Room for Improvement in Sports Nutrition Knowledge amongst Parents and Caregivers of Male Academy Soccer Players in the UK: A Cross-Sectional Study.

In professional soccer clubs in the UK, nutrition support is often polarised towards senior players or those in the senior academy age groups seeking first team selection/involvement. Accordingly, there is an increased reliance on parents and caregivers to provide support regarding nutritional intake. Therefore, the aim of this study was to evaluate the quality of nutrition knowledge of parents and caregivers of male youth soccer players within developmental academies in the UK. Across a single competitive season, 360 registered parents and caregivers of male soccer players from English Premier League under 9-11 (Foundation Phase) and under 12-16 (Youth Development Phase) age group academies completed an online version of the 88-item validated Nutrition for Sport Knowledge Questionnaire. Nutrition knowledge scores were classified as "poor" (43 ± 23%). Nutrition knowledge scores were significantly greater in respondents with dependents representing Category 1 (45 ± 13%) vs. Category 2 (39 ± 15%) academies and in Foundation Phase (44 ± 13%) vs. Youth Development Phase (41 ± 15%). These results demonstrate that there is room for improvement in the nutrition knowledge levels of parents and caregivers of male soccer academy players. We recommend that club academies provide appropriate resources towards nutritional education for parents and caregivers.

Eating Disorders and Disordered Eating in Competitive Cycling: A Scoping Review.

This article reports on the findings from a scoping review on eating disorders and disordered eating in competitive cycling. The review was informed by a scoping review methodological framework as well as the Preferred Reporting Items for Systematic Reviews and Meta-analysis extension for scoping reviews (PRISMA-ScR) reporting guidelines. PubMed, SPORTDiscus and Web of Science were used to identify relevant literature for review. Fourteen studies met the eligibility criteria and were included in the full review. A narrative synthesis was used to summarise the main findings and themes across the included literature. Findings from the review are presented under the following themes: cycling as an 'at-risk' discipline; power to weight ratio; energy requirements and risk of low energy availability; the social environment of cycling; nutrition support provision; relationship between eating disorders/disordered eating and exercise addiction; and recommendations made in identified literature. Overall, the literature suggests competitive cycling is a sport with a high prevalence of disordered eating and/or eating disorders and a sport with unique risk factors that contribute to this. Crucially, more research is needed in this area. The article concludes with the gaps in the literature highlighted, implications for future research, and applications to policy and practice suggested.

An Investigation into Helmet Use, Perceptions of Sports-Related Concussion, and Seeking Medical Care for Head Injury amongst Competitive Cyclists.

The purpose of this study was to investigate competitive cyclists' helmet use, perceptions of sports-related concussion (SRC), and medical-care-seeking behaviors. A mixed-method approach was used with qualitative and quantitative data presented. The study comprised of a cross-sectional analysis of 405 competitive cyclists who completed an online survey. Results indicated that most participants believed a bicycle helmet protects against SRC (79.5%) and considerable numbers of participants would not seek medical care for potential head injury in scenarios where this would be recommended. It was also discovered that marketing of concussion reduction technology influences cyclists' helmet-purchasing behaviors. With the data presented, it is recommended that governing bodies in cycling need to develop educational resources to address gaps in knowledge regarding SRC amongst cyclists. We also suggest that more independent research on concussion reduction technologies in bicycle helmets is needed, with advertising supported by clear scientific evidence to avoid negatively influencing head injury management and reporting behaviors amongst cyclists.

The magnitude of translational and rotational head accelerations experienced by riders during downhill mountain biking.

OBJECTIVES: To determine the magnitude of translational and rotational head accelerations during downhill mountain biking. DESIGN: Observational study. METHODS: Sixteen male downhill cyclists (age 26.4±8.4years; stature 179.4±7.2cm; mass 75.3±5.9kg) were monitored during two rounds of the British Downhill Series. Riders performed two runs on each course wearing a triaxial accelerometer behind the right ear. The means of the two runs for each course were used to determine differences between courses for mean and maximum peak translational (g) and rotational accelerations (rad/s2) and impact duration for each course. RESULTS: Significant differences (p<0.05) were revealed for the mean number of impacts (>10g), FW=12.5±7.6, RYF=42.8±27.4 (t(22.96)=-4.70; p<0.001; 95% CI=17.00 to 43.64); maximum peak rotational acceleration, FW=6805.4±3073.8rad/s2, RYF=9799.9±3381.7rad/s2 (t(32)=-2.636; p=0.01; 95% CI=680.31 to 5308.38); mean acceleration duration FW=4.7±1.2ms, RYF=6.5±1.4ms (t(32)=-4.05; p<0.001; 95% CI=0.91 to 2.76) and maximum acceleration duration, FW=11.6±4.5ms, RYF=21.2±9.1 (t(29.51)=-4.06; p=0.001; 95% CI=4.21 to 14.94). No other significant differences were found. CONCLUSIONS: Findings indicate that downhill riders may be at risk of sustaining traumatic brain injuries and course design influences the number and magnitude of accelerations.

