Measuring and monitoring the transition to the circular economy of universities: CExUNV.

The circular economy (CE) has been identified as a critical strategy to contribute to sustainable development and the achievement of the Sustainable Development Goals of the 2030 Agenda, being one of the biggest challenges for society in general and organisations in particular. Hence, various methods have been developed in recent years to measure the level of circularity of organisations, such as methodologies, indicators, metrics and CE tools. Universities, as education, research and community service organisations, play a key role in the promotion of and transition to the CE. Therefore, they require methods that enable them to quantify and monitor their level of circularity. However, it has been shown that CE methods developed for organisations are not suitable for such complex institutions, and, to date, no sector-specific methods have been developed. In this context, it has become necessary to develop a useful method to quantify and monitor the current level of circularity, assess its progress and facilitate decision-making on circularity that addresses the specific needs of this type of organisation. Thus, a set of 82 CE indicators and their metrics, specific to universities, has been proposed. They have been implemented in an Excel spreadsheet tool called CExUNV, in order to promote and facilitate their use. In addition, 41 improvement actions have been suggested to guide and assist universities in their progress towards CE.

Environmental implications of reprocessing agricultural waste into animal food: An experience with rice straw and citrus pruning waste.

The aim of this study is to conduct an environmental comparison, by applying the life cycle assessment (LCA) methodology, of two different compositions for animal foods each with two different nutritional contents ('high' for the lactation period, and 'low' for the rest of the year). Thus, for each nutritional content, the environmental performance of producing animal feed with a traditional composition mainly based on cereals is compared with a composition based on a mixture of biomass obtained from rice straw and citrus pruning waste. It was observed that the reprocessing of rice straw and citrus pruning waste into animal feed offered environmental potential compared to the current alternative of being burned in the fields. The environmental impact category global warming is especially improved, with impact reductions of up to 50% and 95%, respectively, for high and low nutritional content compositions. In addition, the alternatives proposed herein make it possible to avoid all the inconvenience and impacts on the health of the population living near the fields.

Sustainability reports as a tool for measuring and monitoring the transition towards the circular economy of organisations: Proposal of indicators and metrics.

Sustainability reports may play an important role as a supporting tool in the transition of organisations towards more circular economy models, since their content can help to measure, monitor and communicate the organisations' transition and to establish goals in the short/medium term. The aim of this study is to determine whether it is possible to calculate indicators capable of measuring the transition of organisations towards circularity from the information that they are currently communicating in their Corporate Sustainability Reports (CSRs), and what information would need to be incorporated in these reports to successfully carry out this procedure. To this end, by applying a three-step methodology, 34 indicators grouped into 10 categories were proposed to measure the level of circularity of organisations. This was completed with a detailed proposal of units/metrics to measure the indicators, based on those that organisations commonly use in their CSRs. For this purpose, information from 8 international programmes/frameworks that measure circularity at the territorial level was combined with circularity information that organisations are currently communicating in their CSRs. Finally, the proposed set of indicators and metrics were applied to a Spanish organisation dedicated to the forestry and paper sector with a CSR based on GRI-Standards. The results demonstrated that 25 of the 34 proposed indicators (74%) can be measured directly using the information included in the CSRs.

Repair vs. replacement: Selection of the best end-of-life scenario for small household electric and electronic equipment based on life cycle assessment.

This study presents a methodology designed for selecting, from an environmental point of view, the best end-of-life scenario for electric and electronic equipment which breaks before the end of its life span. To this end, the environmental impact of the life cycle of the equipment is evaluated for two different end-of-life scenarios: repair & reuse vs. replacement. As a case study, the proposed methodology is applied to a representative sample of nine categories of small household electric and electronic equipment (120 appliances). Repair & reuse scenarios consider the life span and the typical failures and repairs associated with each electric and electronic equipment category and the use of the repaired equipment until the remaining life span after its breakage. Replacement scenarios also consider the life span associated to each electric and electronic equipment category and the replacement of the broken equipment by an equivalent during the remaining life span after its breakage. The environmental impact obtained for both scenarios for each small household electric and electronic equipment category is compared in order to identify the best end-of-life scenario. To do so, the life cycle assessment methodology is applied, using CML and ReCiPe as midpoint- and endpoint-impact assessment methods, respectively. The results indicate that for all the analysed categories, the repair & reuse scenarios generally prove environmentally better than replacement scenarios, as Directive 2012/19/EU promotes. However, for some types of failure, e.g. those related to motors or printed circuit boards, if the failure occurs at the end of its life span, replacement is a better option than repair & reuse, since the environmental impact of the repair activities is not offset by the environmental benefits of extending the useful life until the end of the life span.

A survey on consumers' attitude towards storing and end of life strategies of small information and communication technology devices in Spain.

This study analyses the current habits and practices towards the store, repair and second-hand purchase of small electrical and electronic devices belonging to the category of information and communication technology (ICT). To this end, a survey was designed and conducted with a representative sample size of 400 individuals through telephone interviews for the following categories: MP3/MP4, video camera, photo camera, mobile phone, tablet, e-book, laptop, hard disk drive, navigator-GPS, radio/radio alarm clock. According to the results obtained, there is a tendency to store disused small ICT devices at home. On average for all the small ICT categories analysed, 73.91% of the respondents store disused small ICT devices at home. Related to the habits towards the repair and second-hand purchase of small ICT devices, 65.5% and 87.6% of the respondents have never taken to repair and have never purchased second-hand, respectively, small ICT devices. This paper provides useful and hitherto unavailable information about the current habits of discarding and reusing ICT devices. It can be concluded that there is a need to implement awareness-raising campaigns to encourage these practices, which are necessary to reach the minimum goals established regarding preparation for reuse set out in the Directive 2012/19/EU for the category small electrical and electronic equipment.

