The Relationship of Cup Inclination and Anteversion in the Coronal Plane with Ante-Inclination in the Sagittal Plane: Exposing the Fallacy of Cup Safe Zones.

Background: This study aimed to establish an equation for calculating cup ante-inclination (AI) from radiographic cup inclination and anteversion, to validate this equation in a total hip arthroplasty (THA) cohort, and to test whether achieving previously described radiographic cup inclination and anteversion targets would also satisfy sagittal cup AI targets. Methods: A mathematical equation linking cup AI, radiographic inclination (RI), and anteversion (RA) was determined: tan(AI) = tan(RA)/cos(RI). Supine and standing anteroposterior and lateral radiographs of 440 consecutive THAs were assessed to measure cup RI and RA and spinopelvic parameters, including cup AI, using a validated software tool. Whether orientation within previously defined RI and RA targets was associated with achieving the AI target and satisfying the sagittal component orientation (combined sagittal index, 205° to 245°) was tested. Results: The cups in the THA cohort had a measured mean inclination (and standard deviation) of 43° ± 7°, anteversion of 26° ± 9°, and AI of 34° ± 10°. The calculated cup AI was 34° ± 12°. A strong correlation existed between measured and calculated AI (r = 0.75; p < 0.001), with a mean error of 0° ± 8°. The inclination and anteversion targets were both satisfied in 194 (44.1%) to 330 (75.0%) of the cases, depending on the safe zone targets that were used, and 311 cases (70.7%) satisfied the AI target. Only 125 (28.4%) to 233 (53.0%) of the cases satisfied the AI target as well as the inclination and anteversion targets. Satisfying inclination and anteversion targets was not associated with increased chances of satisfying the AI target. Conclusions: Achieving optimal cup inclination and anteversion does not ensure optimal orientation in the sagittal plane. The equation and nomograms provided can be used to determine and visualize how the 2 planes used for evaluating the cup orientation and the pertinent angles relate, potentially aiding in preoperative planning.

How Do Spinopelvic Characteristics Change Post-Total Hip Arthroplasty? A Longitudinal Assessment Raising Awareness of the Postoperative Period.

BACKGROUND: Spinopelvic characteristics, including sacral slope (SS), are commonly evaluated in different positions pre-total hip arthroplasty (THA). This study aimed to: 1) investigate the change in spinopelvic parameters at 7 days (early) and 1-year post-THA; and 2) identify patient characteristics associated with a change in SS of more than 7° post-THA. METHODS: We prospectively studied 250 patients who underwent unilateral THA [132 women, age 66 years (range, 32 to 88)] and underwent biplanar images preoperatively and at 7 days and 1-year post-THA. Parameters measured included pelvic incidence, standing lumbar lordosis, SS, and proximal femoral angle (PFA). A SS change ≥ 7° was considered the threshold as it would result in more than a 5° change in cup orientation. RESULTS: Early post-THA SSstanding remained within ± 6º from preoperative measurements in 75% of patients, reduced by ≥ 7° in 9%, and increased by ≥ 7° in 16%. Those that showed a reduction in SS had the lowest PFA and the highest SS pre-THA (P = .028, .107, and < 0.001, respectively). From 7 days until the 1-year mark, pelvic tilt increased, SS reduced (mean: -4º, range: -29 to 17º, P < .001), and patients stood with greater hip extension ΔPFAstanding (mean 7°, range: -34 to 37°, P < .001). At 1 year, SSseated had remained within ± 6º, relative to the pre-THA value, in 49% of patients. CONCLUSIONS: Standing spinopelvic characteristics, especially SSstanding, remain within ±6° in three-quarters of patients both early- and at 1-year post-THA. In the remaining cases, pelvic tilt changes significantly. In 9% of cases, SS reduces ≥ 7° early THA, probably due to the alleviation of fixed-flexion contractures. The SSseated changes by ≥ ± 7° in almost 50% of cases in this study, and its clinical value as a preoperative planning tool should be questioned. LEVEL OF EVIDENCE: Level II, diagnostic study.

