RESUMO
In the emergency department, it is important to rapidly identify the toxic substances that have led to acute poisoning because different toxicants or toxins cause poisoning through different mechanisms, requiring disparate therapeutic strategies and precautions against contraindicating actions, and diverse directions of clinical course monitoring and prediction of prognosis. Ambient ionization mass spectrometry, a state-of-the-art technology, has been proved to be a fast, accurate, and user-friendly tool for rapidly identifying toxicants like residual pesticides on fruits and vegetables. In view of this, developing an analytical platform that explores the application of such a cutting-edge technology in a novel direction has been initiated a research program, namely, the rapid identification of toxic substances which might have caused acute poisoning in patients who visit the emergency department and requires an accurate diagnosis for correct clinical decision-making to bring about corresponding data-guided management. This review includes (i) a narrative account of the breakthrough in emergency toxicology brought about by the advent of ambient ionization mass spectrometry and (ii) a thorough discussion about the clinical implications and technical limitations of such a promising innovation for promoting toxicological tests from tier two-level to tier one level.
RESUMO
Flame-induced atmospheric pressure chemical ionization (FAPCI) has been used to directly characterize chemical compounds on a glass rod and drug tablet surfaces. In this study, FAPCI was further applied to interface thin layer chromatography (TLC) and mass spectrometry (MS) for mixture analysis. METHODS: A micro-sized oxyacetylene flame was generated using a small concentric tube system. Hot gas flow and primary reactive species from the micro-flame were directed toward a developed TLC gel plate to thermally desorb and ionize analytes on the gel surface. The resulting analyte ions subsequently entered the MS inlet for detection. RESULTS: A 1-1.5-mm-wide light-brown line was observed on the TLC plate after the desorption FAPCI/MS (DFAPCI/MS) analysis, revealing that the gel surface withstood a high temperature from the impact of the micro-flame. Volatile and semi-volatile chemical compounds, including amine and amide standards, drugs, and aromatherapy oils, were successfully desorbed, ionized, and detected using this TLC/DFAPCI/MS. The limit of detection of TLC-DFAPCI/MS was determined to be 5 ng/spot for dibenzylamine and ethenzamide. CONCLUSIONS: TLC/DFAPCI/MS is one of the simplest TLC-MS interfaces showing the advantages such as low costs and an easy set up. The technique is useful for characterizing thermally stable volatile and semi-volatile compounds in a mixture.
Assuntos
Pressão Atmosférica , Cromatografia em Camada Fina/métodos , Espectrometria de Massas/métodos , ComprimidosRESUMO
Ambient mass spectrometry thermal desorption-electrospray ionization/mass spectrometry (TD-ESI/MS) can rapidly identify chemicals without pretreatment of biological samples. This study used a rapid semi-quantitative TD-ESI/MS screening technique for the probe skin sampling of melamine workers occupationally exposed to different ambient melamine concentrations to create avatar-like body images, which were then used to study temporal and dynamic changes in nephrotoxic melamine exposure. We enrolled four voluntary melamine workers from one factory, each from one of four worksites. Melamine exposure was highest in manufacturing and molding, followed by grinding and polishing, packing, and administration, the lowest. Skin samples were collected Friday (end-of-shift) and Monday (pre-shift). Early morning one-spot urine samples were also collected right after skin sampling. 2198 probe skin samples were collected and subjected to semi-quantitative TD-ESI/MS analyses of melamine chemical within 40 h. After normalization, converted body image scores revealed exposure to be highest in the manufacturing worker on Friday and lowest in the administrative worker on Monday. The absolute differences (Friday minus Monday) of normalized body image scores were all significantly positive in each individual worker and across all four workers (permutation test, all p-values < 0.002). The slope estimates of the linear regression line between body image scores and urinary melamine levels were 0.81 (p-value = 0.008). We concluded that this fast and non-invasive technique can potentially be used to study temporal and dynamic changes in exposure to occupational hazards. A future study of developing an automatic and reproducible TD-ESI/MS sampling platform is needed.
