Immobilization of Air-Stable Copper Nanoparticles on Graphene Oxide Flexible Hybrid Films for Smart Clothes.

Through the use of organic/inorganic hybrid dispersants-which are composed of polymeric dispersant and two-dimension nanomaterial graphene oxide (GO)-copper nanoparticles (CuNPs) were found to exhibit nano stability, air-stable characteristics, as well as long-term conductive stability. The polymeric dispersant consists of branched poly(oxyethylene)-segmented esters of trimellitic anhydride adduct (polyethylene glycol-trimethylolpropane-trimellitic anhydride, designated as PTT). PTT acts as a stabilizer for CuNPs, which are synthesized via in situ polymerization and redox reaction of the precursor Cu(CH3COO)2 within an aqueous system, and use graphene oxide to avoid the reduction reaction of CuNPs. The results show that after 30 days of storage the CuNPs/PTT/GO composite film maintains a highly conductive network (9.06 × 10-1 Ω/sq). These results indicate that organic/inorganic PTT/GO hybrid dispersants can effectively maintain the conductivity stability of CuNPs and address the problem of CuNP oxidation. Finally, the new CuNPs/PTT/GO composite film was applied to the electrocardiogram (ECG) smart clothes. This way, a stable and antioxidant-sensing electrode can be produced, which is expected to serve as a long-term ECG monitoring device.

Facile Fabrication of Flexible Electrodes and Immobilization of Silver Nanoparticles on Nanoscale Silicate Platelets to Form Highly Conductive Nanohybrid Films for Wearable Electronic Devices.

This study investigated films with remarkably high electrical conductivity after they were easily prepared from organic/inorganic nanohybrid solutions containing an organic polymeric dispersant and two-dimensional nanoscale silicate platelets as the inorganic stabilizer dispersed with silver nanoparticles. Transmission electron microscopy shows that the production of silver nanoparticles synthesized by the in situ chemical reduction of AgNO3 in an aqueous solution by N,N-dimethylformamide results in an average silver nanoparticle diameter of circa 20 nm. Thin films of silver nanoparticles were prepared on a 1-µm-thick film with a low sheet resistance of 8.24 × 10-4 Ω/sq, achieved through the surface migration of silver nanoparticles and prepared by sintering at 300 °C to form an interconnected network. This was achieved with a silver nanoparticle content of 5 wt%, using nanoscale silicate platelets/polyoxyethylene-segmented polyimide/AgNO3 at a weight ratio of 1:10:35. During sintering, the color of the hybrid film changed from gold to milky white, suggesting the migration of silver nanoparticles and the formation of an interconnected network. The results show promise for the fabrication of novel silver-based electrocardiogram electrodes and a flexible wireless electrocardiogram measurement system for wearable electronics.