Reply to Alt et al. Comment on "Lunz et al. Impact and Modification of the New PJI-TNM Classification for Periprosthetic Joint Infections. J. Clin. Med. 2023, 12, 1262".

We greatly appreciate the comments made by Alt et al. [...].

What Is the Correlation between Clinical and Radiographic Findings in Patients with Advanced Osteoarthritis of the Knee?

Knee range of motion and patient-reported outcome measures (PROMs) are often used as screening tools to assess the severity of knee osteoarthritis and guide the decision to refer patients to an arthroplasty clinic. However, there is little understanding regarding the correlation between these factors. Thus, the purpose of this study was to determine the correlation between patient-reported clinical function measured with the Oxford Knee Score (OKS), pain assessed using the visual analog scale (VAS), knee range of motion (ROM), and characteristic radiographic features in patients with advanced osteoarthritis of the knee. A prospective analysis of a consecutive series of 138 patients with advanced unilateral osteoarthritis (OA) of the knee was performed. The severity of radiographic OA was classified according to the most commonly used Kellgren and Lawrence classification (K&L). Spearman's rank correlation analysis and multiple linear regression analysis were performed. The OKS was used as a dependent variable and was adjusted for pain, ROM, and nine standardized radiographic parameters on multiple views of the tibiofemoral and patellofemoral joint. OKS and pain correlated weakly with the K&L grade (r = -0.289; p = 0.001; r = 0.258; p = 0.002). K&L grade and the degree of patellofemoral joint space narrowing were identified as independent factors being associated with a poorer OKS (coefficient -4.528, p = 0.021; coefficient -2.211, p = 0.038). Slightly worse results were identified for OKS and pain in patients with K&L grade 4 osteoarthritis compared to patients with K&L grade 3 osteoarthritis (∆OKS 5.5 points, p < 0.001; ∆VAS 1.7 points, p = 0.003). There was no significant difference for passive range of motion between patients with K&L grade 3 or 4. When counseling patients with advanced knee osteoarthritis who may be eligible for knee arthroplasty, it is essential to give primary consideration to pain levels and self-reported limitations experienced during daily activities. Relying solely on knee ROM and PROMs is not an effective screening method for guiding the decision to refer patients to an arthroplasty clinic.

Minimum 20-year follow-up of a press-fit acetabular cup in cementless total hip replacement in young patients.

PURPOSE: We aimed to determine the minimum 20-year survival rates of a cementless press-fit cup in young patients. PATIENTS AND METHODS: This is a retrospective, single-center, multi-surgeon cohort study investigating the minimum 20-year clinical and radiological outcome of the first 121 consecutive total hip replacements (THRs) using a cementless, press-fit cup (Allofit, Zimmer, Warsaw, IN, USA) performed between 1999 and 2001. 28-mm metal-on-metal (MoM) and ceramic-on-conventionally not highly crosslinked polyethylene (CoP) bearings were used in 71% and 28%, respectively. Median patient age at surgery was 52 (range 21-60) years. Kaplan-Meier survival analysis was conducted for different endpoints. RESULTS: The 22-year survival rate for the endpoint aseptic cup or inlay revision was 94% (95% confidence interval [CI] 87-96) and 99% (CI 94-100) for aseptic cup loosening. 20 patients (21 THRs; 17%) had died and 5 (5 THRs; 4%) were lost to follow-up. No THR showed evidence of radiographic cup loosening. Osteolysis was observed in 40% of THRs with MoM and 77% with CoP bearings. 88% of THRs with CoP bearings showed significant polyethylene wear. CONCLUSION: The investigated cementless press-fit cup, which is still in clinical use today, showed excellent long-term survival rates in patients under the age of 60 years at surgery. However, osteolysis due to polyethylene and metal wear was frequently observed and is a matter of concern in the third decade after surgery.

How is hip anatomy reconstruction and inlay wear associated up to 10 years after primary THA using ceramic on highly crosslinked polyethylene bearings?