Assuntos
Espectrometria de Massas por Ionização por Electrospray , Triazinas , Humanos , Modelos Lineares , Espectrometria de Massas por Ionização por Electrospray/métodos , Espectrometria de Massas em Tandem/métodosRESUMO
A simple flame-induced atmospheric pressure chemical ionization (FAPCI) source was developed to couple a gas chromatograph (GC) with a mass spectrometer (MS). The interface consisted of a heated transfer line and a high voltage-free ambient FAPCI source. Nitrogen gas flowing through the heated transfer line was utilized to deliver the analytes eluted from a GC column to the ionization region. A micro oxyacetylene flame was positioned under the exit of heated transfer line, which generated primary charged species in the ionization region. Since the temperature at the ionization region was below 200 °C, the analytes were not thermally decomposed. Protonated analytes were formed by reacting the analytes with flame-induced charged species through ion-molecule reactions (IMRs). The simple GC-FAPCI/MS was used to characterize a series of fatty acid methyl esters (FAMEs) and long-chain normal alkanes, which showed protonated FAME and oxidized n-alkane ions on the mass spectra. The limits of detection (LODs) for C15:0 to C25:0 FAMEs were 1-2.5 pg. A calibration curve ranging from 2.5 to 500 pg, with a R2 value of 0.9821, was obtained.
Assuntos
Pressão Atmosférica , Ácidos Graxos , Ésteres/análise , Ácidos Graxos/análise , Cromatografia Gasosa-Espectrometria de Massas/métodos , Hidrocarbonetos , Espectrometria de MassasRESUMO
Squalene (SQ), a highly unsaturated sebaceous lipid, plays an important role in protecting human skin. To better understand the role of SQ in clinical medicine, an efficient analytical approach is needed to comprehensively study the distribution of SQ on different parts of the skin. In this study, sebaceous lipids were collected from different epidermal areas of a volunteer with sampling probes. Thermal desorption-electrospray ionization/mass spectrometry (TD-ESI/MS) was then used to characterize the lipid species on the probes, and each TD-ESI/MS analysis was completed within a few seconds without any sample pretreatment. The molecular mapping of epidermal squalene on whole-body skin was rendered by scaling the peak area of the extracted ion current (EIC) of SQ based on a temperature color gradient, where colors were assigned to the 1357 sampling locations on a 3D map of the volunteer. The image showed a higher SQ distribution on the face than any other area of the body, indicating the role of SQ in protecting facial skin. The results were in agreement with previous studies using SQ as a marker to explore sebaceous activity. The novelty and significance of this work are concluded as two points: (1) direct and rapid detection of all major classes of sebaceous lipids, including the unsaturated hydrocarbons (SQ) and nonpolar lipids (e.g., cholesterol). The results are unique compared to other conventional and ambient ionization mass spectrometry methods and (2) this is the first study to analyze SQ distribution on the whole-body skin by a high-throughput approach.
Assuntos
Epiderme , Esqualeno , Humanos , Lipídeos , Espectrometria de Massas , PeleRESUMO
Phthalates are known endocrine disruptors that can have adverse effects on human hormonal balance and development. Phthalates are semi-volatile chemical compounds, thus they can continuously leach from phthalate-containing objects and pollute the environments such as offices or laboratories, where workers in these spaces can inhale potentially harmful amounts of phthalates. Identifying and removing phthalate-contaminated objects from these indoor environments can effectively eliminate exposure to these environmental hormones. However, as of now, it is highly impractical to perform a large-scale screening of phthalate-containing objects using conventional analytical techniques which are usually time- and labor-intensive. In this study, thermal desorption electrospray ionization mass spectrometry (TD-ESI/MS) combined with probe sampling was used to screen phthalates on all non-metallic objects in a mass spectrometry (MS) laboratory. Due to sample pre-treatment was unnecessary and there was no limitation of sampling on sample's shape, size, and material, screening of phthalates on an object using this ambient mass spectrometric approach was completed within 30 s, which enable sufficient and high-throughput screening. Phthalate signals of di(2-ethylhexyl)phthalate (DEHP), diisononyl phthalate (DINP) and diisodecyl phthalate (DIDP) were qualitatively detected on the surfaces of the filters of air conditioners and air purifiers and laboratory door, indicating there was a possibility of phthalates contamination in the studying area. Other screened objects in the laboratory included the ceiling, wall, floor, chairs, benches, pipes, mechanical vacuum pump tubes, and some personal belongings, all of which contained phthalates. Among them, floor and mechanical vacuum pump tubes contained high concentration of DEHP, DINP and DIDP, suggesting they were the main sources of phthalate contamination in the MS laboratory.
