Beyond the Drinking Water Directive: The use of reporter gene assays as an added tool for effect-based monitoring of polycyclic aromatic hydrocarbons and polychlorinated biphenyls in drinking water sources.

Polycyclic aromatic hydrocarbons (PAHs) and polychlorinated biphenyls (PCBs) are legacy organic micropollutants (OMPs) that are sporadically detected in drinking water (DW) sources. The European Drinking Water Directive requires EU member states to monitor 5 PAHs in DW and its sources. The Dutch national regulations require 6 additional PAHs to be monitored and 7 polychlorinated biphenyls (PCBs). These indicator compounds act as representatives for large compound classes. PCBs alone comprise 209 congeners, it is evident that conventional chemical target analysis (GC-tQ-MS) alone is not sufficient to monitor these entire compound classes. This study investigated the application of reporter gene assays as effect-based methods (EBMs) to monitor PAHs and PCBs in DW sources. Herein, it was assessed what added value the bioassays can bring compared to the current approach of chemical target analysis for PCBs and PAHs. Regulated and non-regulated PAHs and PCBs were tested in four bioassays to determine the relative potency factors (RPFs) for these compounds. Non-regulated congeners were found to be active in the PAH-CALUX and anti-AR CALUX. An assessment of surface water (SW) spiked with standard mixtures containing PAHs and PCBs confirmed the predictable behavior of the PAH-CALUX. Moreover, the bioassay was able to detect AhR-mediated activity caused by non-regulated PAHs and PCBs, whereas this would have been missed by conventional chemical target analysis. Last, a field study was conducted in Dutch DW sources at six sampling moments. The PAH-CALUX detected AhR-mediated activity at all sampling moments and an ecological effect-based trigger (EBT) value was exceeded on multiple accounts. Combined application of GC-tQ-MS and the PAH-CALUX ensures compliancy with monitoring legislation and provides additional insights into potential hazards to humans and the environment.

The contribution of PFAS to thyroid hormone-displacing activity in Dutch waters: A comparison between two in vitro bioassays with chemical analysis.

Per- and polyfluoroalkyl substances (PFAS) are a group of xenobiotics that are widely distributed throughout the aquatic environment. Many PFAS are possible thyroid hormone (TH) system disrupting compounds, because they have the capacity to -amongst other- inhibit the TH thyroxine (T4) from binding to its transport protein transthyretin (TTR). This study investigated the occurrence of TH-displacing activity in the Dutch water cycle, and more specifically, the contribution of PFAS to this effect. Over one year of monitoring data of 29 PFAS (linear and branched) showed the continuous presence of PFAS in drinking waters and their surface water sources. Secondly, the FITC-T4 and TTR-TRß-CALUX bioassays were mutually compared using positive (HPLC-grade water spiked with PFOA) and negative control samples (HPLC-grade water), as well as relative potency factors (RPFs) of up to 20 PFAS congeners. Both assays were found to be suitable for measuring TH-displacing activity in water samples. As a third aim, a field study was performed in the Dutch water cycle that was comprised of samples from drinking water, surface water, PFAS contaminated sites, and 2 wastewater treatment plants. All samples were analyzed with 1. chemical analysis for 29 PFAS, 2. the FITC-T4 bioassay, and 3. the TTR-TRß-CALUX bioassay. The bioassays mutually showed good correlation (R2 0.85). Bioanalytical equivalent concentrations (BEQ) based on chemically-determined concentrations and RPFs (BEQchem) revealed that analyzed PFAS only explained ≤4.1 % of their activity in water extracts measured by both bioassays (BEQbio). This indicated that as yet unknown compounds contribute to the majority of the measured TH-displacing activity. Moreover, water treatment processes (e.g. DW production from SW) showed a larger contribution of target PFAS to the BEQbio. This could be a first lead to identify unknown compounds that contribute to this activity, and as such, enable the assessment of possible risks associated by the occurrence of TH-displacing activity in water.

[Skin disorders associated with monoclonal gammopathies]. / Huidafwijkingen bij monoklonale gammopathieën.

A monoclonal gammopathy is a condition in which a monoclonal immunoglobulin (M-protein, formerly known as paraprotein) produced by a clonal proliferation of plasma cells is present in the blood. The spectrum of monoclonal gammopathies includes monoclonal gammopathy of uncertain significance (MGUS), multiple myeloma, Waldenström disease, plasmacytoma and primary amyloidosis. Various skin diseases are associated with monoclonal gammopathies. These are often rare skin diseases which are not easily recognised. This association is important to be known, in order to screen these patients for M-proteins and if necessary refer them to a haematologist. We present a 62-year-old male with cryoglobulinaemia and MGUS, a 64-year-old male with lichen myxoedematosus and MGUS and a 74-year-old male with necrobiotic xanthogranuloma and probably MGUS.

Changes in muscle fiber conduction velocity indicate recruitment of distinct motor unit populations.