INTRODUCTION: Conventional polyethylene (PE) wear has been reported to be associated with femoral offset reconstruction and cup orientation after THA. Thus, the present study aimed (1) to determine the polyethylene wear rate of 32 mm ceramic heads with highly cross-linked polyethylene (HXLPE) inlays up to 10 years postoperatively and (2) to identify patient and surgery-related factors affecting the wear rate. METHODS: A prospective cohort study was performed, investigating 101 patients with 101 cementless THAs and ceramic (32 mm) on HXLPE bearings after 6-24 months, 2-5 years and 5-10 years postoperatively. The linear wear rate was determined using a validated software (PolyWare®, Rev 8, Draftware Inc, North Webster, IN, USA) by two reviewers, blinded to each other. A linear regression model was used to identify patient and surgery-related factors on HXLPE -wear. RESULTS: After an initial bedding-in phase of 1 year after surgery, the mean linear wear rate was 0.059 ± 0.031 mm/y at ten years (mean 7.7 years; SD 0.6 years, range 6-10), being below the osteolysis relevant threshold of 0.1 mm/year. The regression analysis demonstrated that age at surgery, BMI, cup inclination or anteversion and the UCLA score were not associated with the linear HXLPE-wear rate. Only increased femoral offset showed a significant correlation with an increased HXLPE-wear rate (correlation coefficient of 0.303; p = 0.003) with a moderate clinical effect size (Cohen's f²=0.11). CONCLUSION: In contrast to conventional PE inlays, hip arthroplasty surgeons may be less concerned about osteolysis-related wear of the HXLPE if the femoral offset is slightly increased. This allows focusing on joint anatomy reconstruction, hip stability and leg length.

Impact and Modification of the New PJI-TNM Classification for Periprosthetic Joint Infections.

The comprehensive "PJI-TNM classification" for the description of periprosthetic joint infections (PJI) was introduced in 2020. Its structure is based on the well-known oncological TNM classification to appreciate the complexity, severity, and diversity of PJIs. The main goal of this study is to implement the new PJI-TNM classification into the clinical setting to determine its therapeutic and prognostic value and suggest modifications to further improve the classification for clinical routine use. A retrospective cohort study was conducted at our institution between 2017 and 2020. A total of 80 consecutive patients treated with a two-stage revision for periprosthetic knee joint infection were included. We retrospectively assessed correlations between patients' preoperative PJI-TNM classification and their therapy and outcome and identified several statistically significant correlations for both classifications, the original and our modified version. We have demonstrated that both classifications provide reliable predictions already at the time of diagnosis regarding the invasiveness of surgery (duration of surgery, blood and bone loss during surgery), likelihood of reimplantation, and patient mortality during the first 12 months after diagnosis. Orthopedic surgeons can use the classification system preoperatively as an objective and comprehensive tool for therapeutic decisions and patient information (informed consent). In the future, comparisons between different treatment options for truly similar preoperative baseline situations can be obtained for the first time. Clinicians and researchers should be familiar with the new PJI-TNM classification and start implementing it into their routine practice. Our adjusted and simplified version ("PJI-pTNM") might be a more convenient alternative for the clinical setting.

Sacral Slope Change From Standing to Relaxed-Seated Grossly Overpredicts the Presence of a Stiff Spine.

