Enhanced Hot-Phonon Bottleneck Effect on Slowing Hot Carrier Cooling in Metal Halide Perovskite Quantum Dots with Alloyed A-Site.

A deep understanding of the effect of the A-site cation cross-exchange on the hot-carrier relaxation dynamics in perovskite quantum dots (PQDs) has profound implications on the further development of disruptive photovoltaic technologies. In this study, the hot carrier cooling kinetics of pure FAPbI3 (FA+ , CH(NH2 )2 + ), MAPbI3 (MA+ , CH3 NH3 + + ), CsPbI3 (Cs+ , Cesium) and alloyed FA0.5 MA0.5 PbI3 , FA0.5 Cs0.5 PbI3 , and MA0.5 Cs0.5 PbI3 QDs are investigated using ultrafast transient absorption (TA) spectroscopy. The lifetimes of the initial fast cooling stage (<1 ps) of all the organic cation-containing PQDs are shorter than those of the CsPbI3 QDs, as verified by the electron-phonon coupling strength extracted from the temperature-dependent photoluminescence spectra. The lifetimes of the slow cooling stage of the alloyed PQDs are longer under illumination greater than 1 sun, which is ascribed to the introduction of co-vibrational optical phonon modes in the alloyed PQDs. This facilitated efficient acoustic phonon upconversion and enhanced the hot-phonon bottleneck effect, as demonstrated by first-principles calculations.

Tripodal Triazatruxene Derivative as a Face-On Oriented Hole-Collecting Monolayer for Efficient and Stable Inverted Perovskite Solar Cells.

Hole-collecting monolayers have drawn attention in perovskite solar cell research due to their ease of processing, high performance, and good durability. Since molecules in the hole-collecting monolayer are typically composed of functionalized π-conjugated structures, hole extraction is expected to be more efficient when the π-cores are oriented face-on with respect to the adjacent surfaces. However, strategies for reliably controlling the molecular orientation in monolayers remain elusive. In this work, multiple phosphonic acid anchoring groups were used to control the molecular orientation of a series of triazatruxene derivatives chemisorbed on a transparent conducting oxide electrode surface. Using infrared reflection absorption spectroscopy and metastable atom electron spectroscopy, we found that multipodal derivatives align face-on to the electrode surface, while the monopodal counterpart adopts a more tilted configuration. The face-on orientation was found to facilitate hole extraction, leading to inverted perovskite solar cells with enhanced stability and high-power conversion efficiencies up to 23.0%.

The Effect of Increasing Nickel Content on the Microstructure, Hardness, and Corrosion Resistance of the CuFeTiZrNix High-Entropy Alloys.

In recent years, high-entropy alloys (HEAs) that contain fine grains of intermetallic compounds (IMCs) have gained increasing attention as they have been shown to exhibit both high mechanical strength and strong corrosion resistance. One such class of HEAs is that of CuFeTiZrNi alloys. In this study, we have investigated the effect of increasing Ni content on the microstructure, hardness, and corrosion resistance of the CuFeTiZrNix alloys (where x = 0.1, 0.3, 0.5, 0.8, 1.0 in a molar ratio). The alloys used in this study were prepared in an arc melting furnace and then annealed at 900 °C. First-principles calculations of the bulk modulus were also performed for each alloy. The results revealed that increasing the Ni content had several effects. Firstly, the microstructure of the CuFeTiZrNix alloys changed from B2_BCC and Laves_C14 in the CuFeTiZrNi0.1 and CuFeTiZrNi0.3 alloys to FCC, B2_BCC, and Laves_C14 in the CuFeTiZrNi0.5 alloys; and to FCC, B2_BCC, Cu51Zr14, and Laves_C14 in the CuFeTiZrNi0.8 and CuFeTiZrNi1.0 alloys. Secondly, IMCs arising from a combination of the refractory elements (Ti and Zr) and atomic size differences were found in the interdendritic region. Thirdly, as the Ni content in the CuFeTiZrNix alloys increased, the hardness decreased, but the corrosion resistance increased.

Electronic structure and thermal conductance of the MASnI3/Bi2Te3 interface: a first-principles study.

To develop high-performance thermoelectric devices that can be created using printing technology, the interface of a composite material composed of MASnI3 and Bi2Te3, which individually show excellent thermoelectric performance, was studied based on first-principles calculations. The structural stability, electronic state, and interfacial thermal conductance of the interface between Bi2Te3 and MASnI3 were evaluated. Among the interface structure models, we found stable interface structures and revealed their specific electronic states. Around the Fermi energy, the interface structures with TeII and Bi terminations exhibited interface levels attributed to the overlapping electron densities for Bi2Te3 and MASnI3 at the interface. Calculation of the interfacial thermal conductance using the diffuse mismatch model suggested that construction of the interface between Bi2Te3 and MASnI3 could reduce the thermal conductivity. The obtained value was similar to the experimental value for the inorganic/organic interface.

