Carboxymethylcellulose encapsulated fingolimod, siRNA@ZnO hybrid nanocomposite as a new anti-Alzheimer's material.

Alzheimer's disease (AD) is a fatal neurological disorder that causes cognitive and memory function to deteriorate. A critical pathogenic event that speeds up the development of AD is the interaction between dysfunctional microglia and amyloid-ß (Aß). We have developed a hybrid nanocomposite material to treat AD by normalizing the dysfunctional microglia. The material is based on carboxymethylcellulose (CMC) encapsulated fingolimod, siRNA, and zinc oxide (ZnO) with variable loading (CMC-Fi-siRNA@ZnO a-d ). The material was characterized using different techniques including FTIR, XRD, thermal analysis, SEM with EDX, and TEM micrographs. The chemical structure was confirmed by FTIR and XRD analyses, which indicated the successful integration of ZnO nanoparticles (NPs) into the polymer matrix, signifying a well-formed composite structure. The thermal stability order at 10% weight loss was CMC-Fi-siRNA@ZnO c > CMC-Fi-siRNA@ZnO b > CMC-Fi-siRNA@ZnO d > CMC-Fi-siRNA@ZnO a . The CMC-Fi-siRNA@ZnO d dramatically alleviates the priming of microglia by lowering the level of proinflammatory mediators and increasing the secretion of BDNF. This considerably improves the phagocytosis of Aß. In the cell viability test in immortalized microglia cells (IMG), the hybrid nanocomposite (NP) exhibited no significant effect on cell survival after 48 hours of incubation. The NP also decreased the cytotoxicity caused by Aß. Therefore, the CMC-hybrid NP has high potential as a drug delivery system in the development of therapeutic strategies for AD.

Anticoagulation activity of sulfated carboxymethyl cellulose/Azadirachta indica leaf powder-based bio-composite.

Polymeric bio-composites synthesized via a green approach using natural herbs have fascinating anticoagulant activity due to their eco-friendly and non-toxic behavior towards various physical and chemical actions. Herein, we introduce a simple and eco-friendly approach for the fabrication of a new hybrid type of bio-composite based on sulfated carboxymethyl cellulose (S-CMC) and Azadirachta indica leaf powder (S-CMC/NLP). First, a non-toxic sulfating agent called N(SO3Na)3 was used to modify carboxymethyl cellulose into S-CMC. With an ion exchange capacity of 0.25 meq. g-1, the level of sulfation (%) of S-CMC (modified polysaccharide) was measured to be 12.01%. Three types of S-CMC/NLP bio-composites were developed by varying the concentration of NLP. FE-SEM, EDX, and XRD were used to characterize the structural features of S-CMC/NLP bio-composites. FTIR spectroscopy indicated that the S-CMC/NLP bio-composite possesses COO-, -OH and SO3- groups, suggesting the structural similarity to heparin. In addition, the anticoagulant effect of the S-CMC/NLP bio-composite was investigated using PT and APTT assays. The APTT investigation confirmed that following the intrinsic pathway of the coagulation system, 2-NLP/S-CMC bio-composite dose-dependently (0.045-0.28 mg mL-1) prolonged the time of blood coagulation compared to control (pure plasma). The S-CMC/NLP bio-composite showed its potential as a new, safe, and effective candidate for anticoagulant activity.

The Rising Concern of Ethanol Intoxication from Easy Access to Hand Sanitizers: A Case Report.

BACKGROUND Ethanol intoxication is very common, and several forms of alcohol intoxication can lead to emergency department visits. Excessive alcohol users, when in withdrawal, might seek replacement alcoholic beverages; one of the common sources of ethanol is hand sanitizer, which contains 45-95% alcohol. It becomes even more challenging to deal with alcohol use disorder patients when they seek these replacement products inside hospital premises, and medical clinics and hospitals have increased their use of ethanol-based hand sanitizer since the start of the COVID-19 pandemic. CASE REPORT We report the case of a 26-year-old man with alcohol dependence presenting with a fictitious illness leading to hospital admission and consumption of ethanol-based hand sanitizer in the emergency department (ED). The patient initially presented reporting severe abdominal pain that persisted despite medications. The initial laboratory tests and imaging were non-significant. The patient was later caught stealing hand sanitizer bottles, consuming them within 4-6 h. The COVID-19 pandemic has increased alcohol intoxication, especially in EDs. Hand sanitizers, including ethanol, are toxic and hazardous when misused, mostly by adolescents and young adults. Treatments include glucose determination, dextrose infusion, and thiamine perfusion. Strategies to reduce ethanol intoxication include eliminating hand sanitizers, using wall-fixed sanitizers, and using sanitizer wipes. CONCLUSIONS Patients with alcohol use disorder are known to develop alcohol-seeking behaviors. This report has highlighted that healthcare professionals should be aware that the increased availability of ethanol-based hand sanitizers, some of which contain toxic antiviral chemical agents, may be targeted by individuals with alcohol dependency.