RESUMO
Multiple solid phase microextraction (mSPME) combined with thermal desorption-electrospray ionization/mass spectrometry (TD-ESI/MS) was developed to rapidly characterize trace analytes in aqueous solution. A number of commercial available SPME fibers (from 2 to 10 fibers) were simultaneously used for extracting the analytes in solution. The fibers were then bundled together on a holder and subjected for the ambient mass spectrometric analysis. Good linearity for calibration (R2 = 0.9995) and low limit of quantification (<1 ppb) were achieved by using 10 SPME fibers coated with polyacrylate (PA) to extract bisphenol A. It was also found that the analyte signals increased with the number of SPME fibers for extraction. Uncontroversial, a shorter extraction time was required by using mSPME to reach the same level of analyte signal as that by using single SPME fiber for a longer extraction time. Trace bisphenol A (4-20 ppb) in the polycarbonate (PC) baby milk bottles was rapidly detected using mSPME-TD-ESI/MS and the analysis was completed within 1 min. The use of multiple SPME fibers coated with different materials enable the concentration of different type of analytes in the solution. Ibuprofen, bisphenol A (BPA), and 4-n-nonylphenol (4-n-NP) were simultaneously detected by using PA and polydimethylsiloxane (PDMS) coated fibers for extraction.
RESUMO
High-throughput screening of plastic products in children's living environment is necessary to identify phthalate-containing objects for the concern of public health and safety. A novel strategy of probe collecting technique combined with ambient mass spectrometry was developed to carry out the large-scale sample analysis. Analytes from the surface of approximately 500 objects each in two kindergartens in Taiwan were collected using the same number of the metallic probes. After being delivered to laboratory, the analytes on the probes were analyzed with thermal desorption-electrospray ionization/mass spectrometry (TD-ESI/MS). As sample pretreatment was unnecessary, the analysis of phthalates on a probe was completed within 30â¯s enabling high-throughput screening of a large number of objects. All procedure including sampling and TD-ESI/MS analysis together with report writing for a kindergarten was completed in one day. A reasonable relative standard deviation (<15.6%) was obtained from replicate analyses of phthalate standards. Single-point calibration was used to perform semi-quantitative analysis, and results were validated by liquid chromatography/mass spectrometry (LC/MS). It was found that 20-40% of the objects in two kindergartens contained greater than low-level (>2â¯ng) of phthalates and 40-60% of the objects in the kindergartens contained more than one kind of phthalate.
Assuntos
Ensaios de Triagem em Larga Escala/métodos , Espectrometria de Massas/métodos , Ácidos Ftálicos/análise , Pré-Escolar , Humanos , Instituições Acadêmicas , TaiwanRESUMO
Labor- and time-intensive sample preparation and liquid chromatography mass spectrometry (LC-MS) analysis are required for traditional pharmacokinetics (PK) studies. In order to simplify and accelerate the analytical process of the PK study, solid phase microextraction (SPME) combined with thermal desorption-electrospray ionization/mass spectrometry (TD-ESI/MS) was developed for rapid characterization of trace drug in biological fluids. Methylphenidate in plasma was extracted and concentrated by direct immersion SPME using fused-silica fibers coated with polydimethylsiloxane. The analytes on the SPME fiber were then characterized by TD-ESI/MS. Matrix-matched calibration with multiple reaction monitoring analysis was conducted to quantify methylphenidate. A linear calibration curve was constructed over a concentration range of 0.2-25â¯ngâ¯mL-1 (râ¯=â¯0.997). The quantitative results obtained by SPME-TD-ESI/MS were validated by LC-MS/MS. The average relative error for both methods was found to be -5.3%. As a viable alternative to LC-MS, SPME-TD-ESI/MS enables simple, rapid, and high-throughput analysis of drugs in plasma. The developed approach is particularly beneficial to PK studies for a very small sample volume (10⯵L) is needed, the extraction time is as short as 3â¯min, and the detection time is less than 30â¯s.
