Exploring the synergistic effect of carboxymethyl cellulose and chitosan in enhancing thermal stability of polyurethanes through statistical mixture design approach.

The thermal stability of polyurethanes, known for its limitations, was addressed in this research by seeking improvement through the introduction of carbohydrate-based chain extenders. In this research paper, we systematically sought to improve the thermal resistance of polyurethanes by incorporating carboxymethyl cellulose and chitosan, representing a pioneering application of the mixture design approach in their preparation. In this synthesis, hydroxyl-terminated polybutadiene and isophorone diisocyanate (IPDI) were reacted to prepare -NCO terminated prepolymer, which was subsequently reacted with varying mole ratios of CMC and CSN to develop a series of five PU samples. The prepared PU samples were characterized using the Fourier-transformed infrared spectroscopic technique. Thermal pyrolysis of PU samples was examined using thermal gravimetric analysis (TGA). It was observed that, among all the samples, PUS-3 showed remarkable thermal stability over a wide temperature range. A comprehensive statistical analysis was conducted to substantiate the experimental findings. It was estimated that CMC and CSN significantly enhance the thermal stability of the samples when involved in an interaction fashion. The ANOVA Table for the mixture design demonstrates that over 90 % of the total variation in thermal stability is explained by the mixture model across a wide temperature range. Moreover, PSU-3 exhibited 4 % more thermal stability over a wide range of temperatures on average, as compared to contemporary samples.

Development of lactic acid based chain extender and soybean oil-derived polyurethanes for ecofriendly sustained drug delivery systems.

In the present study, a range of sustainable, biocompatible and biodegradable polyurethanes (PU-1 to PU-4) were synthesized using different combinations of biobased polyol (obtained through the epoxidation of soybean oil, followed by ring opening with ethanol) and polyethylene glycol (PEG) and isophorone diisocyanate. The sustainable chain extender used in this study was synthesized by the esterification of lactic acid with ethylene glycol (EG). The synthesized PU samples were characterized through scanning electron microscopy (SEM), Fourier transformed infrared (FTIR) and nuclear magnetic resonance (1H NMR and 13C NMR) spectroscopy. Wetting ability and thermal degradation analysis (TGA) of the samples were also studied. Subsequently, these PUs were examined as potential drug delivery systems using Gabapentin as a model drug, which was loaded in the polymer matrix using the solvent evaporation method. The drug release studies were carried out in 0.06 N HCl as a release medium according to the method outlined in the United States Pharmacopeia. The maximum drug release was observed for sample PU-P1, which was found to be 53.0 % after 6 h. Moreover, a comparison of different PU samples revealed a trend wherein the values of drug release were decreased with an increase in the PEG content.

Genomic analysis and biodesulfurization potential of a new carbon-sulfur bond cleaving Tsukamurella sp. 3OW.

Direct combustion of sulfur-enriched liquid fuel oil causes sulfur oxide emission, which is one of the main contributors to air pollution. Biodesulfurization is a promising and eco-friendly method to desulfurize a wide range of thiophenic compounds present in fuel oil. Previously, numerous bacterial strains from genera such as Rhodococcus, Corynebacterium, Gordonia, Nocardia, Mycobacterium, Mycolicibacterium, Paenibacillus, Shewanella, Sphingomonas, Halothiobacillus, and Bacillus have been reported to be capable of desulfurizing model thiophenic compounds or fossil fuels. In the present study, we report a new desulfurizing bacterium, Tsukamurella sp. 3OW, capable of desulfurization of dibenzothiophene through the carbon-sulfur bond cleavage 4S pathway. The bacterium showed a high affinity for the hydrocarbon phase and broad substrate specificity towards various thiophenic compounds. The overall genome-related index analysis revealed that the bacterium is closely related to Tsukamurella paurometabola species. The genomic pool of strain 3OW contains 57 genes related to sulfur metabolism, including the key dszABC genes responsible for dibenzothiophene desulfurization. The DBT-adapted cells of the strain 3OW displayed significant resilience and viability in elevated concentrations of crude oil. The bacterium showed a 19 and 37% reduction in the total sulfur present in crude and diesel oil, respectively. Furthermore, FTIR analysis indicates that the oil's overall chemistry remained unaltered following biodesulfurization. This study implies that Tsukamurella paurometabola species, previously undocumented in the context of biodesulfurization, has good potential for application in the biodesulfurization of petroleum oils.