Development of an efficient electrochemical sensing platform based on ter-poly(luminol-o-anisidine-o-toluidine)/ZnO/GNPs nanocomposites for the detection of antimony (Sb3+) ions.

A poly(luminol-o-anisidine-o-toluidine) terpolymer was synthesized, characterized, and modified with GNPs and ZnO NPs. The nanocomposites were then examined for their electroactivity and potential use as cationic electrochemical sensors for detecting Sb3+ ions in phosphate buffer on the surface of a glassy carbon electrode (GCE). Among the different compositions and the terpolymer, the GCE adapted with the PLAT/ZnO/GNPs-5% nanocomposite displayed the highest current response. The fabricated nanocomposite sensor exhibited high sensitivity, with a value of 21.4177 µA µM-1 cm-2, and a low detection limit of 95.42 pM. The analytical performance of the sensor was evaluated over the linear dynamic range (LDR) of 0.1 nM to 0.01 mM. The proposed sensor is effective in detecting and measuring carcinogenic Sb3+ ions in real environmental samples using an electrochemical approach, making it a promising tool for environmental monitoring.

Ionic Organic Network-based C3-symmetric@Triazine core as a selective Hg+2 sensor.

The C3-symmetry ionic polymer PPyTri has been designed with multi-walled carbon nanotubes (MWCNTs) or graphene nanoplatelets (GNPs) and studied as an ultrasensitive electrochemical sensor for trace Hg(II) detection. The synthesis approach incorporated attaching three pyridinium cationic components with chloride anions to the triazine core. The precursors, BPy, were synthesized using a condensation process involving 4-pyridine carboxaldehyde and focused nicotinic hydrazide. The polymer PPyTri was further modified with either MWCNTs or GNPs. The resulting ionic polymer PPyTri and its fabricated nanocomposites were characterized using infrared (IR), nuclear magnetic resonance (NMR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and powder X-ray diffraction (XRD). The analysis revealed that both the polymer and its nanocomposites have semi-crystalline structures. The electroactivity of the designed nanocomposites toward Hg + 2 ions revealed that among the nanocomposites and bare copolymer, the glassy carbon electrode (GCE) adapted with the PPyTri GNPs-5% exhibited the greatest current response over a wide range of Hg + 2 concentrations. The nanocomposite-modified electrode presented an excellent sensitivity of 83.33 µAµM - 1 cm - 2, a low detection limit of 0.033 nM, and a linear dynamic range of 0.1 nM to 0.01 mM (R2 = 0.9945).

A new polyazomethine-based pyrazole moiety and its reinforced nanocomposites @ ZnO for antimicrobial applications.

