Wet adhesive hydrogels based on niobium carbide for experimental research of oral mucosal impairment.

Oral mucosal impairment is a prevalent oral disease that frequently causes pain for patients. Conventional treatments have limited effectiveness and can cause adverse reactions. Furthermore, the moist and dynamic nature of the oral mucosal environment makes persistent adherence of conventional materials challenging, which can affect treatment efficacy. In this study, we investigated the potential of a NbC/TA-GelMA hydrogel system, where niobium carbide (NbC) and tannic acid (TA) were added to gelatin methacryloyl (GelMA), for repairing oral mucosal impairment. The wet adhesion properties of NbC/TA-GelMA hydrogels were confirmed by the inclusion of TA with a catechol-rich group. In addition, the photothermal effect of NbC/TA-GelMA hydrogel under near-infrared light, synergizing with TA, provided sustained antibacterial action. Furthermore, the NbC/TA-GelMA hydrogel effectively healed damaged oral mucosa of rats.

Self-propelled bioglass janus nanomotors for dentin hypersensitivity treatment.

Dentin hypersensitivity treatment is not always successful owing to the exfoliation of the blocking layer. Therefore, efficiently delivering a desensitization agent into the dental tubule is critical. Nanomotors are widely used as in vivo drug delivery systems owing to their strong power and good biocompatibility. Herein, we report a kind of self-propelled bioglass Janus nanomotor with a Pt motion unit (nBGs@Pt) for application in dentin hypersensitivity that was prepared via a simple sol-gel method and magnetron sputtering method, with an average size of 290 nm. The Pt layer as the power unit provided the dynamics to deliver the bioglass (desensitization agent). Using hydrogen peroxide as a fuel, the nBGs@Pt could automatically move in different media. In addition, the nBGs@Pt with a mesoporous structure demonstrated good hydroxyapatite formation performance. An in vitro dentin pressure model was used to verify the blocking ability of the nBGs@Pt in dentin tubules. The dynamics of the nBGs@Pt was sufficient to resist the outflow of dentin fluid and movement into the dentin tubules, with a blocking rate of 58.05%. After remineralization, the blocking rate could reach 96.07% and the formation of hydroxyapatite of up to 10 µm or more occurred. It is expected that this study will provide a simple and feasible new strategy for the painless treatment of dentin sensitivity.

Dual Nanozyme-Driven PtSn Bimetallic Nanoclusters for Metal-Enhanced Tumor Photothermal and Catalytic Therapy.

Specific generation of reactive oxygen species (ROS) within tumors in situ catalyzed by nanozymes is a promising strategy for cancer therapeutics. However, it remains a significant challenge to fabricate highly efficient nanozymes acting in the tumor microenvironment. Herein, we develop a bimetallic nanozyme (Pt50Sn50) with the photothermal enhancement of dual enzymatic activities for tumor catalytic therapy. The structures and activities of PtSn bimetallic nanoclusters (BNCs) with different Sn content are explored and evaluated systematically. Experimental comparisons show that the Pt50Sn50 BNCs exhibit the highest activities among all those investigated, including enzymatic activity and photothermal property, due to the generation of SnO2-x with oxygen vacancy (Ovac) sites on the surface of Pt50Sn50 BNCs. Specifically, the Pt50Sn50 BNCs exhibit photothermal-enhanced peroxidase-like and catalase-like activities, as well as a significantly enhanced anticancer efficacy in both multicellular tumor spheroids and in vivo experiments. Due to the high X-ray attenuation coefficient and excellent light absorption property, the Pt50Sn50 BNCs also show dual-mode imaging capacity of computed tomography and photoacoustic imaging, which could achieve in vivo real-time monitoring of the therapeutic process. Therefore, this work will advance the development of noble-metal nanozymes with optimal composition for efficient tumor catalytic therapy.

Niobium carbide-mediated photothermal therapy for infected wound treatment.

Bacterial infections of the wounds on the skin surface significantly reduce the rate of wound healing, potentially leading to serious systemic infections. Antibiotics are the first-line drugs for the treatment of these infections. However, the misuse and overuse of antibiotics have led to the emergence of bacterial resistance. Therefore, a new antimicrobial strategy is urgently needed. Photothermal therapy (PTT) is a novel efficient therapeutic technique that can produce irreversible cell damage to induce death of bacteria, possessing a great potential in infected wound healing. This work describes the use of a new photothermal agent (PTA) such as niobium carbide (NbC) nanoparticles with outstanding near-infrared (NIR) absorption property. NbC nanoparticles converted NIR laser irradiation energy into localized heat for photothermal treatment. In vitro antimicrobial experiments have revealed that NbC nanoparticles exert excellent antimicrobial effects against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli). Moreover, NbC nanoparticles accelerated E. coli-infected wound healing process, reduced inflammatory response, and showed good biosafety in vivo. Altogether, NbC nanoparticles represent an efficient PTA for antimicrobial treatment and are a bio-safe material with low toxicity in vivo.

