Polyurethane Degradable Hydrogels Based on Cyclodextrin-Oligocaprolactone Derivatives.

Polymer networks based on cyclodextrin and polyethylene glycol were prepared through polyaddition crosslinking using isophorone diisocyanate. The envisaged material properties are the hydrophilic character, specific to PEG and cyclodextrins, and the capacity to encapsulate guest molecules in the cyclodextrin cavity through physical interactions. The cyclodextrin was custom-modified with oligocaprolactone to endow the crosslinked material with a hydrolytically degradable character. SEM, DTG, and FTIR characterization methods have confirmed the morphology and structure of the prepared hydrogels. The influence of the crosslinking reaction feed was investigated through dynamic rheology. Further, thermal water swelling and hydrolytic degradation in basic conditions revealed the connectivity of the polymer network and the particular influence of the cyclodextrin amount in the crosslinking reaction feed on the material properties. Also, levofloxacin was employed as a model drug to investigate the drug loading and release capacity of the prepared hydrogels.

Dermatocosmetic Emulsions Based on Resveratrol, Ferulic Acid and Saffron (Crocus sativus) Extract to Combat Skin Oxidative Stress-Trigger Factor of Some Potential Malignant Effects: Stability Studies and Rheological Properties.

The increasing incidence of skin diseases, against the background of increased pollution, urbanism, poor habits in lifestyle, work, rest, diet and general medication, led to the development of products with a protective effect. These new types of dermatocosmetic preparations ensure maximum benefits with minimal formulation. Antioxidants are, nowadays, ingredients that stand out with a proven role in skin protection from oxidative stress and its effects. Thus, research has shown that light-textured formulas, quickly absorbed into the skin, with optimum hydration and protection against excessive free radicals, uphold the skin integrity and appearance. This article aims to evaluate essential criteria for a newly marketed product: stability, rheological properties and microbiological characteristics of oil-in-water emulsions based on a mixture of 3% resveratrol 0.5% ferulic acid and 1mL alcoholic extract of Saffron. The tests led to the conclusion that O / W dermatocosmetic emulsions, based on 3% resveratrol and 0.5% ferulic acid, or also 1mL alcoholic extract of Saffron, show resistance to microbiological contamination, good rheological properties (viscoelastic behavior, structural stability, acceptable shearing behavior) that reveal satisfactory texture and high physical stability during storage. These results encourage the transition to dermatological testing as the final stage in considering a new commercial product.

Viscosity Deviation Modeling for Binary and Ternary Mixtures of Benzyl Alcohol-N-Hexanol-Water.

Knowing the thermodynamic and transport properties of liquid systems is very important in engineering for the development of theoretical models and for the design of new technologies. Models that allow accurate predictions of thermodynamic and transport properties are needed in chemical engineering calculations involving fluid, heat, and mass transfer. In this study, the modeling of viscosity deviation for binary and ternary systems containing benzyl alcohol, n-hexanol, and water, less studied in the literature, was carried out using Redlich and Kister (R-L) models, multiple linear regression (MLR) models and artificial neural networks (ANN). The viscosity of the binary and ternary systems was experimentally determined at the following temperatures: 293.15, 303.15, 313.15, and 323.15 K. Viscosity deviation was calculated and then correlated with mole fractions, normalized temperature, and refractive index. The neural model that led to the best performance in the testing and validation stages contains 4 neurons in the input layer, 12 neurons in the hidden layer, and one neuron in the output layer. In the testing stage for this model, the standard deviation is 0.0067, and the correlation coefficient is 0.999. In the validation stage, a deviation of 0.0226 and a correlation coefficient of 0.996 were obtained. The MLR model led to worse results than those obtained with the neural model and also with the R-L models. The standard deviation for this model is 0.099, and the correlation coefficient is 0.898. Its advantage over the R-L type models is that the influence of both composition and temperature are included in a single equation.

Effects and Characterization of Some Topical Ointments Based on Vegetal Extracts on Incision, Excision, and Thermal Wound Models.

The present paper aims to formulate and characterize four phytotherapeutic ointments based on Hippophae fructus, Calendulae flos, Bardanae folium, and Millefolii herba, which are included in a novel ointment base. In order to investigate the healing properties of the ointments, in vivo experimental wound models of linear incision, circular excision, and thermal burn were performed on Wistar rats. Topical treatment was performed daily for 21 days. Determination of the wound contraction rate (WCR), the period of reepithelization, and histopathological examination were achieved. Additionally, for the tested ointments, oscillatory and rotational rheological tests were carried out, and for the extracts, HPLC analysis was performed. The results demonstrate that the tested novel ointments are safe for use and the most effective ointment proved to be the one based on Arctium lappa, followed by that of Calendulae flos.

Biomacromolecular-based ionic-covalent hydrogels for cell encapsulation: The atelocollagen - Oxidized polysaccharides couples.

Mixed crosslinked networks of ionic-covalent entanglement type were prepared starting from ternary mixtures of atelocollagen (aK; as fibrillary matrix generator), sodium hyaluronate (NaHyal; a microfibrillation assistant), and oxidized polysaccharides (OxPolys; as both cross-linkers and matrix fillers), and were tested as hydrogels for eukaryotic cell encapsulation. Either oxidized gellan (GellOx) or pullulan (PullOx) were used. An original procedure and optimal hydrogel recipes were developed to encapsulate fibroblasts and adipose-derived stem cells, while preserving their viability and proliferative ability during ex vivo temporarily storage. Physical-chemical, rheological, and biocompatibility properties of the prepared hydrogels were compared against the classic alginate hydrogel used for cell encapsulation. A larger range of material characteristics (from lax to stiff) and better laboratory maneuverability were demonstrated, which permit to design appropriate compositions for particular cell types. All hydrogels undergo fast liquefaction at temperatures between 42 and 50°C, permitting the cell release after a short innocuous thermal shock.