A new class of biologically active polyazomethine/pyrazole and their related nanocomposites, polyazomethine/pyrazole/zinc oxide nanoparticles, have been successfully synthesized through the polycondensation technique in the form of polyazomethine pyrazole (PAZm/Py4-6) and polyazomethine/pyrazole/zinc oxide nanoparticles (PAZm/Py/ZnOa-c). The polymeric nanocomposites were prepared with a 5% loading of zinc oxide nanofiller using the same preparation technique, in addition to the help of ultrasonic radiation. The characteristics of the new polymers, such as solubility, viscometry, and molecular weight, were examined. All the polymers were completely soluble in the following solvents: concentrated sulfuric acid, formic acid, dimethylformamide, dimethyl sulfoxide, and tetrahydrofuran. Furthermore, the weight loss of the polyazomethine pyrazole (4, 5, and 6) at 800 °C was 67%, 95%, and 86%, respectively, which indicates the thermal stability of these polymers. At 800 °C, the polyazomethine/pyrazole/zinc oxide nanoparticles (a, b, and c) lost 74%, 68%, and 75% of their weight, respectively. This shows that adding zinc oxide nanoparticles made these compounds more stable at high temperatures. The X-Ray diffraction pattern of the polyazomethine pyrazole (PAZm/Py4-6) shows a number of sharp peaks with varying intensities. The polymers that were studied had straight crystal structures. Furthermore, the measurements of polyazomethine/pyrazole/zinc oxide nanoparticles (PAZm/Py/ZnOa-c) indicate a good merging of zinc oxide nanoparticles into the matrix of polymers. The antimicrobial activity of polymers and polymer nanocomposites was tested against some selected bacteria and fungi. The synthesized polymer (c) shows the highest activity against the two types of gram-negative bacteria selected. Most tested compounds were found to be effective against gram-positive bacteria except polyazomethine pyrazole (PAZm/Py5) and polyazomethine pyrazole (PAZm/Py6), which do not exhibit any activity. The synthesized polymers and their related nanocomposites were tested for their ability to kill the chosen fungi. All of them were effective against Aspergillus flavus, but only polyazomethine pyrazole (PAZm/Py4) and polyazomethine/pyrazole/zinc oxide (PAZm/Py/ZnOc) were effective against Candida albicans.

Folliculotropic mycosis fungoides associated with follicular mucinosis: A case report and mini review.

Key Clinical Message: F-MF is a rare non-classic variant of MF. In the case of hair loss, this should be a diagnostic consideration. The essence of the diagnosis of F-MF is a careful medical history, physical examination, and a combination of immunohistological and molecular analyses (Cureus. 2022; 14:e21231, Ann Saudi Med. 2012; 32:283, Oman Med J. 2012; 27:134, Int J Dermatol. 2016; 55:1396, Saudi Med J. 2018; 39:994 and Case Rep Oncol. 2018; 11:436). Abstract: Mycosis fungoides (MF) is a primary cutaneous T-cell lymphoma with multiple subtypes. Follicular MF (F-MF) is a non-classic variant of MF. Histological features entail folliculotropism and damage of the epithelium lining of the hair follicles with or without mucin deposition. A 52-year-old male patient complained of recurrent skin lesions on the scalp over 8 months. The lesions appeared suddenly, enlarged over time, and became itchy. A skin punch biopsy was performed. Histological features included mucin deposits in the epithelium of the hair follicles and dense, predominantly perifollicular atypical lymphocytes infiltrating the follicular epithelium. The lymphoid cells were composed of CD3-positive T cells (CD4/CD8-positive T cells) with a shift in favor of the former. The case was diagnosed as F-MF on an immunohistological basis. The diagnosis of F-MF is often difficult for dermatologists and dermatopathologists alike. Not only clinicopathological correlations but also immunohistochemical and molecular analysis are required.

A Prospective Study of Chest Trauma Scoring System as A Morbidity and Mortality Predictor in Patients with Blunt Chest Trauma.

Background: Predicting the outcome of blunt chest trauma by scoring systems is of utmost value. We aimed to assess the role of the chest trauma scoring system (CTS) in predicting blunt chest trauma outcomes among Egyptians. Methods: A prospective observational study included 45 patients admitted to the cardiothoracic emergency unit of Al-Azhar University hospitals. We documented their demographic data, history, cause and mode of trauma, vital parameters, and necessary investigations (e.g., chest X-ray and Computed Tomography) when the patient was admitted to the cardiothoracic department. All patients were assessed using the chest trauma scale (CTS) and followed up till death or discharge. Results: The patient's age ranged between 18 to 76 years (mean 42.67 years). Eighty percent were males, and 48% needed mechanical ventilation (MV). The period of MV was ranged from 1 to 5 days (mean 2.81 days). Twenty-two patients had pneumonia. Eight patients died with a chest trauma scale ranging from 2 to 12 with a median of 6. About 87 percent of patients had unilateral lesions, and 5 had criminal causes. Road traffic accidents were the most typical cause of trauma (60%). There was a significant relation between mortality among the studied patients and each MV, length of ICU duration, chest trauma scale, laterality of trauma, and associated injuries. There was a statistically significant relation between the chest trauma scale and the need for MV, the timing of MV, the presence of pneumonia, and mortality. Conclusion: CTS ≥ 6.5 can predict mortality with 100.0% sensitivity, specificity of 62.2%, and accuracy of 68.9%. However, a score of ≥ 5.5 can predict the development of pneumonia with a sensitivity of 81.8%, specificity of 78.3%, and accuracy of 80%.

