In-situ Hf/Zr co-doped Fe2O3 nanorod decorated with CuOx/CoOx: Enhanced photocatalytic performance for antibacterial and organic pollutants.

Herein, we successfully synthesized Hf/Zr co-doping on Fe2O3 nanorod photocatalyst by a hydrothermal process and quenching methods. The synergistic roles of Hf and Zr double-doping on the bacteria inactivation test and decomposition of organic pollutants were investigated in detail for the 1 wt% CoOx loaded Hf/Zr-Fe2O3 NRs and CuOx/CoOx loaded Hf/Zr-Fe2O3 NRs photocatalyst. Initially, the rod-like porous morphology of the Hf/Zr-doped Fe2O3 NRs was produced via a hydrothermal method at various Hf co-doping (0, 2, 4, 7 and 10)%. Further, CoOx and CuOx loaded by a wet impregnation approach on the Hf/Zr-Fe2O3 NRs and a highly photoactive Hf(4)/Zr-Fe2O3 [CoOx/CuOx] NRs photocatalyst were developed. After the Hf(4)/Zr-Fe2O3 [CoOx/CuOx] NRs photocatalyst treatment, the Bio-TEM imagery of bacterial cells showed extensive morphological deviations in cell membranes. Hf(4)/Zr-Fe2O3 NR achieved 84.1% orange II degradation upon 3 h illumination, which is higher than that of Hf-Fe2O3 and Zr-Fe2O3 (68.7 and 73.5%, respectively). Additionally, the optimum sample, Hf(4)/Zr-Fe2O3 [CoOx/CuOx] photocatalyst, exhibited 95.5% orange II dye degradation after light radiation for 3 h. Optimized Hf(4)/Zr-Fe2O3 [CoOx/CuOx] catalysts exhibited 99.9% and 99.7% inactivation of E. coli and S. aureus with 120 min, respectively. Further, scavenger experiments revealed that the electrons are the primary responsible species for photocatalytic kinetics. This work will provide a rapid method for the development of high photocatalytic performance materials for bacterial disinfection and organic degradation.

In situ fabrication of Ag decorated porous ZnO photocatalyst via inorganic-organic hybrid transformation for degradation of organic pollutant and bacterial inactivation.

In this study, in situ silver (Ag) - porous ZnO photocatalysts were synthesized via solvothermal and post-annealing treatment. The formation of the porous ZnO structure due to the removal of organic moieties from the inorganic-organic hybrids Ag-ZnS(en)0.5 during the annealing process. The optimal Ag-ZnO photocatalyst showed excellent photocatalytic degradation activity, with 95.5% orange II dye and 97.2% bisphenol A (BPA) degradation under visible light conditions. Additionally, the photocatalytic inactivation of Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) led to a 97% inactivation rate after 2 h under dark conditions. Trapping experiments suggest that the superoxide anion (O2-) radicals are the main active species to degrade the organic dye. The improved photocatalytic dye degradation activity and inactivation of bacteria were attributed to the synergistic effect of Ag and porous ZnO structure, increased surface area, and efficiently separated the photoexcited charge carriers. This work could provide an effective strategy for the synthesis of porous structures toward organic pollutant degradation and bacterial inactivation in wastewater.

Influence of CoOx surface passivation and Sn/Zr-co-doping on the photocatalytic activity of Fe2O3 nanorod photocatalysts for bacterial inactivation and photo-Fenton degradation.

Hydrothermal and wet impregnation methods are presented in this study for synthesizing CoOx(1 wt%)/Sn/Zr-codoped Fe2O3 nanorod photocatalysts for the degradation of organic pollutants and deactivation of bacteria. A hydrothermal route was used to synthesize self-assembled rod-like hierarchical structures of Sn(0-6%) doped Zr-Fe2O3 NRs. Additionally, a wet impregnation method was used to load CoOx onto the surface of photocatalysts (Sn(0-6%)-doped Zr-Fe2O3 NRs). A series of 1 wt% CoOx modified Sn(0-6%)-doped Zr-Fe2O3 NRs were synthesized, characterized, and utilized for the photocatalytic decomposition of organic contaminants, along with the killing of E. coli and S. aureus. In comparison with 0, 2, and 6% Sn co-doped Zr-Fe2O3 NRs, the CoOx(1 wt%)/4%Sn/Zr-Fe2O3 NRs photocatalyst exhibited an E. coli and S. aureus inactivation efficiencies (90 and 98%). A bio-TEM study of treated and untreated bacterial cells revealed that the CoOx(1 wt%)/4%Sn/Zr-Fe2O3 NRs photocatalyst led to considerable changes in the bacterial cell membranes' morphology. The optimal CoOx(1 wt%)/Sn(4%) co-doped Zr-Fe2O3 NRs photocatalyst achieved degradation efficiencies of 98.5% and 94.6% for BPA and orange II dye, respectively. As a result, this work will provide a facile and effective method for developing visible light-active photocatalysts for bacterial inactivation and organic pollutants degradation.

Synergistic role of hydrogen treatment and heterojunction in H-WO3-x/TiO2-x NT/Ti foil-based photoanodes for photoelectrochemical wastewater detoxification and antibacterial activity.