Experimental and ab initio studies of Co-doped ZnO nanophotocatalyst thin films for dye mineralization.

Pristine ZnO and Co-doped ZnO photocatalyst thin films were fabricated on a ceramic substrate by spray pyrolysis. The optical, morphological and structural properties of the fabricated nanophotocatalyst thin films were analyzed using X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray (EDX) spectroscopy and Fourier transform infrared (FTIR) spectroscopy. Operational parameters, including dye concentration, oxidant concentration, irradiation time and pH for dye degradation, were optimized by response surface methodology (RSM). The maximum degradation obtained was 93% under ideal conditions, such as pH 7, 3 h of direct sunlight irradiation, 30 mM concentration of oxidant and 10 ppm concentration of dye (MB). The evaluation of the extent of degradation was done using the UV/visible spectrophotometry technique. The reusability of the fabricated thin film was examined under optimized conditions. Density functional theory (DFT) with the B3LYP/LanL2DZ method was used for the theoretical modelling of the fabricated nanomaterials. The optimized structure, theoretical band gaps, IR spectra and Raman spectra of the fabricated pristine ZnO and Co:ZnO nanophotocatalysts were determined.

Development of biocompatible aqueous polyurethane dispersions using chitosan and curcumin to improve physicochemical properties of textile surfaces.

The present research work aims to synthesize a blend of chitosan (CSN) and curcumin (CRN) based aqueous polyurethane dispersions (CSN-CRN APUDs) for the modification of textile surfaces. A series of anionic CSN-CRN APUDs were prepared by the reaction of isophorone diisocyanate (IPDI) with polyethylene glycol (PEG) and extended with chain extenders (CSN and CRN). Structural characterizations of prepared materials were examined through a fourier transformed infrared (FTIR) spectrophotometer. The performances of coated CSN-CRN APUDs on the colorfastness properties (washing, rubbing and perspiration) and the mechanical properties like tensile strength and tearing strength of plain weaved poly/cellulosic textiles (dyed, printed and white) were examined before and after the application of CSN-CRN APUDs. The findings showed that the mechanical and colorfastness properties of all the CSN-CRN APUDs treated poly/cellulosic textile samples were improved significantly as compared with untreated poly/cellulosic textile samples. The newly synthesized CSN-CRN APUD coating materials are sustainable and greener products, particularly derivatized from bio-resources. These coating materials can be utilized as outstanding eco-friendly substitutes for poly/cellulosic textile coatings for surface modifications.

Development of amylopectin based polyurethanes for sustained drug release studies.

In this research work, the crosslinked structure of polyurethane has been exploited for sustained drug delivery. Polyurethane composites have been prepared by the reaction of isophorone diisocyanate (IPDI) and polycaprolactone diol (PCL), which were further extended by varying the mole ratios of amylopectin (AMP) and 1,4-butane diol (1,4-BDO) chain extenders. The progress and completion of the reaction of polyurethane (PU) were confirmed using Fourier Transform infrared (FTIR) and nuclear magnetic resonance (1H NMR) spectroscopic techniques. Gel permeation chromatography (GPC) analysis showed that the molecular weights of prepared polymers were increased with the addition of amylopectin into the PU matrix. The molecular weight of AS-4 (Mw ≈ 99,367) was found threefold as compared to amylopectin-free PU (Mw ≈ 37,968). Thermal degradation analysis was done using thermal gravimetric analysis (TGA) and inferred that AS-5 showed stability up to 600 °C which was the maximum among all PUs because AMP has a large number of -OH units for linking with prepolymer resulting in a more cross-linked structure which improved the thermal stability of the AS-5 sample. The samples prepared with AMP showed less drug release (<53 %) as compared to the PU sample prepared without AMP (AS-1).

Production of rhamnolipid surfactant and its application in bioscouring of cotton fabric.

