Phosphonium chloride-based deep eutectic solvents inhibit pathogenic Acanthamoeba castellanii belonging to the T4 genotype.

Herein, we investigated the anti-amoebic activity of phosphonium-chloride-based deep eutectic solvents against pathogenic Acanthamoeba castellanii of the T4 genotype. Deep eutectic solvents are ionic fluids composed of two or three substances, capable of self-association to form a eutectic mixture with a melting point lower than each substance. In this study, three distinct hydrophobic deep eutectic solvents were formulated, employing trihexyltetradecylphosphonium chloride as the hydrogen bond acceptor and aspirin, dodecanoic acid, and 4-tert-butylbenzoic acid as the hydrogen bond donors. Subsequently, all three deep eutectic solvents, denoted as DES1, DES2, DES3 formulations, underwent investigations comprising amoebicidal, adhesion, excystation, cytotoxicity, and cytopathogenicity assays. The findings revealed that DES2 was the most potent anti-amoebic agent, with a 94% elimination rate against the amoebae within 24 h at 30 °C. Adhesion assays revealed that deep eutectic solvents hindered amoebae adhesion to human brain endothelial cells, with DES2 exhibiting 88% reduction of adhesion. Notably, DES3 exhibited remarkable anti-excystation properties, preventing 94% of cysts from reverting to trophozoites. In cytopathogenicity experiments, deep eutectic solvent formulations and dodecanoic acid alone reduced amoebae-induced human brain endothelial cell death, with DES2 showing the highest effects. Lactate dehydrogenase assays revealed the minimal cytotoxicity of the tested deep eutectic solvents, with the exception of trihexyltetradecylphosphonium chloride, which exhibited 35% endothelial cell damage. These findings underscore the potential of specific deep eutectic solvents in combating pathogenic Acanthamoeba, presenting promising avenues for further research and development against free-living amoebae.

Preparation and Characterization of Date Palm Bio-Oil Modified Phenolic Foam.

In this work, the potential of biomass-derived date palm bio-oil as a partial substitute for phenol in the phenolic resin was evaluated. Date palm bio-oils derived from date palm were used for the partial substitution of phenol in the preparation of phenolic foam (PF) insulation materials. Date palm waste material was processed using pyrolysis at 525 °C to produce bio-oil rich in phenolic compounds. The bio-oil was used to partially replace phenol in the synthesis of phenolic resin, which was subsequently used to prepare foams. The resulting changes in the physical, mechanical, and thermal properties of the foams were studied. The substituted foams exhibited 93%, 181%, and 40% improvement in compressive strength with 10%, 15%, and 20% bio-oil substitution, respectively. Due to the incorporation of biomass waste material, the partial reduction in phenol uses, and the favorable properties, the date palm bio-oil substituted phenolic foams are considered more environmentally benign alternatives to traditional phenolic foams.

Comparison of Toughening Effects of Various Additives on Phenolic Foam.

Phenolic foams (PFs) are considered excellent insulation materials owing to their flame retardancy and low thermal conductivity. However, their mechanical properties often lag behind those of other polymeric insulation materials. To fully exploit their properties and broaden end-use applications, the mechanical properties of PFs must be enhanced. In this study, various modifications were introduced into the PF matrix with the aim of enhancing its properties. The toughening effects of four additives: urea (U), nano clay (NC), sodium silicate (SS), and lignin (Li) were studied and compared. Changes that occurred in the density, cell morphology, thermal conductivity, compressive strength, and thermal stability after the addition of these fillers were analyzed. Both compressive strength and thermal stability increased with the inclusion of all additives, and the SS-toughened foam shows the biggest improvement. Li and NC addition resulted in a 34% improvement in compressive strength, while SS and U addition displayed increases of 52 and 11%, respectively. SS-toughened PF shows greater improvements in all of the important properties compared with those of the other toughened foams. Several PFs were prepared by changing the SS concentration to optimize the formulation, which yielded improvements in properties. The effects of SS concentration on density, thermal conductivity, and compressive strength were studied. The formulation with 0.37% sodium silicate concentration (PF-SS1) shows a 15% improvement in mechanical properties.