To obtain more insight into the changes in mean muscle fiber conduction velocity (MFCV) during sustained isometric exercise at relatively low contraction levels, we performed an in-depth study of the human tibialis anterior muscle by using multichannel surface electromyogram. The results show an increase in MFCV after an initial decrease of MFCV at 30 or 40% maximum voluntary contraction in all of the five subjects studied. With a peak velocity analysis, we calculated the distribution of conduction velocities of action potentials in the bipolar electromyogram signal. It shows two populations of peak velocities occurring simultaneously halfway through the exercise. The MFCV pattern implies the recruitment of two different populations of motor units. Because of the lowering of MFCV of the first activated population of motor units, the newly recruited second population of motor units becomes visible. It is most likely that the MFCV pattern can be ascribed to the fatiguing of already recruited predominantly type I motor units, followed by the recruitment of fresh, predominantly type II, motor units.

An additional phase in PCr use during sustained isometric exercise at 30% MVC in the tibialis anterior muscle.

The occurrence of an abrupt acceleration in phosphocreatine hydrolysis in the tibial anterior muscle during the last part of a sustained isometric exercise at 30% maximal voluntary contraction until fatigue is demonstrated in seven out of eight healthy subjects by applying in vivo 31P NMR spectroscopy at 1.5 T field strength. This additional third phase in PCr hydrolysis, is preceded by a common biphasic pattern (first fast then slow) in PCr use. The NMR spectra, as localized by a surface coil and improved by proton irradiation, were collected at a time resolution of 16 s. Mean rates of PCr hydrolysis during exercise were -0.44 +/- 0.19% s(-1), -0.07 +/- 0.04% s(-1), and -0.29 +/- 0.10% s(-1) for the three successive phases. The increased rate of PCr hydrolysis, and also the loss of fine force control evident in the force records are consistent with increased involvement of large, fast-fatiguable units later in the contraction.

pH heterogeneity in tibial anterior muscle during isometric activity studied by (31)P-NMR spectroscopy.

The occurrence of pH heterogeneity in human tibial anterior muscle during sustained isometric exercise is demonstrated by applying (31)P-nuclear magnetic resonance (NMR) spectroscopy in a study of seven healthy subjects. Exercise was performed at 30 and 60% of maximal voluntary contraction (MVC) until fatigue. The NMR spectra, as localized by a surface coil and improved by proton irradiation, were obtained at a high time resolution (16 s). They revealed the simultaneous presence of two pH pools during most experiments. Maximum difference in the two pH levels during exercise was 0.40 +/- 0.07 (30% MVC, n = 7) and 0.41 +/- 0.03 (60% MVC, n = 3). Complementary two-dimensional (31)P spectroscopic imaging experiments in one subject supported the supposition that the distinct pH pools reflect the metabolic status of the main muscle fiber types. The relative size of the P(i) peak in the spectrum attributed to the type II fiber pool increases with decreasing pH levels. This phenomenon is discussed in the context of the size principle stating that the smaller (type I) motor units are recruited first.

Pathways for extracellular Fenton chemistry in the brown rot basidiomycete Gloeophyllum trabeum.

The brown rot fungus Gloeophyllum trabeum uses an extracellular hydroquinone-quinone redox cycle to reduce Fe(3+) and produce H(2)O(2). These reactions generate extracellular Fenton reagent, which enables G. trabeum to degrade a wide variety of organic compounds. We found that G. trabeum secreted two quinones, 2,5-dimethoxy-1,4-benzoquinone (2,5-DMBQ) and 4,5-dimethoxy-1,2-benzoquinone (4,5-DMBQ), that underwent iron-dependent redox cycling. Experiments that monitored the iron- and quinone-dependent cleavage of polyethylene glycol by G. trabeum showed that 2,5-DMBQ was more effective than 4,5-DMBQ in supporting extracellular Fenton chemistry. Two factors contributed to this result. First, G. trabeum reduced 2,5-DMBQ to 2,5-dimethoxyhydroquinone (2,5-DMHQ) much more rapidly than it reduced 4,5-DMBQ to 4,5-dimethoxycatechol (4,5-DMC). Second, although both hydroquinones reduced ferric oxalate complexes, the predominant form of Fe(3+) in G. trabeum cultures, the 2,5-DMHQ-dependent reaction reduced O(2) more rapidly than the 4,5-DMC-dependent reaction. Nevertheless, both hydroquinones probably contribute to the extracellular Fenton chemistry of G. trabeum, because 2,5-DMHQ by itself is an efficient reductant of 4,5-DMBQ.

Cellulose-Lignin Interactions (A Computational Study).

Within a broader program of study of the molecular structure of plant cell walls, molecular dynamics calculations were used to explore the character of the motion of lignin model compounds near a cellulose surface. Model cellulose microfibrils, which have a large number of hydroxyl groups on the surface, appear to have a net attractive interaction with the lignin models examined in this study. The lignin monomer coniferyl alcohol rapidly adsorbed onto the surface from a water layer after it was released 13 A from the surface. The major long-range force responsible for this adsorption is likely electrostatic. The attractive interaction is sufficient to restrict the motion of coniferyl alcohol when it is within 1 A of the surface and to orient the phenyl ring parallel to the surface. The [beta]-O-4-linked trimer also was observed to adsorb onto the surface with two of its phenyl rings parallel to the surface. These results suggest a mechanism by which the polysaccharide component of the plant cell wall could influence the structure of lignin. Furthermore, they provide a rationalization of the experimental observation that polysaccharides can change the course of dehydrogenation polymerization of cinnamyl alcohols.