Profiling of translational and rotational head accelerations in youth BMX with and without neck brace.

OBJECTIVES: To investigate the influence of BMX helmets and neck braces on translational and rotational accelerations in youth riders. DESIGN: Mixed model, repeated measure and correlation. METHODS: Twenty three competitive youth BMX riders classified by age group (6-9 years, 10-13 years and 14-18 years) completed 6 laps of an indoor BMX track at race pace, 3 laps without a neck brace (NB) and 3 without brace (WB). A triaxial accelerometer with gyroscope was placed behind the right ear to determine the mean number of accelerations, translational and rotational, of the head between conditions and by age group. RESULTS: Significant reductions by condition (p=0.02) and by age (p=0.04) were found for the number of accelerations, though no interactions (condition×age) were revealed. Significant increases by age (p=0.01) were revealed for translational accelerations, whilst significant increases by condition (p=0.02) were found for rotational accelerations. In addition, significant correlations were revealed between relative helmet mass and age (r=0.83; p=0.001) and relative helmet mass and number of accelerations (r=0.46; p=0.03). CONCLUSIONS: Accelerations at the head decreased with increased age, possibly due to the influence of greater stabilising musculature. Additionally, neck braces also significantly reduced the number of accelerations. However, the magnitude of accelerations may be influenced by riding dynamics. Therefore, the use of neck braces combined with strength work to develop neck strength, could aid in the reduction of head accelerations in youth BMX riders.

A Comparison of GPS Workload Demands in Match Play and Small-Sided Games by the Positional Role in Youth Soccer.

The external demands of small-sided games (SSGs) according to the positional role are currently unknown. Using a Catapult Minimax X3 5 Hz GPS, with a 100 Hz tri-axial accelerometer, we compared the accumulated tri-axial player workload per min (PLacc·min-1) during friendly youth match play (MP) (11 vs. 11) and SSGs (2 vs. 2, 3 vs. 3, and 4 vs. 4). Significant differences existed between all SSGs and MP for PLacc·min-1 (F = 21.91, p < 0.001, η2 = 0.38), and individual X (F = 27.40, p < 0.001, η2 = 0.43), Y (F = 14.50, p < 0.001, η2 = 0.29) and Z (F = 19.28, p < 0.001, η2 = 0.35) axis loads. Across all conditions, mean PLacc·min-1 was greater for midfielders (p = 0.004, CI: 0.68, 4.56) and forwards (p = 0.037, CI: 0.08, 3.97) than central defenders. In all conditions, greater Y axis values existed for wide defenders (p = 0.024, CI: 0.67, 1.38), midfielders (p = 0.006, CI: 0.18, 1.50) and forwards (p = 0.007, CI: 0.17, 0.15) compared to central defenders. Midfielders reported greater Z axis values compared to central defenders (p = 0.002, CI: 0.40, 2.23). We concluded that SSGs elicited greater external loads than MP, and previous studies may have underestimated the demands of SSGs.

The Effect of "Pumping" and "Nonpumping" Techniques on Velocity Production and Muscle Activity During Field-Based BMX Cycling.

Rylands, LP, Hurst, HT, Roberts, SJ, and Graydon, RW. The effect of "pumping" and "nonpumping" techniques on velocity production and muscle activity during field-based BMX cycling. J Strength Cond Res 31(2): 445-450, 2017-The aim of the current study was to determine if a technique called "pumping" had a significant effect on velocity production in Bicycle Motocross (BMX) cycling. Ten National standard male BMX riders fitted with surface electromyography (sEMG) sensors completed a timed lap of an indoor BMX track using the technique of pumping, and a lap without pumping. The lap times were recorded for both trials and their surface sEMG was recorded to ascertain any variation in muscle activation of the biceps brachii, triceps brachii, vastus lateralis, and medial gastrocnemius. The findings revealed no significant differences between any of muscle groups (p > 0.05). However, significant differences (p < 0.001) were observed between the pumping and nonpumping trials for both mean lap velocity (42 ± 1.8 km·h, 33 ± 2.9 km·h, respectively) and lap times (43.3 ± 3.1 seconds, 34.7 ± 1.49 seconds, respectively). The lap times recorded for the pumping trials were 19.50 ± 4.25% lower than the nonpumping, whereas velocity production was 21.81 ± 5.31% greater in the pumping trial compared with the nonpumping trial. The technique of pumping contributed significantly to velocity production, although not at the cost of additional muscle activity. From a physiological and technical perspective, coaches and riders should prioritize this technique when devising training regimes.

