Effect of Cu Intercalation Layer on the Enhancement of Spin-to-Charge Conversion in Py/Cu/Bi2Se3.

The spin-to-charge conversion in Permalloy (Py)/Cu/Bi2Se3 is tunable by changing the Cu layer thickness. The conversion rate was studied using the spin pumping technique. The inverse Edelstein effect (IEE) length λIEE is found to increase up to ~2.7 nm when a 7 nm Cu layer is introduced. Interestingly, the maximized λIEE is obtained when the effective spin-mixing conductance (and thus Js) is decreased due to Cu insertion. The monotonic increase in λIEE with decreasing Js suggests that the IEE relaxation time (τ) is enhanced due to the additional tunnelling barrier (Cu layer) that limits the interfacial transmission rate. The results demonstrate the importance of interface engineering in the magnetic heterostructure of Py/topological insulators (TIs), the key factor in optimizing spin-to-charge conversion efficiency.

Topological Proximity-Induced Dirac Fermion in Two-Dimensional Antimonene.

Antimonene is a promising two-dimensional (2D) material that is calculated to have a significant fundamental bandgap usable for advanced applications such as field-effect transistors, photoelectric devices, and the quantum-spin Hall (QSH) state. Herein, we demonstrate a phenomenon termed topological proximity effect, which occurs between a 2D material and a three-dimensional (3D) topological insulator (TI). We provide strong evidence derived from hydrogen etching on Sb2Te3 that large-area and well-ordered antimonene presents a 2D topological state. Delicate analysis with a scanning tunneling microscope of the evolutionary intermediates reveals that hydrogen etching on Sb2Te3 resulted in the formation of a large area of antimonene with a buckled structure. A topological state formed in the antimonene/Sb2Te3 heterostructure was confirmed with angle-resolved photoemission spectra and density-functional theory calculations; in particular, the Dirac point was located almost at the Fermi level. The results reveal that Dirac fermions are indeed realized at the interface of a 2D normal insulator (NI) and a 3D TI as a result of strong hybridization between antimonene and Sb2Te3. Our work demonstrates that the position of the Dirac point and the shape of the Dirac surface state can be tuned by varying the energy position of the NI valence band, which modifies the direction of the spin texture of Sb-BL/Sb2Te3 via varying the Fermi level. This topological phase in 2D-material engineering has generated a paradigm in that the topological proximity effect at the NI/TI interface has been realized, which demonstrates a way to create QSH systems in 2D-material TI heterostructures.

Double-side operable perovskite photodetector using Cu/Cu2O as a hole transport layer.

In this study, a perovskite is integrated with an ultra-thin Cu/Cu2O (CCO) composite film, a transparent material with high mobility, to achieve a double-side and low-voltage operable photodetector. Compared to photodetectors that utilize metal electrode with perovskite, the use of CCO significantly enhances the photocurrent (from nA up to mA). It acts as a large-scale hole transport layer. The photodetector exhibits high responsivities of 6.79 AW-1 [illuminated via the fluorine-doped tin oxide (FTO) side] and 10.23 AW-1 (illuminated via CCO side). The detectivities obtained at both illuminated sides are as high as over 1011 Jones. Additionally, the Cu/Cu2O-covered perovskite effectively prevents the reaction of perovskite in the interface. This work reveals that the perovskite/CCO heterojunction photodetector can be considered a promising candidate for applications in bifacial-illuminated and flexible/wearable optoelectronic technologies.

Cu/Cu2O nanocomposite films as a p-type modified layer for efficient perovskite solar cells.

Cu/Cu2O films grown by ion beam sputtering were used as p-type modified layers to improve the efficiency and stability of perovskite solar cells (PSCs) with an n-i-p heterojunction structure. The ratio of Cu to Cu2O in the films can be tuned by the oxygen flow ratio (O2/(O2 + Ar)) during the sputtering of copper. Auger electron spectroscopy was performed to determine the elemental composition and chemical state of Cu in the films. Ultraviolet photoelectron spectroscopy and photoluminescence spectroscopy revealed that the valence band maximum of the p-type Cu/Cu2O matches well with the perovskite. The Cu/Cu2O film not only acts as a p-type modified layer but also plays the role of an electron blocking buffer layer. By introducing the p-type Cu/Cu2O films between the low-mobility hole transport material, spiro-OMeTAD, and the Ag electrode in the PSCs, the device durability and power conversion efficiency (PCE) were effectively improved as compared to the reference devices without the Cu/Cu2O interlayer. The enhanced PCE is mainly attributed to the high hole mobility of the p-type Cu/Cu2O film. Additionally, the Cu/Cu2O film serves as a protective layer against the penetration of humidity and Ag into the perovskite active layer.

Interface-induced spin Hall magnetoresistance enhancement in Pt-based tri-layer structure.