A new automatic sugarcane seed cutting machine based on internet of things technology and RGB color sensor.

Egypt is among the world's largest producers of sugarcane. This crop is of great economic importance in the country, as it serves as a primary source of sugar, a vital strategic material. The pre-cutting planting mode is the most used technique for cultivating sugarcane in Egypt. However, this method is plagued by several issues that adversely affect the quality of the crop. A proposed solution to these problems is the implementation of a sugarcane-seed-cutting device, which incorporates automatic identification technology for optimal efficiency. The aim is to enhance the cutting quality and efficiency of the pre-cutting planting mode of sugarcane. The developed machine consists of a feeding system, a node scanning and detection system, a node cutting system, a sugarcane seed counting and monitoring system, and a control system. The current research aims to study the pulse widths (PW) of three-color channels (R, G, and B) of the RGB color sensors under laboratory conditions. The output PW of red, green, and blue channel values were recorded at three color types for hand-colored nodes [black, red, and blue], three speeds of the feeding system [7.5 m/min, 5 m/min, and 4.3 m/min], three installing heights of the RGB color sensors [2.0 cm, 3.0 cm, and 4.0 cm], and three widths of the colored line [10.0 mm, 7.0 mm, and 3.0 mm]. The laboratory test results s to identify hand-colored sugarcane nodes showed that the recognition rate ranged from 95% to 100% and the average scanning time ranged from 1.0 s to 1.75 s. The capacity of the developed machine ranged up to 1200 seeds per hour. The highest performance of the developed machine was 100% when using hand-colored sugarcane stalks with a 10 mm blue color line and installing the RGB color sensor at 2.0 cm in height, as well as increasing the speed of the feeding system to 7.5 m/min. The use of IoT and RGB color sensors has made it possible to get analytical indicators like those achieved with other automatic systems for cutting sugar cane seeds without requiring the use of computers or expensive, fast industrial cameras for image processing.

C3-Symmetric ligands in drug design: An overview of the challenges and opportunities ahead.

C3-symmetry is a type of star-shaped molecule consisting of a central core and three symmetrically attached chains. These molecules are used in drug discovery due to their unique three-fold rotational symmetry, which allows for specific binding interactions and improved molecular recognition. In this text, we provide an overview of synthetic approaches with C3-symmetry as a pharmaceutical tool: progress, challenges, and opportunities. C3-symmetric ligands offer both challenges and opportunities in drug design. Their unique symmetry can enhance binding interactions, but careful consideration of rigidity, synthetic complexity, and target compatibility is crucial. Further research and advancements in synthetic methods and modeling tools will likely drive their exploration in drug discovery, leading to the discovery of potent C3-symmetric ligands.

Sensitive Cr3+ sensor based on novel poly(luminol-co-1,8-diaminonaphthalene)/CeO2/MWCNTs nanocomposites.

In this study, poly(luminol-co-1,8-diaminonaphthalene) (PLim-DAN) was synthesized and subsequently modified with MWCNTs and CeO2 NPs. The synthesized nanocomposites were analyzed using IR, SEM, TEM, and XRD. Furthermore, a comprehensive set of thermal behavior measurements were taken using TGA/DTG analysis. Next, the electroactivity of the developed nanocomposites was tested as an electrochemical sensor to measure the concentration of Cr3+ ions in phosphate buffers. The GCE adapted with the PLim-DAN/CeO2/CNTs-10% nanocomposite (NC) exhibited the highest current response among the other compositions and copolymers. The fabricated nanocomposite sensor showed high sensitivity, with a value of 19.78 µA µM-1 cm-2, and a low detection limit of 4.80 ± 0.24 pM. The analytical performance was evaluated by plotting a current calibration curve versus the concentration of Cr3+ ions. It was found to be linear (R2 = 0.9908) over the range of 0.1 nM to 0.1 mM, identified as the linear dynamic range (LDR). This electrochemical sensor demonstrated that it could be a useful tool for environmental monitoring by accurately detecting and measuring carcinogenic Cr3+ ions in real-world samples.

