Neuroprotective effects of intermittent fasting in the aging brain.

BACKGROUND: A major risk factor for neurodegenerative disorders is old age. Nutritional interventions that delay aging, such as calorie restriction (CR) and intermittent fasting (IF), as well as pharmaceuticals that affect the pathways linking nutrition and aging processes, have been developed in recent decades and have been shown to alleviate the effects of aging on the brain. SUMMARY: CR is accomplished by alternating periods of ad libitum feeding and fasting. In animal models, IF has been shown to increase lifespan and slow the progression and severity of age-related pathologies such as cardiovascular and neurodegenerative diseases and cancer. According to recent research, dietary changes can help older people with dementia retain brain function. However, the mechanisms underlying the neuroprotective effect of IF on the aging brain and related questions in this area of study (i.e., the potential of IF to treat neurodegenerative disorders) remain to be examined. KEY MESSAGES: This review addresses the hypothesis that IF may have translational potential in protecting the aged brain while summarizing the research supporting the putative neuroprotective mechanisms of IF in animal models. Additionally, given the emerging understanding of the connection between aging and dementia, our investigations may offer a fresh perspective on the use of dietary interventions for enhancing brain function and preventing dementia in elderly individuals. Finally, the absence of guidelines regarding the application of IF in patients hampers its broad utilization in clinical practice, and further studies are needed to improve our knowledge of the long-term effects of IF on dementia before it can be widely prescribed. In conclusion, IF may be an ancillary intervention for preserving memory and cognition in elderly individuals.

A novel immune-related long noncoding RNA (lncRNA) pair model to predict the prognosis of triple-negative breast cancer.

Background: Breast cancer (BC) is the most prevalent cancer type and is the principal cause of cancer-related death in women. Anti-programmed cell death protein 1/programmed cell death ligand 1 (PD-1/PD-L1) immunotherapy has shown promising effects in metastatic triple-negative breast cancer (TNBC), but the potential factors affecting its efficacy have not been elucidated. Immune-related long noncoding RNAs (irlncRNAs) have been reported to be involved in immune escape to influence the carcinogenic process through the PD-1/PD-L1 signaling pathway. Therefore, exploring the potential regulatory mechanism of irlncRNAs in PD-1/PD-L1 immunotherapy in TNBC is of great importance. Methods: We retrieved transcriptome profiling data from The Cancer Genome Atlas (TCGA) and identified differentially expressed irlncRNA (DEirlncRNA) pairs. Least absolute shrinkage and selection operator (LASSO) regression analysis was performed to construct a risk assessment model. Results: Receiver operating characteristic (ROC) curve analysis indicated that the risk model may serve as a potential prediction tool in TNBC patients. Clinical stage and risk score were proved to be independent prognostic predictors by univariate and multivariate Cox regression analyses. Subsequently, we investigated the correlation between the risk model and tumor-infiltrating immune cells and immune checkpoints. Finally, we identified USP30-AS1 through the StarBase and Multi Experiment Matrix (MEM) databases, predicted the potential target genes of USP30-AS1, and then discovered that these target genes were closely associated with immune responses. Conclusions: Our study constructed a risk assessment model by irlncRNA pairs regardless of expression levels, which contributed to predicting the efficacy of immunotherapy in TNBC. Furthermore, the lncRNA USP30-AS1 in the model was positively correlated with the expression of PD-L1 and provided a potential therapeutic target for TNBC.

Polyfluorinated crosslinker-based solid polymer electrolytes for long-cycling 4.5 V lithium metal batteries.

Solid polymer electrolytes (SPEs), which are favorable to form intimate interfacial contacts with electrodes, are promising electrolyte of choice for long-cycling lithium metal batteries (LMBs). However, typical SPEs with easily oxidized oxygen-bearing polar groups exhibit narrow electrochemical stability window (ESW), making it impractical to increase specific capacity and energy density of SPE based LMBs with charging cut-off voltage of 4.5 V or higher. Here, we apply a polyfluorinated crosslinker to enhance oxidation resistance of SPEs. The crosslinked network facilitates transmission of the inductive electron-withdrawing effect of polyfluorinated segments. As a result, polyfluorinated crosslinked SPE exhibits a wide ESW, and the Li|SPE|LiNi0.5Co0.2Mn0.3O2 cell with a cutoff voltage of 4.5 V delivers a high discharge specific capacity of ~164.19 mAh g-1 at 0.5 C and capacity retention of ~90% after 200 cycles. This work opens a direction in developing SPEs for long-cycling high-voltage LMBs by using polyfluorinated crosslinking strategy.