The Relationship between Crystal Structure and Mechanical Performance for Fabrication of Regenerated Cellulose Film through Coagulation Conditions.

Cellulose films regenerated from aqueous alkali-urea solution possess different properties depending on coagulation conditions. However, the correlation between coagulant species and properties of regenerated cellulose (RC) films has not been clarified yet. In this study, RC films were prepared from cellulose nanofiber (CNF) and microcrystalline cellulose (MCC) under several coagulation conditions. Cellulose dissolved in aqueous LiOH-urea solution was regenerated using various solvents at ambient temperature to investigate the effects of their dielectric constant on the properties of RC film. The crystal structure, mechanical properties, and surface morphology of prepared RC films were analyzed using X-ray diffraction (XRD), tensile tester, and atomic probe microscopy (AFM), respectively. It is revealed that the preferential orientation of (110) and (020) crystal planes, which are formed by inter- and intramolecular hydrogen bonding in cellulose crystal regions, changed depending on coagulant species. Furthermore, we found out that tensile strength, elongation at break, and crystal structure properties of RC films strongly correlate to the dielectric constant of solvents used for the coagulation process. This work, therefore, would be able to provide an indicator to control the mechanical performance of RC film depending on its application and to develop detailed researches on controlling the crystal structure of cellulose.

Bimetallic Sulfide SnS2/FeS2 Nanosheets as High-Performance Anode Materials for Sodium-Ion Batteries.

Transition-metal sulfide SnS2 has aroused wide concern due to its high capacity and nanosheet structure, making it an attractive choice as the anode material in sodium-ion batteries. However, the large volume expansion and poor conductivity of SnS2 lead to inferior cycle stability as well as rate performance. In this work, FeS2 was in situ introduced to synchronously grow with SnS2 on rGO to prepare a heterojunction bimetallic sulfide nanosheet SnS2/FeS2/rGO composite. The composition and distinctive structure facilitate the rapid diffusion of Na+ and improve the charge transfer at the heterogeneous interface, providing sufficient space for volume expansion and improving anode materials' structural stability. SnS2/FeS2/rGO bimetallic sulfide electrode boasts a capacity of 768.3 mA h g-1 at the current density of 0.1 A g-1, and 541.2 mA h g-1 at the current density of 1 A g-1 in sodium-ion batteries, which is superior to that of either single metal sulfide SnS2 or FeS2. TDOS calculation further confirms that the binding of FeS2/SnS2-Na is more stable than FeS2 and SnS2 alone. The superior electrochemical performance of the SnS2/FeS2/rGO composite material makes it a promising candidate for sodium storage.

Enhanced Device Performance with Passivation of the TiO2 Surface Using a Carboxylic Acid Fullerene Monolayer for a SnPb Perovskite Solar Cell with a Normal Planar Structure.

Research on tin-lead (SnPb) perovskite solar cells (PSCs) has gained popularity in recent years because of their low band gap, which could be applied to tandem solar cells. However, most of the work is based on inverted PSCs using PEDOT:PSS as the hole-transport layer as normal-structure PSCs show lower efficiency. In this work, the reason behind the low efficiency of normal-structure SnPb PSCs is elucidated and surface passivation has been tested as a method to overcome the problem. In the case of normal PSCs, at the interface between the titania layer and SnPb perovskite, there are many carrier traps observed originating from Ti-O-Sn bonds. In order to avoid the direct contact between titania and the SnPb perovskite layer, the titania surface is passivated with carboxylic acid C60 resulting in an efficiency increase from 5.14 to 7.91%. This will provide a direction of enhancing the efficiency of the normal-structure SnPb PSCs through heterojunction engineering.

Suppression of Charge Carrier Recombination in Lead-Free Tin Halide Perovskite via Lewis Base Post-treatment.

