Polyethylene Luxation in an Oxinium Fixed-bearing Unicompartmental Knee Replacement Leading to Metallosis: A Case Reports for an Early and a Late Presentation.

Introduction: Polyethylene (PE) subluxation is a rare complication after fixed-bearing unicompartmental knee replacement. We present two cases of PE luxation with a rapid onset of metallosis in a unicompartmental knee replacement made of Oxinium, one early presentation 3 months after surgery and the other case 6 years after. Case Report: Case 1: A 84-year-old male underwent a fixed-bearing medial unicompartmental knee replacement in his left knee. Standard surgery was carried out with robotic assistance. Three months after surgery, he felt acute pain in the anterior portion of his knee. Radiographs showed that the PE was luxated anteriorly and a radiopaque "cloud" that blurs the vision of the implants suggesting metallosis. In the revision surgery, abundant blackish liquid and metallic-like debris were deposited in the synovial tissue and capsule around the knee. The tibial and femoral components presented extensive wear areas, suggesting extensive metal-to-metal contact. Both components were removed, and a posterior stabilized total knee prosthesis was placed. Case 2: A 50-year-old male patient underwent a fixed-bearing medial unicompartmental knee replacement. After 6 years, he complained of insidious pain in the posteromedial side of his knee. During the physical examination, significant joint effusion, a loss of extension, and a limited flexion were observed, with flexion reaching only up to 80°. The patient did not report systemic symptoms associated with metallosis, and no signs of systemic involvement were found. Radiographs show similar findings than in case 1, but the radiopaque "cloud" was limited to the knee. In the revision surgery, both components were removed. The tibial and femur components had extensive wear, especially in the posterior-central portion. A posterior stabilized total knee prosthesis was used. Conclusion: Emphasis on careful engagement between the PE and the tibial component is a must, checking that no tissue or cement gets in the way of the anchoring system. Furthermore, prosthesis designs must look for models with a more friendly, engaging system to prevent early presentation. The radiographs assessing the height of the PE - especially in the posterior area - must be carried out. In the case of metallosis and PE luxation, we suggest performing a revision surgery with total knee arthroplasty; however, there is little evidence for a strong recommendation.

Cross-cultural adaptation and validation of the KOOS, JR questionnaire for assessing knee osteoarthritis in Spanish-speaking patients.

PURPOSE: The present study aims to translate, adapt and validate a Spanish version of the Knee Injury and Osteoarthritis Outcome Score, Joint Replacement (KOOS, JR), including a reliability and validity analysis in patients with knee osteoarthritis (OA). METHODS: This study conducted a prospective validation study following the six stages of the "Guidelines for the Process of Cross-Cultural Adaptation of Self-Report Measures". Psychometric testing was conducted in patients with knee osteoarthritis. Subjects answered the Spanish KOOS, JR (S-KOOS, JR) and a validated Spanish Oxford Knee Score (S-OKS). Retest was conducted at 10 days. Acceptability, floor and ceiling effect, internal consistency (Cronbach's α), reproducibility (mixed-effect model coefficient [MEMC]) and construct validity (Spearman's correlation; p = 0.05) were assessed. RESULTS: Forty-one patients (mean age: 65.6 ± 5.39; 48.8% female) participated in the study. All patients (100%) answered both scores during the first assessment and 38 (92.7%) during the second assessment. All patient-reported outcomes measures were answered completely (100%). The S-KOOS, JR resulted in 100% acceptability when answered. There were no ceiling or floor effects detected. The Cronbach's α for the S-KOOS, JR was 0.927 and its MEMC was 0.852 (CI 95% 0.636-1.078). The Spearman's correlation between the S-KOOS, JR and the S-OKS was 0.711 (CI 0.345-0.608; p < 0.001) and 0.870 (CI 0.444-0.651; p < 0.001) for the first and second assessments, respectively. CONCLUSION: The S-KOOS, JR has very high internal consistency and reproducibility, with a high correlation with the S-OKS; it is a reliable and valid instrument for characterising Spanish-speaking patients suffering from knee OA. LEVEL OF EVIDENCE: IV.