Identification of COL1A1 associated with immune infiltration in brain lower grade glioma.

Brain low grade gliomas (LGG) often give serious clinical symptoms due to the invasion towards nervous system, affecting the life quality of patients. Collagen type I alpha 1(COL1A1) is the main component of type I collagen. Although there are many reports about abnormal expression of COL1A1 in various tumors, specific role and clinical significance of COL1A1 in LGG have not yet been elucidated. In this work, Tumor Immune Estimation Resource database was used for detecting the expression level of COL1A1 in cancer and normal tissues, and aimed to explore the relationship between COL1A1 and tumor immune infiltration. We applied Kaplan-Meier to analyze the role of COL1A1 in clinical prognosis. Univariate survival rate and multivariate Cox analysis were used to compare clinical characteristics and survival rate. The relativity between the expression of COL1A1 and the tumor microenvironment was evaluated using ESTIMATE algorithm. Finally, the relationship between expression level of COL1A1 and gene marker sets of immune cell infiltration was investigated via TIMER. According to TCGA, COL1A1 overexpression was correlated with overall survival (OS), progression free interval (PFI) and disease specific survival (DSS) of multiple tumors, especially in LGG. Multivariate analysis showed that COL1A1 expression was an independent prognostic factor for LGG. The expression of COL1A1 was positively correlated with the infiltration of CD4 + T and CD8 + T cells, neutrophils, macrophages and dendritic cells in LGG. In addition, there was a strong correlation between expression of COL1A1 and different immune marker sets in LGG. The results suggest that COL1A1 is related with tumor immune infiltration of LGG.

Photothermal treatment of oropharyngeal cancer with carbon-defective silicon carbide.

Oral squamous carcinoma (OSCC) is a clinical common tumor with high recurrence rate and low 5 year survival rate. In this work, photothermal antitumor treatment has been performed to treat OSCC by taking anti-wound infection into consideration. By introducing C defects, we have successfully converted the semi-conductive SiC into metallic carbon-defective silicon carbide (SiC1-x), and endowed it with the near infrared absorption property for photothermal therapy (PTT). The results revealed that SiC1-x mediated PTT treatment could remove solid OSCC tumor in a biosafe way, showing low hematotoxicity, cytotoxicity and tissue toxicity. Moreover, the low invasion of PTT treatment could not only prevent the invasion of bacteria, but also realize an antibacterial effect on the wound, both of which are important for oral surgery. SiC1-x could be excreted from the body post treatment, which thus reduces the long-term potential toxicity. On the whole, this study provided a promising way to treat OSCC in an effective and safe way.

Rapid structural regulation, apatite-inducing mechanism and in vivo investigation of microwave-assisted hydrothermally treated titania coating.

Owing to the poor bioactivity of microarc oxidation (MAO) coating and the rapid activation ability of the microwave hydrothermal (MH) technique, MH treatment was applied to optimize the in vivo interface status between MAO-treated titanium and bone. In this study, consequently, new outermost layers were prepared using hydroxyapatite (HA) nanorods, HA submicron pillars or sodium titanate nanosheets. The results revealed that the NaOH concentration significantly influenced the surface structure and phase constitution of the MAO samples. Moreover, on enhancing the NaOH concentration, the number of HA phases was decreased. Further, the influence of the NaOH concentration on the interfacial bonding strength was insignificant for concentrations ≤0.5 mol L-1. Transmission electron microscopy (TEM) analysis showed that the induction of apatite was accompanied by the dissolution of the HA crystals and there was excellent crystallographic matching with the HA crystals. The in vitro and in vivo analyses revealed that the MH-treated MAO sample with the HA nanorods possessed superior apatite-formation ability and osseointegration, including a small amount of soft tissue and optimal bone-implant interfacial bonding force, thus signifying strong potential for the optimization of the bone-implant interfacial status.

Electronic coupling between molybdenum disulfide and gold nanoparticles to enhance the peroxidase activity for the colorimetric immunoassays of hydrogen peroxide and cancer cells.