Temporal evolution of the environmental performance of implementing selective collection in municipal waste management systems in developing countries: A Brazilian case study.

The aim of this study is to analyse the evolution of the municipal solid waste management system of João Pessoa (Brazil), which was one of the Brazilian pioneers cities in implementing door-to-door selective collection programmes, in order to analyse the effect of policy decisions adopted in last decade with regard to selective collection. To do it, this study focuses on analysing the evolution, from 2005 to 2015, of the environmental performance of the municipal solid waste management (MSWM) system implemented in different sorting units with selective collection programmes by applying the Life Cycle Assessment (LCA) methodology and using as a starting point data collected directly from the different stakeholders involved in the MSWM system. This article presents the temporal evolution of environmental indicators measuring the environmental performance of the MSWM system implemented in João Pessoa by sorting unit, for each stage of the life cycle of the waste (collection, classification, intermediate transports, recycling and landfilling), for each waste fraction and for each collection method (selective collection or mixed collection), with the aim of identifying the key aspects with the greatest environmental impact and their causes. Results show on one hand, that environmental behaviour of waste management in a door-to-door selective collection programme significantly improves the behaviour of the overall waste management system. Consequently, the potential to reduce the existing environmental impact based on citizens' increased participation in selective collection is evidenced, so the implementation of awareness-raising campaigns should be one of the main issues of the next policies on solid waste. On the other hand, increasing the amount of recyclable wastes collected selectively, implementing alternative methods for valorising the organic fraction (compost/biomethanization) and improving the efficiency of the transportation stage by means of optimizing vehicles or routes, are essential actions to reduce the overall net environmental impact generated by the MSWM system.

Disassembly properties and material characterisation of household small waste electric and electronic equipment.

This paper is focused on characterising small waste electric and electronic equipment, specifically small household appliances, from two different points of views: disassembly properties and material identification. The sample for this characterisation was obtained from a selective collection campaign organised in Castellón de la Plana (Spain). A total amount of 833.7kg (749 units) of small waste electric and electronic equipment was collected, of which 23.3% by weight and 22.4% by units belonged to the subcategory household equipment. This subcategory, composed of appliances such as vacuum cleaners, toasters, sandwich makers, hand blenders, juicers, coffee makers, hairdryers, scales, irons and heaters, was first disassembled in order to analyse different aspects of the disassembly process for each equipment type: type of joints, ease of identification of materials, ease of access to joints for extracting components, ease of separation of components from the whole, uniformity of tools needed for the disassembly process and possibility of reassembly after disassembly. Results show that the most common joints used in these equipment types are snap-fits and screws, although some permanent joints have also been identified. Next, the material composition of each component of each appliance belonging to each equipment type was identified visually and with additional mechanical trials and testing. It can be observed that plastic and electric/electronic components are present in all the equipment types analysed and are also the material fractions that appear with higher percentages in the material composition: 41.1wt% and 39.1wt% for the plastic fraction and electric/electronic components, respectively. The most common plastics are: polypropylene (PP), acrylonitrile butadiene styrene (ABS) and polycarbonate (PC), while the most common electric/electronic components are: cable, plug and printed circuit boards. Results also show that disassembly properties and material characterisation vary widely from one equipment type to another.

Potential reuse of small household waste electrical and electronic equipment: Methodology and case study.

This study proposes a general methodology for assessing and estimating the potential reuse of small waste electrical and electronic equipment (sWEEE), focusing on devices classified as domestic appliances. Specific tests for visual inspection, function and safety have been defined for ten different types of household appliances (vacuum cleaner, iron, microwave, toaster, sandwich maker, hand blender, juicer, boiler, heater and hair dryer). After applying the tests, reuse protocols have been defined in the form of easy-to-apply checklists for each of the ten types of appliance evaluated. This methodology could be useful for reuse enterprises, since there is a lack of specific protocols, adapted to each type of appliance, to test its potential of reuse. After applying the methodology, electrical and electronic appliances (used or waste) can be segregated into three categories: the appliance works properly and can be classified as direct reuse (items can be used by a second consumer without prior repair operations), the appliance requires a later evaluation of its potential refurbishment and repair (restoration of products to working order, although with possible loss of quality) or the appliance needs to be finally discarded from the reuse process and goes directly to a recycling process. Results after applying the methodology to a sample of 87.7kg (96 units) show that 30.2% of the appliances have no potential for reuse and should be diverted for recycling, while 67.7% require a subsequent evaluation of their potential refurbishment and repair, and only 2.1% of them could be directly reused with minor cleaning operations. This study represents a first approach to the "preparation for reuse" strategy that the European Directive related to Waste Electrical and Electronic Equipment encourages to be applied. However, more research needs to be done as an extension of this study, mainly related to the identification of the feasibility of repair or refurbishment operations.