The process of photoelectrochemical wastewater detoxification is limited by significant charge recombination, which is difficult to suppress with efficient single-material photoanodes. We demonstrated the effectiveness of hydrogen treatment in evaluating charge separation properties in WO3-x/TiO2-x NT/Ti foil heterojunction photoanodes. The influence of varying hydrogen annealing (200-400 °C) on the structural and photoelectrochemical properties of WO3/TiO2 NS/NT heterojunction is studied systematically. Additionally, after hydrogen treatment of pristine WO3/TiO2 NT/Ti foil photoanodes, substoichiometric H-WO3-x/TiO2-x NT-300 achieved the 1.21 mA/cm2 photocurrent density, which is 8.06 and 3.27 times than TiO2 NT and WO3/TiO2 NT. The hydrogen-treated H-WO3-x/TiO2-x NT-300 electrode exhibits 3 times greater bulk efficiencies than the WO3/TiO2 NT electrode due to the production of oxygen vacancies at the interface. Additionally, optimum H-WO3-x/TiO2-x NS/NT-300 photoanode exhibited 93.8% E. coli and 99.8% BPA decomposition efficiencies. The present work shows the effectiveness of microwave-assisted H-WO3-x/TiO2-x NT heterojunction photoanodes for organic decomposition and antibacterial activity in a neutral environment without surface-loaded co-catalysts.

Synergistic role of in-situ Zr-doping and cobalt oxide cocatalysts on photocatalytic bacterial inactivation and organic pollutants removal over template-free Fe2O3 nanorods.

Herein, we synthesized in-situ Zr-doped Fe2O3 NRs photocatalyst by successive simple hydrothermal and air quenching methods. The synergistic roles of CoOx (1 wt%) and Zr-doping on bacteria inactivation and model organic pollutants over Fe2O3 NRs photocatalyst were studied in detail. Initially, rod-like Zr ((0-8) %)-doped Fe2O3 NRs were produced via a hydrothermal method. CoOx was loaded onto the Zr ((0-8) %)-doped Fe2O3 NRs) surface by a wet impregnation approach. The Zr-doping conditions and CoOx loadings were judiciously optimized, and a highly photoactive CoOx(1 wt%)/Zr(6%)-doped Fe2O3 NRs photocatalyst was developed. The CoOx(1 wt%) loaded Zr(6%)-doped Fe2O3 NRs photocatalyst revealed 99.4% inactivation efficiency compared with (0, 4 and 8)% Zr-doped Fe2O3 NRs, respectively. After CoOx(1 wt%)/Zr(6%)-doped Fe2O3 NRs photocatalyst treatment, Bio-TEM images of bacterial cells showed extensive morphological deviations in cell membranes, compared with the non-treated ones. Additionally, the optimum CoOx(1 wt%)/Zr(6%)-doped Fe2O3 NRs photocatalyst exhibited 99.2% BPA and 98.3% orange II dye degradation after light radiation for 3 h. This work will provide a rapid method for the development of photostable catalyst materials for bacterial disinfection and organic degradation.

Visible-Light-Active CuO x -Loaded Mo-BiVO4 Photocatalyst for Inactivation of Harmful Bacteria (Escherichia coli and Staphylococcus aureus) and Degradation of Orange II Dye.

In the present study, Mo-BiVO4-loaded and metal oxide (MO: Ag2Ox, CoOx, and CuOx)-loaded Mo-BiVO4 photocatalysts were synthesized using a wet impregnation method and applied for microbial inactivation (Escherichia coli and Staphylococcus aureus) and orange II dye degradation under visible-light (VL) conditions (λ ≥ 420 nm). The amount of MO cocatalysts loaded onto the surface of the Mo-BiVO4 photocatalysts was effectively controlled by varying their weight percentages (i.e., 1-3 wt %). Among the pure Mo-BiVO4, Ag2Ox-, CoOx-, and CuOx-loaded Mo-BiVO4 photocatalysts used in bacterial E. coli and S. aureus inactivation under VL irradiation, the 2 wt % CuOx-loaded Mo-BiVO4 photocatalyst showed the highest degradation efficiency of E. coli (97%) and S. aureus (99%). Additionally, the maximum orange II dye degradation efficiency (80.2%) was achieved over the CuOx (2 wt %)-loaded Mo-BiVO4 photocatalysts after 5 h of radiation. The bacterial inactivation results also suggested that the CuO x -loaded Mo-BiVO4 nanostructure has significantly improved antimicrobial ability as compared to CuOx/BiVO4. The enhancement of the inactivation performance of CuOx-loaded Mo-BiVO4 can be attributed to the synergistic effect of Mo doping and Cu2+ ions in CuOx, which further acted as an electron trap on the surface of Mo-BiVO4 and promoted fast transfer and separation of the photoelectron (e-)/hole (h+) pairs for growth of reactive oxygen species (ROS). Furthermore, during the bacterial inactivation process, the ROS can disrupt the plasma membrane and destroy metabolic pathways, leading to bacterial cell death. Therefore, we provide a novel idea for visible-light-activated photocatalytic antibacterial approach for future disinfection applications.