RESUMO
BACKGROUND: Gastric cancer presents a major health burden worldwide. Therefore, many molecular targeting agents have been evaluated for treatment of gastric cancer. Gefitinib has shown anticancer activity against gastric cancer which work through inhibiting epidermal growth factor receptor (EGFR). However, the effect of gefitinib is limited due to its resistance. Therefore, understanding the mechanisms of gefitinib resistance is desperately needed to formulate novel strategies against gastric cancer. Here, we analyzed resistance mechanism from the crosstalk between EGFR and integrin ß4. METHODS: Integrin ß4-expression vector or siRNA were used to analyze the functional effects of integrin ß4 on chemoresistance of gastric cancer cells to gefitinib. EGFR and integrin ß4 expression, proliferation and apoptosis of gastric cancer cells were assayed by indirect immunofluorescence, western blot, MTT and flow cytometry respectively. EGFR and integrin ß4 expression were also assayed on patient samples. RESULTS: It was found that the integrin ß4 expression was increased in gefitinib-resistant gastric cell line. The upregulated integrin ß4 expression was identified to promote gefitinib resistance and proliferation, and inhibit apoptosis, while downregulation of integrin ß4 was to inhibit gefitinib resistance and proliferation, and induce apoptosis. Moreover, the overexpression of integrin ß4 in SGC7901 cells resulted in the down-regulation of p-EGFR protein levels while down-regulation of integrin ß4, significantly resulted in overexpression of p-EGFR. The results of western blot from patients also showed there was obvious negative correlation between p-EGFR and integrin ß4 in gastric cancer patients. CONCLUSION: Considering the above results, it is concluded that the interaction of EGFR and integrin ß4 may change the sensitivity of gefitinib treatment.
RESUMO
Objective To explore the methodology of reconstruction of a three-dimensional model of lid/cheek junction through continuous paraffin sections and stained lid/cheek junction three-dimensional visualization,and to further explore the feasibility and reliability to provide anatomical basis for clinical teaching of plastic and reconstructive surgery.Methods The full size of lid/cheek junction was cut from the specimens,the size of 25 mm× 15 mm× 10 mm,and then embedded in paraffin,and sectioned in thickness of 15 μm for 200 slices;the experimental HE staining and Masson staining were conducted,Sony camera photos using Adobe Photoshop CS 5.1 image processing software for image registration and 3D-Docter software image segmentation were used to give different colors for establishment of complete three-dimensional model.Results Histologically the LOT of the fascia area,the existence of reconstruction and the LOT model were confirmed.It showed the histological characteristics:the Masson stain displayed red,blue and white tissues in color;fascia tissue staining infered intertexture of elastic fibers and collagen fibers in LOT.LOT was the bottom edge of the triangle toward the orbital base with length of 26 mm,31 mm in high,0.8 mm in thick,and area of approximately 4.03 cm2 in size.Layers of skin,orbicularis oculi muscle,orbicularis retaining ligament,middle temporal fascia,periosteum and LOT were visible in the 3D model.By the three-dimensional model of lid/cheek junction,adjacent relationship could be rotated to any angle.Conclusions This initial establishment of a three-dimensional model of the lid/cheek junction confirms that the histological characteristics of lid/cheek junction and the feasibility of the fine structure of soft tissue within the three-dimensional model can be used as a new method for further research.
RESUMO
Objective To identify the anatomical basis for aging orbit-malar fold forming orbitmalar groove and its underlying mechanism.Methods Thirteen cadavers (26 hemifaces) were dissected in this study (9 male and 4 female heads).All specimens were fixed in 10％ formalin,with age ranges from 22 to 78 years.The lateral orbital region was dissected in layers by mieroinsrument using 10 X loupe magnification,especially at the palpebral and the lateral orbital part,and then the anatomy layer was described; the lateral orbital thickening (LOT) was performed carefully to evaluate whether there were multiple anatomical contributions to anatomy.Anatomic observations were systematically recorded,sketched,and photographically documented.Results The lateral orbital layers included skin,subcutaneous adipose tissue,orbicularis oculi muscle,middle temporal fascia,and periosteum.The lateral orbital thickening was a triangular condensation of fascia,which extended over the lateral orbital rim onto the adjacent medial tem~ral fascia,the lateral orbital thickening was measured (9.28 ±0.45) mm in transverse width from Vertex triangle to lateral canchal,the inner part of the LOT sanwiched between orbibularis and obital septum,which consisted of upper lid and lower lid part,the lower lid part presented transverse V shape,the top part of the transverse V was adhesive to fascial tissue over tarsal plate.The distance to lateral canthus angular was 21.69-37.21 mm,and the under part was adhesive to low orbital rim the low arm distance to lateral canthus angular was (13.55 ±0.52) mm.Vertex of.V to lateral canthus angular vertical distance was (11.35±0.27) mm.Conclusions The reason why aging orbit-malar fold forms orbital-malar groove is the atrophy of the subcutaneous adipose tissue and the middle temporal fascia fat.