Satisfacción personal y percepción de éxito en mujeres en traumatología: factores determinantes en la elección de la especialidad y desarrollo profesional / Personal satisfaction and perception of success among female orntthopedic surgeons: key factors in the choice of specialty and professional development

Históricamente, las médicas han sido asociadas a especialidades determinadas. En los últimos años, estos estereotipos han sido lentamente revertidos con mayor participación de la mujer en especialidades quirúrgicas. En el proceso de aprendizaje se sabe la importancia que tienen los modelos y mentores. Buscamos evaluar el grado de satisfacción y el éxito profesional de las mujeres en Traumatología, y qué factores cumplieron un rol positivo en la decisión de optar por ella.Se encuestó a 108 mujeres dedicadas a la Traumatología, y se evaluaron las influencias positivas y los mentores como modelo en la toma de decisión por la especialidad y los grados de satisfacción personal y profesional.Pese a una mayor percepción de dificultades en lograr el objetivo, destacan los altos grados de satisfacción profesional y personal de las mujeres en Traumatología: 95% refirió haber elegido la especialidad correcta, 100% afirmó que las dificultades se compensan con los resultados obtenidos, y 96% volvería a elegir la misma especialidad. En relación con la percepción de éxito, 73% se considera exitosa en su vida profesional, y en la vida personal, 85%.Muy relevante en la toma de decisión por la especialidad es el rol que cumplen docentes, mentores, y el gusto por la cirugía y los deportes. Un 84% recibió alguna influencia positiva, 61% tuvo como modelo en su formación una traumatóloga, y un 98% recomendaría a otras mujeres en período de formación que se dedicaran a la Traumatología.Las estrategias de incremento de la participación femenina en la especialidad pudiesen orientarse a fomentar modelos femeninos durante el aprendizaje.

Historically, female doctors have been associated with certain specialties. In recent years, these stereotypes have been slowly reversed with an increased participation of women in surgical specialties. The importance of models and mentors in the learning process is known. We seek to evaluate the level of professional satisfaction and success of women in Traumatology, as well as the factors that may have played a positive role in the decision to pursue this specialty. We surveyed 108 women working in Traumatology and evaluated the positive influences and mentors as models in the decision-making regarding the specialty and the degrees of personal and professional satisfaction. Despite a greater perception of difficulties in achieving the purpose, the high degrees of professional and personal satisfaction of women in Traumatology stands out: 95% reported having chosen the correct specialty, 100% stated that the difficulties are offset by the results obtained, and 96% would choose the same specialty again. Regarding the perception of success, 73% consider themselves successful in their occupation, and 85% consider themselves successful in their personal lives. The role played by teachers, mentors, as well as an interest in surgery and sports are very relevant in choosing the specialty. In total, 84% of the sample received some positive influence 61% had a female traumatologist as a model during their training, and 98% would recommend other women in training to dedicate themselves to Traumatology. The strategies to increase female participation in the specialty could be aimed at promoting female role models during learning.

Análisis biomecánico de la continuación prepatelar del cuádriceps / Biomechanical assessment of the prepatellar quadriceps continuation

OBJETIVO Determinar la resistencia máxima a la tracción (RMT) de la continuación prepatelar del cuádriceps (CPC).MATERIALES Y MÉTODOS Se realizó un estudio en cadáveres humanos. Fueron incluidos diez especímenes, en los cuales se utilizaron los tercios proximal y medial de la cortical anterior de la patela para evaluar las propiedades mecánicas de la CPC. En cada espécimen, se estudió un área de sección transversal de 0,2 cm2 (A1) y 1 cm2 (A2). Se aplicó una carga gradual para determinar la RMT.RESULTADOS La mediana de la RMT en el A1 fue de 232,56 N (rango: 141,23 N a 295,33 N) y en el A2 fue de 335,30 N (rango: 216,45 N a 371,40 N). El incremento en la TMR fue significativo entre las 2 áreas (p = 0,006).CONCLUSIÓN El ignificado clínico de este estudio es que la CPC es un tejido fuerte que puede servir de anclaje seguro para reconstrucciones alrededor de la patela. Un área relativamente pequeña tolera al menos 140 N y, a medida que crece el área, también aumenta la RMT.