Assuntos
Ensaios de Triagem em Larga Escala , Metilfenidato/farmacocinética , Microextração em Fase Sólida , Temperatura , Calibragem , Humanos , Metilfenidato/sangue , Espectrometria de Massas por Ionização por ElectrosprayRESUMO
RATIONALE: Conventional mass spectrometry is encumbered by laborious and inconvenient sample pretreatment. Ambient thermal desorption electrospray ionization mass spectrometry (TD-ESI-MS) is most noted for its rapid, simple, and sensitive detection capabilities. In this study, TD-ESI-MS was used to rapidly characterize residual pesticides on the surfaces of fruits and vegetables. METHODS: A direct sampling probe was used to obtain analytes from sample surfaces. MS and MS/MS analyses were performed on fruits and vegetables via TD-ESI-MS. External calibration curves and reproducibility tests were performed using liquid pesticide standards. Pesticide decay and distribution on samples was studied, as well as the removal of residual pesticides via soaking in water or detergent baths. RESULTS: Since sample pretreatment was unnecessary, an analysis was completed in approximately 15 s or less, with no visible sample damage. Mass spectra were obtained for 22 pesticides. Linear calibrations (R(2) from 0.9414-0.999) had limits of detection as low as 0.5 µg·L(-1), with satisfactory reproducibilities for liquids and solids. Pesticides on sample surfaces decayed over 2 weeks under ambient conditions. Residual pesticides localized at the fruit peel. Detergent baths removed more pesticide than water baths. CONCLUSIONS: TD-ESI-MS was used to rapidly screen residual pesticides in liquids and solids. Pesticides were found on fruits and vegetables, where the decay, distribution, and removal of pesticides on samples were also explored. Due to short analysis times, the technique allows for high-throughput analyses for applications in food and environmental safety.
Assuntos
Frutas/química , Resíduos de Praguicidas/análise , Espectrometria de Massas por Ionização por Electrospray/métodos , Verduras/química , Reprodutibilidade dos Testes , Espectrometria de Massas em Tandem , ÁguaRESUMO
A dual ionization source combining electrospray ionization (ESI) and atmospheric pressure chemical ionization (APCI) was developed to simultaneously ionize both polar and nonpolar compounds. The source was constructed by inserting a fused silica capillary into a stainless steel column enclosed in a glass tube. A high dc voltage was applied to a methanol solution flowing in the fused silica capillary to generate an ESI plume at the capillary tip. A high ac voltage was applied to a ring electrode attached to the glass tube to generate plasma from the nitrogen gas flowing between the glass tube and the stainless steel column. The concentric arrangement of the ESI plume and the APCI plasma in the source ensured that analytes entering the ionization region interacted with both ESI and APCI primary ion species generated in the source. Because the high voltages required for ESI and APCI were independently applied and controlled, the dual ion source could be operated in ESI-only, APCI-only, or ESI+APCI modes. Analytes were introduced into the ESI and/or APCI plumes by irradiating sample surfaces with a continuous-wavelength laser or a pulsed laser beam. Analyte ions could also be produced by directing the dual ESI+APCI source toward sample surfaces for desorption and ionization. The ionization mechanisms involved in the dual ion source include Penning ionization, ion molecule reactions, and fused-droplet electrospray ionization. Standards of polycyclic aromatic hydrocarbons, angiotensin I, lidocaine, ferrocene, diesel, and rosemary oils were used for testing. Protonated analyte ions were detected in ESI-only mode, radical cations were detected in APCI-only mode, and both types of ions were detected in ESI+APCI mode.
