RESUMO
Transparent electrodes (TEs) are vital in optoelectronic devices, enabling the interaction of light and charges. While indium tin oxide (ITO) has traditionally served as a benchmark TE, its high cost prompts the exploration of alternatives to optimize electrode characteristics and improve device efficiencies. Conducting polymers, which combine polymer advantages with metal-like conductivity, emerge as a promising solution for TEs. This work introduces a two-in-one electron transport layer (ETL) and TE based on films of polyethylenimine ethoxylated (PEIE)-modified poly(benzodifurandione) (PBFDO). These PEIE-modified PBFDO layers exhibit a unique combination of properties, including low sheet resistance (130 Ω sq-1), low work function (4.2 eV), and high optical transparency (>85% in the UV-vis-NIR range). In contrast to commonly used poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS), the doping level of PBFDO remains unaffected by the PEIE treatment, as verified through UV-vis-NIR absorption and X-ray photoelectron spectroscopy measurements. When employed as a two-in-one ETL/TE in organic solar cells, the PEIE-modified PBFDO electrode exhibits performance comparable to conventional ITO electrodes. Moreover, this work demonstrates all-organic solar cells with record-high power conversion efficiencies of >15.1% under indoor lighting conditions. These findings hold promise for the development of fully printed, all-organic optoelectronic devices.
RESUMO
Chemical doping is an important approach to manipulating charge-carrier concentration and transport in organic semiconductors (OSCs)1-3 and ultimately enhances device performance4-7. However, conventional doping strategies often rely on the use of highly reactive (strong) dopants8-10, which are consumed during the doping process. Achieving efficient doping with weak and/or widely accessible dopants under mild conditions remains a considerable challenge. Here, we report a previously undescribed concept for the photocatalytic doping of OSCs that uses air as a weak oxidant (p-dopant) and operates at room temperature. This is a general approach that can be applied to various OSCs and photocatalysts, yielding electrical conductivities that exceed 3,000 S cm-1. We also demonstrate the successful photocatalytic reduction (n-doping) and simultaneous p-doping and n-doping of OSCs in which the organic salt used to maintain charge neutrality is the only chemical consumed. Our photocatalytic doping method offers great potential for advancing OSC doping and developing next-generation organic electronic devices.
RESUMO
Poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) is a benchmark hole-transporting (p-type) polymer that finds applications in diverse electronic devices. Most of its success is due to its facile synthesis in water, exceptional processability from aqueous solutions, and outstanding electrical performance in ambient. Applications in fields like (opto-)electronics, bioelectronics, and energy harvesting/storage devices often necessitate the complementary use of both p-type and n-type (electron-transporting) materials. However, the availability of n-type materials amenable to water-based polymerization and processing remains limited. Herein, we present a novel synthesis method enabling direct polymerization in water, yielding a highly conductive, water-processable n-type conjugated polymer, namely, poly[(2,2'-(2,5-dihydroxy-1,4-phenylene)diacetic acid)-stat-3,7-dihydrobenzo[1,2-b:4,5-b']difuran-2,6-dione] (PDADF), with remarkable electrical conductivity as high as 66 S cm-1, ranking among the highest for n-type polymers processed using green solvents. The new n-type polymer PDADF also exhibits outstanding stability, maintaining 90% of its initial conductivity after 146 days of storage in air. Our synthetic approach, along with the novel polymer it yields, promises significant advancements for the sustainable development of organic electronic materials and devices.
RESUMO
In the context of the national ecological security development strategy, constructing regional ecological networks centered on protected areas and ecological corridors has become an urgent issue in protected areas system development of China. We focused on strengthening ecological connections between protected areas in Guangzhou, identified the ecological resource patches, ecological corridors, and ecological nodes by using Invest model, connectivity analysis, circuit theory models, and graph-theoretical network structure evaluation, and constructed an ecological network for the Guangzhou with nature reserves as the core. The results showed that 52 ecological resource patches were identified in the study area, covering a total area of 1450.01 km2. Nature reserves accounted for 76.4% of the total area, forming the main part of the ecological resource patches. 115 ecological corridors were identified, with a total length of 900.56 km and an average length of 7.83 km. Furthermore, 72 ecological key points were identified, covering a total area of 17.57 km2, and 81 ecological breakpoints, with a total area of 35.9 km2. The network structure indices (α=0.65, ß=2.21, and γ=0.77) indicated a reasonably structured and well-connected network. By exploring pathways for constructing regional ecological networks under the protected areas system and enriching the application of circuit theory models in ecological network construction, this study provides scientific basis for regional ecological security and biodiversity conservation.
