The recovery of sulfuric acid from spent piranha solution over a dimensionally stable anode (DSA) Ti-RuO2 electrode.

Piranha solution is a highly acidic mixture of sulfuric acid and hydrogen peroxide. The present study aimed at developing a dimensionally stable anode (DSA), made of titanium metal foil coated with Ruthenium Dioxide (RuO2), for the electrochemical oxidation of hydrogen peroxide in the presence of strong sulfuric acid under ambient conditions. Results showed that hydrogen peroxide in the piranha solution was fully degraded in 5 h under a constant current of 2 A (or current density of 0.32 A-cm-2). The oxidation kinetics of hydrogen peroxide followed the Langmuir-Hinshelwood model. The observed rate constant was a function of applied current. The initial current efficiency was 17.5% at 0.5 A (or 0.08 A-cm-2) and slightly decreased to about 13.5% at applied current between 1.3 and 1.5 A (or current density of 0.208 and 0.24 A-cm-2). Results showed the capability and feasibility of the electrochemical oxidation process for the recovery of sulfuric acid from the spent piranha solution in semiconductor industrial installations or general laboratories.

Adsorption characteristics of ammonium ion onto hydrous biochars in dilute aqueous solutions.

This research aims at studying the characteristics of ammonium adsorption onto hydrous bamboo biochar. Results showed that pH played the most important role in ammonium adsorption. High ionic strength enhanced the ammonium adsorption capacity of bamboo biochar. Ammonium adsorption was exothermic and spontaneous. FTIR results showed shift, disappearance, or appearance of specific functional groups on the bamboo biochar surface. Surface precipitation and complex formation contributed to the adsorption of ammonium onto hydrous bamboo biochar. Biochar can be an effective adsorbate for ammonium removal from water. Additionally, the formation of nitrogen containing precipitates on the biochar surface, potentially, leads to the in-situ synthesis of slow-release fertilizer.

Visualization and quantification of transparent exopolymer particles (TEP) in freshwater using an auto-imaging approach.

Most water sources are full of microscopic transparent exopolymer particles (TEP), which are currently regarded as a major initiator of biofilm formation. This study developed and applied an auto-imaging FlowCAM-based method for online observation and quantification of TEP in freshwater. Samples from reservoirs in Taiwan with a wide range of water quality were directly used to develop this methodology. Factors that potentially affect the measurement were tested. The results showed that characteristics of the particles measured instantaneously after staining samples with Alcian blue differed significantly from those measured at steady states, as a result of particle aggregation. Compared to traditional microscopic methods, this proposed method provides a simple, rapid, and less labor-intensive analysis with particle morphological conservation and a large number of particle attributes. By overcoming the limitations from the former, this technique would offer routine monitoring of these transparent particles from various freshwater sources and feed water in membrane filtration, hence facilitating the use of TEP as a critical parameter for biofouling investigation in water treatment. Application of the method for Taiwan reservoirs showed a wide variety of morphological forms of TEP and its abundance, up to 25,000 ppm.