Assuntos
Compostos Ferrosos/análise , Fragmentos de Peptídeos/análise , Óleos de Plantas/análise , Hidrocarbonetos Policíclicos Aromáticos/análise , Espectrometria de Massas por Ionização por Electrospray/métodos , Pressão Atmosférica , Cromatografia Líquida de Alta Pressão , Humanos , Metalocenos , Espectrometria de Massas por Ionização por Electrospray/instrumentaçãoRESUMO
The use of an ambient ionization mass spectrometry technique known as electrospray laser desorption ionization mass spectrometry (ELDI/MS) for molecular imaging is described in this section. The technique requires little or no sample pretreatment and the application of matrix on sample surfaces is unnecessary. In addition, the technique is highly suitable for the analysis of hard and thick tissues compared to other molecular imaging methods because it does not require production of thin tissue slices via microtomes, which greatly simplifies the overall sample preparation procedure and prevents the redistribution of analytes during matrix desorption. In this section, the ELDI/MS technique was applied to the profiling and imaging of chemical compounds on the surfaces of dry plant slices. Analyte distribution on plant slices was obtained by moving the sample relative to a pulsed laser and an ESI capillary for analyte desorption and post-ionization, respectively. Images of specific ions on sample surfaces with resolutions of 250 µm were typically created within 4.2 h for tissues with sizes of approximately 57 mm × 10 mm.
Assuntos
Lasers , Imagem Molecular/métodos , Espectrometria de Massas por Ionização por Electrospray/métodos , Rosales/citologiaRESUMO
RATIONALE: The elucidation of chemical reaction mechanisms has attracted tremendous interest in recent years. Here, gravitational sampling electrospray ionization mass spectrometry (GS-ESI-MS) is used to explore a simple method for the real-time monitoring of chemical and biochemical reactions. METHODS: A sample solution in a stainless steel sample well is directly delivered through a fused-silica capillary due to the forces of gravity, capillary action, and electroosmotic flow (EOF). Analyte ions are continuously generated via electrospray ionization from the capillary tip when a high voltage is applied on the sample well. RESULTS: Liquid solutions (<5 µL) of small organic compounds (e.g., crystal violet) and large biomolecules (e.g., reserpine, angiotensin II, and insulin) were directly analyzed via GS-ESI-MS. In addition, the technique was successfully applied to continuously monitor chemical [e.g. chelation of ethylenediaminetetraacetic acid (EDTA) with copper(II), and addition-elimination of aminophenol and acetic anhydride] and biochemical (e.g., unfolding of cytochrome c) reactions in real time, where chelation complexes, reaction intermediates, and protein conformation changes were observed. CONCLUSIONS: GS-ESI-MS is a very simple modification of the ESI technique that does not require sample delivery pumps or nebulizer gases. It is particularly suitable for the analysis of liquid samples and the real-time monitoring of inorganic/organic chemical or biochemical reactions.
Assuntos
Espectrometria de Massas por Ionização por Electrospray/métodos , Gravitação , Íons/química , Modelos Químicos , Compostos Orgânicos/química , Espectrometria de Massas por Ionização por Electrospray/instrumentaçãoRESUMO
Electrospray laser desorption ionization mass spectrometry (ELDI/MS) allows the rapid desorption and ionization of proteins from solutions under ambient conditions. In this study, we have demonstrated the use of ELDI/MS to efficiently examine the integrity of the proteins stored in various solutions before they were further used for other biochemical tests. The protein standards were prepared in the solutions containing buffers, organic salts, inorganic salts, strong acid, strong base, and organic solvents, respectively, to simulate those collected from solvent extraction, filtration, dialysis, or chromatographic separation. Other than the deposit of a drop of the sample solution on the metallic sample plate in an ELDI source, no additional sample pretreatment is needed. The sample drop was then irradiated with a pulsed laser; this led to desorption of the analyte molecules, which subsequently entered the ESI plume to undergo post-ionization. Because adjustment of the composition of the sample solution is unnecessary, this technique appears to be useful for rapidly evaluating the integrity of proteins after storage or prior to further biochemical treatment. In addition, when using acid-free and low-organic-solvent ESI solutions for ELDI/MS analysis, the native conformations of the proteins in solution could be detected.