OBJETIVE To determine the ultimate tensile strength (UTS) of the prepatellar quadriceps continuation (PQC). MATERIALS AND METHODS A human cadaveric study was performed. Ten fresh-frozen specimens were used. The proximal and medial thirds of the anterior cortex of the patella were used to assess the mechanical properties of the PQC. In each specimen, transverse section areas measuring 0.2 cm2 (A1) and 1 cm2 (A2) were studied. A gradual load was applied to determine the UTS. RESULTS The median UTS of A1 was of 232.56 N (range: 141.23 N to 295.33 N), and that of A2 was of 335.30 N (range: 216.45 N to 371.40 N). The increment in UTS was significant between the 2 areas (p » 0.006). CONCLUSION The clinical significance of the present study lies in the fact that it shows that the PQC is a strong tissue that can be a safe anchor for reconstruction around the patella. A relatively small area supports at least 140 N, and, as the area grows, the UTS increases as well.

Abordaje anterolateral extendido y fijación con placa rim en fragmentos posterolaterales en fracturas de platillo tibial / Extended anterolateral approach and rim plate fixation for posterolateral fragments in tibial plateau fractures

Los fragmentos posterolaterales (FPLs) en fracturas de platillo tibial son frecuentes, pero difíciles de reducir y estabilizar. Actualmente existe controversia sobre cómo deben ser abordados; si bien un abordaje anterolateral es más seguro, este puede ser insuficiente para lograr una correcta reducción. Los abordajes posterolaterales y posteriores ofrecen una visión directa y permiten una fijación con ventaja biomecánica; sin embargo, son más demandantes y exponen al paciente a una mayor morbilidad. A continuación, se presenta una nota técnica sobre la reducción y fijación de FPLs con una placa rim por medio de un abordaje anterolateral extendido a través del espacio paraligamento colateral lateral.

Posterolateral fragments (PLFs) are commonly seen in tibial plateau fractures, but their reduction and fixation are challenging. There is no consensus about the ideal approach to fix this particular fragment. Even though an anterolateral approach is a safe option, it may impair a correct reduction. The posterolateral and posterior approaches offer direct visualization of the fragment, and enable a fixation with a biomechanical advantage; however, they are more demanding and expose the patient to a higher risk if morbidity. The following technical note describes the reduction and fixation of PLFs with a rim plate through an extended anterolateral approach using the paralateral collateral ligament space.

Robotic-assisted vs conventional surgery in medial unicompartmental knee arthroplasty: a clinical and radiological study.

BACKGROUND: The use of unicompartmental knee arthroplasty (UKA) has increased and new technologies have been developed to improve patient survival and satisfaction, soft tissue balance, alignment, and component size. Robot-assisted systems offer an increase in surgical precision and accuracy. The purpose of this study is to evaluate the precision of component position using five radiological parameters in conventional and robotic-assisted medial UKA using the NAVIO system. METHODS: A cohort study was designed for patients who underwent medial UKA between April 2017 and March 2019 in a single center. Patients were allocated in the conventional (UKA-C) or robotic-assisted (UKA-R) group. The variables analyzed were age, gender, affected knee side, length of hospital stay, surgical time, and radiological measurements such as anatomical medial distal femoral angle (aMDFA), anatomical medial proximal tibial angle (aMPTA), tibial slope, the sagittal femoral angle, and the component size. A target was defined for each measurement, and a successful UKA was defined if at least four radiological measures were on target after surgery. Also, patients' reported outcomes were evaluated using the Oxford Knee Score (OKS) and a numeric rating scale (NRS) for pain. RESULTS: Thirty-four patients were included, 18 of them underwent UKA-R. The success rate for UKA in the UKA-R group was 87%; meanwhile, in the UKA-C group this was 28%, this difference was significant and powered (Fisher's exact test, p = 0.001; 1 - ß = 0.95). Also, a 5-point difference in favor of the UKA-R group in the median OKS (p = 0.01), and a significantly lower median NRS for pain (p < 0.000) were found after surgery. CONCLUSIONS: UKA-R achieved more precision in the radiological parameters' measure in this study. Also, UKA-R has a trend towards a better OKS and a lower NRS for pain at short-term follow-up.