The increasing importance of novel deep eutectic solvents as potential effective antimicrobials and other medicinal properties.

With the rise of antibiotic resistance globally, coupled with evolving and emerging infectious diseases, there is an urgent need for the development of novel antimicrobials. Deep eutectic solvents (DES) are a new generation of eutectic mixtures that depict promising attributes with several biological implications. DES exhibit unique properties such as low toxicity, biodegradability, and high thermal stability. Herein, the antimicrobial properties of DES and their mechanisms of action against a range of microorganisms, including bacteria, amoebae, fungi, viruses, and anti-cancer properties are reviewed. Overall, DES represent a promising class of novel antimicrobial agents as well as possessing other important biological attributes, however, future studies on DES are needed to investigate their underlying antimicrobial mechanism, as well as their in vivo effects, for use in the clinic and public at large.

A Two-Step Femtosecond Laser-Based Deposition of Robust Corrosion-Resistant Molybdenum Oxide Coating.

A two-step femtosecond-pulsed laser deposition (fs-PLD) process is reported for the rapid development of uniform, poreless, crack-free, and well-adhering amorphous coatings of source materials with a high melting point. The first step comprises a high-rate raw deposition of the source material via fs-PLD, followed by a second step of scanning the raw sample with fs laser pulses of optimized fluence and scan parameters. The technique is applied to develop substoichiometric molybdenum oxide (MoOx, x < 3) coatings on mild steel. The thickness of the layer was ~4.25 µm with roughness around 0.27 µm. Comprehensive surface characterization reveals highly uniform and relatively moderate roughness coatings, implying the potential of these films as robust corrosion-resistant coats. Corrosion measurements in an aqueous NaCl environment revealed that the coated mild steel samples possess an average corrosion inhibition efficiency of around 95% relative to polished mild steel.

Antiamoebic properties of Methyltrioctylammonium chloride based deep eutectic solvents.

PURPOSE: This aim of this study was to assess anti-parasitic properties of deep eutectic solvents against eye pathogen, Acanthamoeba, often associated with the use of contact lens. METHODS: Assays were performed to investigate the effects of various Methyltrioctylammonium chloride-based deep eutectic solvents on Acanthamoeba castellanii, comprising amoebicidal assays, encystment assays, excystment assays, cytotoxicity assays by measuring lactate dehydrogenase release from human cells, and cytopathogenicity assays to determine parasite-mediated host cell death. RESULTS: In a 2 h incubation period, DES-B, DES-C, DES-D, and DES-E exhibited up to 85 % amoebicidal activity at micromolar doses, which was enhanced further following 24 h incubation. When tested in encystment assays, selected deep eutectic solvents abolished cyst formation and were able to block excystment of A. castellanii. All solvents exhibited minimal human cell cytotoxicity except DES-D. Finally, all tested deep eutectic solvents inhibited amoeba-mediated cytopathogenicity, except DES-B. CONCLUSIONS: Deep eutectic solvents show potent antiamoebic effects. These findings are promising and could lead to the development of novel contact lens disinfectants, as well as opening several avenues to explore the molecular mechanisms, various doses and incubation periods, and use of different bases against Acanthamoeba castellanii.

Clay-Alginate Beads Loaded with Ionic Liquids: Potential Adsorbents for the Efficient Extraction of Oil from Produced Water.

Produced water (PW) generated from the petroleum industry, during the extraction of oil and gas, has harmful impacts on human health and aquatic life, due to its complex nature. Therefore, it is necessary to treat it before discharging it into the environment in order to avoid serious environmental concerns. In this research, oil adsorption from PW was investigated using clay-alginate beads loaded with ionic liquids (ILs), as the adsorbent material. The effects of several process parameters, such as the initial concentration of oil, contact time, pH, and temperature on the removal efficiency of the beads, were analyzed and optimized. Different characterization methods, such as the Fourier transform infrared spectrophotometer (FTIR), scanning electron microscopy (SEM), energy dispersive X-ray (EDX), and thermal gravimetric analysis (TGA), were used to investigate the surface morphology, the chemical bond structure and functional group, and the thermal stability of the ILs-based beads. The results revealed that the clay-alginate-ILs beads indicated a removal efficiency of 71.8% at the optimum conditions (600 ppm initial oil concentration, 70 min contact time, 10 pH, and at room temperature) with an adsorption capacity of 431 mg/g. The FTIR analysis confirmed the successful chemical bond interaction of the oil with the beads. The SEM analysis verified that the beads have a porous and rough surface, which is appropriate for the adsorption of oil onto the bead's surface. The TGA analysis provides the thermal degradation profile for the clay-alginate-ILs. The beads used in the adsorption process were regenerated and used for up to four cycles.