Assuntos
Citocromos c/análise , Mioglobina/análise , Animais , Soluções Tampão , Bovinos , Concentração de Íons de Hidrogênio , Estabilidade Proteica , Soluções , Espectrometria de Massas por Ionização e Dessorção a Laser Assistida por MatrizRESUMO
Rapid characterization of thermally stable chemical compounds in solid or liquid states is achieved through thermal desorption electrospray ionization mass spectrometry (TD-ESI/MS). A feature of this technique is that sampling, desorption, ionization, and mass spectrometric detection are four separate events with respect to time and location. A metal probe was used to sample analytes in their solid or liquid states. The probe was then inserted in a preheated oven to thermally desorb the analytes on the probe. The desorbed analytes were carried by a nitrogen gas stream into an ESI plume, where analyte ions were formed via interactions with charged solvent species generated in the ESI plume. The analyte ions were subsequently detected by a mass analyzer attached to the TD-ESI source. Quantification of acetaminophen in aqueous solutions using TD-ESI/MS was also performed in which a linear response for acetaminophen was obtained between 25 and 500 ppb (R(2) = 0.9978). The standard deviation for a reproducibility test for ten liquid samples was 9.6%. Since sample preparation for TD-ESI/MS is unnecessary, a typical analysis can be completed in less than 10 s. Analytes such as the active ingredients in over-the-counter drugs were rapidly characterized regardless of the different physical properties of said drugs, which included liquid eye drops, viscous cold syrup solution, ointment cream, and a drug tablet. This approach was also used to detect trace chemical compounds in illicit drugs and explosives, in which samples were obtained from the surfaces of a cell phone, piece of luggage made from hard plastic, business card, and wooden desk.
Assuntos
Preparações Farmacêuticas/análise , Preparações Farmacêuticas/química , Espectrometria de Massas por Ionização por Electrospray/métodos , TemperaturaRESUMO
The electrospray Laser desorption/ionization (ELDI) method is actively used for direct sample analysis and ambient mass spectrometry imaging. The optimizing of Laser desorption conditions is essential for this technology. In this work, we propose using a metal target with a black oxide (Fe3O4) coating to increase the signal in ELDI-MS for peptides and small proteins. The experiments were performed on an LTQ-FT mass spectrometer equipped with a home-made ELDI ion source. A cutter blade with black oxide coating was used as a target. A nitrogen laser was used with the following parameters: 337 nm, pulse duration 4ns, repetition rate 10 Hz, fluence to approximately 700 Jm(-2). More than a five times signal increase was observed for a substance P peptide when a coated and a non-coated metal target were compared. No ion signal was observed for proteins if the same fluence and the standard stainless steel target were used. With the assistance of the Fe3O4 coated metal target and a relatively low laser fluence < or =700 Jm(-2)), proteins such as insulin, ubiquitin and myoglobin were successfully ionized. It was demonstrated that the Fe3O4-coated metal target can be used efficiently to assist laser desorption and thus significantly increase the analyte signal in ELDI-MS. A relatively low laser fluence (< or = 700 Jm(-2)) was enough to desorb peptides and proteins (up to 17 kDal with the assistance of the Fe3O4-coated metal target under ambient conditions.
Assuntos
Óxido Ferroso-Férrico/química , Espectrometria de Massas por Ionização por Electrospray/instrumentação , Desenho de Equipamento , Lasers , Peptídeos/análise , Proteínas/análiseRESUMO
Interfacing thin layer chromatography (TLC) with ambient mass spectrometry (AMS) has been an important area of analytical chemistry because of its capability to rapidly separate and characterize the chemical compounds. In this study, we have developed a high-throughput TLC-AMS system using building blocks to deal, deliver, and collect the TLC plate through an electrospray-assisted laser desorption ionization (ELDI) source. This is the first demonstration of the use of building blocks to construct and test the TLC-MS interfacing system. With the advantages of being readily available, cheap, reusable, and extremely easy to modify without consuming any material or reagent, the use of building blocks to develop the TLC-AMS interface is undoubtedly a green methodology. The TLC plate delivery system consists of a storage box, plate dealing component, conveyer, light sensor, and plate collecting box. During a TLC-AMS analysis, the TLC plate was sent to the conveyer from a stack of TLC plates placed in the storage box. As the TLC plate passed through the ELDI source, the chemical compounds separated on the plate would be desorbed by laser desorption and subsequently postionized by electrospray ionization. The samples, including a mixture of synthetic dyes and extracts of pharmaceutical drugs, were analyzed to demonstrate the capability of this TLC-ELDI/MS system for high-throughput analysis.