Effect of cadence selection on peak power and time of power production in elite BMX riders: A laboratory based study.

The aims of this study were to analyse the optimal cadence for peak power production and time to peak power in bicycle motocross (BMX) riders. Six male elite BMX riders volunteered for the study. Each rider completed 3 maximal sprints at a cadence of 80, 100, 120 and 140 revs · min-1 on a laboratory Schoberer Rad Messtechnik (SRM) cycle ergometer in isokinetic mode. The riders' mean values for peak power and time of power production in all 3 tests were recorded. The BMX riders produced peak power (1105 ± 139 W) at 100 revs · min-1 with lower peak power produced at 80 revs · min-1 (1060 ± 69 W, (F(2,15) = 3.162; P = .266; η2 = 0.960), 120 revs · min-1 (1077 ± 141 W, (F(2,15) = 4.348; P = .203; η2 = 0.970) and 140 revs · min-1 (1046 ± 175 W, (F(2,15) = 12.350; P = 0.077; η2 = 0.989). The shortest time to power production was attained at 120 revs · min-1 in 2.5 ± 1.07 s. Whilst a cadence of 80 revs · min-1 (3.5 ± 0.8 s, (F(2,15) = 2.667; P = .284; η2 = 0.800) 100 revs · min-1 (3.00 ± 1.13 s, (F(2,15) = 24.832; P = .039; η2 = 0.974) and 140 revs · min-1 (3.50 ± 0.88 s, (F(2,15) = 44.167; P = .006; η2 = 0.967)) all recorded a longer time to peak power production. The results indicate that the optimal cadence for producing peak power output and reducing the time to peak power output are attained at comparatively low cadences for sprint cycling events. These findings could potentially inform strength and conditioning training to maximise dynamic force production and enable coaches to select optimal gear ratios.

Influence of wheel size on muscle activity and tri-axial accelerations during cross-country mountain biking.

This study aimed to investigate the influence of different mountain bike wheel diameters on muscle activity and whether larger diameter wheels attenuate muscle vibrations during cross-country riding. Nine male competitive mountain bikers (age 34.7 ± 10.7 years; stature 177.7 ± 5.6 cm; body mass 73.2 ± 8.6 kg) participated in the study. Riders performed one lap at race pace on 26, 27.5 and 29 inch wheeled mountain bikes. sEMG and acceleration (RMS) were recorded for the full lap and during ascent and descent phases at the gastrocnemius, vastus lateralis, biceps brachii and triceps brachii. No significant main effects were found by wheel size for each of the four muscle groups for sEMG or acceleration during the full lap and for ascent and descent (P > .05). When data were analysed between muscle groups, significant differences were found between biceps brachii and triceps brachii (P < .05) for all wheel sizes and all phases of the lap with the exception of for the 26 inch wheel during the descent. Findings suggest wheel diameter has no influence on muscle activity and vibration during mountain biking. However, more activity was observed in the biceps brachii during 26 inch wheel descending. This is possibly due to an increased need to manoeuvre the front wheel over obstacles.

The effect of mountain bike wheel size on cross-country performance.

The purpose of this study was to determine the influence of different wheel size diameters on indicators of cross-country mountain bike time trial performance. Nine competitive male mountain bikers (age 34.7 ± 10.7 years; stature 177.7 ± 5.6 cm; body mass 73.2 ± 8.6 kg) performed 1 lap of a 3.48 km mountain bike (MTB) course as fast as possible on 26″, 27.5″ and 29″ wheeled MTB. Time (s), mean power (W), cadence (revs · min-1) and velocity (km · h-1) were recorded for the whole lap and during ascent and descent sections. One-way repeated measure ANOVA was used to determine significant differences. Results revealed no significant main effects for any variables by wheel size during all trials, with the exception of cadence during the descent (F(2, 16) = 8.96; P = .002; P2 = .53). Post hoc comparisons revealed differences lay between the 26″ and 29″ wheels (P = .02). The findings indicate that wheel size does not significantly influence performance during cross-country when ridden by trained mountain bikers, and that wheel choice is likely due to personal choice or sponsorship commitments.