In this study, we integrated bilayer structure of covered Pt on nickel zinc ferrite (NZFO) and CoFe/Pt/NZFO tri-layer structure by pulsed laser deposition system for a spin Hall magnetoresistance (SMR) study. In the bilayer structure, the angular-dependent magnetoresistance (MR) results indicate that Pt/NZFO has a well-defined SMR behavior. Moreover, the spin Hall angle and the spin diffusion length, which were 0.0648 and 1.31 nm, respectively, can be fitted by changing the Pt thickness in the longitudinal SMR function. Particularly, the MR ratio of the bilayer structure (Pt/NZFO) has the highest changing ratio (about 0.135%), compared to the prototype structure Pt/Y3Fe5O12 (YIG) because the NZFO has higher magnetization. Meanwhile, the tri-layer samples (CoFe/Pt/NZFO) indicate that the MR behavior is related with CoFe thickness as revealed in angular-dependent MR measurement. Additionally, comparison between the tri-layer structure with Pt/NZFO and CoFe/Pt bilayer systems suggests that the SMR ratio can be enhanced by more than 70%, indicating that additional spin current should be injected into Pt layer.

Heterostructured ferromagnet-topological insulator with dual-phase magnetic properties.

The introduction of ferromagnetism at the surface of a topological insulator (TI) produces fascinating spin-charge phenomena. It has been assumed that these fascinating effects are associated with a homogeneous ferromagnetic (FM) layer possessing a single type of magnetic phase. However, we obtained phase separation within the FM layer of a Ni80Fe20/Bi2Se3 heterostructure. This phase separation was caused by the diffusion of Ni into Bi2Se3, forming a ternary magnetic phase of Ni:Bi2Se3. The inward diffusion of Ni led to the formation of an FeSe phase outward, transforming the original Ni80Fe20/Bi2Se3 into a sandwich structure comprising FeSe/Ni:Bi2Se3/Bi2Se3 with dual-phase magnetic characteristics similar to that driven by the proximity effect. Such a phenomenon might have been overlooked in previous studies with a strong focus on the proximity effect. X-ray magnetic spectroscopy revealed that FeSe and Ni:Bi2Se3 possess horizontal and perpendicular magnetic anisotropy, respectively. The overall magnetic order of the heterostructure can be easily tuned by adjusting the thickness of the Bi2Se3 as it compromises the magnetic orders of the two magnetic phases. This discovery is essential to the quantification of spin-charge phenomena in similar material combinations where the FM layer is composed of multiple elements.

Proximity Effect induced transport Properties between MBE grown (Bi1-xSbx)2Se3 Topological Insulators and Magnetic Insulator CoFe2O4.

In this study, we investigate the proximity effect in topological insulator (TI) and magnetic insulator bilayer system. (Bi1-xSbx)2Se3/CoFe2O4 (CFO) heterostructure was fabricated using molecular beam epitaxy and pulsed laser deposition system respectively. As revealed from the magnetoresistance measurement, the weak anti-localization (WAL) is strongly suppressed by proximity effect in (Bi1-xSbx)2Se3/CFO interface. Modified Hikama-Larkin-Nagaoka equation was used to fit the WAL results so that the size of surface state gap can be extracted successfully. The temperature-dependent resistance of the heterostructures at small and large perpendicular magnetic fields were also measured and analyzed. The results indicate that the surface band gap can be induced in TI and continuously enlarged up to 9 T, indicating the gradual alignment of the magnetic moment in CFO under perpendicular magnetic field. The approaches and results accommodated in this work show that CFO can effectively magnetize (Bi1-xSbx)2Se3 and the heterostructures are promising for TI-based spintronic device applications.

Ultrathin (Bi1-xSbx)2Se3 Field Effect Transistor with Large ON/OFF Ratio.

Ultrathin three-dimensional topological insulator films are promising for use in field effect devices. (Bi1-xSbx)2Se3 ultrathin films were fabricated on SrTiO3 substrate, where large resistance changes of ∼25 000% could be achieved using the back gate voltage. We suggest that the large ON/OFF ratio was caused by the combined effect of Sb-doping and the reduction of film thickness down to the ultrathin regime. The crossover of different quantum transport under an electric field may form the basis for topological insulators (TI)-based spin transistors with large ON/OFF ratios in the future.

Substrate-induced structures of bismuth adsorption on graphene: a first principles study.

The geometric and electronic properties of Bi-adsorbed monolayer graphene, enriched by the strong effect of a substrate, are investigated by first-principles calculations. The six-layered substrate, corrugated buffer layer, and slightly deformed monolayer graphene are all simulated. Adatom arrangements are thoroughly studied by analyzing the ground-state energies, bismuth adsorption energies, and Bi-Bi interaction energies of different adatom heights, inter-adatom distance, adsorption sites, and hexagonal positions. A hexagonal array of Bi atoms is dominated by the interactions between the buffer layer and the monolayer graphene. An increase in temperature can overcome a ∼50 meV energy barrier and induce triangular and rectangular nanoclusters. The most stable and metastable structures agree with the scanning tunneling microscopy measurements. The density of states exhibits a finite value at the Fermi level, a dip at ∼-0.2 eV, and a peak at ∼-0.6 eV, as observed in the experimental measurements of the tunneling conductance.