Synergistic Effects of Interfacial Energy Level Regulation and Stress Relaxation via a Buried Interface for Highly Efficient Perovskite Solar Cells.

An electron-transport layer with appropriate energy alignment and enhanced charge transfer is critical for perovskite solar cells (PSCs). In addition, interface stress and lattice distortion are inevitable during the crystallization process of perovskite. Herein, IT-4F is introduced into PSCs at the buried SnO2 and perovskite interface, which assists in releasing the residual stress in the perovskite layer. Meanwhile, the work function of SnO2/IT-4F is lower than that of SnO2, which facilitates charge transfer from perovskite to ETL and consequently leads to a significant improvement in the power conversion efficiency (PCE) to 23.73%. The VOC obtained is as high as 1.17 V, corresponding to a low voltage deficit of 0.38 V for a 1.55 eV bandgap. Consequently, the device based on IT-4F maintains 94% of the initial PCE over 2700 h when stored in N2 and retains 87% of the initial PCE after operation for 1000 h.

Dopant-Free Polymer Hole Transport Materials for Highly Stable and Efficient CsPbI3 Perovskite Solar Cells.

All-inorganic perovskite CsPbI3 contains no volatile organic components and is a thermally stable photoactive material for wide-bandgap perovskite solar cells (PSCs); however, CsPbI3 readily undergoes undesirable phase transitions due to the hygroscopic nature of the ionic dopants used in commonly used hole transport materials. In the current study, the popular donor material PM6 in organic solar cells is used as a hole transport layer (HTL). The benzodithiophene-based backbone-conjugated polymer requires no dopant and leads to a higher power conversion efficiency (PCE) than 2,2',7,7'-tetrakis[N,N-di(4-methoxyphenyl)amino]-9,9'-spirobifluorene (Spiro-OMeTAD). Moreover, PM6 also shows priorities in hole mobility, hydrophobicity, cascade energy level alignment, and even defect passivation of perovskite films. With PM6 as the dopant-free HTL, the PSCs achieve a champion PCE of 18.27% with a competitive fill factor of 82.8%. Notably, the present PCE is based on the dopant-free HTL in CsPbI3 PSCs reported thus far. The PSCs with PM6 as the HTL retain over 90% of the initial PCE stored in a glovebox filled with N2 for 3000 h. In contrast, the PSCs with Spiro-OMeTAD as the HTL maintain ≈80% of the initial PCE under the same conditions.