Effect of gear ratio on peak power and time to peak power in BMX cyclists.

The aim of this study was to ascertain if gear ratio selection would have an effect on peak power and time to peak power production in elite Bicycle Motocross (BMX) cyclists. Eight male elite BMX riders volunteered for the study. Each rider performed three, 10-s maximal sprints on an Olympic standard indoor BMX track. The riders' bicycles were fitted with a portable SRM power meter. Each rider performed the three sprints using gear ratios of 41/16, 43/16 and 45/16 tooth. The results from the 41/16 and 45/16 gear ratios were compared to the current standard 43/16 gear ratio. Statistically, significant differences were found between the gear ratios for peak power (F(2,14) = 6.448; p = .010) and peak torque (F(2,14) = 4.777; p = .026), but no significant difference was found for time to peak power (F(2,14) = 0.200; p = .821). When comparing gear ratios, the results showed a 45/16 gear ratio elicited the highest peak power,1658 ± 221 W, compared to 1436 ± 129 W and 1380 ± 56 W, for the 43/16 and 41/16 ratios, respectively. The time to peak power showed a 41/16 tooth gear ratio attained peak power in -0.01 s and a 45/16 in 0.22 s compared to the 43/16. The findings of this study suggest that gear ratio choice has a significant effect on peak power production, though time to peak power output is not significantly affected. Therefore, selecting a higher gear ratio results in riders attaining higher power outputs without reducing their start time.

The Presence of Bilateral Imbalance of the Lower Limbs in Elite Youth Soccer Players of Different Ages.

The aim of this study was to examine bilateral differences in ground reaction forces (GRF), measured during a deep squat (DS) exercise, in a population of elite youth soccer players. Bilateral muscle balance is a key component in promoting musculoskeletal health of performers, yet there is a limited evidence base investigating such imbalances in youth. Seventy-four subjects were assigned to performance groups according to chronological age (younger than 13, 14, 15, 16, 17 years). Analysis of physical maturity status revealed that very few players were classified as "early" or "late" maturers. Players completed an overhead DS exercise, as part of preseason functional movement screening. Peak GRF were assessed using a twin force plate system. Significant differences (p ≤ 0.05) were identified between right and left side peak GRF for all groups except the youngest (U13) and oldest (U17). Nondominant "sides" showed the highest levels of PGRF across all groups. The magnitude of PGRF was not significantly different both within and between groups, except for the left side in the U13 to U15 groups (p = 0.04). Results from this study show that performance asymmetry is marked in adolescence. There seems a "trigger point" during the early stage of adolescence, when bilateral imbalances become marked. These differences do seem to reduce during the later stages of adolescence. Correct attention to focussed training, designed to remediate any imbalance, is warranted in adolescent groups. This is important with respect of the key associations between bilateral asymmetry and risk of injury.

Variability in Laboratory vs. Field Testing of Peak Power, Torque, and Time of Peak Power Production Among Elite Bicycle Motocross Cyclists.

The aim of this study was to ascertain the variation in elite male bicycle motocross (BMX) cyclists' peak power, torque, and time of power production during laboratory and field-based testing. Eight elite male BMX riders volunteered for the study, and each rider completed 3 maximal sprints using both a Schoberer Rad Messtechnik (SRM) ergometer in the laboratory and a portable SRM power meter on an Olympic standard indoor BMX track. The results revealed a significantly higher peak power (p ≤ 0.001, 34 ± 9%) and reduced time of power production (p ≤ 0.001, 105 ± 24%) in the field tests when compared with laboratory-derived values. Torque was also reported to be lower in the laboratory tests but not to an accepted level of significance (p = 0.182, 6 ± 8%). These results suggest that field-based testing may be a more effective and accurate measure of a BMX rider's peak power, torque, and time of power production.

The Reliability of Electromyographic Normalization Methods for Cycling Analyses.