Peroxidase nanoenzymes exhibit a specific affinity toward substrates, thereby demonstrating application potential for realizing the colorimetric immunoassays of hydrogen peroxide (H2O2), which can be further used as a probe for imaging cancer cells. To enhance the intrinsic peroxidase activity of molybdenum sulfide (MoS2) nanomaterials, gold (Au) nanoparticles with an average diameter of approximately 2.1 nm were modified on a MoS2/carbon surface (denoted as MoS2/C-Au600) via ascorbic acid reduction. MoS2/C-Au600 can oxidize 3,3',5,5'-tetramethylbenzidine (TMB) to generate a blue oxidation product in the presence of H2O2; this product exhibits peroxidase-like activities, superior to those of most existing MoS2-based nanoenzymes. Furthermore, MoS2/C-Au600 exhibits a high detection capability for H2O2 in the range of 1 × 10-5 to 2 × 10-4 mol/L (R2 = 0.99), and the lowest detection limit is 1.82 µmol/L in a sodium acetate and acetic acid buffer solution. Steady state kinetics studies indicate that the catalytic mechanism is consistent with the ping-pong mechanism. Given its strong absorption peak at 652 nm in the visible region, MoS2/C-Au600 can be used to image cancer cells due to the enhanced permeability and retention effect. Our findings demonstrate that the synergistic electronic coupling between multiple components can enhance the peroxidase activity, which can facilitate the development of an effective, facile, and reliable method to perform colorimetric immunoassays of H2O2 and cancer cells.

Forecastable and Guidable Bubble-Propelled Microplate Motors for Cell Transport.

Cell transport is important to renew body functions and organs with stem cells, or to attack cancer cells with immune cells. The main hindrances of this method are the lack of understanding of cell motion as well as proper transport systems. In this publication, bubble-propelled polyelectrolyte microplates are used for controlled transport and guidance of HeLa cells. Cells survive attachment on the microplates and up to 22 min in 5% hydrogen peroxide solution. They can be guided by a magnetic field whereby increased friction of cells attached to microplates decreases the speed by 90% compared to pristine microplates. The motion direction of the cell-motor system is easier to predict due to the cell being opposite to the bubbles.

Guidable Thermophoretic Janus Micromotors Containing Gold Nanocolorifiers for Infrared Laser Assisted Tissue Welding.

Current wound sealing systems such as nanoparticle-based gluing of tissues allow almost immediate wound sealing. The assistance of a laser beam allows the wound sealing with higher controllability due to the collagen fiber melting which is defined by loss of tertiary protein structure and restoration upon cooling. Usually one employs dyes to paint onto the wound, if water absorption bands are absent. In case of strong bleeding or internal wounds such applications are not feasible due to low welding depth in case of water absorption bands, dyes washing off, or the dyes becoming diluted within the wound. One possible solution of these drawbacks is to use autonomously movable particles composing of biocompatible gold and magnetite nanoparticles and biocompatible polyelectrolyte complexes. In this paper a proof of principle study is presented on the utilization of thermophoretic Janus particles and capsules employed as dyes for infrared laser-assisted tissue welding. This approach proves to be efficient in sealing the wound on the mouse in vivo. The temperature measurement of single particle level proves successful photothermal heating, while the mechanical characterizations of welded liver, skin, and meat confirm mechanical restoration of the welded biological samples.

Self-propelled two dimensional polymer multilayer plate micromotors.

This communication sheds light on the production method and motion patterns of autonomous moving bubble propelled two dimensional micro-plate motors. The plate motors are produced by the well-known layer-by-layer self-assembly process in combination with micro-contact printing. The motion analysis covers instances of oscillating bubble development on one or more nucleation sites, which influence the motion speed and direction.

[Role of Survivin gene on the apoptosis of adenoid cystic carcinoma-2 cells induced by arsenic trioxide].

OBJECTIVE: To investigate the proliferation effects of arsenic trioxide (As2O3) on salivary adenoid cystic carcinoma-2 (ACC-2) cells in vitro and to study the role of Survivin on the apoptosis of ACC-2 induced by As2O3. METHODS: ACC-2 cells were treated with different concentration of As2O3 for different time. The inhibitory effects on cell's viability were assayed with methyl thiazolyl tetrazolium (MTT) test. Apoptosis was determined by flow cytometry. The expression of Survivin mRNA and protein were investigated by reverse transcription-polymerase chain raction (RT-PCR) and Western blot analysis respectively. RESULTS: Cell viability after As2O3 treatment was markedly suppressed and exhibited as a dose- and time-dependent pattern. The apoptotic index showed the similar trend. The results of RT-PCR revealed gene expression of Survivin was suppressed significantly. Through Western blot analysis, a negative correlation between concentration and amount of protein product of Survivin was determined. CONCLUSION: As2O3 might markedly suppressed ACC-2 cell's viability in vitro. The inhibition of Survivin gene expression may play a critical role on ACC-2 cell apoptosis induced by As2O3.