Lead-free tin perovskite solar cells (PSCs) show the most promise to replace the more toxic lead-based perovskite solar cells. However, the efficiency is significantly less than that of lead-based PSCs as a result of low open-circuit voltage. This is due to the tendency of Sn2+ to oxidize into Sn4+ in the presence of air together with the formation of defects and traps caused by the fast crystallization of tin perovskite materials. Here, post-treatment of the tin perovskite layer with edamine Lewis base to suppress the recombination reaction in tin halide PSCs results in efficiencies higher than 10%, which is the highest reported efficiency to date for pure tin halide PSCs. The X-ray photoelectron spectroscopy data suggest that the recombination reaction originates from the nonstoichiometric Sn:I ratio rather than the Sn4+:Sn2+ ratio. The amine group in edamine bonded the undercoordinated tin, passivating the dangling bonds and defects, resulting in suppressed charge carrier recombination.

Relationship between Lattice Strain and Efficiency for Sn-Perovskite Solar Cells.

In the composition of Q0.1(FA0.75MA0.25)0.9SnI3, Q is replaced with Na+, K+, Cs+, ethylammonium+ (EA+), and butylammonium+ (BA+), respectively, and the relationship between actually measured lattice strain and photovoltaic performances is discussed. The lattice strain evaluated by the Williamson-hall plot of X-ray diffraction data decreased as the tolerance factor was close to one. The efficiency of the Sn-perovskite solar cell was enhanced as the lattice strain decreased. Among them, EA0.1(FA0.75MA0.25)0.9SnI3 having lowest lattice strain gave the best result of 5.41%. Because the carrier mobility increased with a decrease in the lattice strain, these lattice strains would disturb carrier mobility and decrease the solar cell efficiency. Finally, the results that the efficiency of the SnGe-perovskite solar cells was gradually enhanced from 6.42 to 7.60% during storage, was explained by the lattice strain relaxation during the storage.

An unconventional hydrogen effect that suppresses thermal formation of the hcp phase in fcc steels.

Iron and steels are extensively used as structural materials, and have three primary phase structures: Body-centered cubic (bcc), face-centered cubic (fcc), and hexagonal closed-packed (hcp). Controlling phase stabilities, especially by the use of interstitials, is a universal method that provides a diverse variety of functional and mechanical properties in steels. In this context, hydrogen, which can act as an interstitial species in steels, has been recognized to promote phase transformation from fcc to hcp. However, we here report a dramatic effect of interstitial hydrogen that suppresses this hcp phase transformation. More specifically, the fraction of hcp phase that forms during cooling decreases with increasing diffusible hydrogen content. This new finding opens new venues for thermodynamics-based microstructure design and for development of robust, strong, and ductile steels in hydrogen-related infrastructures.

Solution-Processed Air-Stable Copper Bismuth Iodide for Photovoltaics.

Bismuth-based solar cells have been under intensive interest as an efficient non-toxic absorber in photovoltaics. Within this new family of semiconductors, we herein report a new, long-term stable copper bismuth iodide (CuBiI4 ). A solutionprocessed method under air atmosphere is used to prepare the material. The adopted HI-assisted dimethylacetamide (DMA) co-solvent can completely dissolve CuI and BiI3 powders with high concentration compared with other organic solvents. Moreover, the high vapor pressure of tributyl phosphate, selected for the solvent vapor annealing (SVA), enables complete low-temperature (≤70 °C) film preparation, resulting in a stable, uniform, dense CuBiI4 film. The average grain size increases with the precursor concentration, greatly improving the photoluminescence lifetime and hall mobility; a carrier lifetime of 3.03 ns as well as an appreciable hall mobility of 110 cm2 V-1 s-1 were obtained. XRD illustrates that the crystal structure is cubic (space group Fd3m) and favored in the [1 1 1] direction. Moreover, the photovoltaic performance of CuBiI4 was also investigated. A wide bandgap (2.67 eV) solar cell with 0.82 % power conversion efficiency is presented, which exhibits excellent long-term stability over 1008 h under ambient conditions. This air-stable material may give an application in future tandem solar cells as a stable short-wavelength light absorber.

Mixed Sn-Ge Perovskite for Enhanced Perovskite Solar Cell Performance in Air.

Lead-based perovskite solar cells have gained ground in recent years, showing efficiency as high as 20%, which is on par with that of silicon solar cells. However, the toxicity of lead makes it a nonideal candidate for use in solar cells. Alternatively, tin-based perovskites have been proposed because of their nontoxic nature and abundance. Unfortunately, these solar cells suffer from low efficiency and stability. Here, we propose a new type of perovskite material based on mixed tin and germanium. The material showed a band gap around 1.4-1.5 eV as measured from photoacoustic spectroscopy, which is ideal from the perspective of solar cells. In a solar cell device with inverted planar structure, pure tin perovskite solar cell showed a moderate efficiency of 3.31%. With 5% doping of germanium into the perovskite, the efficiency improved up to 4.48% (6.90% after 72 h) when measured in air without encapsulation.

