Green hydrogen generation in alkaline solution using electrodeposited Ni-Co-nano-graphene thin film cathode.

Green hydrogen generation technologies are currently the most pressing worldwide issues, offering promising alternatives to existing fossil fuels that endanger the globe with growing global warming. The current research focuses on the creation of green hydrogen in alkaline electrolytes utilizing a Ni-Co-nano-graphene thin film cathode with a low overvoltage. The recommended conditions for creating the target cathode were studied by electrodepositing a thin Ni-Co-nano-graphene film in a glycinate bath over an iron surface coated with a thin copper interlayer. Using a scanning electron microscope (SEM) and energy-dispersive X-ray (EDX) mapping analysis, the obtained electrode is physically and chemically characterized. These tests confirm that Ni, Co, and nano-graphene are homogeneously dispersed, resulting in a lower electrolysis voltage in green hydrogen generation. Tafel plots obtained to analyze electrode stability revealed that the Ni-Co-nano-graphene cathode was directed to the noble direction, with the lowest corrosion rate. The Ni-Co-nano-graphene generated was used to generate green hydrogen in a 25% KOH solution. For the production of 1 kg of green hydrogen utilizing Ni-Co-nano-graphene electrode, the electrolysis efficiency was 95.6% with a power consumption of 52 kwt h-1, whereas it was 56.212. kwt h-1 for pure nickel thin film cathode and 54. kwt h-1 for nickel cobalt thin film cathode, respectively.

Green Synthesis of Fe-Cu Bimetallic Supported on Alginate-Limestone Nanocomposite for the Removal of Drugs from Contaminated Water.

In this study Fe-Cu supported on Alginate-limestone (Fe-Cu/Alg-LS) was prepared. The increase in surface area was the main motivation for the synthesis of ternary composites. Scanning electronic microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), and transmission electron microscopy (TEM) were used to examine the surface morphology, particle size, percentage of crystallinity, and elemental content of the resultant composite. Fe-Cu/Alg-LS was used as an adsorbent for the removal of drugs such as ciprofloxacin (CIP) and levofloxacin (LEV)from contaminated medium. The adsorption parameters were computed using kinetic and isotherm models. The maximum removal efficiency of CIP (20 ppm) and LEV (10 ppm) was found to be 97.3% and 100%, respectively. The optimal conditions were pH 6 and 7 for CIP and LEV, optimum contact time 45, 40 min for CIP and LEV, and temperature of 303 K. The pseudo-second-order model, which confirmed the chemisorption properties of the process, was the most appropriate kinetic model among the ones used, and the Langmuir model, which was the most appropriate isotherm model. Moreover, the parameters of thermodynamics were also assessed. The results imply that the synthesized nanocomposites can be used to remove hazard materials from aqueous solutions.

Green production of titanium dioxide nanometric particles through electrolytic anodic dissolution of titanium metal.

Nanometric titanium derivatives such as hydroxide and dioxide compounds have a great attention because they are significant industrial material of commercial importance and applications in photocatalyst, semiconductors, and wastewater treatment. The present investigation gives the results of anodic dissolution preparation of titanium hydroxide nanometric particles followed by calcination for complete conversion to nanometric titanium dioxide product. The optimum conditions for the anodic dissolution of titanium metal were pH 4, C.D. 65 mA/cm2, 25 °C, 150 rpm, electrode gap distance 3 cm, and NaCl 3 g/l for electrolysis time 240 min and thermally calcinated at 600 °C for 240 min., to reach complete conversion to anatase titanium dioxide nanopowder of main particles size of 77 nm with major percentage of 70%. Chemical and physical characterizations were carried out for evaluation of the obtained products including transmission electron microscope, EDX, XRD, and the scanning advanced electronic diffraction pattern. Preliminary economic indicators were calculated to show that the capital cost of the plant is $1.613 million, with annual operating cost of $0.915 million which means the required investment is $2.528 million. The operating cost for the production of nanometric anatase TiO2 is $30.5/kg with depreciation excluding the land price.

An Efficient Strategy for Enhancing the Adsorption of Antibiotics and Drugs from Aqueous Solutions Using an Effective Limestone-Activated Carbon-Alginate Nanocomposite.

