Interband plasmon-enhanced optical absorption of DNA nucleobases through the graphene nanopore.

We propose a novel, to the best of our knowledge, plasmonic-based methodology for the purpose of fast DNA sequencing. The interband surface plasmon resonance and field-enhancement properties of graphene nanopore in the presence of the DNA nucleobases are investigated using a hybrid quantum/classical method (HQCM), which employs time-dependent density functional theory and a quasistatic finite difference time domain approach. In the strong plasmonic-molecular coupling regime where the plasmon and DNA absorption frequencies are degenerated, the optical response of DNA molecule in the vicinity of the nanopore is enhanced. In contrast, when the plasmon and nucleobases resonances are detuned the distinct peaks and broadening of the molecular resonances represent the inherent properties of the nucleobase. Due to the different optical properties of DNA nucleobases in the ultraviolet (UV) region of light, the signal corresponding to the replacement of nucleobases in a DNA block can be determined by considering the differential absorbance. Results show the promising capability of the present mechanism for practical DNA sequencing.

Highly sensitive crumpled 2D material-based plasmonic biosensors.

We propose surface plasmon resonance biosensors based on crumpled graphene and molybdenum disulphide (MoS2) flakes supported on stretchable polydimethylsiloxane (PDMS) or silicon substrates. Accumulation of specific biomarkers resulting in measurable shifts in the resonance wavelength of the plasmon modes of two-dimensional (2D) material structures, with crumpled structures demonstrating large refractive index shifts. Using theoretical calculations based on the semiclassical Drude model, combined with the finite element method, we demonstrate that the interaction between the surface plasmons of crumpled graphene/MoS2 layers and the surrounding analyte results in high sensitivity to biomarker driven refractive index shifts, up to 7499 nm/RIU for structures supported on silicon substrates. We can achieve a high figure of merit (FOM), defined as the ratio of the refractive index sensitivity to the full width at half maximum of the resonant peak, of approximately 62.5 RIU-1. Furthermore, the sensing properties of the device can be tuned by varying crumple period and aspect ratio through simple stretching and integrating material interlayers. By stacking multiple 2D materials in heterostructures supported on the PDMS layer, we produced hybrid plasmon resonances detuned from the PDMS absorbance region allowing higher sensitivity and FOM compared to pure crumpled graphene structures on the PDMS substrates. The high sensitivity and broad mechanical tunability of these crumpled 2D material biosensors considerable advantages over traditional refractive index sensors, providing a new platform for ultrasensitive biosensing.

DNA Nanotweezers and Graphene Transistor Enable Label-Free Genotyping.

Electronic DNA-biosensor with a single nucleotide resolution capability is highly desirable for personalized medicine. However, existing DNA-biosensors, especially single nucleotide polymorphism (SNP) detection systems, have poor sensitivity and specificity and lack real-time wireless data transmission. DNA-tweezers with graphene field effect transistor (FET) are used for SNP detection and data are transmitted wirelessly for analysis. Picomolar sensitivity of quantitative SNP detection is achieved by observing changes in Dirac point shift and resistance change. The use of DNA-tweezers probe with high-quality graphene FET significantly improves analytical characteristics of SNP detection by enhancing the sensitivity more than 1000-fold in comparison to previous work. The electrical signal resulting from resistance changes triggered by DNA strand-displacement and related changes in the DNA geometry is recorded and transmitted remotely to personal electronics. Practical implementation of this enabling technology will provide cheaper, faster, and portable point-of-care molecular health status monitoring and diagnostic devices.

Robust label-free microRNA detection using one million ISFET array.

Detection of nucleic acid molecules is one of the most pervasive assays in biology, medicine, and agriculture applications. Currently, most comely used DNA/RNA detection platforms use fluorescence labeling and require lab-scale setting for performing the assay. There is a need for developing less expensive, label-free, and rapid detection of biomolecules with minimal utilization of resources. Use of electrical approaches for detection of biomolecules by utilizing their inherent charge is a promising direction for biosensing assays. Here, we report a 1024 × 1024 array of Ion Sensitive Field Effect Transistors (ISFET) as label free sensors for detection of nucleic acid molecules. Using PNA probe functionalized on these ISFET array, we robustly detected miRNA Let-7b by measuring changes in drain current after hybridization of target molecules with concentration as low as 1 nM. We demonstrate that mismatched or non-complementary target molecules resulted in statistically smaller changes. Most importantly, the high-density sensor array shows unprecedented reliability and robustness with P values <0.0001 for all experiments. Practical implementation of this platform could have a wide range of applications in high-throughput nucleic acid genotyping, detection of amplified pathogenic nucleic acid, detection of cell-free DNA, and electrical readouts for current hybridization-based DNA biomolecular assays.