Assuntos
Ecologia , Ecossistema , Conservação dos Recursos Naturais , Biodiversidade , ChinaRESUMO
The development of high-energy-density Li||LiCoO2 batteries is severely limited by the instability of cathode electrolyte interphase (CEI) at high voltage and high temperature. Here we propose a mechanically and thermally stable CEI by electrolyte designing for achieving the exceptional performance of Li||LiCoO2 batteries at 4.6â V and 70 °C. 2,4,6-tris(3,4,5-trifluorophenyl)boroxin (TTFPB) as the additive could preferentially enter into the first shell structure of PF6 - solvation and be decomposed on LiCoO2 surface at low oxidation potential to generate a LiBx Oy -rich/LiF-rich CEI. The LiBx Oy surface layer effectively maintained the integrity of CEI and provided excellent mechanical and thermal stability while abundant LiF in CEI further improved the thermal stability and homogeneity of CEI. Such CEI drastically alleviated the crack and regeneration of CEI and irreversible phase transformation of the cathode. As expected, the Li||LiCoO2 batteries with the tailored CEI achieved 91.9 % and 74.0 % capacity retention after 200 and 150â cycles at 4.6 and 4.7â V, respectively. Moreover, such batteries also delivered an unprecedented high-temperature performance with 73.6 % capacity retention after 100â cycles at 70 °C and 4.6â V.
RESUMO
Water-based conductive inks are vital for the sustainable manufacturing and widespread adoption of organic electronic devices. Traditional methods to produce waterborne conductive polymers involve modifying their backbone with hydrophilic side chains or using surfactants to form and stabilize aqueous nanoparticle dispersions. However, these chemical approaches are not always feasible and can lead to poor material/device performance. Here, we demonstrate that ground-state electron transfer (GSET) between donor and acceptor polymers allows the processing of water-insoluble polymers from water. This approach enables macromolecular charge-transfer salts with 10,000× higher electrical conductivities than pristine polymers, low work function, and excellent thermal/solvent stability. These waterborne conductive films have technological implications for realizing high-performance organic solar cells, with efficiency and stability superior to conventional metal oxide electron transport layers, and organic electrochemical neurons with biorealistic firing frequency. Our findings demonstrate that GSET offers a promising avenue to develop water-based conductive inks for various applications in organic electronics.
RESUMO
Organic electrochemical transistors (OECTs) are a rapidly advancing technology that plays a crucial role in the development of next-generation bioelectronic devices. Recent advances in p-type/n-type organic mixed ionic-electronic conductors (OMIECs) have enabled power-efficient complementary OECT technologies for various applications, such as chemical/biological sensing, large-scale logic gates, and neuromorphic computing. However, ensuring long-term operational stability remains a significant challenge that hinders their widespread adoption. While p-type OMIECs are generally more stable than n-type OMIECs, they still face limitations, especially during prolonged operations. Here, we demonstrate that simple methylation of the pyrrole-benzothiazine-based (PBBT) ladder polymer backbone results in stable and high-performance p-type OECTs. The methylated PBBT (PBBT-Me) exhibits a 25-fold increase in OECT mobility and an impressive 36-fold increase in µC* (mobility × volumetric capacitance) compared to the non-methylated PBBT-H polymer. Combining the newly developed PBBT-Me with the ladder n-type poly(benzimidazobenzophenanthroline) (BBL), we developed complementary inverters with a record-high DC gain of 194 V V-1 and excellent stability. These state-of-the-art complementary inverters were used to demonstrate leaky integrate-and-fire type organic electrochemical neurons (LIF-OECNs) capable of biologically relevant firing frequencies of about 2 Hz and of operating continuously for up to 6.5 h. This achievement represents a significant improvement over previous results and holds great potential for developing stable bioelectronic circuits capable of in-sensor computing.