BACKGROUND: Several authors propose that a change in sacral slope of ≤10° between the standing and relaxed-seated positions (ΔSSstanding→relaxed-seated) identifies a patient with a stiff lumbar spine and has suggested the use of dual-mobility bearings for such patients undergoing a total hip arthroplasty (THA). The aim of this study was to assess how accurately ΔSSstanding→relaxed-seated can identify patients with a stiff spine. METHODS: A prospective, multicentre, consecutive cohort series of 312 patients had standing, relaxed-seated, and flexed-seated lateral radiographs prior to THA. ΔSSstanding→relaxed-seated was determined by the change in sacral slope between the standing and relaxed-seated positions. Lumbar flexion (LF) was defined as the difference in lumbar lordotic angle between standing and flexed-seated. LF ≤20° was considered a stiff spine. The predictive value of ΔSSstanding→relaxed-seated for characterizing a stiff spine was assessed. RESULTS: A weak correlation between ΔSSstanding→relaxed-seated and LF was identified (r2 = 0.13). Eighty six patients (28%) had ΔSSstanding→relaxed-seated ≤10° and 19 patients (6%) had a stiff spine. Of the 86 patients with ΔSSstanding→relaxed-seated ≤10°, 13 had a stiff spine. The positive predictive value of ΔSSstanding→relaxed-seated ≤10° for identifying a stiff spine was 15%. CONCLUSION: In this cohort, ΔSSstanding→relaxed-seated ≤10° was not correlated with a stiff spine. Using this simplified approach could lead to a 7-fold overprediction of patients with a stiff lumbar spine and abnormal spinopelvic mobility, unnecessary use of dual-mobility bearings, and incorrect component alignment targets. Referring to patients with ΔSSstanding→relaxed-seated ≤10° as being stiff is misleading. The flexed-seated position should be used to effectively assess a patient's spine mobility prior to THA.

Minimally invasive Oxford medial unicompartmental knee replacement in patients 50 years of age or younger.

INTRODUCTION: The aim of the present study was to assess clinical outcome and mid-term survivorship of mobile-bearing unicompartmental knee arthroplasty in patients 50 years of age or younger. METHODS: This study reports the results of 119 patients (130 knees) following mobile-bearing medial UKA. Primary indication was advanced osteoarthritis or avascular necrosis of the femoral condyle. The anterior cruciate ligament (ACL) as well as the collateral ligaments were functionally intact, the varus deformity was manually correctable and there was no evidence of osteoarthritis in the lateral compartment. Survivorship analysis was performed with different endpoints and clinical outcome was measured using the Oxford Knee Score (OKS), American Knee Society Score and Functional Score (AKSS-O, AKSS-F), range of motion (ROM), Tegner activity score, University of California Los Angeles score (UCLA) and visual analogue scale for pain (VAS). RESULTS: The survival rate was 96.6% at 6.5 years (95% CI 98.7-91.3%; number at risk: 56) and 91.7% (95% CI 96.7-80%; number at risk: 22) at 10 years for the endpoint device related revisions and 91.5% at 6.5 years (95% CI 95.4-84.5%; number at risk: 56) and 86.8% (95% CI 93-76.2%; number at risk: 22) at 10 years for the endpoint revision for any reason. Outcome scores, VAS and ROM showed significant improvements (p < 0.001). The mean OKS increased from 26.7 (standard deviation (sd): 7.2) preoperatively to 40.9 (sd: 7.6) at final follow-up, the mean AKSS-O from 48.3 (sd: 13.3) to 87.8 (sd: 14.4) and the mean ROM from 118° (sd: 16.7) to 125° (sd: 11.4). The radiological analysis revealed progression of degenerative changes in the lateral compartment in 39.6% of patients without affecting the functional outcome. CONCLUSIONS: Medial mobile-bearing UKA is a viable surgical treatment option in young patients with significant improvements in knee function and pain. Further follow-up is necessary to evaluate the long-term efficacy. LEVEL OF EVIDENCE: Retrospective cohort study, Level III.

Cup orientation following posterior approach THA - the effect of different visual aids and pelvic supports.