Robot-Assisted Unicompartmental Knee Arthroplasty: Increasing Surgical Accuracy? A Cadaveric Study.

Unicompartmental knee arthroplasty (UKA) represents 10% of knee arthroplasties. Advantages are better functional results, quicker recovery, shorter hospitalization time, and lower blood loss, among others. However, revision rates are larger than total knee arthroplasty. Among the most important factors that explain this are the implant position and alignment, and the correct surgical indication. Greater accuracy in the implant placement may improve clinical results and increase the rate of implant survival. The objective of this study is to evaluate the precision of the Navio robot-assisted system in the position and alignment of medial UKA compared with the conventional technique. This is an experimental pilot study. Twenty-six cadaveric models were randomized into 2 groups: Robot-Assisted surgery (R) and Conventional Surgery (C). Radiological study was performed pre- and post-surgery, evaluating the medial distal femoral angle (MDFA), medial proximal tibial angle (MPTA), tibial slope, tibiofemoral angle (TFA), sagittal femoral angle (SFA), and size of the femoral and tibial components. The main result measurement was the change in postoperative angulation. The results of this study are MDFA median of 1.07° (0.19-4.5) for group R and 0.12° (0.03-10.4) with a significant difference in variances; a Welch t-test of p = 0.013; and an MPTA of 1.28° (0.05-5.87) for R and 1.3°(0.08-14.1) for C with significantly different variances (p = 0.0064). Size of the femoral component has a difference of p < 0.05 between groups. No differences for dispersion of TFA nor for the size of the tibial component were observed. In conclusion, using robot-assisted UKA allows for greater accuracy in the positioning of the implants and in the prediction of the size of the femoral component.

Robotic-assisted surgery in medial unicompartmental knee arthroplasty: does it improve the precision of the surgery and its clinical outcomes? Systematic review.

There is a high prevalence of knee osteoarthritis that affects only the medial tibiofemoral compartment. In this group of patients with severe disease, the medial unicompartmental knee arthroplasty (UKA) is an excellent choice. However, this technique has a great learning curve due to the lower tolerance of improper positioning and alignment. In this context, the robotic-assisted surgery (RAS) arises as an option to improve the accuracy and secondarily enhance the clinical outcomes related to the UKA. The objective in this study is to determine if there are significant advantages with the use of RAS over conventional surgery (CS). In the systematic review of the literature, classification of the results in three main subjects: (A) precision and alignment; (B) functional results and clinical parameters; (C) survivorship. We found 272 studies, of which 15 meet the inclusion and exclusion criteria. There is mostly described that RAS significantly improves the accuracy in position (80-100% of planned versus performed P < 0.05), alignment (2-3 times less error variance P < 0.05) and selection of the proper size of the implants (69.23% of correct size femoral implants versus 16.67% using CS P < 0.0154). Recently, there is mild evidence about benefits in the early rehabilitation and post-operative pain, but in all studies reviewed, there is no advantages of RAS in the long-term functional evaluation. There is no strong literature that supports a longer survival of the prothesis with RAS, being the longest mean follow-up reported of 29.6 months. RAS is a useful tool in increasing the precision of the medial UKA implant placement. However, there is still a lack of evidence that properly correlates this improvement in accuracy with better clinical, functional and survival results.