RESUMO
To improve voltage is considered to effectively address the energy-density question of Li||LiCoO2 batteries. However, it is restricted by the instability of electrode electrolyte interphases in carbonate electrolytes, which mainly originates from Li dendrite growth and structural instability of LiCoO2 at high voltage. Herein, an electrolyte additive strategy is proposed for constructing efficient LiNx Oy -contained cathode electrolyte interphase for 4.6 V LiCoO2 and LiF-rich solid electrolyte interphase for Li anode to enhance the stability of Li||LiCoO2 battery using 4-nitrophthalic anhydride as the additive. As expected, the Li||LiCoO2 battery can stably operate up to 4.6 V, with a high specific capacity of 216.9 mAh g-1 during the 1st cycle and a capacity retention of 167.1 mAh g-1 after 200 cycles at 0.3 C. This work provides an available strategy to realize the application of high-voltage Li||LiCoO2 battery.
RESUMO
To increase the red blood cell (RBC) cryopreservation efficiency by metal-organic frameworks (MOFs), a dimensional reduction approach has been proposed. Namely, 3D MOF nanoparticles are progressively reduced to 2D ultra-thin metal-organic layers (MOLs). We found that 2D MOLs are beneficial for enhanced interactions of the interfacial hydrogen-bonded water network and increased utilization of inner ordered structures, due to the higher surface-to-volume ratio. Specifically, a series of hafnium (Hf)-based 2D MOLs with different thicknesses (monolayer to stacked multilayers) and densities of hydrogen bonding sites have been synthesized. Both ice recrystallization inhibition activity (IRI) and RBCs cryopreservation assay confirm the pronounced better IRI activity and excellent cell recovery efficiency (up to ≈63 % at a very low concentration of 0.7â mg mL-1 ) of thin-layered Hf-MOLs compared to their 3D counterparts, thereby verifying the dimensional reduction strategy to improved cryoprotectant behaviors.
Assuntos
Estruturas Metalorgânicas , Estruturas Metalorgânicas/química , Criopreservação/métodos , Crioprotetores/farmacologia , Crioprotetores/química , Gelo , Háfnio/química , EritrócitosRESUMO
Biointegrated neuromorphic hardware holds promise for new protocols to record/regulate signalling in biological systems. Making such artificial neural circuits successful requires minimal device/circuit complexity and ion-based operating mechanisms akin to those found in biology. Artificial spiking neurons, based on silicon-based complementary metal-oxide semiconductors or negative differential resistance device circuits, can emulate several neural features but are complicated to fabricate, not biocompatible and lack ion-/chemical-based modulation features. Here we report a biorealistic conductance-based organic electrochemical neuron (c-OECN) using a mixed ion-electron conducting ladder-type polymer with stable ion-tunable antiambipolarity. The latter is used to emulate the activation/inactivation of sodium channels and delayed activation of potassium channels of biological neurons. These c-OECNs can spike at bioplausible frequencies nearing 100 Hz, emulate most critical biological neural features, demonstrate stochastic spiking and enable neurotransmitter-/amino acid-/ion-based spiking modulation, which is then used to stimulate biological nerves in vivo. These combined features are impossible to achieve using previous technologies.
Assuntos
Elétrons , Polímeros , Neurônios/fisiologia , Transdução de Sinais , SemicondutoresRESUMO
The construction of stable cathode electrolyte interphase (CEI) is the key to improve the NCM811 particle structure and interfacial stability via electrolyte engineering. In He's work, lithium hexamethyldisilazide (LiHMDS) as the electrolyte additive is proposed to facilitate the generation of stable CEI on NCM811 cathode surface and eliminate H2O and HF in the electrolyte at the same time, which boosts the cycling performance of Li||NCM811 battery up to 1000 or 500 cycles with 4.5 V cut-off voltage at 25 or 60 °C.