INTRODUCTION: This study aims to compare cup inclination achieved (1) Using two orientation guides, whilst using the same 3-point pelvic positioner and (2) Using two types of pelvic positioners, whilst measuring intra-operative cup inclination with an inclinometer. MATERIALS AND METHODS: This is a prospective, diagnostic cohort study of a consecutive series of 150 THAs performed through a posterior approach. Two types of 3-point pelvic positioners were used (Stulberg and modified Capello Hip Positioners) and the cup was positioned freehand using one of two orientation guides (mechanical guide or digital inclinometer). Intra-operative inclination was recorded, radiographic cup inclination and anteversion were measured from radiographs. The differences in inclination due to pelvic position (ΔPelvicPosition) and orientation definitions (ΔDefinition) were calculated. Target radiographic inclination and anteversion was 40/20° ± 10°. RESULTS: There was no difference in radiographic cup inclination/ (p = 0.63) using a mechanical guide or digital inclinometer. However, differences were seen in ΔPelvicPosition between the positioners ((Stulberg: 0° ± 5 vs. Capello: 3° ± 6); p = 0.011). Intra-operative inclination at implantation was different between positioners and this led to equivalent cases within inclination/anteversion targets (Stulberg:84%, Capello:80%; p = 0.48). CONCLUSIONS: With the pelvis securely positioned with 3-point supports, optimum cup orientation can be achieved with both alignment guides and inclinometer. Non-optimal cup inclinations were seen when intra-operative inclinations were above 40° and below 32°, or the ΔPelvicPosition was excessive (> 15°; n = 2). We would thus recommend that the intra-operative cup inclination should be centered strictly between 30° and 35° relative to the floor. Small differences exist between different type of pelvic positioners that surgeons need to be aware off and account for.

Spinopelvic Characteristics Normalize 1 Year After Total Hip Arthroplasty: A Prospective, Longitudinal, Case-Controlled Study.

BACKGROUND: The presence of hip osteoarthritis is associated with abnormal spinopelvic characteristics. This study aimed to determine whether the preoperative, pathological spinopelvic characteristics normalize at 1 year after total hip arthroplasty (THA). METHODS: This was a prospective, longitudinal, case-control, matched cohort study. Forty-seven patients undergoing THA underwent preoperative and 1-year postoperative assessments. This group was matched with regard to age, sex, and body mass index with 47 controls (volunteers) with well-functioning hips. All participants underwent clinical and radiographic assessments including lateral radiographs in standing, relaxed-seated, and deep-flexed-seated positions. Spinopelvic characteristics included change in lumbar lordosis (ΔLL), change in pelvic tilt (ΔPT), and hip flexion (change in pelvic-femoral angle, ΔPFA) when moving from a standing position to either of the seated positions. Spinopelvic hypermobility was defined as ΔPT > 30° between the standing and upright-seated positions. RESULTS: Patients who underwent THA, compared with the control group, preoperatively demonstrated less mean change in hip flexion (ΔPFA, -54.8° ± 17.1° compared with -68.5° ± 9.5°; p < 0.001), greater mean change in pelvic tilt (ΔPT, 22.0° ± 13.5° compared with 12.7° ± 8.1°; p < 0.001), and greater mean lumbar movement (ΔLL, -22.7° ± 15.5° compared with -15.4° ± 10.9°; p = 0.015) transitioning from a standing position to an upright-seated position. After THA, these differences were no longer present between the THA group and the control group: the mean postoperative changes were -65.8° ± 12.5° (p = 0.256) for ΔPFA, 14.3° ± 9.5° (p = 0.429) for ΔPT, and -15.3° ± 10.6° (p = 0.966) for ΔLL. The higher prevalence of spinopelvic hypermobility in the THA group compared with the control group that was observed preoperatively (21% compared with 0%; p = 0.009) was no longer present after THA (6% compared with 0%; p = 0.194). Similar results were found moving from a standing position to a deep-seated position after THA. CONCLUSIONS: Preoperative spinopelvic characteristics that contribute to abnormal mechanics can normalize after THA following improvement in hip flexion. This leads to patients having the expected hip, pelvic, and spinal flexion as demographically matched controls, thus potentially eliminating abnormal mechanics that contribute to the development or exacerbation of hip-spine syndrome. LEVEL OF EVIDENCE: Therapeutic Level II. See Instructions for Authors for a complete description of levels of evidence.

The accuracy in determining pelvic tilt from anteroposterior pelvic radiographs in patients awaiting hip arthroplasty.

