Nanoparticulation of probucol, a poorly water-soluble drug, using a novel wet-milling process to improve in vitro dissolution and in vivo oral absorption.

To improve the dissolution and oral absorption properties of probucol, a novel wet-milling process using the ULTRA APEX MILL was investigated. The particle size of bulk probucol powder was 17.1 µm. However, after wet-milling with dispersing agents such as Gelucire 44/14, Gelucire 50/13, vitamin E-TPGS, and Pluronic F-108, the probucol particle sizes decreased to about 77-176 nm. Scanning electron microscopy (SEM) analysis also suggested that the probucol particles were successfully milled into the nanometer range. An in vitro dissolution study showed that the dissolution rates of all nanopowders were several folds higher than those of the corresponding mixed powders. When orally administered to rats, the AUC values of probucol nanopowders treated with Gelucire 44/14 and 50/13, and vitamin E-TPGS were about 3.06-3.54-folds greater than that of the bulk powder. Therefore, through this study, we have developed a new pharmaceutical technique to improve the dissolution rate and oral absorption of probucol using the ULTRA APEX MILL by wet-milling with various dispersing agents.

Nanoparticulation of poorly water soluble drugs using a wet-mill process and physicochemical properties of the nanopowders.

In order to improve the dissolution and oral absorption properties of poorly water soluble drugs such as omeprazole, albendazole and danazol, various dispersing agents were added to prepare nanopowder formulations using an ULTRA APEX MILL, which is a wet-mill instrument, and their physicochemical properties were evaluated. Using Pluronic F-108 or F-68 as dispersing agents, slurries containing drug particles having nanometer size were obtained for all model drugs tested. Omeprazole, a heat labile drug, was not degraded by wet-milling and the omeprazole nanoparticles in a milled slurry did not aggregate for 24 h after wet-milling. After lyophilization of these milled slurries containing drug nanoparticles, fine solid white nanopowders were obtained. Scanning electron microscopy (SEM) suggested that the model drugs were milled into nanometer size. X-ray powder diffraction (XRPD) patterns and Differential Scanning Calorimetry (DSC) curves confirmed that all milled drug nanopowders were crystalline, although milling of albendazole nanopowder transformed it to another crystal form. Wet-milling using an ULTRA APEX MILL offers a highly effective approach to produce stable drug nanopowders and is a very useful tool for bioavailability enhancement of poorly water soluble and heat labile drugs.

Experimental investigation of nanoparticle dispersion by beads milling with centrifugal bead separation.

A new type of beads mill for dispersing nanoparticles into liquids has been developed. The bead mill utilizes centrifugation to separate beads from nanoparticle suspensions and allows for the use of small sized beads (i.e. 15-30 microm in diameter). The performance of the beads mill in dispersing a suspension of titanium dioxide nanoparticle with 15 nm primary particles was evaluated experimentally. Dynamic light scattering was used to measure titania particle size distributions over time during the milling process, and bead sizes in the 15-100 microm range were used. It was found that larger beads (50-100 microm) were not capable of fully dispersing nanoparticles, and particles reagglomerated after long milling times. Smaller beads (15-30 microm) were capable of dispersing nanoparticles, and a sharp peak around 15 nm in the titania size distribution was visible when smaller beads were used. Because nanoparticle collisions with smaller beads have lower impact energy, it was found by X-ray diffraction and transmission electron microscopy that changes in nanoparticle crystallinity and morphology are minimized when smaller beads are used. Furthermore, inductively-coupled plasma spectroscopy was used to determine the level of bead contamination in the nanoparticle suspension during milling, and it was found that smaller beads are less likely to fragment and contaminate nanoparticle suspensions. The new type of beads mill is capable of effectively dispersing nanoparticle suspensions and will be extremely useful in future nanoparticle research.