V-band gapless OFDM RoF system with power detector down-conversion and novel Volterra nonlinear filtering.

This Letter presents a V-band gapless orthogonal frequency division multiplexing (OFDM) RoF system at 60 GHz employing a power detector to support vector signal down-conversion. Additional RF tone is generated and transmitted from a central station to replace the local oscillator at a wireless receiver for power detector down-conversion. To enhance the spectrum efficiency, the gap between the OFDM signal and the RF tone is not needed. However, the down-converted signal will suffer signal-to-signal interference (SSBI). In this Letter, we propose and successfully employ a novel Volterra nonlinear compensation to mitigate SSBI, resulting in a 22% data rate improvement with a bit-loading algorithm.

W-band OFDM Radio-over-Fiber system with power detector for vector signal down-conversion.

This Letter proposes a W-band OFDM RoF system at 103.5 GHz employing power detector to support vector signal down-conversion. Additional RF tone is generated and transmitted from central office to replace the local oscillator at a wireless receiver. With a proper frequency gap and power ratio between the RF tone and the OFDM-modulated signal, the impact from signal-to-signal beating interference can be minimized. The data rate can achieve a 40 Gbps 16 QAM OFDM signal over 25 km fiber and 2 m wireless transmission.

60-GHz optical/wireless MIMO system integrated with optical subcarrier multiplexing and 2x2 wireless communication.

This paper proposes a 2x2 MIMO OFDM Radio-over-Fiber scheme based on optical subcarrier multiplexing and 60-GHz MIMO wireless transmission. We also schematically investigated the principle of optical subcarrier multiplexing, which is based on a dual-parallel Mach-Zehnder modulator (DP-MZM). In our simulation result, combining two MIMO OFDM signals to drive DP-MZM gives rise to the PAPR augmentation of less than 0.4 dB, which mitigates nonlinear distortion. Moreover, we applied a Levin-Campello bit-loading algorithm to compensate for the uneven frequency responses in the V-band. The resulting system achieves OFDM signal rates of 61.5-Gbits/s with BER of 10(-3) over 25-km SMF transmission followed by 3-m wireless transmission.

Ultrahigh capacity 2 × 2 MIMO RoF system at 60 GHz employing single-sideband single-carrier modulation.

This article proposes and experimentally demonstrates a radio-over-fiber system employing single-sideband single-carrier (SSB-SC) modulation at 60 GHz. SSB-SC modulation has a lower peak-to-average-power ratio than orthogonal frequency division multiplex (OFDM) modulation; therefore, the SSB-SC signals provide superior nonlinear tolerance, compared to OFDM signals. Moreover, multiple-input multiple-output (MIMO) technology was used extensively to enhance spectral efficiency. A least-mean-square-based equalizer was implemented, including MIMO channel estimation, frequency response equalization, and I/Q imbalance compensation to recover the MIMO signals. Thus, using 2×2 MIMO technology and 64-QAM SSB-SC signals, we achieved the highest data rate of 84 Gbps with 12 bit/s/Hz spectral efficiency using the 7-GHz license-free band at 60 GHz.

High spectral efficient W-band optical/wireless system employing single-sideband single-carrier modulation.

With broader available bandwidth, W-band wireless transmission has attracted a lot of interests for future Giga-bit communication. In this article, we experimentally demonstrate W-band radio-over-fiber (RoF) system employing single-sideband single-carrier (SSB-SC) modulation with lower peak-to-average-power ratio (PAPR) than orthogonal frequency division multiplex (OFDM). To overcome the inter-symbol interference (ISI) of the penalty from uneven frequency response and SSB-SC modulation, frequency domain equalizer (FDE) and decision feedback equalizer (DFE) are implemented. We discuss the maximum available bandwidth of different modulation formats between SSB-SC and OFDM signals at the BER below forward error correction (FEC) threshold (3.8 × 10(-3)). Up to 50-Gbps 32-QAM SSB-SC signals with spectral efficiency of 5 bit/s/Hz can be achieved.

100-GHz DD-OFDM-RoF system over 150-km fiber transmission employing pilot-aided phase noise suppression and bit-loading algorithm.

This study extended the transmission distance of a 100-GHz DD-OFDM-RoF system through the reduction of chromatic dispersion-induced phase noise. The implementation of a pilot-aided phase noise suppression (PPNS) scheme enabled the transmission of distance-insensitive 16.97-Gbps QPSK OFDM over 0~150-km fiber and 2-m air transmission via a DFB laser with linewidth of 1~10-MHz. We applied a bit-loading algorithm in conjunction with PPNS to maximize spectral efficiency, resulting in a 93% improvement in the data rate from 11.53 to 22.27 Gbps at a fiber transmission of 150 km.

High spectral efficient W-band OFDM-RoF system with direct-detection by two cascaded single-drive MZMs.

W-band wireless transmission has attracted a lot of interest due to its wider available bandwidth (i.e. 75-110 GHz). In this article, we propose a direct-detection orthogonal frequency division multiplexing radio over fiber (OFDM-RoF) system via two cascaded single-drive MZMs at center frequency of 103 GHz. We discuss maximum bandwidth of different modulation formats under forward error correction (FEC) threshold (3.8 x 10(-3)). Up to 40-Gbps 16-QAM OFDM signals is achieved over 25-km fiber and 2-m wireless transmission. To overcome the penalty from uneven frequency response, bit-loading algorithm is applied to discuss data rate and spectral efficiency with signal bandwidth from 5 to 10 GHz. With 10-GHz bandwidth, 46.4-Gb/s data rate and 4.64-bit/s/Hz spectral efficiency was achieved. To achieve 40-Gbps data rate, the required bandwidth of OFDM signal with bit-loading is 2 GHz less than that without bit-loading.