RESUMO
Ambient ionization is a set of mass spectrometric ionization techniques performed under ambient conditions that allows the direct analysis of sample surfaces with little or no sample pretreatment. Using combinations of different types of sample introduction systems and ionization methods, several novel techniques have been developed over the last few years with many applications (e.g., food safety screening; detection of pharmaceuticals and drug abuse; monitoring of environmental pollutants; detection of explosives for antiterrorism and forensics; characterization of biological compounds for proteomics and metabolomics; molecular imaging analysis; and monitoring chemical and biochemical reactions). Electrospray ionization and atmospheric pressure chemical ionization are the two main ionization principles most commonly used in ambient ionization mass spectrometry. This tutorial paper provides a review of the publications related to ambient ionization techniques. We describe and compare the underlying principles of operation, ionization processes, detecting mass ranges, sensitivity, and representative applications of these techniques.
Assuntos
Espectrometria de Massas por Ionização por Electrospray/instrumentação , Espectrometria de Massas por Ionização por Electrospray/métodos , Espectrometria de Massas por Ionização e Dessorção a Laser Assistida por Matriz/instrumentação , Espectrometria de Massas por Ionização e Dessorção a Laser Assistida por Matriz/métodos , Ionização do Ar , Pressão Atmosférica , Substâncias Explosivas/análise , Ciências Forenses , Metabolômica , Preparações Farmacêuticas/análise , Proteômica , Sensibilidade e EspecificidadeRESUMO
Thin layer chromatography (TLC)--a simple, cost-effective, and easy-to-operate planar chromatographic technique--has been used in general chemistry laboratories for several decades to routinely separate chemical and biochemical compounds. Traditionally, chemical and optical methods are employed to visualize the analyte spots on the TLC plate. Because direct identification and structural characterization of the analytes on the TLC plate through these methods are not possible, there has been long-held interest in the development of interfaces that allow TLC to be combined with mass spectrometry (MS)--one of the most efficient analytical tools for structural elucidation. So far, many different TLC-MS techniques have been reported in the literature; some are commercially available. According to differences in their operational processes, the existing TLC-MS systems can be classified into two categories: (i) indirect mass spectrometric analyses, performed by scraping, extracting, purifying, and concentrating the analyte from the TLC plate and then directing it into the mass spectrometer's ion source for further analysis; (ii) direct mass spectrometric analyses, where the analyte on the TLC plate is characterized directly through mass spectrometry without the need for scraping, extraction, or concentration processes. Conventionally, direct TLC-MS analysis is performed under vacuum, but the development of ambient mass spectrometry has allowed analytes on TLC plates to be characterized under atmospheric pressure. Thus, TLC-MS techniques can also be classified into two other categories according to the working environment of the ion source: vacuum-based TLC-MS or ambient TLC-MS. This review article describes the state of the art of TLC-MS techniques used for indirect and direct characterization of analytes on the surfaces of TLC plates.
Assuntos
Cromatografia em Camada Fina/instrumentação , Cromatografia em Camada Fina/métodos , Espectrometria de Massas/instrumentação , Espectrometria de Massas/métodos , Cromatografia em Camada Fina/normas , Espectrometria de Massas/normas , Reprodutibilidade dos Testes , Sensibilidade e EspecificidadeRESUMO
Mass spectrometric ionization methods that operate under ambient conditions and require minimal or no sample pretreatment have attracted much attention in such fields as biomedicine, food safety, antiterrorism, pharmaceuticals, and environmental pollution. These technologies usually involve separate ionization and sample-introduction events, allowing independent control over each set of conditions. Ionization is typically performed under ambient conditions through use of existing electrospray ionization (ESI) or atmospheric pressure chemical ionization (APCI) techniques. Rapid analyses of gas, liquid, and solid samples are possible with the adoption of various sample-introduction methods. This review sorts different ambient ionization techniques into two main subcategories, primarily on the basis of the ionization processes, that are further differentiated in terms of the approach used for sampling.