A novel montmorillonite clay-cetylpyridinium chloride complex as a potential antiamoebic composite material in contact lenses disinfection.

BACKGROUND: Acanthamoeba keratitis is a painful, sight-threatening infection. It is commonly associated with the use of contact lens. Several lines of evidence suggest inadequate contact lens solutions especially against the cyst forms of pathogenic Acanthamoeba, indicating the need to develop effective disinfectants. OBJECTIVE: In this work, the application and assessment of montmorillonite clay (Mt-clay), cetylpyridinium chloride (CPC) and cetylpyridinium chloride-montmorillonite clay complex (CPC-Mt) against keratitis-causing A. castellanii belonging to the T4 genotype was studied. METHODS: Adhesion to human cells and amoeba-mediated cytopathogenicity assays were conducted to determine the impact of Mt-clay, CPC and CPC-Mt complex on amoeba-mediated binding and host cell death. Furthermore, assays were also performed to determine inhibitory effects of Mt-clay, CPC and CPC-Mt complex on encystment and excystment. In addition, the cytotoxicity of Mt-clay, CPC and CPC-Mt complex against human cells was examined. RESULTS: The results revealed that CPC and CPC-Mt complex presented significant antiamoebic effects against A. castellanii at microgram dose. Also, the CPC and CPC-Mt complex inhibited amoebae binding to host cells. Furthermore, CPC and CPC-Mt complex, were found to inhibit the encystment and excystment processes. Finally, CPC and CPC-Mt complex showed minimal host cell cytotoxicity. These results show that CPC and CPC-Mt complex exhibit potent anti-acanthamoebic properties. CONCLUSION: Given the ease of usage, safety, cost-effectiveness and long-term stability, CPC and CPC-Mt complex can prove to be an excellent choice in the rational development of contact-lens disinfectants to eradicate pathogenic Acanthamoeba effectively.

Antiamoebic properties of salicylic acid-based deep eutectic solvents for the development of contact lens disinfecting solutions against Acanthamoeba.

Acanthamoeba castellanii is a protist pathogen that can cause sight-threatening keratitis and a fatal infection of the central nervous system, known as granulomatous amoebic encephalitis. In this study, effects of five malonic acid and salicylic acid-based deep eutectic solvents (DES) on A. castellanii were investigated. These are salicylic acid-trioctylphosphine (DES 1), salicylic acid- trihexylamine (DES 2), salicylic acid-trioctylamine (DES 3), malonic acid-trioctylphosphine (DES 4) and malonic acid-trihexylamine (DES 5). The experiments were done by performing amoebicidal, encystment, excystment, cytopathogenicity, and cytotoxicity assays. At micromolar dosage, the solvents DES 2 and DES 3 displayed significant amoebicidal effects (P < 0.05), inhibited encystment and excystment, undermined the cell-mediated cytopathogenicity of A. castellanii, and also displayed minimal cytotoxicity to human cells. Conversely, the chemical components of these solvents: salicylic acid, trihexylamine, and trioctylamine showed minimal effects when tested individually. These results are very promising and to the best of our knowledge, are reported for the first time on the effects of deep eutectic solvents on amoebae. These results can be applied in the development of new formulations of novel contact lens disinfectants against Acanthamoeba castellanii.

Ionic Liquid Agar-Alginate Beads as a Sustainable Phenol Adsorbent.