In the present study, a biosurfactant was synthesized by using a bacterial strain of Pseudomonas aeruginosa in minimal media provided with n-heptadecane as sole carbon source under shake-flask conditions. The biosurfactant was isolated (by acid precipitation, solvent extraction, and rotary evaporation), purified (by column chromatography and TLC), identified (by FAB-MS, FTIR, and 1D-(1)H NMR), and chemo-physical characterized (by tensiometry). Two principal rhamnolipid congeners were identified as dirhamnolipid RRC10C10 and monorhamnolipid RC10C10 with a CMC of 50mg/L. The biosurfactant, hence produced, was applied in sole and in combination with pectinase in scouring of cotton fabric in contrast to conventional scouring agents of NaOH and anionic surfactant SDS. The scoured cotton fabric was investigated for its weight loss, residual oil and grease, wettability, whiteness, and tensile strength. The results were compared both for conventional and biological approaches. The scouring with biosurfactant plus pectinase was equivalent to or better in efficiency than conventional alkaline scouring. The former process is additionally environmentally friendly and bio-compatible. Scanning electron microscopy of cotton fabric showed that the alkaline scouring deteriorates the fabric texture whereas bioscouring with biosurfactant plus pectinase gently removes hydrophobic impurities from the cotton fabric.

2-(4-Bromo-phen-yl)acetohydrazide.

In the title compound, C(8)H(9)BrN(2)O, the 1-bromo-4-methyl-benzene group and the formic hydrazide moiety [r.m.s. deviations of 0.0129 and 0.0038 Å] are oriented at a dihedral angle of 80.66 (11)°. In the crystal, mol-ecules are linked via strong N-H⋯O hydrogen bonds, leading to the formation of chains in the [010] direction. These chains are linked via weaker N-H⋯N and N-H⋯O hydrogen bonds, with R(2) (2)(7) and R(3) (2)(7) ring motifs, forming a two-dimensional network parallel to (001).

2-Chloro-benzohydrazide.

The asymmetric unit of the the title compound, C(7)H(7)ClN(2)O, contains two mol-ecules in which the chloro-phenyl and the formic hydrazide units are almost planar (r.m.s. deviations of 0.0081 and 0.0100 Å, respectively, in one mol-ecule and 0.0069 and 0.0150 Šin the other) and are oriented with respect to each other at dihedral angles of 56.8 (2) and 56.9 (2)°. In the crystal, the mol-ecules are consolidated in the form of polymeric chains extending along [010]. R(3) (3)(10) ring motifs exist due to N-H⋯O and N-H⋯N hydrogen bonds.

Synthesis, antioxidant activities and urease inhibition of some new 1,2,4-triazole and 1,3,4-thiadiazole derivatives.

New series of 4,5-disubstituted-2,4-dihydro-3H-1,2,4-triazole-3-thiones (8a-j) and 2,5-disubstituted-1,3,4-thiadiazoles (9a-h) were synthesized by dehydrative cyclization of hydrazinecarbothioamide derivatives (7a-k) by refluxing in 4N aqueous sodium hydroxide and by overnight stirring with polyphosphoric acid, respectively. The structures of the newly synthesized compounds were characterized by IR, (1)H NMR, (13)C NMR, elemental analysis and mass spectroscopic studies and the synthesized compounds were screened for their antioxidant and urease inhibition activities. N-(2,4-Dimethylphenyl)-5-(4-nitrophenyl)-1,3,4-thiadiazol-2-amine (9h) showed excellent antioxidant activity more than the standard drug whereas 4-(2,4-dimethylphenyl)-5-(3-nitrophenyl)-2,4-dihydro-3H-1,2,4-triazole-3-thione (8d) and 4-(2,3-dimethylphenyl)-5-phenyl-2,4-dihydro-3H-1,2,4-triazole-3-thione (8e) exhibited potent urease inhibitory activities.

3-(4-Methoxy-phen-yl)isochroman-1-one.

In the mol-ecule of the title compound, C(16)H(14)O(3), the aromatic rings are oriented at a dihedral angle of 72.02 (6)°. The heterocyclic ring adopts a twisted conformation. In the crystal structure, there are C-H⋯π contacts between the heterocyclic and phenyl rings, and between the methyl group and methoxy-phenyl ring.

2-(2-Fluoro-benzoyl-meth-yl)benzoic acid.

In the title compound, C(15)H(11)FO(3), the aromatic rings are oriented at a dihedral angle of 69.26 (3)°. In the crystal structure, inversion dimers arise from pairs of inter-molecular O-H⋯O hydrogen bonds, and C-H⋯O hydrogen bonds further consolidate the packing. There are also C-H⋯π contacts between the benzoic acid and 2-fluoro-benzene rings.