Spinopelvic mobility affects outcome after THA. Whether the sacro-femoral-pubic (SFP) angle, measured on AP radiographs, can be reliably used to estimate pelvic tilt (PT) in hip osteoarthritis patients is unknown. This study aimed to (1) validate the use of the SFP angle in the calculation of PT from AP radiographs, and (2) identify individual patient factors affecting the estimation of PT. A cohort of 100 patients awaiting THA for end-stage hip osteoarthritis was prospectively studied. AP and lateral radiographs, taken in the standing and relaxed-seated positions were evaluated for spinopelvic measurements (SFP, PT, and pelvic incidence [PI]). To validate the SFP angle, estimated PT values using the formula [PT = 75°-SFP] were compared to the true, measured values from the lateral radiographs. Despite good agreement for the estimated and true PT (16.2 ± 5.9° vs. 15.5 ± 8.6°; p = .315), a significantly poorer agreement could be found between the two methods at high or low values of PT. Patient-specific PI correlated with the difference between the two measurement methods (Pearson's r = -0.644; p < .001). However, the change in SFP angle equaled approximately the change in pelvic tilt (∆PT = 2°-∆SFP; Pearson's r = -0.934; p < .001). Absolute values for the sagittal PT should not be estimated from AP pelvic radiographs in patients awaiting total hip arthroplasty. However, the relative change in PT between different positions equals approximately the change in SFP angle. This may allow functional cup orientation after THA to be determined between different postures from an AP radiograph of the pelvis. The SFP angle has moderate accuracy in determining a patient's pelvic tilt; however, it can accurately determine a patient's change in pelvic tilt in different positions.

Integrating the Combined Sagittal Index Reduces the Risk of Dislocation Following Total Hip Replacement.

BACKGROUND: The aims of this matched cohort study were to (1) assess differences in spinopelvic characteristics between patients who sustained a dislocation after total hip arthroplasty (THA) and a control group without a dislocation, (2) identify spinopelvic characteristics associated with the risk of dislocation, and (3) propose an algorithm including individual spinopelvic characteristics to define an optimized cup orientation target to minimize dislocation risk. METHODS: Fifty patients with a history of THA dislocation (29 posterior and 21 anterior dislocations) were matched for age, sex, body mass index (BMI), index diagnosis, surgical approach, and femoral head size with 200 controls. All patients underwent detailed quasi-static radiographic evaluations of the coronal (offset, center of rotation, and cup inclination/anteversion) and sagittal (pelvic tilt [PT], sacral slope [SS], pelvic incidence [PI], lumbar lordosis [LL], pelvic-femoral angle [PFA], and cup anteinclination [AI]) reconstructions. The spinopelvic balance (PI - LL), combined sagittal index (CSI = PFA + cup AI), and Hip-User Index were determined. Parameters were compared between the control and dislocation groups (2-group analysis) and between the controls and 2 dislocation groups identified according to the direction of the dislocation (3-group analysis). Important thresholds were determined from receiver operating characteristic (ROC) curve analyses and the mean values of the control group; thresholds were expanded incrementally in conjunction with running-hypothesis tests. RESULTS: There were no coronal differences, other than cup anteversion, between groups. However, most sagittal parameters (LL, PT, CSI, PI - LL, and Hip-User Index) differed significantly. The 3 strongest predictors of instability were PI - LL >10° (sensitivity of 70% and specificity of 65% for instability regardless of direction), CSIstanding of <216° (posterior instability), and CSIstanding of >244° (anterior instability). A CSI that was not between 205° and 245° on the standing radiograph (CSIstanding) was associated with a significantly increased dislocation risk (odds ratio [OR]: 4.2; 95% confidence interval [CI]: 2.2 to 8.2; p < 0.001). In patients with an unbalanced and/or rigid lumbar spine, a CSIstanding that was not 215° to 235° was associated with a significantly increased dislocation risk (OR: 5.1; 95% CI: 1.8 to 14.9; p = 0.001). CONCLUSIONS: Spinopelvic imbalance (PI - LL >10°) determined from a preoperative standing lateral spinopelvic radiograph can be a useful screening tool, alerting surgeons that a patient is at increased dislocation risk. Measurement of the PFA preoperatively provides valuable information to determine the optimum cup orientation to aim for a CSIstanding of 205° to 245°, which is associated with a reduced dislocation risk. For patients at increased dislocation risk due to spinopelvic imbalance (PI - LL >10°), the range for the optimum CSI is narrower. LEVEL OF EVIDENCE: Prognostic Level III. See Instructions for Authors for a complete description of levels of evidence.