RESUMO
Short chain fatty acids (SCFAs), crucial intestinal bacterial metabolites, have been widely accepted as potential diagnostic markers in neonatal medicine. Nevertheless, it is still a great challenge to accurately quantify SCFAs in newborn fecal samples due to the huge variation of water content, limited commercial isotope-labeled internal standards and poor sensitivity. In this study, Na2CO3 solution (50 µg/mL) was applied to convert the free SCFAs to SCFA sodium salts, which could prevent the loss of violate SCFAs during lyophilization process. Furthermore, N-methylbenzylamine-d0/d3 was applied as the chemical derivatization regent to enhance the sensitivity and accuracy. Based on this method, the SCFA contents in meconium and neonatal fecal samples were analyzed to illustrate the change of SCFAs during the gut microbiome development. Chemical derivatization based on N-methylbenzylamine-d0/d3 could not only significantly promote the sensitivity (323-1280 folds compared to free SCFAs) by promoting the ionization efficiency, but also provide one-to-one isotope internal standards. Moreover, 7 SCFAs, including acetic acid (2), n-butyric acid (4), isobutyric acid (5), 2-hydroxybutyric acid (11), 2-hydroxy-3-methylbutyric acid (13), 3-hydroxybutyric acid (14), 2-hydroxy-2-methylbutyric acid (17) were found to be significantly increased in neonatal fecal samples compared to the meconium fecal samples. All these results proved that this method could be applied for SCFA analysis in newborn fecal samples with perfect accuracy and sensitivity.
Assuntos
Benzilaminas , Ácidos Graxos Voláteis , Recém-Nascido , Humanos , Cromatografia Gasosa-Espectrometria de Massas , Ácido ButíricoRESUMO
Sodium metal batteries (SMBs) are considered as promising battery system due to abundant Na sources. However, poor compatibility between electrolyte and cathode severely impedes its development. Herein, we proposed an anion/cation solvation strategy for realizing 4.7â V resistant SMBs electrolyte with NaClO4 and trimethoxy(pentafluorophenyl)silane (TPFS) as dual additives (DA). The ClO4 - can rapidly transfer to the cathode surface and strongly coordinate with Na+ to form stable polymer-like chains with solvents. Meanwhile, TPFS can preferentially enter into the PF6 - anion solvation sheath for reducing PF6 -solvent interaction and effectively scavenge adverse electrolyte species for protecting electrode electrolyte interphases. Thus, such electrolyte elevates the oxidative stability of carbonate electrolytes from 3.77 to 4.75â V, and enables Na||Na3 V2 (PO4 )2 O2 F (NVPF) battery with a capacity retention of 93 % and an average Coulombic efficiency (CE) of 99.6 % after 500â cycles at 4.7â V.
RESUMO
Background: Emerging evidence suggests that exercise is a simple and effective method for maintaining brain function. Aims: This review evaluates the effects of five physical exercises, including aerobic training (AT), high-intensity interval training (HIIT), combined training (CT), resistance training (RT), and AT+RT, on the serum level of brain-derived neurotrophic factor (BDNF) in healthy and non-healthy populations. Methods: We searched CNKI, PubMed, Embase, Scopus, Medline, Web of Science, and Cochrane Library databases to review randomized controlled studies on exercise interventions for BDNF. Quantitative merging analysis of the resulting data using Bayesian network meta-analysis. Results: The screening and exclusion of the searched literature resulted in the inclusion of 39 randomized controlled trials containing 5 exercise interventions with a total of 2031 subjects. The AT, RT, AT+RT, HIIT, and CT groups (intervention groups) and the CG group (conventional control group) were assigned to 451, 236, 102, 84, 293, and 865 subjects, respectively. The Bayesian network meta-analysis ranked the effect of exercise on BDNF level improvement in healthy and non-healthy subjects as follows: RT > HIIT > CT > AT+RT > AT > CG. Better outcomes were observed in all five intervention groups than in the CG group, with RT having the most significant effect [MD = 3.11 (0.33, 5.76), p < 0.05]. Conclusions: RT at moderate intensity is recommended for children and older adults in the case of exercise tolerance and is effective in maintaining or modulating BDNF levels for promoting brain health. Systematic Review Registration: https://inplasy.com, INPLASY202250164.
