. The excellent coordination between GNPs and CNTs contributed to the excellent wear resistance property in the hybrid GNT-reinforced composites. GNPs played the important role in the formation of a tribofilm on the worn surface by exfoliation; whereas CNTs contributed to the improvement in fracture toughness and prevented the grains from being pulled out during the tribological test.
RESUMO
Transparent conducting oxide (TCO) films have the remarkable combination of high electrical conductivity and optical transparency. There is always a strong motivation to produce TCO films with good performance at low cost. Electrostatic Spray Assisted Vapor Deposition (ESAVD), as a variant of chemical vapour deposition (CVD), is a non-vacuum and low-cost deposition method. Several types of TCO films have been deposited using ESAVD process, including indium tin oxide (ITO), antimony-doped tin oxide (ATO), and fluorine doped tin oxide (FTO). This paper reports the electrical and optical properties of TCO films produced by ESAVD methods, as well as the effects of post treatment by plasma hydrogenation on these TCO films. The possible mechanisms involved during plasma hydrogenation of TCO films are also discussed. Reduction and etching effect during plasma hydrogenation are the most important factors which determine the optical and electrical performance of TCO films.
RESUMO
Bilayer and multilayer thin films are becoming increasingly important in the development of faster, smaller and more efficient electronic and optoelectronic devices. One of the motivations of applying bilayer or multilayer structures is to modify the optical properties of materials. Atomic layer deposition (ALD) is a variant of Chemical Vapour Deposition that can produce uniform and conformal thin films with well controlled nanostructures. In this study, we have demonstrated new findings of the use of ALD fabricated bilayer TiO2/ZnO thin films with enhanced crystallinity and optical properties. TiO2 films have been deposited at 300 degrees C for 1000 (51 nm in thickness) or 3000 (161 nm in thickness) deposition cycles onto glass and Si substrates. ZnO films are subsequently deposited on the TiO2 layers at 280 degrees C for 500 deposition cycles (55 nm). The crystallinity and optical properties of the TiO2/ZnO thin films have been analysed by X-ray diffraction, photoluminescence, UV-Vis spectroscopy, Atomic Force Microscopy and Scanning Electron Microscopy. XRD diffraction pattern confirmed the presence of ZnO with wutrtize crystal structure and TiO2 with anatase structure. It shows that the crystallinity of the TiO2 films has been improved with the deposition of ZnO. The intensity of UV luminescence has increased by almost 30% for TiO2/ZnO bilayer as compared to the single layer TiO2. The possible mechanism for the enhancement of the optical properties of bilayer TiO2/ZnO thin films will be discussed.
RESUMO
An in situ doping approach of producing Al-doped ZnO NWs was demonstrated using an aerosol-assisted chemical vapour deposition (AA-CVD) technique. In this technique, Zn precursor was kept in the middle of a horizontal tube furnace whereas the dopant solution was kept in an aerosol generator, which was located outside the furnace. The Al aerosol was flowed into the reactor during the growth of NWs in order to achieve in situ doping. Al-doped ZnO NWs were synthesized as verified by the combination of XRD, TEM/EDS and TOF-SIMS analysis. Highly (00.2) oriented ZnO seed layers were used to promote vertically aligned growth of Al-doped ZnO NWs. Lastly, a growth mechanism of vertically aligned Al-doped ZnO NWs was discussed.
RESUMO
Preferred orientation of ZnO thin films deposited by the atomic layer deposition (ALD) technique could be manipulated by deposition temperature. In this work, diethyl zinc (DEZn) and deionized water (H(2)O) were used as a zinc source and oxygen source, respectively. The results demonstrated that (10.0) dominant ZnO thin films were grown in the temperature range of 155-220 °C. The c-axis crystal growth of these films was greatly suppressed. Adhesion of anions (such as fragments of an ethyl group) on the (00.2) polar surface of the ZnO thin film was believed to be responsible for this suppression. In contrast, (00.2) dominant ZnO thin films were obtained between 220 and 300 °C. The preferred orientations of (10.0) and (00.2) of the ZnO thin films were examined by XRD texture analysis. The texture analysis results agreed well with the alignments of ZnO nanowires (NWs) which were grown from these ZnO thin films. In this case, the nanosized crystals of ZnO thin films acted as seeds for the growth of ZnO nanowires (NWs) by chemical vapor deposition (CVD) process. The highly (00.2) textured ZnO thin films deposited at high temperatures, such as 280 °C, contained polycrystals with the c axis perpendicular to the substrate surface and provided a good template for the growth of vertically aligned ZnO NWs.