Robotic-assisted Unicompartmental knee Arthroplasty optimizes joint line restitution better than conventional surgery.

PURPOSE: To compare joint line restoration after unicompartmental knee arthroplasty (UKA) between conventional and robotic-assisted surgery. Previous studies have shown that joint line distalization can lead to higher failure rates. The hypothesis was that robotic-assisted UKA is associated with less femoral component distalization and a precise tibial cut, which allows a more anatomical restitution of the knee joint line. METHODS: Retrospective cohort study of patients undergoing medial or lateral UKA between May 2018 and March 2020. Preoperative and postoperative radiologic assessment of the joint line was performed by two observers, using three different methods, one for tibial slope and one for tibial resection. Robotic assisted UKA and conventional UKA groups were compared. RESULTS: Sixty UKA were included, of which 48 (77.42%) were medial. Robotic-assisted UKA were 40 (64.52%) and 22(35.48%) were conventional The distalization of the femoral component was higher in the conventional group despite the method of measurement used In both Weber methods, the difference was statistically different: Conventional 2.3 (0.9 to 5.6) v/s Robotic 1.5 (- 1.1 to 4.1) (p =0.0025*). A higher proportion of patients achieved a femoral component position ≤ two millimeters from the joint line using robotic-assisted UKA compared to the conventional technique . No statistical difference between robotic-assisted and conventional UKA was found in tibial resection and slope. CONCLUSION: Robotic-assisted UKA shows a better rate of joint line restoration due to less femoral component distalization than conventional UKA. No difference was found in the amount of tibial resection between groups in this study. LEVEL OF EVIDENCE: III.

Dynamic-Anatomical Reconstruction of Medial Patellofemoral Ligament in Open Physis.

Patellar dislocation is a common knee problem, 10 times more frequent in childhood and adolescence. Medial patellofemoral ligament is injured up to 94% of the time, and its reconstruction is effective in terms of stabilization of the patella. However, distal femoral physis can be damaged with different techniques of reconstruction, due to the location of the femoral footprint. The purpose of this Technical Note is to describe a quasi-anatomical and dynamic reconstruction of the medial patellofemoral ligament, using no tunnel in the femur, passing the graft behind the adductor tendon, and fixing it with one tunnel in the patella and one passage through the quadriceps tendon.

Menisco lateral hipermóvil: diagnóstico y tratamiento de lesiones de fascículos poplíteo meniscales / Hypermobile lateral meniscus: diagnosis and treatment of popliteomeniscal fasciculi injuries

El Síndrome de Menisco Hipermóvil, caracterizado por bloqueos mecánicos dolorosos de la rodilla, tiene un sustento anatómico basado en los fascículos poplíteo meniscales anteroinferior y posterosuperior, responsables de la estabilidad primaria de la esquina posterolateral meniscal. Con un cuadro clínico característico, usualmente con Resonancia Magnética sin hallazgos sugerentes de patología, la artroscopía juega un rol esencial en casos de alta sospecha, comprobando el diagnóstico al presentar hipermobilidad del cuerno posterior del menisco lateral. MÉTODO: Se presentan 9 casos resueltos, con hiperlaxitud posterolateral meniscal, y presentación clínica caracterizada por bloqueo articular de rodilla sin causa aparente. En todos los casos se realizó reparación de los fascículos poplíteo meniscales con suturas meniscales, con resolución completa de la sintomatología y sin complicaciones post quirúrgicas. CONCLUSIÓN: El manejo del cuadro de menisco hipermóvil está basado por la sospecha clínica y el descarte de otras patologías como causa subyacente de la sintomatología. El manejo quirúrgico con suturas meniscales ha demostrado restaurar la biomecánica normal del compartimento posterolateral de la rodilla, logrando la resolución completa de los síntomas. NIVEL DE EVIDENCIA: IV.