Based on the adsorption performance of a porous nanocomposite with limestone (LS), activated carbon (AC) and sodium alginate (SG), a unique, multifunctional LS-AC-SG nanocomposite absorbent was designed and prepared for extracting antibiotics and drugs from aqueous solutions. The composite exhibited the following advantages: quick and simple to prepare, multifunctionality and high efficiency. Amoxicillin (AMX) and diclofenac (DCF) were chosen as the conventional antibiotic and the drug, respectively. The prepared nanocomposite's physicochemical characteristics were calculated through numerous characterization methods. The structure of the surface was made up of interconnected pores that can easily confine pollutants. The surface area was measured to be 27.85 m2/g through BET analysis. The results show that the maximum absorption capacity of amoxicillin and diclofenac was 99.6% and 98.4%, respectively, at a contact time of 40 min. The maximum removal of amoxicillin and diclofenac was reached at pH = 2. Adsorption analysis revealed that adsorption isotherm and kinetic data matched the pseudo-first-order kinetic and the Langmuir isotherm models. The results imply that the synthesized nanocomposites have the capacity to remove amoxicillin (AMX) and diclofenac (DCF) from aqueous solutions.

Investigation the Effects of Green-Synthesized Copper Nanoparticles on the Performance of Activated Carbon-Chitosan-Alginate for the Removal of Cr(VI) from Aqueous Solution.

In the present investigation, green nano-zerovalent copper (GnZVCu), activated carbon (AC), chitosan (CS) and alginate (ALG) nanocomposites were produced and used for the elimination of chromium (VI) from a polluted solution. The nanocomposites GnZVCu/AC-CS-alginate and AC-CS-alginate were prepared. Analysis and characterization were performed by the following techniques: X-ray diffraction, energy dispersive X-ray spectroscopy, scanning electron microscopy, transmission electron microscopy and Fourier transform infrared spectroscopy. The SEM analysis revealed that the nanocomposites are extremely mesoporous, which leads to the greatest adsorption of Cr+6 (i.e., 97.5% and 95%) for GnZVCu/AC-CS-alginate and AC-CS-alginate, respectively. The adsorption efficiency was enhanced by coupling GnZVCu with AC-CS-alginate with a contact time of 40 min. The maximum elimination of Cr+6 with the two nanocomposites was achieved at pH 2. The isotherm model, Freundlich adsorption isotherm and kinetics model and P.S.O.R kinetic models were discovered to be better suited to describe the exclusion of Cr+6 by the nanocomposites. The results suggested that the synthesized nanocomposites are promising for the segregation of Cr+6 from polluted solutions, specially the GnZVCu/AC-CS-alginate nanocomposite.

Bio-removal of Pb, Cu, and Ni from solutions as nano-carbonates using a plant-derived urease enzyme-urea mixture.

This study focuses on utilizing a plant-derived urease enzyme (PDUE)-urea mixture to remove heavy metals from water as constituents of nano-carbonate minerals. The bio-removal process was conducted by individually mixing PbCl2, CuCl2, and NiCl2 solutions with a PDUE-urea mixture, followed by incubation for 24 h at 23 ± 2 °C. The preliminary results revealed that the proposed method exhibited high Pb removal efficiency (˃ 99%) in a short time (8 h); meanwhile, moderate Cu and Ni removal efficiencies (67.91% and 58.49%, respectively) were obtained at the same incubation time. The concentration of heavy metals (50-200 mM) had an insignificant effect on the bio-removal rate, indicating that the PDUE-urea mixture is highly effective for the removal of heavy metals at different concentrations. The bio-removal process involved the transformation of soluble heavy metals into insoluble carbonate materials. A spherically shaped nano-cerussite (4-15 nm), a malachite hexahydrate nanosheet (thickness 8 nm), and an ultrafine micro-hellyerite (thickness 0.3 µm) were the main minerals produced by the Pb, Cu, and Ni bio-removal processes, respectively. As a beneficial application, nano-cerussite was used as an additive in an alkali-activated slag/ceramic waste-based geopolymeric coating. A preliminary study proved that increasing the nano-cerussite content enhanced the resistance of the geopolymeric coating to sulfur-oxidizing bacteria, which is detrimental to normal concrete, particularly in sewer systems.