Development of Organo-Dispersible Graphene Oxide via Pseudo-Surface Modification for Thermally Conductive Green Polymer Composites.

Graphene has attracted lots of researchers attention because of its remarkable conductivity in both electrically and thermally. However, it has poor dispersibility in organic solvents which limited its applications. Polymers with aromatic end group which act as an intercalator were prepared by ring-opening polymerization with ε-caprolactone by utilizing 1-naphthalene methanol (1-NM) as an initiator. These intercalators will exist between graphene oxide (GO) sheets to prevent aggregation via interactions. The attachment of 1-NM on polymer chains was supported by ultraviolet-visible spectra, size exclusion chromatography profiles, and 1H nuclear magnetic resonance spectra. Exfoliated structured functionalized GO (fGO)/polycaprolactone (PCL) (synthesized fGO) nanocomposites that dispersed well in acetone, chloroform, N,N-dimethylformamide, dimethyl sulfoxide, tetrahydrofuran, and toluene were successfully synthesized. This agreed well with the enlarged interlayer spacing in the optimized fGO as compared to that of GO from density functional theory simulations using the DMol3 module that implemented in the Materials Studio 6.0. Furthermore, its potential to be applied as green electronics in electronics, aerospace, and automotive industries was presented, by trailering the thermal conductivity enhancement from the incorporation of fGO/PCL with commercialized biodegradable polymers, PCL, and poly[(R)-3-hydroxybutyric acid].

Deposition of hydroxyapatite on SiC nanotubes in simulated body fluid.

SiC nanotubes can become candidate reinforcement materials for dental and orthopedic implants due to their light weight and excellent mechanical properties. However, the development of bioactive SiC materials has not been reported. In this study, hydroxyapatites were found on SiC nanotubes treated with NaOH and subsequently HCl solution after soaking in simulated body fluid. On the other hand, hydroxyapatites did not deposit on as-received SiC nanotubes, the SiC nanotubes with NH4OH solution treatment and SiC bulk materials with NaOH and subsequently HCl solution treatment. Therefore, we succeeded in the development of bioactive SiC nanotubes by downsizing SiC materials to nanometer size and treating with NaOH and subsequently HCl solutions for the first time.

Origin of the monoclinic-to-monoclinic phase transition and evidence for the centrosymmetric crystal structure of BiMnO3.

Structural properties of polycrystalline single-phased BiMnO3 samples prepared at 6 GPa and 1383 K have been studied by selected area electron diffraction (SAED), convergent beam electron diffraction (CBED), and the Rietveld method using neutron diffraction data measured at 300 and 550 K. The SAED and CBED data showed that BiMnO3 crystallizes in the centrosymmetric space group C2/c at 300 K. The crystallographic data are a = 9.5415(2) A, b = 5.61263(8) A, c = 9.8632(2) A, beta = 110.6584(12) degrees at 300 K and a = 9.5866(3) A, b = 5.59903(15) A, c = 9.7427(3) A, beta = 108.601(2) degrees at 550 K, Z = 8, space group C2/c. The analysis of Mn-O bond lengths suggested that the orbital order present in BiMnO3 at 300 K melts above TOO = 474 K. The phase transition at 474 K is of the first order and accompanied by a jump of magnetization and small changes of the effective magnetic moment and Weiss temperature, mueff = 4.69 microB and theta = 138.0 K at 300-450 K and mueff = 4.79 microB and theta = 132.6 K at 480-600 K.

Finite size effects of nanoparticles on the atomic pair distribution functions.

The finite size effects of nanoparticles on the atomic pair distribution functions (PDF) are discussed by calculating the radial distribution functions (RDF) on nanoparticles with various shapes, such as sheet, belt, rod, tube and sphere, assuming continua. Their characteristics are shown depending on the shapes and the sizes of the nanoparticles. The formulas of a PDF analysis which take account of such effects are presented and are found to reproduce the experimental data.

BiScO3: centrosymmetric BiMnO3-type oxide.

With neutron powder diffraction, electron diffraction, and second-harmonic generation, we have shown that BiScO3 has a structure closely related to that of multiferroic BiMnO3, but BiScO3 crystallizes in the centrosymmetric space group of C2/c. These results bring up a question about the origin of ferroelectricity in BiMnO3. BiScO3 may serve as a model system to understand the role of Mn3+ ions in the ferroelectricity of BiMnO3.