Effect of Location, Disinfection, and Building Materials on the Presence and Richness of Culturable Mycobiota through Oligotrophic Drinking Water Systems.

Safe drinking water is a constant challenge due to global environmental changes and the rise of emerging pathogens-lately, these also include fungi. The fungal presence in water greatly varies between sampling locations. Little is known about fungi from water in combination with a selection of materials used in water distribution systems. Our research was focused on five water plants located in the Pannonian Plain, Slovenia. Sampled water originated from different natural water sources and was subjected to different cleaning methods before distribution. The average numbers of fungi from natural water, water after disinfection, water at the first sampling point in the water network, and water at the last sampling point were 260, 49, 64, and 97 CFU/L, respectively. Chlorination reduced the number of fungi by a factor of 5, but its effect decreased with the length of the water network. The occurrence of different fungi in water and on materials depended on the choice of material. The presence of the genera Aspergillus, Acremonium, Furcasterigmium, Gliomastix, and Sarocladium was mostly observed on cement, while Cadophora, Cladosporium, Cyphellophora, and Exophiala prevailed on metals. Plastic materials were more susceptible to colonization with basidiomycetous fungi. Opportunistically pathogenic fungi were isolated sporadically from materials and water and do not represent a significant health risk for water consumers. In addition to cultivation data, physico-chemical features of water were measured and later processed with machine learning methods, revealing the sampling location and water cleaning processes as the main factors affecting fungal presence and richness in water and materials in contact with water.

Trace metals and macrominerals in common seaweeds in the Marchica (a restored lagoon, Mediterranean Sea): Nutritional value and health risk assessment.

This study investigated the contents of macrominerals (Na, K, Ca, Mg and P) and essential trace metals (Fe, Mn, Cu, Zn and Se) in four species of seaweeds (Gracilaria sp., Alsidium corallinum, Caulerpa prolifera, and Chaetomorpha sp.) from Marchica Lagoon. The contents of macrominerals with mean values (% dw) can be sequenced in this descending order, [Ca > Mg > Na > K > P] for Caulerpa prolifera, and the decreasing sequence [K > Ca > Mg > P > Na] for Chaetomorpha sp. In red seaweeds, Gracilaria sp. and Alsidiumcorallinum followed these orders: [K > Ca > Na > Mg > P] and [K > Na > Ca > Mg > P] respectively. The essential trace metals mean values (mg kg-1) followed the decreasing order [Fe > Mn > Zn > Cu > Se] for Alsidiumcorallinum, Chaetomorpha sp. and Gracilaria sp., and the following order [Fe > Mn > Zn > Se > Cu] for Caulerpa prolifera. Based on the calculated recommended dietary allowance (RDA), targeted hazard quotient (THQ) and the hazard index (HI), the studied seaweeds did not pose any health risk for human consumption.

Honey Origin Authentication via Mineral Profiling Combined with Chemometric Approaches.

In the present study, the potential of elemental analysis combined with statistical tools to identify honey origin was evaluated by mineral characterization of 173 honeys of 13 floral types (acacia, fir, spruce, linden, chestnut, lavender, coriander, thistle, honeydew, rosemary, sage, euphorbia and ziziphus plant species) collected from five geographical regions (Slovenia, Croatia, Bulgaria, Turkey, and Morocco). The objective of the study was to accurately and reliably differentiate the mineral composition among honey varieties. The aim was to establish traceability, to ensure product authenticity and to improve quality control measures within the honey industry. For this purpose, 18 major, minor and trace elements were quantified using microwave digestion, followed by ICP-MS measurement. Statistical evaluation of elemental concentration was undertaken using principal component analysis (PCA) to distinguish honey floral types. The research give light on the specific elements that can serve as indicators for determining the geographical and botanical source of honey. Our findings indicate that certain elements, such as Mn, K, and Ca, are primarily influenced by the type of pollen present in the honey, making them indicative of the floral source. On the other hand, levels of Na, Mg, and Fe were found to be more strongly influenced by environmental factors and can be considered as markers of geographical origin. One novel aspect of this research is the exploration of the relationship between honey minerals and honey botanical source. This was achieved through the analysis of chestnut tree samples and a subsequent comparison with the composition of chestnut honey.

A study of the adsorption of titanium dioxide and zinc oxide nanoparticles on polyethylene microplastics and their desorption in aquatic media.

In this study, we investigated the interactions between titanium dioxide (nTiO2) and zinc oxide (nZnO) nanoparticles and polyethylene microplastics (MPs) with respect to their adsorption and subsequent desorption in aquatic media. Adsorption kinetic models revealed rapid adsorption of nZnO compared to nTiO2, while nTiO2 was adsorbed to a greater extent - four times more nTiO2 (67%) was adsorbed on MPs than nZnO (16%). The low adsorption of nZnO can be explained by the partial dissolution of zinc from nZnO in the form of Zn(II) and/or Zn(II) aqua-hydroxo complexes (e.g. [Zn(OH)]+, [Zn(OH)3]-, [Zn(OH)4]2-), which were not adsorbed on MPs. Adsorption isotherm models indicated that the adsorption process is controlled by physisorption for both nTiO2 and nZnO. The desorption of nTiO2 was low (up to 27%) and not pH dependent, and only nanoparticles were desorbed from the MPs surface. On the other hand, the desorption of nZnO was pH dependent; at a slightly acidic pH (pH = 6), 89% of the adsorbed zinc was desorbed from the MPs surface and the majority were in the form of nanoparticles; at a slightly alkaline pH (pH = 8.3), 72% of the zinc was desorbed, but the majority were in the soluble form of Zn(II) and/or Zn(II) aqua-hydroxo complexes. These results demonstrated the complexity and variability of interactions between MPs and metal engineered nanoparticles and contribute to a better understanding of their fate in the aquatic environment.

Evaluation of Sediments from the River Drava and Their Potential for Further Use in the Building Sector.

Sedimentation is a naturally occurring process of allowing particles in water bodies to settle out of the suspension under a gravity effect. In this study, the sediments of the Drava River were fully investigated to determine the heavy metal concentrations along the river and their potential reuse in the construction sector. Naturally dehydrated sediments from the Drava River were tested as an additive for the production of fired bricks. The dredged sediments were used as a substitute for natural brick clay in amounts up to 50% by weight, and it was confirmed that up to 20% by weight of the added sediment could be used directly in the process without critically affecting performance. Finally, the naturally dehydrated sediments were also evaluated for their use as a filling material in the construction of levees. The natural moisture content of the dehydrated sediment was too high for it to be used without additives, so quicklime was added as an inorganic binder. The test results showed an improvement in the geotechnical properties of the material to such an extent that it is suitable as a filling material for levees.