Thermal degradation of driftwood: Determination of the concentration of sodium, calcium, magnesium, chlorine and sulfur containing compounds.

The annual production of driftwood in Italy has been estimated to be more than 60,000 tonnes. This wood can be used as an energy source. Particular attention should be paid to its content of alkali and alkaline earth metals, sulfur and chlorine. Few works are available in the literature on this topic. For this reason, the authors propose experimental tests of combustion, gasification and pyrolysis, to evaluate the fate of alkali and alkaline earth metals, sulfur and chlorine in the solid residues and compare the three thermal degradation technologies. The results show a release of alkaline earth metals of about 45% of the initial quantity for gasification and a release of 55% of the initial quantity for combustion (while pyrolysis at 600°C has a very low release). The release of sodium is about 65% for gasification and 80% for combustion. It can be seen that the release of sodium is higher than that of alkaline earth metals; this is due to the divalency of the last ones. Dealing with the release of major elements (chlorine, sulfur and AAEMs) the tests have shown that pyrolysis process is a low emitting technology.

Distribution and factors associated with salivary secretory leukocyte protease inhibitor concentrations.

OBJECTIVES: This cross-sectional study examined the distribution and correlates of salivary secretory leukocyte protease inhibitor (SLPI) concentrations within a multinational cohort of men. METHODS: Extracellular SLPI was measured in oral gargle cell supernatants of 378 men from three countries using an ELISA-based assay. Risk factor data were collected by a questionnaire. Factors associated with SLPI were assessed using linear and logistic regression for continuous and categorical SLPI, respectively. RESULTS: Among men aged 18-73 years, the median SLPI concentration was 492.0 ng ml-1 (range: 2.3-1919.9). In multivariable modeling, men in Brazil and younger men (18-30 years) were more likely to have higher levels of SLPI [adjusted odds ratio (aOR) 3.84; 95% confidence interval (CI): 1.94-7.59, and aOR 3.84; 95% CI: 1.98-7.43, respectively]. Men with a self-reported sexually transmitted diseases diagnosis in the past 6 months were more likely to have higher SLPI levels (aOR 2.98; 95% CI: 1.1-7.83) and men reporting bleeding/swollen gums were less likely to have higher SLPI (aOR 0.34; 95% CI: 0.15-0.79). Similar results were observed for linear regression models. CONCLUSIONS: Secretory leukocyte protease inhibitor concentrations varied significantly by country and decreased with increasing age. The interaction between SLPI, modifiable factors, and oral infections that influence cancer risk warrants further investigation.

ISO 10993, Part 18: A structured approach to material characterisation.

A well-constructed and executed biological risk analysis can provide a level of assurance that a particular material can be safely used for a medical device. If the data needed to conduct this analysis are not readily available, ISO 10993 Part 18 outlines a framework for the programme of tests required to chemically characterise the materials and generate the information. Companies involved in the specification of materials for new medical devices should prepare for the introduction of Part 18 by reviewing their relationships with material suppliers, assessing the scope and detail of the information that is available and making provision for any additional testing requirements that may be required.

The stereospecificity of alpha-chymotrypsin.

1. The rates of deacylation of acyl-alpha-chymotrypsins in which the hydrogen-bonding capacity of the acylamino group of the substrate has been systematically removed were measured. 2. The ratio of deacylation rates of l- and d-acyl-enzymes is found to depend largely on the existence in the substrate of an amido -NH- group. 3. The data presented agree with the postulate that the stereospecificity of alpha-chymotrypsin is exercised in catalytic rather than binding steps, and that the active site of the enzyme presents three loci to the substrate: the site containing the catalytic functionalities (including serine-195), the hydrophobic area for amino acid side-chain binding, and a hydrogen-bond acceptor site for acylamino group binding. 4. It is noted that, though the hydrogen-bonding site is crucial for the stereospecificity, the free energy of binding of substrates and inhibitors is dominated by the hydrophobic interaction. 5. It is tentatively proposed that alpha-chymotrypsin selects a high-energy conformation of the substrate when the latter binds at the enzyme's active site.

Specificity and stereospecificity of alpha-chymotrypsin.

1. The optically pure p-nitrophenyl esters of the d and l enantiomers of N-acetyl-tryptophan, N-acetylphenylalanine and N-acetyl-leucine, and the p-nitrophenyl ester of N-acetylglycine, have been prepared. 2. These materials are all substrates of alpha-chymotrypsin, and the rates of deacylation of the corresponding acyl-alpha-chymotrypsins have been determined. 3. As the size of the amino acid side chain increases, the l series deacylate progressively faster than the N-acetylglycyl-enzyme, and the d series progressively more slowly. 4. The results are interpreted in terms of a three-locus model of the enzyme's active site, which accounts for the interrelationship between substrate specificity and stereospecificity observed. 5. The concepts of negative specificity and of specificity saturation are introduced.

The alpha-chymotryptic ydrolysis of glycine esters.

1. The alpha-chymotrypsin-catalysed hydrolysis of N-acetylglycine ethyl and thiolethyl esters was investigated at pH7.90 and 25 degrees over a wide range of substrate concentrations. 2. The Lineweaver-Burk plots for these substrates are markedly curved, and it is shown that the curvature is due solely to the ;enzyme-blank' reaction. The rate of this reaction is proportional to free enzyme concentration in the range 10-100mum, with a pseudo-first-order rate constant of approx. 1x10(-3)sec.(-1). Correction for this reaction by the procedure described leads to linear plots. It is shown that the significance of the enzyme-blank reaction depends on the value of k(0)/K(m) for the substrate under investigation. 3. Interpretation of the curvature in the Lineweaver-Burk plots by previous workers in terms of activation by excess of substrate is shown to be erroneous. 4. Values of K(m) 387mm and k(0) 0.039sec.(-1), and K(m) 41mm and k(0) 0.23sec.(-1), were obtained for the ethyl and thiolethyl esters of N-acetylglycine respectively. The literature values for the methyl esters of N-acetyl- and N-propionyl-glycine have been corrected by the procedure described. The new values agree much better with current theories of alpha-chymotrypsin mechanism and specificity. 5. The kinetic parameters for the ethyl and thiolethyl esters indicate the absence of an electrophilic component in the catalytic mechanism of alpha-chymotrypsin, and the importance of the ester function in substrate binding.