RESUMO
The triple-negative breast cancer (TNBC) microenvironment makes a feature of aberrant vasculature, high interstitial pressure, and compact extracellular matrix, which combine to reduce the delivery and penetration of therapeutic agents, bringing about incomplete elimination of cancer cells. Herein, employing the tumor penetration strategy of size-shrinkage combined with ligand modification, we constructed a photothermal nanocluster for cascaded deep penetration in tumor parenchyma and efficient eradication of TNBC cells. In our approach, the photothermal agent indocyanine green (ICG) is laded in human serum albumin (HSA), which is cross-linked by a thermally labile azo linker (VA057) and then further modified with a tumor homing/penetrating tLyP-1 peptide (HP), resulting in a TNBC-targeting photothermal-responsive size-switchable albumin nanocluster (ICG@HSA-Azo-HP). Aided by the enhanced permeability and retention effect and guidance of HP, the ca. 149 nm nanoclusters selectively accumulate in the tumor site and then, upon mild irradiation with the 808 nm laser, disintegrate into 11 nm albumin fractions that possess enhanced intratumoral diffusion ability. Meanwhile, HP initiates the CendR pathway among the nutrient-deficient tumor cells and facilitates the transcellular delivery of the nanocluster and its disintegrated fractions for subsequent therapy. By employing this size-shrinkage and peptide-initiated transcytosis strategy, ICG@HSA-Azo-HP possesses excellent penetration capabilities and shows extensive penetration depth in three-dimensional multicellular tumor spheroids after irradiation. Moreover, with a superior photothermal conversion effect, the tumor-penetrating nanocluster can implement effective photothermal therapy throughout the tumor tissue under a second robust irradiation. Both in vivo orthotopic and ectopic TNBC therapy confirmed the efficient tumor inhibition of ICG@HSA-Azo-HP after dual-stage irradiation. The synergistic penetration strategy of on-demanded size-shrinkage and ligand guidance accompanied by clinically feasible NIR irradiation provides a promising approach for deep-penetrating TNBC therapy.
Assuntos
Hipertermia Induzida , Nanopartículas , Neoplasias de Mama Triplo Negativas , Albuminas , Animais , Linhagem Celular Tumoral , Humanos , Hipertermia Induzida/métodos , Verde de Indocianina/farmacologia , Ligantes , Camundongos , Camundongos Endogâmicos BALB C , Nanopartículas/metabolismo , Fototerapia/métodos , Terapia Fototérmica , Albumina Sérica Humana , Neoplasias de Mama Triplo Negativas/terapia , Microambiente TumoralRESUMO
High-capacity sodium (Na) anodes suffer from dendrite growth due to the high reactivity, which can be overcome through inducing a stable NaF-rich solid electrolyte interphase (SEI). Herein, we propose an additive strategy for realizing the anion-enriched structure of Na+ solvation to obtain a NaF-rich SEI. The electron-withdrawing acetyl group in 4-acetylpyridine (4-APD) increases the coordination number of PF6 - in the Na+ solvation sheath to facilitate PF6 - to decompose into NaF. Thus, the NaF-rich SEI with high mechanical stability and interfacial energy is formed to repress the growth of Na dendrites. With the 4-APD-contained electrolyte, the symmetric Na||Na cells show excellent cycling performance over 360â h at 1.0â mA cm-2 . Meanwhile, excellent stability is also achieved for Na||Na3 V2 (PO4 )2 O2 F full cells with high Coulombic efficiency (97 %) and capacity retention (91 %) after 200â cycles.