One-pot multicomponent polymerization towards heterocyclic polymers: a mini review.

Multicomponent polymerization (MCP) is an innovative field related to polymer-based chemistry that offers numerous advantages derived from multicomponent reactions (MCRs). One of the key advantages of MCP is its ability to achieve high efficiency. Additionally, MCP offers other advantages, including operational simplicity, mild reaction conditions, and atom economy. MCP is a versatile technique that is used for synthesizing a wide range of analogs from several classes of heterocyclic compounds. The ring structures of heterocyclic polymers give them different mechanical, photophysical, and electrical properties to other types of polymers. Because of their unique properties, heterocyclic polymers have been widely utilized in various significant applications. MCRs are a type of chemical reaction that can be used to synthesize a wide variety of compounds in a single pot, which allows researchers to quickly assemble libraries of compounds. The development of MCPs from MCRs has made it easier to access a library of polymers with tunable structures. However, MCPs related to alkynes or acetylene triple bonds have more potential. In this review study, we provide an overview of the synthesis of heteroatom-functional polymers and alkyne-based development or other reactions such as Cu-catalyzed, catalyst-free, MCCP, MCTPs, green monomers, A3 coupling reactions, Passerini reactions, and sequence- and controlled-multicomponent polymerization. The up-to-date progress provides a convenient and efficient kind of approach related to heteroatoms and MCP synthesis, and perspectives in terms of future directions are also discussed in the study.

New sorbent-based hydrophobic alginic acid derivatives for fat removal in multi-pesticide residues: analysis of a fatty food sample.

Hydrophobic alginic acid derivatives were synthesized with various aliphatic hydrocarbon chains for fat removal in an analysis of multi-pesticide residues in a fatty food sample. First, alginic acid was chemically modified using eco-friendly ultrasound-assisted esterification with different alcohols, namely, hydrophobic alginic acid-methanol (HAA-C1), hydrophobic alginic acid-butanol (HAA-C4), and hydrophobic alginic acid-octadecanol (HAA-C18). The degree of esterification (DE) was determined by titration, and the results ranged from 57.3% to 63.7%. The physicochemical properties of the synthesized hydrophobic alginic acids (HAAs) were studied using FT-IR, XRD, TGA, and FE-SEM. Subsequently, the performance of the HAAs was checked and evaluated for the removal of fat from a fatty food sample by calculating the fat removal percentage and the determination of 214 pesticide residues in the fatty food sample. For the fat removal percentage application, the HAAs were able to efficiently remove between 77% and 83% of the fat; HAA-C18 had the highest percentage. Regarding the pesticide residue application, HAAs were also able to remove the fat content from the fatty food sample without a significant effect on the pesticide substances. The recoveries of the detected pesticide compounds were between 80% and 120% for all HAAs. However, there were various missing pesticide compounds for HAAs. The number of missing pesticide compounds was 19, 6, and 33 for HAA-C1, HAA-C4, and HAA-C18, respectively. HAA-C4 had medium hydrophobicity and it lost fewer pesticides than the other HAAs. This was because the multi-pesticide mixture had various classes of chemical structure; hence, it had different polarity powers. We concluded that HAAs are developable and applicable to be safely used as a green material in diverse fatty food sample analysis applications.

Tropical soil remediation from pyrene: Release the power of natural iron content in soil for the efficient oxidant's activation.

Natural soil minerals often contain numerous impurities, resulting in comparatively lower catalytic activity. Tropical soils are viewed as poor from soil organic matter, cations, and anions, which are considered the main impurities in the soil that are restricted to utilizing natural minerals as a catalyst. In this regard, the dissolved iron and hematite crystals that presented naturally in tropical soil were evaluated to activate oxidants and degrade pyrene. The optimum results obtained in this study were 73 %, and the rate constant was 0.0553 h-1 under experimental conditions [pyrene] = 300 mg/50 g, pH = 7, T = 55 °C, airflow = 260 mL/min, [Persulfate (PS)] = 1.0 g/L, and humic acid (HA) ( % w/w) = 0.5 %. The soil characterization analysis after the remediation process showed an increase in moieties and cracks of the soil aggregate, and a decline in the iron and aluminium contents. The scavengers test revealed that both SO4•- and O2•- were responsible for the pyrene degradation, while HO• had a minor role in the degradation process. In addition, the monitoring of by-products, degradation pathways, and toxicity assessment were also investigated. This system is considered an efficient, green method, and could provide a step forward to develop low-cost soil remediation for full-scale implementation.