Cleaning wastewater containing low concentrations of phenolic compounds is a challenging task. In this work, agar-alginate beads impregnated with trihexyltetradecylphosphonium bromide ([P66614][Br]) ionic liquid adsorbent were synthesized as a potential adsorbent for such applications. FTIR, TGA, SEM, EDX and PZC studies were performed to characterize and understand the physicochemical properties of the adsorbent. The Fourier transformation infrared spectroscopy (FTIR) study showed that [P66614][Br] ionic liquid was effectively incorporated into the agar-alginate structure. TGA and SEM confirmed comparative enhanced thermal stability and porous surface, respectively. Chemical reaction rate-altering parameters, i.e., pH, contact time, initial phenol concentration and temperature, are optimized at highest phenol removal. It was found that the maximum phenol adsorption capacity and highest removal efficiency by the adsorbent occurred at pH 2, initial phenol concentration of 150 mg/L, beads dosage of 6 mg/mL and contact time of 2 h with values of 16.28 mg/g and 65.12%, respectively. The pseudo-second order model fitted the adsorption kinetics well, and the Freundlich isotherm model gave the experimental data the best fit. Analysis of thermodynamic data demonstrated that the adsorption process is fundamentally exothermic in nature, and low temperature favors spontaneity of the chemical reaction. Regeneration studies indicated that the adsorbent can at least be used for four cycles in such applications without any considerable loss in adsorption efficiency.

Primary Amoebic Meningoencephalitis: Potential Application of Ionic Liquids Against Brain-Eating Amoebae?

Naegleria fowleri, a well-known brain-eating amoeba, induces high mortality with no available effective treatment. Ionic liquids are compounds that contain a variety of cations and anions that can be tailored to specific applications. Based on the biological, chemical and physical properties of these ionic liquids, this work proposes the use of ionic liquids as novel anti-Naegleria fowleri biocides.

Antibacterial effects of octadecyl trimethylammonium micelle-clay complex against bacterial eye pathogens: potential as a contact lens disinfectant.

AIM: In this study, we utilized a micelle-clay complex composed of the surfactant octadecyltrimethylammonium bromide and montmorillonite clay and evaluated its antibacterial effects. METHODS: Using Pseudomonas aeruginosa, Staphylococcus epidermidis, and Micrococcus luteus, bactericidal assays were performed to determine the effects of ODTMA-clay complex on the viability of bacterial pathogen at various doses and different intervals of time. Cytotoxicity assays were performed to investigate ODTMA-clay complex effects on human cells, as determined by release of intracellular lactate dehydrogenase. RESULTS: The results revealed that ODTMA-clay complex abolished bacterial viability at 100 µg/mL within 45 min against P. aeruginosa, S. epidermidis, and M. luteus. Cytotoxicity assays revealed that ODTMA-clay complex exhibited minimal toxicity of the human cells. CONCLUSION: Rapid and potent antibacterial effects of ODTMA micelle-clay complex were observed in vitro; however, research is needed to determine precise formulation of contact lens disinfectants comprising ODTMA micelle-clay complex. Additionally, studies should be conducted using in vivo models of keratitis, progressing to pre-clinical and clinical trials. ODTMA micelle-clay complex is an ideal candidate to be incorporated in a novel contact lens disinfectant given the cost-effectiveness and ease of application and can be incorporated as an effective preventative strategy.

Cerebral mucormycosis: intranasal route to deliver amphotericin B for effective management?

As cerebral mucormycosis is devastating in nature, here we discuss possible use of the intranasal route, in comparison to or in addition to intravenous administration, as a therapeutic approach to manage cases of mucormycosis with central nervous system involvement.

Cationic Surfactant-Natural Clay Complex as a Novel Agent Against Acanthamoeba castellanii Belonging to the T4 Genotype.