Room-Temperature All-Solid-State Sodium Battery Based on Bulk Interfacial Superionic Conductor.

All-solid-state sodium batteries (ASSSBs) are attractive alternatives to lithium-ion batteries for grid-scale energy storage due to their high safety and ubiquitous distribution of Na sources. A critical component for ASSSB is sodium-ion conducting solid-state electrolyte (SSE). Here, we report a high-performance sodium-ion SSE with the recently developed bulk interfacial superionic conductor (BISC) concept. The ionic conductivity and areal conductance of the Na+ BISC at 25 °C reaches 6.5 × 10-4 S cm-1 and 260 mS cm-2, respectively. Using NaxCo0.7Mn0.3O2 (x ≈ 1.0, NaCMO) as the cathode active material, all-solid-state Na||NaCMO batteries exhibiting small overpotential and ∼180 cycle life are demonstrated under room temperature. This approach may also be used to prepare other metal ion, such as Mg2+, Al3+, and K+, based all-solid-state batteries.

Superionic Conductors via Bulk Interfacial Conduction.

Superionic conductors with ionic conductivity on the order of mS cm-1 are expected to revolutionize the development of solid-state batteries (SSBs). However, currently available superionic conductors are limited to only a few structural families such as garnet oxides and sulfide-based glass/ceramic. Interfaces in composite systems such as alumina in lithium iodide have long been identified as a viable ionic conduction channel, but practical superionic conductors employing the interfacial conduction mechanism are yet to be realized. Here we report a novel method that creates continuous interfaces in the bulk of composite thin films. Ions can conduct through the interface, and consequently, the inorganic phase can be ionically insulating in this type of bulk interface superionic conductors (BISCs). Ionic conductivities of lithium, sodium, and magnesium ion BISCs have reached 1.16 mS cm-1, 0.40 mS cm-1, and 0.23 mS cm-1 at 25 °C in 25 µm thick films, corresponding to areal conductance as high as 464 mS cm-2, 160 mS cm-2, and 92 mS cm-2, respectively. Ultralow overpotential and stable long-term cycling for up to 5000 h were obtained for solid-state Li metal symmetric batteries employing Li ion BISCs. This work opens new structural space for superionic conductors and urges for future investigations on detailed conduction mechanisms and material design principles.

Cationic Covalent Organic Framework Nanosheets for Fast Li-Ion Conduction.

Covalent organic frameworks (COFs) with their porous structures that are accommodative of Li salts are considered to be potential candidates for solid-state fast Li+ conductors. However, Li salts simply infiltrated in the pores of solid-state COFs tend to be present in closely associate ion pairs, resulting in slow ionic diffusion dynamics. Here we incorporate cationic skeleton into the COF structure to split the Li salt ion pair through stronger dielectric screening. It is observed that the concentration of free Li+ ions in the resulting material is drastically increased, leading to a significantly improved Li+ conductivity in the absence of any solvent (up to 2.09 × 10-4 S cm-1 at 70 °C).

In situ wrapping of the cathode material in lithium-sulfur batteries.

While lithium-sulfur batteries are poised to be the next-generation high-density energy storage devices, the intrinsic polysulfide shuttle has limited their practical applications. Many recent investigations have focused on the development of methods to wrap the sulfur material with a diffusion barrier layer. However, there is a trade-off between a perfect preassembled wrapping layer and electrolyte infiltration into the wrapped sulfur cathode. Here, we demonstrate an in situ wrapping approach to construct a compact layer on carbon/sulfur composite particles with an imperfect wrapping layer. This special configuration suppresses the shuttle effect while allowing polysulfide diffusion within the interior of the wrapped composite particles. As a result, the wrapped cathode for lithium-sulfur batteries greatly improves the Coulombic efficiency and cycle life. Importantly, the capacity decay of the cell at 1000 cycles is as small as 0.03% per cycle at 1672 mA g-1.To suppress the polysulfide shuttling effect in Li-S batteries, here the authors report a carbon/sulfur composite cathode with a wrapping layer that overcomes the trade-off between limiting polysulfide diffusion and allowing electrolyte infiltration, and affords extraordinary cycling stability.