Hypermobile Meniscus Syndrome, characterized by painful mechanical blockages of the knee, has an anatomical support based on the anteroinferior and posterosuperior poplíteomeniscal fascicles, responsible for the primary stability of the posterolateral meniscal corner. With a characteristic clinical presentation, usually with Magnetic Resonance without suggestive findings of pathology, arthroscopy plays an essential role in cases of high suspicion, checking the diagnosis by presenting hypermobility of the posterior horn of the lateral meniscus. METHOD: We present 9 resolved cases, with posterolateral meniscal hypermobility, and clinical presentation characterized by knee articular block without apparent cause. In all cases, poplíteomeniscal fascicles were repaired with meniscal sutures, with complete resolution of the symptoms and without post-surgical complications. CONCLUSION: The management of the hypermobile meniscus syndrome is based on clinical suspicion and the discarding of other pathologies as the underlying cause of the symptomatology. Surgical management with meniscal sutures has been shown to restore the normal biomechanics of the posterolateral compartment of the knee, achieving complete resolution of symptoms. LEVEL OF EVIDENCE: Case series IV.

Cirugía robótica en artroplastia de rodilla / Robotic surgery in knee arthroplasty

La cirugía protésica de rodilla es un procedimiento ampliamente aceptado como etapa final del tratamiento de la artrosis de rodilla, con sobrevida que supera el 90% a 10­15 años. Dentro de las principales causas de fallo, se encuentran la infección (20,4%) y el aflojamiento mecánico (20,3%). El uso de ayudas tecnológicas en cirugía está en constante desarrollo, con el objetivo de mejorar la precisión del acto quirúrgico. En ese escenario, la Cirugía Asistida por Computador (CAS) en artroplastia de rodilla, crece de forma exponencial, y apunta a mejorar el posicionamiento y selección del tamaño de los componentes protésicos, aumentar la precisión de las resecciones óseas y mejorar el balance de los tejidos blandos, logrando así una mayor sobrevida del implante. En comparación a las técnicas convencionales, la cirugía robótica ha mostrado mejores resultados funcionales, al primer año de seguimiento, en términos de rango articular, menor dolor post-operatorio y menor tiempo de estadía hospitalaria. Pero todavía es necesario establecer si, a largo plazo, esas diferencias funcionales se traducirán en mejores resultados clínicos que permitan, de forma consistente, inclinar la balanza en favor de la técnica asistida por robot por sobre las técnicas tradicionales.

Prosthetic knee surgery is a widely accepted procedure as the final stage in the treatment of knee osteoarthritis, with survival rate over 90% at 10 - 15 years. Among the main causes of failure are infection (20.4%) and mechanical loosening (20.3%). The use of technological aids in surgery is in constant development, with the aim of improving the accuracy of the surgical act. In this scenario, Computer-Aided Surgery (CAS) in knee arthroplasty grows exponentially, and aims to improve the positioning and selection of the size of the prosthetic components, increase the accuracy of bone resections and improve the balance of soft tissues, thus achieving a greater survival of the implant. Compared to conventional techniques, robotic surgery has shown better functional results at the first year of follow-up, in terms of joint range, less post-operative pain and shorter hospital stay. It is still necessary to establish whether, in the long term, these functional differences will result in better clinical results that will allow - in a consistent manner - to tip the balance in favor of robot-assisted technique over traditional techniques.

Meniscal Ramp Lesion Repair Using an All-Inside Technique.

Posteromedial meniscotibial ligament lesions, known as meniscal ramp lesions, are typically associated with ACL injuries, but frequently underdiagnosed. When correctly diagnosed, repair is mandatory in most cases. Retraction of the soft tissues makes it difficult to repair and leads to suture failure. Previously described techniques include all-inside and inside-out meniscal sutures, but do not ensure correct meniscotibial closure because of the soft tissue retraction. The purpose of this Technical Note is to describe a meniscal ramp lesion arthroscopic repair with an all-inside technique with the Fast-Fix 360 device, detailing the use of the accessory posteromedial portal, and the addition of an arthroscopic grasper that raises the retracted meniscotibial ligament, to allow correct fixation.