Electromyography (EMG) is normalized in relation to a reference maximum voluntary contraction (MVC) value. Different normalization techniques are available but the most reliable method for cycling movements is unknown. This study investigated the reliability of different normalization techniques for cycling analyses. Twenty-five male cyclists (age 24.13 ± 2.79 years, body height 176.22 ± 4.87 cm and body mass 67.23 ± 4.19 kg, BMI = 21.70 ± 2.60 kg·m-1) performed different normalization procedures on two occasions, within the same testing session. The rectus femoris, biceps femoris, gastrocnemius and tibialis anterior muscles were examined. Participants performed isometric normalizations (IMVC) using an isokinetic dynamometer. Five minutes of submaximal cycling (180 W) were also undertaken, allowing the mean (DMA) and peak (PDA) activation from each muscle to serve as reference values. Finally, a 10 s cycling sprint (MxDA) trial was undertaken and the highest activation from each muscle was used as the reference value. Differences between reference EMG amplitude, as a function of normalization technique and time, were examined using repeated measures ANOVAs. The test-retest reliability of each technique was also examined using linear regression, intraclass correlations and Cronbach's alpha. The results showed that EMG amplitude differed significantly between normalization techniques for all muscles, with the IMVC and MxDA methods demonstrating the highest amplitudes. The highest levels of reliability were observed for the PDA technique for all muscles; therefore, our results support the utilization of this method for cycling analyses.

Electromyographic response of global abdominal stabilizers in response to stable- and unstable-base isometric exercise.

Core stability training traditionally uses stable-base techniques. Less is known as to the use of unstable-base techniques, such as suspension training, to activate core musculature. This study sought to assess the neuromuscular activation of global core stabilizers when using suspension training techniques, compared with more traditional forms of isometric exercise. Eighteen elite level, male youth swimmers (age, 15.5 ± 2.3 years; stature, 163.3 ± 12.7 cm; body mass, 62.2 ± 11.9 kg) participated in this study. Surface electromyography (sEMG) was used to determine the rate of muscle contraction in postural musculature, associated with core stability and torso bracing (rectus abdominus [RA], external obliques [EO], erector spinae [ES]). A maximal voluntary contraction test was used to determine peak amplitude for all muscles. Static bracing of the core was achieved using a modified "plank" position, with and without a Swiss ball, and held for 30 seconds. A mechanically similar "plank" was then held using suspension straps. Analysis of sEMG revealed that suspension produced higher peak amplitude in the RA than using a prone or Swiss ball "plank" (p = 0.04). This difference was not replicated in either the EO or ES musculature. We conclude that suspension training noticeably improves engagement of anterior core musculature when compared with both lateral and posterior muscles. Further research is required to determine how best to activate both posterior and lateral musculature when using all forms of core stability training.

The influence of different footwear on 3-D kinematics and muscle activation during the barbell back squat in males.

The barbell back squat is commonly used by athletes participating in resistance training. The barbell squat is typically performed using standard athletic shoes, or specially designed weightlifting footwear, although there are now a large number of athletes who prefer to squat barefoot or in barefoot-inspired footwear. This study aimed to determine how these footwear influence 3-D kinematics and muscle activation potentials during the barbell back squat. Fourteen experienced male participants completed squats at 70% 1 rep max in each footwear condition. 3-D kinematics from the torso, hip, knee and ankle were measured using an eight-camera motion analysis system. In addition, electromyographical (EMG) measurements were obtained from the rectus femoris, tibialis anterior, gastrocnemius, erector spinae and biceps femoris muscles. EMG parameters and joint kinematics were compared between footwear using repeated-measures analyses of variance. Participants were also asked to subjectively rate which footwear they preferred when performing their squat lifts; this was examined a chi-squared test. The kinematic analysis indicated that, in comparison to barefoot the running shoe was associated with increased squat depth, knee flexion and rectus femoris activation. The chi-squared test was significant and showed that participants preferred to squat barefoot. This study supports anecdotal evidence of athletes who prefer to train barefoot or in barefoot-inspired footwear although no biomechanical evidence was found to support this notion.

The effect of three different (-135°C) whole body cryotherapy exposure durations on elite rugby league players.