Herpes zoster ophthalmicus (HZO) secondary to platelet-rich plasma (PRP) therapy - A case report.

Androgenetic alopecia (AGA) is a common and benign cause of chronic hair loss that affects both males and females. Platelet-rich plasma (PRP) is a safe and minimally invasive technique with promising outcomes in patients with AGA, alongside other therapeutics use. The currently available data in the literature assures that the rate of side effects is low but includes infection and localized reaction (Stevens and Khetarpal, Feb. 2019) [1]. This article describes a case of herpes zoster ophthalmicus (HZO) following PRP treatment for androgenic alopecia, while shedding light on the importance of respecting the guidelines when injecting PRP therapy to ensure a safe outcome with no complications.

Environmental detection of eumycetoma pathogens using multiplex real-time PCR for soil DNA in Sennar State, Sudan.

BACKGROUND: Mycetoma is a chronic disease affecting the skin and subcutaneous tissue endemic in the tropical and subtropical regions. Several bacteria and fungi can cause mycetoma, but fungal mycetoma (eumycetoma) is challenging because the treatment requires a combination of a long-term antifungal agent and surgery. Although the transmission route has not yet been elucidated, infection from the soil is a leading hypothesis. However, there are few soil investigation studies, and the geographical distribution of mycetoma pathogens is not well documented. Here, we used multiplex real-time PCR technology to identify three fungal species from soil samples. METHODS: In total, 64 DNA samples were extracted from soil collected in seven villages in an endemic area in Sennar State, Sudan, in 2019. Primers and fluorescent probes specifically targeting the ribosomal DNA of Madurella mycetomatis, Falciformispora senegalensis, and F. tompkinsii were designed. RESULTS: Multiplex real-time PCR was performed and identified the major pathogen, M. mycetomatis that existed in most sites (95%). In addition, two other pathogens were identified from some sites. This is the first report on the use of this technique for identifying the eumycetoma causative microorganisms. CONCLUSIONS: This study demonstrated that soil DNA investigation can elucidate the risk area of mycetoma-causative agents. The results will contribute to the design of prevention measures, and further large-scale studies may be effective in understanding the natural habitats of mycetoma pathogens.

Hydrophobic carboxymethyl cellulose as a clean-up sorbent in the determination of nitrofuran metabolites in animal-fat samples.

Hydrophobic carboxymethyl cellulose (CMC) biopolymers were fabricated for the removal of fat from food sample matrices. The hydrophobic CMCs were synthesised via the esterification of CMC with three alcohols with carbon chains of different lengths, methanol, butanol, and octadecanol, in the presence of sulfuric acid. The structure of the three synthesised hydrophobic CMCs was verified using FT-IR, and the physicochemical properties were investigated by TGA, SEM, and X-ray. Characterization confirmed the successful synthesis of the hydrophobic CMCs and that the hydrophobic groups are embedded in the sorbent biopolymer to interact with fat and reduce the fat content of the sample extract. Moreover, the performance of the fabricated hydrophobic CMCs was studied in two applications: fat removal and the determination of nitrofuran (NF) metabolites in fat samples. In the first application, excellent results were observed for fat removal; the highest percentage of fat removed from food sample extracts was 94.2% and the lowest was 88.5%. Successful results were also observed in the determination of NF metabolites in fat samples, as the final extract was clear and pure using the hydrophobic CMCs, while it was turbid for the control sample. In addition, the recovery of four NF metabolites was in the range of 97-117%. In general, the hydrophobic CMCs showed promising and satisfactory results, with CMC-C18 exhibiting the best results. The NF detection method was validated using CMC-C18 in three spiking levels; 0.5, 1.0 and 1.5 µg kg-1. The average recoveries of NF range between 83.3 to 104.3%, and the intra-day precision was determined by coefficient of variation, which was below 10% for all NF. The limit of detection and limit of quantification were between 0.6 to 0.9 and 0.20 to 0.28 µg kg-1 respectively. For linearity, the correlation coefficient (r2) was higher than 0.99 for NF metabolites. Overall, the hydrophobic CMCs can be further developed and safely used as green sorbents in food analysis applications.