Lesiones meniscales ramp, y lesiones del ligamento meniscotibial posteromedial / Meniscal ramp lesions, and posteromedial meniscotibial ligament lesions

Las lesiones meniscales son las lesiones más frecuentemente asociadas a lesiones del Ligamento Cruzado anterior (LCA), encontrándose 9,3 a 16,9% en el segmento posteromedial y comprometiendo el ligamento meniscotibial. Descritas por Strobel por su apariencia artroscópica de rampa, se ha presentado su importancia dado el subdiagnóstico y el efecto biomecánico de una lesión posteromedial del menisco sobre el LCA y que su reparación restaura la traslación nativa de la tibia en conjunto con la reconstrucción del pivote central. Se ha demostrado que la mejor forma para diagnosticar lesiones ramp, es por visiones artroscópicas accesorias, una a través del surco intercondíleo y la otra por un portal posteromedial, logrando diagnosticar y manejar aquellas lesiones que sean inestables, a través de suturas dentro tanto por el portal anterior como por el posterior. Los resultados quirúrgicos son buenos, con mayor riesgo de falla en casos que la lesión se extiende al cuerpo meniscal. Es una lesión que debe buscarse bajo lupa, ya que pasarla por alto puede llevar a progresión de la lesión y a un mayor riesgo de rerotura del ligamento cruzado reconstruido.

Meniscal tears are the most frequently associated lesions in Anterior Cruciate Ligament (ACL) rupture, 9.3 to 16.9% on them in the posteromedial segment compromising the meniscotibial ligament. Described by Strobel for its arthroscopic ramp appearance, has gained importance given the underdiagnosis and biomechanical effect of a posteromedial meniscal lesion on the ACL, and that its repair restores the native anterior tibial translation when the central pivot is also reconstructed. It has been shown that the best way to diagnose ramp lesions is by accessory portals, one through the intercondylar notch and the other through a posteromedial portal, useful to diagnose and repair those lesions that are unstable, through all-inside sutures within both Anterior and posterior portals. Surgical results are good, with increased risk of failure in cases where the lesion extends to the meniscal body. It is a lesion that must be looked for in a direct way, since misdiagnosing it can lead to ramp lesion progression and increased risk of re rupture of the reconstructed ACL.

Arthroscopic fixation of displaced tibial eminence fractures: a new growth plate-sparing method.

PURPOSE: Fractures of the tibial eminence can be treated arthroscopically. Numerous ways to attach an anterior cruciate ligament avulsion from the tibial eminence have been designed. This report describes a new physis-sparing reduction and fixation technique using an anchor passing nonabsorbable braided sutures through the substance of the anterior cruciate ligament, holding the avulsed bone fragment by tying a locking knot. This study was performed to evaluate a consecutive group of patients who underwent reduction and fixation of tibial avulsion fractures fixed with an anchor with sutures. METHODS: The evaluation was performed by use of objective and subjective International Knee Documentation Committee (IKDC) scores, KT-1000 measurement (MEDmetric, San Diego, CA), Lachman and pivot-shift tests, and Lysholm score. RESULTS: The global IKDC objective score was normal (A) in 4 knees and nearly normal (B) in 3, without extension or flexion limitations. The mean IKDC subjective score was 92 out of 100 (range, 86 to 98). The results of the anterior drawer, Lachman, and pivot-shift tests were negative. The mean Lysholm score improved from 29 to 94. The mean side-to-side difference in anterior tibial translation was 2 mm (range, 1 to 3 mm). CONCLUSIONS: Arthroscopic stabilization by use of an anchor with sutures was possible in all cases of tibial spine fracture. We were able to obtain excellent results in this series using this fixation method. LEVEL OF EVIDENCE: Level IV, therapeutic case series.