RESUMO
Objective To investigate the forming mechanism of smile anatomically,and to analyze the changes of aging characteristics of mid-lower face.Methods Ten (with 20 sides) adult fresh cadaveric heads were fixed by formalin,and then nasolabial fold morphology was observed under 10X operating magnifying glass,and compared with alteration of the middle and lower face aging features under the state of smiling and static according to observation from 50 doctors' and out-patients' photos.Results The nasolabial fold was the boundary between fatty and fat-free zone in the middle face,the lateral side of which was malar fat pad.The nasolabial fold was the linear area,which was formed by the insertions of seven mimetic muscles on the skin.When smiling,the nasolabial fold and cheek groove,got deep and extended,cheek stripe became obvious.While smiling,malar fat pad shifted up,and tear trough became deformity..64％ disappeared and 36％ getting shallow and appearance improved; orbit-malar fold showed 100％ horizontal part disappeared,74 ％ vertical part became shallow and improved,and 26％ stayed stable; mid-cheek fold showed 78％ dissovled,22％ getting shallow and improved; Labiomandibular fold showed 100％ Ⅲ degree disappeared,100％ Ⅱ degree dissovled,74％ Ⅰ degree disappeared,and 26％ getting shallow and ameliorated; submaxilla line showed 18％ getting smooth and 82％ remained.Conclusions Smiling is produced by movement of mimetric muscles,and its orgin is from nasolabial fold.A smile could make malar fat pad upwards to mask some aging characteristics of middle and lower face,which is helpful to form a younger face.
RESUMO
<p><b>OBJECTIVE</b>To explore the mechanism of the aging deformity of tear trough through the anatomic study of the tear trough region.</p><p><b>METHODS</b>13 adult cadaveric heads (26 sides), including 9 male heads (18 sides) and 4 female heads (8 sides), aged 22-78 years old, were used. Anatomic study was performed around the orbital, especially tear trough region, with microsurgery instrument under microscope( x 10 times). The lower orbicularis retaining ligament was dissected and exposed. The anatomic location was recorded and photographed.</p><p><b>RESULTS</b>(1) The anatomic layers of the tear trough region contains skin, subcutaneous tissue, orbicularis oculi muscle, periosteal membrane. There is no subcutaneous fat above the tear trough, while it exists below the tear trough, called malar fat pad. (2) There is a natural boundary between the septal and the orbital portions of the orbicularis oculi muscle of lower eyelid at surface of the orbital bone. The natural boundary, projected on the body surface corresponds to tear trough. The width of boundary is (2.06 +/- 0.15) mm on the vertical line through inner canthus and (3.25 +/- 0.12) mm on the vertical line through the lateral margin of the ala. The septal portion and the orbital portion of the orbicularis oculi muscle began to merge in (16.56 +/- 0.51) mm to inner canthus. (3) There is ligament attachment in the medial, upper and lower orbital and no ligament attachment in the lateral orbital. Orbicularis retaining ligament of lower eyelid is divided into two layers. (4) The medial of the upper layer of the orbicularis retaining ligament in lower eyelid originates from orbital margin and from preorbital walls laterally in (16.10 +/- 0.43) mm to the medial of lateral orbital margin, through orbicularis oculi muscle and ends at the skin. The lower layer of the orbicularis retaining ligament of lower eyelid originates from preorbital walls through orbicularis oculi muscle and its superficial fat, then ends at the skin.</p><p><b>CONCLUSIONS</b>The length of tear trough is (16.56 +/- 0.51) mm, the width of tear trough is (2.06 +/- 0.15) mm and (3.25 +/- 0.12) mm on the vertical line through inner canthus and the lateral margin of the ala nasi respectively. The main reason of the aging deformity of tear trough attributes to the increased distance between the upper and lower layers of the orbicularis retaining ligament in lower eyelid, which is caused by loose of the orbicularis retaining ligament and its underlying fat atrophy or decline.</p>