DNA Hydrogel with Aptamer-Toehold-Based Recognition, Cloaking, and Decloaking of Circulating Tumor Cells for Live Cell Analysis.

Circulating tumor cells (CTCs) contain molecular information on the primary tumor and can be used for predictive cancer diagnostics. Capturing rare live CTCs and their quantification in whole blood remain technically challenging. Here we report an aptamer-trigger clamped hybridization chain reaction (atcHCR) method for in situ identification and subsequent cloaking/decloaking of CTCs by porous DNA hydrogels. These decloaked CTCs were then used for live cell analysis. In our design, a DNA staple strand with aptamer-toehold biblocks specifically recognizes epithelial cell adhesion molecule (EpCAM) on the CTC surface that triggers subsequent atcHCR via toehold-initiated branch migration. Porous DNA hydrogel based-cloaking of single/cluster of CTCs allows capturing of living CTCs directly with minimal cell damage. The ability to identify a low number of CTCs in whole blood by DNA hydrogel cloaking would allow high sensitivity and specificity for diagnosis in clinically relevant settings. More significantly, decloaking of CTCs using controlled and defined chemical stimuli can release living CTCs without damages for subsequent culture and live cell analysis. We expect this liquid biopsy tool to open new powerful and effective routes for cancer diagnostics and therapeutics.

Highly specific SNP detection using 2D graphene electronics and DNA strand displacement.

Single-nucleotide polymorphisms (SNPs) in a gene sequence are markers for a variety of human diseases. Detection of SNPs with high specificity and sensitivity is essential for effective practical implementation of personalized medicine. Current DNA sequencing, including SNP detection, primarily uses enzyme-based methods or fluorophore-labeled assays that are time-consuming, need laboratory-scale settings, and are expensive. Previously reported electrical charge-based SNP detectors have insufficient specificity and accuracy, limiting their effectiveness. Here, we demonstrate the use of a DNA strand displacement-based probe on a graphene field effect transistor (FET) for high-specificity, single-nucleotide mismatch detection. The single mismatch was detected by measuring strand displacement-induced resistance (and hence current) change and Dirac point shift in a graphene FET. SNP detection in large double-helix DNA strands (e.g., 47 nt) minimize false-positive results. Our electrical sensor-based SNP detection technology, without labeling and without apparent cross-hybridization artifacts, would allow fast, sensitive, and portable SNP detection with single-nucleotide resolution. The technology will have a wide range of applications in digital and implantable biosensors and high-throughput DNA genotyping, with transformative implications for personalized medicine.

Dual-Functionalized Theranostic Nanocarriers.

Nanocarriers with the ability to spatially organize chemically distinct multiple bioactive moieties will have wide combinatory therapeutic and diagnostic (theranostic) applications. We have designed dual-functionalized, 100 nm to 1 µm sized scalable nanocarriers comprising a silica golf ball with amine or quaternary ammonium functional groups located in its pits and hydroxyl groups located on its nonpit surface. These functionalized golf balls selectively captured 10-40 nm charged gold nanoparticles (GNPs) into their pits. The selective capture of GNPs in the golf ball pits is visualized by scanning electron microscopy. ζ potential measurements and analytical modeling indicate that the GNP capture involves its proximity to and the electric charge on the surface of the golf balls. Potential applications of these dual-functionalized carriers include distinct attachment of multiple agents for multifunctional theranostic applications, selective scavenging, and clearance of harmful substances.

DNA nano-carrier for repeatable capture and release of biomolecules.

DNA can be manipulated to design nano-machines through specific sequence recognition. We report a switchable DNA carrier for repeatable capture and release of a single stranded DNA. The activity of the carrier was regulated by the interactions among a double-stranded actuator, single stranded target, fuel, and anti-fuel DNA strands. Inosine was used to maintain a stable triple-stranded complex when the actuator's conformation was switched between open (capture) and closed (release) configurations. Time lapse fluorescence measurements show repeatable capture and release of target strands. TEM images also show visible capture of target DNA strands when gold nanoparticles were attached to the DNA carrier and the target DNA strand. The carrier activity was controlled by length of toeholds, number of mismatches, and inosine substitutions. Significantly, unlike in previously published work that reported the devices functioned only when there is a perfect match between the interacting DNA strands, the present device works only when there are mismatches in the fuel strand and the best performance is achieved for 1-3 mismatches. The device was used to successfully capture and release gold nanoparticles when linked to the target single-stranded DNA. In general, this type of devices can be used for transport and delivery of theranostic molecules.