BACKGROUND: Whole body cryotherapy (WBC) is the therapeutic application of extreme cold air for a short duration. Minimal evidence is available for determining optimal exposure time. PURPOSE: To explore whether the length of WBC exposure induces differential changes in inflammatory markers, tissue oxygenation, skin and core temperature, thermal sensation and comfort. METHOD: This study was a randomised cross over design with participants acting as their own control. Fourteen male professional first team super league rugby players were exposed to 1, 2, and 3 minutes of WBC at -135°C. Testing took place the day after a competitive league fixture, each exposure separated by seven days. RESULTS: No significant changes were found in the inflammatory cytokine interleukin six. Significant reductions (p<0.05) in deoxyhaemoglobin for gastrocnemius and vastus lateralis were found. In vastus lateralis significant reductions (p<0.05) in oxyhaemoglobin and tissue oxygenation index (p<0.05) were demonstrated. Significant reductions (p<0.05) in skin temperature were recorded. No significant changes were recorded in core temperature. Significant reductions (p<0.05) in thermal sensation and comfort were recorded. CONCLUSION: Three brief exposures to WBC separated by 1 week are not sufficient to induce physiological changes in IL-6 or core temperature. There are however significant changes in tissue oxyhaemoglobin, deoxyhaemoglobin, tissue oxygenation index, skin temperature and thermal sensation. We conclude that a 2 minute WBC exposure was the optimum exposure length at temperatures of -135°C and could be applied as the basis for future studies.

The effect of different durations of carbohydrate mouth rinse on cycling performance.

Carbohydrate (CHO) mouth rinse has been shown to improve time trial performance. Although the exact mechanism remains un-established, research postulates that there are oral cavity receptors which increase neural drive. Increasing the duration of the mouth rinse could potentially increase stimulation of these receptors. The aim of the current investigation was to determine whether the duration of mouth rinse with 6.4% CHO affected 30-min self-selected cycling performance. Eleven male participants (age =24.1±3.9 years) performed three 30-min self-paced trials. On one occasion water was given as a mouth rinse for 5 s without being ingested placebo (PLA), on the other two occasions a 6.4% CHO solution was given for 5 and 10 s. Distance cycled, heart rate, ratings of perceived exertion, cadence, speed and power were recorded throughout all trials. The main findings were that distance cycled during the 10-s mouth rinse trial (20.4±2.3 km) was significantly greater compared to the PLA trial (19.2±2.2 km; P<0.01). There was no difference between the 5- and 10-s trials (P=0.15). However, 10 out of 11 participants cycled further during the 5-s trial compared to PLA, and eight cycled further during the 10-s trial compared to the 5 s. In conclusion, although there was an improvement in distance cycled with the 5-s mouth rinse compared to the PLA it was only significant with 10 s suggesting a dose response to the duration of mouth rinse.

The influence of 3D kinematic and electromyographical parameters on cycling economy.

PURPOSE: Economy is considered to be a key factor for the determination of performance in endurance events such as cycling. There have been no investigations which have related cycling economy to simultaneous measurements of 3D kinematics and muscular activation. This study examined selected biomechanical and neuromuscular parameters which have the strongest association with cycling economy. METHODS: Twenty-five trained cyclists (31.27 ± 3.19 years) completed steady state cycling time trials at a workload of 180 W. Simultaneous measurements of 3D kinematics and electromyographical parameters were obtained. Continuous measurements of expired gases were used to provide a measure of cycling economy. RESULTS: A multiple regression analysis showed that key parameters of peak knee extension velocity and mean activity of the rectus femoris muscles were significant predictors of VO2 during steady state cycling (P < 0.01). CONCLUSION: This study has documented the key biomechanical parameters pertinent to cycling economy. As economy has been shown to influence aerobic performance, future work should focus on optimising these parameters to improve cycling economy.

Power output of field-based downhill mountain biking.

The purpose of this study was to assess the power output of field-based downhill mountain biking. Seventeen trained male downhill cyclists (age 27.1 +/- 5.1 years) competing nationally performed two timed runs of a measured downhill course. An SRM powermeter was used to simultaneously record power, cadence, and speed. Values were sampled at 1-s intervals. Heart rates were recorded at 5-s intervals using a Polar S710 heart rate monitor. Peak and mean power output were 834 +/- 129 W and 75 +/- 26 W respectively. Mean power accounted for only 9% of peak values. Paradoxically, mean heart rate was 168 +/- 9 beats x min(-1) (89% of age-predicted maximum heart rate). Mean cadence (27 +/- 5 rev x min(-1)) was significantly related to speed (r = 0.51; P < 0.01). Analysis revealed an average of 38 pedal actions per run, with average pedalling periods of 5 s. Power and cadence were not significantly related to run time or any other variable. Our results support the intermittent nature of downhill mountain biking. The poor relationships between power and run time and between cadence and run time suggest they are not essential pre-requisites to downhill mountain biking performance and indicate the importance of riding dynamics to overall performance.