Formulation and evaluation of anise-based bioadhesive vaginal gels.

Various formulations of anise-based bioadhesive gels are prepared. Freeze-drying method was successfully employed and superporous scaffolds were obtained. The resulting porous microarchitectures are strongly influenced by the composition of hydrogel formulations and temperature of freezing. Anise-based hydrogels frozen in liquid nitrogen and lyophilized generate regular assembly of polyhedral pores. For Carbopol 934-based hydrogels it was determined G'>G'' for whole tested strain amplitude range indicating solid-like behaviour due to their dense network and entanglement and interaction through hydrogen bonds and van-der Waals forces. For sodium alginate-based hydrogels it was determined G''>G' for whole tested strain amplitude range accompanied by the extended linear viscoelastic region indicating liquid-like behaviour due to the formation of a stable "pseudo-gel" structure. Biocompatibility features of tested hydrogels were evaluated by contact angle measurements and determination of surface tension parameters. It was found that all anise-based hydrogel formulations manifest modest activity against S. aureus and S. lutea and no activity against tested Gram negative bacteria. Carbopol 934-based hydrogels containing anise exhibit antifungal activity against C. albicans, C. glabrata and C. Parapsilosis.

Property peculiarities of the atelocollagen-hyaluronan conjugates crosslinked with a short chain di-oxirane compound.

Minimal amounts of a short-chain bifunctional crosslinker of about 1.3 nm length, the 1,4-butanediol-diglycidyl ether (BDDGE), were used to generate atelocollagen-hyaluronan conjugates in hydrogel state. Two a priori constraints were considered in recipe/procedure developing: (i) working in nondenaturing conditions, and (ii) ensuring a low cytotoxicity of the final product. Both atelocollagen (aK) and hyaluronan (NaHyal) were accurately purified to reduce their molecular-weight dispersity, in order to ensure the reproducibility of hydrogels characteristics. 1:5 aK:NaHyal weight ratios and 1:2.5 to 1:5 α-NH2:BDDGE molar ratios were found to be the most favorable recipe prescriptions that allow the obtaining of rheo-mechanically stable hydrogels, able to be manipulated during cell culturing protocols. Experiments revealed two unexpected effects due to the crosslinking reactions mediated by a short-chain molecule: (i) the occurrence of two thresholds in the rheological behavior of the hydrogels, related with the amount of added crosslinker, and (ii) a quasi-denaturation side-effect induced over the protein component by large or in excess amounts of crosslinker.

Direct observation of athermal photofluidisation in azo-polymer films.

The surface relief gratings (SRGs) can be generated when azo-polymer films are exposed to laser beam interference as a result of mass migration. Despite considerable research effort over the past two decades this complex phenomenon remains incompletely understood. Here we show, for the first time, the athermal photofluidisation of azo-polysiloxane films exposed to 488 nm light, directly monitored by optical microscopy. A process of surface relief erasure occurring in parallel with its inscription was also observed during laser irradiation. We therefore propose a new mechanism of SRG formation, based on three different processes: (1) the polymer photo-fluidization in illuminated regions, (2) the mass displacement from illuminated to dark regions and (3) the inverse mass displacement, from dark to illuminated regions. The mechanical properties of the films during UV light irradiation were investigated by classical rheology and, for the first time, by using amplitude modulation-frequency modulation atomic force microscopy (AM-FM AFM).

Polysiloxane ionic liquids as good solvents for ß-cyclodextrin-polydimethylsiloxane polyrotaxane structures.

An ionic liquid based on polydimethylsiloxane with imidazolium salt brushes was synthesized as a good solvent for ß-cyclodextrin-polydimethylsiloxane rotaxane. As expected the PDMS-Im/Br ionic liquid had a liquid-like non-Newtonian behavior with rheological parameters dependent on frequency and temperature. The addition of rotaxane to the ionic liquid strengthened the non-Newtonian character of the sample and a type of stable liquid-like network was formed due to the contribution of weak ionic interactions. The structure is stable in the 20 to 80 °C domain as proved by the oscillatory and rotational rheological tests.

Surface activation of dyed fabric for cellulase treatment.

Surface activation of fabric made from cellulose fibres, such as viscose, lyocell, modal fibres and cotton, can be achieved by printing of a concentrated NaOH-containing paste. From the concentration of reducing sugars formed in solution, an increase in intensity of the cellulase hydrolysis by a factor of six to eight was observed, which was mainly concentrated at the activated parts of the fabric surface. This method of local activation is of particular interest for modification of materials that have been dyed with special processes to attain an uneven distribution of dyestuff within the yarn cross-section, e.g., indigo ring-dyed denim yarn for jeans production. Fabrics made from regenerated cellulose fibres were used as model substrate to express the effects of surface activation on indigo-dyed material. Wash-down experiments on indigo-dyed denim demonstrated significant colour removal from the activated surface at low overall weight loss of 4-5%. The method is of relevance for a more eco-friendly processing of jeans in the garment industry.

Advantages of a two-step enzymatic process for cotton-polyester blends.

Cotton fabric samples were treated with a formulation of a total crude Trichoderma reesei cellulase in a two-step procedure. In the first step, samples were treated at a low liquor ratio by padding through the enzyme formulation at 21 degrees C and 55 degrees C with a wet pickup of 100% and batched for 12 h. The samples were then treated at a high liquor ratio (1:25) with an identical enzyme formulation at 55 degrees C, with intensive agitation. The pre-treatment influenced the overall weight loss and rate of hydrolysis in samples, and the protein concentration in the liquor of the second step. The overall weight loss was 25-28% (w/w) in the two-step procedure compared to a weight loss of 22% (w/w) in the one-step batch hydrolysis.