Insight Into Neonatal Sepsis: An Overview.

There are approximately 1.3 million cases of neonatal sepsis reported worldwide with deaths occurring more commonly in preterm and low-weight newborns. Neonatal sepsis is the third major cause of neonatal deaths resulting in 203,000 deaths per year. It is divided into two subtypes based on time of occurrence: early-onset neonatal sepsis (ENS), occurring within the first 72 hours of birth usually due to perinatal risk factors, and late-onset neonatal sepsis (LOS) usually occurring after the first week of life and up to 28th day of life. There are many complications associated with neonatal sepsis including septic shock, multiple organ failure, and death. It is vital for clinicians to know the signs and symptoms of neonatal sepsis in order to diagnose it early. Preventive measures, early diagnosis, appropriate antibiotic administration, timely supportive management, and the establishment of efficient management are vital in the prevention of severe complications or death. In this review, we aim to provide the most up-to-date information regarding risk factors, pathophysiology, signs and symptoms, diagnosis, and treatment of neonatal sepsis. We discuss the maternal and neonatal risk factors involved in the pathogenesis of neonatal sepsis and the signs and symptoms of early and late neonatal sepsis. We focus on the different pathogens involved and the markers used in the diagnosis and treatments available for each.

Integrated FRET Polymers Spatially Reveal Micro- to Nanostructure and Irregularities in Electrospun Microfibers.

A spatial view of macroscopic polymer material properties, in terms of nanostructure and irregularities, can help to better understand engineering processes such as when materials may fail. However, bridging the gap between the molecular-scale arrangement of polymer chains and the spatially resolved macroscopic properties of a material poses numerous difficulties. Herein, an integrated messenger material that can report on the material micro- to nanostructure and its processes is introduced. It is based on polymer chains labeled with fluorescent dyes that feature Förster resonance energy transfer (FRET) dependent on chain conformation and concentration within a host polymer material. These FRET materials are integrated within electrospun polystyrene microfibers, and the FRET is analyzed by confocal laser scanning microscopy (CLSM). Importantly, the use of CLSM allows a spatial view of material nanostructure and irregularities within the microfibers, where changes in FRET are significant when differences in fiber geometries and regularities exist. Furthermore, changes in FRET observed in damaged regions of the fibers indicate changes in polymer conformation and/or concentration as the material changes during compression. The system promises high utility for applications where nano-to-macro communication is needed for a better understanding of material processes.

Multicenter assessment of impairments and disabilities associated with Beirut blast injuries: a retrospective review of hospital medical records.

Objectives: This study aims to describe the injury patterns of the Beirut blast victims and assess hospitals' disaster management and preparedness during the 2020 Beirut port blast. Methods: A cross-sectional retrospective multicenter study was conducted in two stages. Data were collected on blast victims presented to participating hospitals from August 4 till August 8, using three designed questionnaires. Stage 1 included all blast patients' records and stage 2 examined a subset of inpatient and outpatient records. Binary logistic regression was performed to assess the factors associated with death and disability for blast patients. Results: A total of 3278 records were collected, 83% were treated at emergency departments and 17% were admitted to hospitals. Among those, 61 deaths and 35 long-term disabilities were reported. Extremity operations (63%) were mostly performed. Outpatients (n=410) had a mean age of 40±17.01 years and 40% sustained lacerations (40%). 10% of those patients sustained neurological complications and mental problems, and 8% had eye complications. Inpatients (n=282) had a mean age of 49±20.7 years and a mean length of hospital stay of 6±10.7 days. Secondary (37%) and tertiary (25%) blast injuries were predominant. 49% sustained extremity injuries and 19% head/face injuries. 11 inpatient deaths and 20 long-term disabilities were reported. Death was significantly associated with tertiary concussion and crush syndrome (p<0.05). Of the 16 hospitals, 13 implemented disaster plans (87%), and 14 performed a triage with a mean time of 0.96±0.67 hours. One hospital (6%) performed psychological evaluations, without follow-up. Conclusion: Beirut blast victims suffered deaths and disabilities associated with their injuries. They predominantly sustained lacerations caused by shattered glass. Tertiary injuries were associated with death. Triage, disaster plans, and hospital preparedness should be effectively implemented to enhance patients' clinical outcomes. Level of evidence: Prognostic and epidemiological/Level III.