RESUMO
The performance of lithium metal batteries (LMBs) is determined by many factors from the bulk electrolyte to the electrode-electrolyte interphases, which are crucially affected by electrolyte additives. Herein, the authors develop the heptafluorobutyrylimidazole (HFBMZ) as a hexa-functional additive to inhibit the dendrite growth on the surface of lithium (Li) anode, and then improve the cycling performance and rate capabilities of Li||LiNi0.6 Co0.2 Mn0.2 O2 (NCM622). The HFBMZ can remove the trace H2 O and HF from the electrolyte, reducing the by-products on the surface of solid electrolyte interphase (SEI) and inhibiting the dissolution of metal ions from NCM622. Also, the HFBMZ can enhance the wettability of the separator to promote uniform Li deposition. HFBMZ can make Li+ easy to be desolvated, resulting in the increase of Li+ flux on Li anode surface. Moreover, the HFBMZ can optimize the composition and structure of SEI. Therefore, the Li||Li symmetrical cells with 1 wt% HFBMZ-contained electrolyte can achieve stable cycling for more than 1200 h at 0.5 mA cm-2 . In addition, the capacity retention rate of the Li||NCM622 can reach 92% after 150 cycles at 100 mA g-1 .
RESUMO
Lithium-metal batteries have attracted much attention due to their high energy density. However, the hydrolysis of LiPF6 leads to uncontrollable Li dendrites growth and fast capacity fading. Herein, a hydrophobic Li+ -solvated structure is designed by inducing the hexafluoroisopropyl acrylate into the electrolyte system. Due to the alkene groups and non-polar perfluorocarbon (-CF2 CF2 CF3 ) chain, a hydrophobic surface around Li-ion solvated aggregates can be obtained to protect the LiPF6 against the attack from trace H2 O. Moreover, the additive could also help to form an organic solid electrolyte interphase with rich polar C-F bonds, which can capture Li ions to restrain the dendrite growth. Therefore, the Li||Li symmetric cells show a stable cycling performance up to 500â h at a current density of 1â mA cm-2 . The Li||LiNi0.6 Co0.2 Mn0.2 O2 cells show good cycling stability, exhibiting a specific capacity of 111â mAh g-1 at 1â C with a capacity retention of 74 % after 200â cycles.
RESUMO
The safety and electrochemical performance of rechargeable lithium-metal batteries (LMBs) are primarily influenced by the additives in the organic liquid electrolytes. However, multi-functional additives are still rarely reported. Herein, we proposed heptafluorobutyric anhydride (HFA) as a qua-functional additive to optimize the composition and structure of the solid electrolyte interphase (SEI) at the electrode/electrolyte interface. The reduction/oxidation decomposition of the fluorine-rich HFA facilitate uniform inorganic-rich SEI and compact cathode electrolyte interphase (CEI) formation, which enables stable lithium plating during charge and suppresses the dissolution of transition-metal ions. Moreover, HFA optimizes the Li-ion solvation for stable Li plating/stripping and serves as the surfactant to enhance the wettability of the separator by the electrolyte to increase Li-ion flux. The symmetric Liâ¥Li cell with 1.0â wt % HFA electrolyte had an excellent cycling performance over 340â h at 1.0â mA cm-2 with a capacity of 0.5â mAh cm-2 while the Liâ¥NCM622 cell maintained high capacity retention after 250â cycles and outstanding rate performance even at 15â C.
RESUMO
Cell cryopreservation is of vital significance both for transporting and storing cells before experimental/clinical use. Cryoprotectants (CPAs) are necessary additives in the preserving medium in cryopreservation, preventing cells from freeze-thaw injuries. Traditional organic solvents have been widely used in cell cryopreservation for decades. Given the obvious damage to cells due to their undesirable cytotoxicity and the burdensome post-thaw washing cycles before use, traditional CPAs are more and more likely to be replaced by modern ones with lower toxicity, less processing, and higher efficiency. As materials science thrives, nanomaterials are emerging to serve as potent vehicles for delivering nontoxic CPAs or inherent CPAs comparable to or even superior to conventional ones. This review will introduce some advanced nanomaterials (e.g., organic/inorganic nanoCPAs, nanodelivery systems) utilized for cell cryopreservation, providing broader insights into this developing field.