Revealing the Effect of the [CoO]6 Microstructure in Pseudocapacitance by Controlled Delithium of LiCoO2.

Revealing the in-depth structure-property relationship and designing specific capacity electrodes are particularly important for supercapacitors. Despite many efforts made to tune the composition and electronic structure of cobalt oxide for pseudocapacitance, insight into the [CoO]6 octahedron from the microstructure is still insufficient. Herein, we present a tunable [CoO]6 octahedron microstructure in LiCoO2 by a chemical delithiation process. The c-strained strain of the [CoO]6 octahedron is induced to form higher valence Co ions, and the (003) crystalline layer spacing increases to allow more rapid participation of OH- in the redox reaction. Interestingly, the specific capacity of L0.75CO2 is nearly four times higher than that of LiCoO2 at 10 mA g-1. The enhanced activity originated from the asymmetric strain [CoO]6 octahedra, resulting in enhanced electronic conductivity and Co-O hybridization for accelerated redox kinetics. This finding provides new insights into the modification strategy for pseudocapacitive transition metal oxides.

Polymer Chainmail: Steric Hindrance and Charge Compensation of Anion-Doped PEDOT to Boost Stress Deformation of Compressible Supercapacitor.

Conducting polymers with high theoretical capacitance and deformability are among the optimal candidates for compressible supercapacitor electrode materials. However, achieving both mechanical and electrochemical stabilities in a single electrode remains a great challenge. To address this issue, the "Polymer Chainmail" is proposed with reversible deformation capability and enhances stability because of the steric hindrance and charge compensation effect of doped anions. As a proof of concept, four common anions are selected as dopants for Poly(3,4-ethylenedioxythiophene) (PEDOT), and their effects on the adsorption and diffusion of H+ on PEDOT are verified using density functional theory calculations. Owing to the film formation effect, the PF 6 - ${{\rm{PF}}_6^- }$ doped PEDOT/nitrogen-doped carbon foam exhibits good mechanical properties. Furthermore, the composite demonstrates excellent rate performance and stability due to suitable anion doping. This finding provides new insights into the preparation of electrochemically stable conductive polymer-based compressible electrode materials.

High fatty acid productivity from Scenedesmus obliquus in heterotrophic cultivation with glucose and soybean processing wastewater via nitrogen and phosphorus regulation.

In this study, the effects of nitrogen and phosphorus supply on biodiesel production from Scenedesmus obliquus with glucose as the carbon source were investigated. It was found that sufficient phosphorus could further improve biodiesel production under nitrogen starvation. S. obliquus was cultivated in soybean processing wastewater. The removal efficiencies of carbon oxygen demand (COD), total nitrogen (TN), and total phosphorus (TP) after 8-day cultivation were 72%, 95%, and 54%, respectively. Moreover, the fatty acid productivity after eight-day cultivation reached as high as 99.3 mg·L-1·d-1, which was 1.15 times higher than the highest efficiency using a glucose culture. This result was due to two naturally-formed stages occurring with sufficient phosphorus: nitrogen sufficiency stage for biomass and nitrogen starvation stage for lipid accumulation. It verified the conclusion of the roles of nitrogen and phosphorus obtained in the glucose culture and provided an economic and environmentally friendly choice for biodiesel production with efficient soybean wastewater treatment.

Electrochemical reclamation of silver from silver-plating wastewater using static cylinder electrodes and a pulsed electric field.

Silver was reclaimed from silver-plating wastewater by using a pulsed electric field (PEF) combined with static cylinder electrodes (SCE). The conditions that produced the maximal silver recovery rate (RR(Ag)) (99%) were as follows: average retention time of 10 min, interelectrode gap of 50mm, solution pH of 9.0, temperature of 45 degrees C, initial Ag(I) concentration of 1000 mg L(-1), PEF pulse frequency of 1200 Hz, current density of 5.0 A m(-2) and a pulse duty cycle of 60%. Compared with the conventional direct current (DC) technology, the PEF process exhibited improvements in the silver recovery rate (RR(Ag)), total energy consumption (TEC) and physical properties of the silver deposits, especially for low Ag(I) concentrations, for example, from 500 to 1000 mg L(-1). For an initial Ag(I) concentration of 500 mg L(-1), the PEF process produced an RR(Ag) of up to 99%, and the TEC was 4.56 kWh (kg Ag)(-1). In comparison, the RR(Ag) and TEC were 90% and 5.66 kWh (kg Ag)(-1), respectively, in the DC process. The results of SEM observation and XRD analysis indicated that the silver deposits formed by the PEF process were smaller, denser, and of a higher purity than those produced by the DC process. Therefore, the presented method was effective for reclaiming silver from silver-plating wastewater.

[Effects of lead on thyroid function of occupationally exposed workers].

OBJECTIVE: To explore the effects of lead on the thyroid function of occupationally exposed workers. METHOD: 157 workers occupationally exposed to lead in a smelting factory were investigated. The concentration of lead in air at workshop was measured by flame atomic absorption spectrophotometry (FAAS) and the levels of blood lead (PbB) by atomic absorption spectrophotometry (AAS), zinc protoporphyrin (ZPP) by ZnPP meter, as well as the indexes of thyroid function, thyroid-stimulating hormone (TSH), triiodothyronine (T(3)), thyroxin (T(4)), free T(3) (FT(3)), and free T(4) (FT(4)) in serum by radioimmunoassay. RESULTS: The workers with higher level of blood lead (> 2.88 micro mol/L) showed lower levels of T(3) [(1.54 +/- 0.39) nmol/L] and FT(3) [(5.50 +/- 1.26) pmol/L] than those with lower blood lead level [PbB: (1.92 approximately 2.88) micro mol/L group, T(3): (1.71 +/- 0.45) nmol/L, FT(3): (6.12 +/- 1.64) pmol/L, P < 0.05]. There was no obvious effect of length of service on thyroid hormone of exposed workers. CONCLUSION: Higher level of blood lead may cause certain damage to thyroid function by inhibiting deiodination of T(4). No obvious relation between length of service and thyroid function was found.