BACKGROUND: Acanthamoeba is a protozoan pathogen that is widely distributed in the environment. Given the opportunity, it can cause a serious eye infection known as Acanthamoeba keratitis as well as a fatal brain infection known as granulomatous amoebic encephalitis. Inappropriate use of contact lenses can contribute to contracting Acanthamoeba keratitis, and contact lens disinfectants are not always effective in eradicating Acanthamoeba. Therefore, there is a need to develop novel antimicrobial agents with efficient antiamoebic properties. OBJECTIVE: In this study, we tested octadecyltrimethylammonium (ODTMA)-clay (montmorillonite) complex as a novel antiamoebic agent. METHODS: Using A. castellanii belonging to the T4 genotype of keratitis origin, amobicidal assays were performed to determine the effects of ODTMA-cay complex on the viability of parasites at various concentrations ranging from 10 to 100 µg. Adhesion and cytopathogenicity assays were performed to investigate ODTMA effects on A. castellanii-mediated binding and damage to human cells. Encystation and excystation assays were conducted to establish ODTMA-mediated inhibitory effects against the cyst stage of A. castellanii. RESULTS: Using cell survival assays, the results revealed that ODTMA-clay complex exhibited amobicidal activity against keratitis-causing A. castellanii in a dose-dependent manner. Pretreatment of A. castellanii with ODTMA-clay complex inhibited parasite adhesion to as well as parasite-mediated human cell damage. Using encystation and excystation assays, it was revealed that ODTMA-clay complex inhibited A. castellanii cysts at 100 µg (P<0.05). CONCLUSION: To the best of our knowledge, for the first time, it was shown that ODTMA-clay complex exhibited anti-Acanthamoebic activities. The possibility of adding ODTMA-clay in a contact lens cleaning solution to formulate effective disinfectants is discussed further.

Potential Application of Vaporized Drugs via Nasal Inhalers to Prevent Mortality and Central Nervous System Damage Caused by Primary Amoebic Meningoencephalitis Due to Naegleria fowleri.

Here, it is proposed that nasal inhalers with specific anti-Naegleria fowleri drugs or a combination of anti-N. fowleri compounds combined with steroids such as dexamethasone could provide a practical solution for treating primary amoebic meningoencephalitis.

Dual Targeting of Function-Structure for Effective Killing of Pathogenic Free-Living Amoebae.

Here we discuss the potential value of targeting both the hardy structure of the cyst state of the parasite, in addition to the active trophozoite form, to provide target-directed inhibition as a viable drug strategy in the effective eradication of parasites.

Brain-Eating Amoebae in the United Arab Emirates?

Given the warm climate, excessive water-related recreational activities, and large Muslim population practicing ablution, it is surprising that primary amoebic meningoencephalitis is not reported in the United Arab Emirates. In a medical district, up to 43% of meningitis cases did not determine the causative organism, suggesting that cases likely go undiagnosed.

Group Contribution Estimation of Ionic Liquid Melting Points: Critical Evaluation and Refinement of Existing Models.

While several group contribution method (GCM) models have been developed in recent years for the prediction of ionic liquid (IL) properties, some challenges exist in their effective application. Firstly, the models have been developed and tested based on different datasets; therefore, direct comparison based on reported statistical measures is not reliable. Secondly, many of the existing models are limited in the range of ILs for which they can be used due to the lack of functional group parameters. In this paper, we examine two of the most diverse GCMs for the estimation of IL melting point; a key property in the selection and design of ILs for materials and energy applications. A comprehensive database consisting of over 1300 data points for 933 unique ILs, has been compiled and used to critically evaluate the two GCMs. One of the GCMs has been refined by introducing new functional groups and reparametrized to give improved performance for melting point estimation over a wider range of ILs. This work will aid in the targeted design of ILs for materials and energy applications.

Sustainable management of cut flowers waste by activation and its application in wastewater treatment technology.

Cut flowers and floral waste (CFW) is a major concern in the present era. This study emphasizes the reuse of cut flowers as a neat bioadsorbent and activated carbon (AC). The biomass from the cut flowers was utilized as a neat bioadsorbent for the removal of the antibiotic levofloxacin and lead ions from water. The results revealed that the neat bioadsorbent was able to remove 60% levofloxacin and 45% of lead ions. Upon chemical activation of the CFW (using KOH), almost all levofloxacin and more than 99% of lead ions were removed. Physical activation (using CO2) gave a material that removed 90% of levofloxacin and 85% of lead ions. The adsorption of levofloxacin and lead ions on all the adsorbents followed Langmuir isotherms and pseudo-second-order kinetic model. The results have been further explained via the prediction of interaction energies between the adsorbates and adsorbents using COSMO-RS simulation.