Does Additive Pressurized Carbon Dioxide Lavage Improve Cement Penetration and Bond Strength in Cemented Arthroplasty?

The modern cementing technique in cemented arthroplasty is a highly standardized and, therefore, safe procedure. Nevertheless, aseptic loosening is still the main reason for revision after cemented total knee or cemented total hip arthroplasty. To investigate whether an additional carbon dioxide lavage after a high-pressure pulsatile saline lavage has a positive effect on the bone-cement interface or cement penetration, we set up a standardized laboratory experiment with 28 human femoral heads. After a standardized cleaning procedure, the test implants were cemented onto the cancellous bone. Subsequently, the maximum failure load of the bone-cement interface was determined using a material testing machine to pull off the implant, and the cement penetration was determined using computed tomography. Neither the maximum failure load nor cement penetration into the cancellous bone revealed significant differences between the groups. In conclusion, according to our experiments, the additive use of the carbon dioxide lavage after the high-pressure pulsatile lavage has no additional benefit for the cleaning of the cancellous bone and, therefore, cannot be recommended without restrictions.

Differences in Spinopelvic Characteristics Between Hip Osteoarthritis Patients and Controls.

BACKGROUND: This study of patients with hip primary osteoarthritis and a matched, asymptomatic, volunteers (controls) group aimed to determine spinopelvic differences between the two groups and their consequences for total hip arthroplasty. METHODS: 104 patients (52 in each group) had their sagittal spinopelvic parameters (lumbar lordosis angle, sacral slope, pelvic tilt, pelvic incidence, and the pelvic-femoral angle) measured in the standing, relaxed-seated, and deep-flexed seated positions. Spinopelvic movement was calculated as the change between the different positions, and individual spinopelvic mobility was classified in accordance with the change in pelvic tilt as previously described (ΔPT: stiff (<10°), normal (10-30°), and hypermobile (>30°)). RESULTS: Transitioning from the standing to relaxed-seated position, patients demonstrated 13˚ less hip flexion (P < .001), 12˚ more posterior pelvic tilt (P = .006), and 6˚ more lumbar flexion (P = .038) compared with controls. Transitioning from the standing to deep-flexed seated position, patients demonstrated 18˚ less hip flexion (P < .001), accompanied by a posterior and not an anterior pelvic tilt as in the controls (7˚ ± 14 vs -6˚ ± 17; P < .001). Patients showed a higher percentage of spinopelvic hypermobility (19% vs 2%; P = .008). CONCLUSION: The reduced ability of flexion in the arthritic hip, leads to posterior pelvic tilt in the relaxed-seated position. This is associated with a likely compensatory increased lumbar flexion to keep an upright position. Therefore, spinopelvic hypermobility has to be defined as pathologic. When moving to the deep-flexed seated position, decreased flexion of the arthritic hip prevents the pelvis from tilting anteriorly while the lumbar spine performs a compensatory flexion by approximately the same amount compared with controls. LEVEL OF EVIDENCE: Level II, diagnostic study.

[What are the benefits of patient-specific reconstruction in total hip replacement?] / Welchen Nutzen hat die Rekonstruktion der patientenindividuellen Anatomie beim endoprothetischen Hüftgelenkersatz?

BACKGROUND: The success of primary total hip replacement (THR) is predominately determined by the primary stability of the implant and the restoration of the patient-specific joint biomechanics. The three-dimensional (patho-) anatomy, size, geometry, and shape of the acetabulum and proximal femur is highly variable in patients with advanced hip osteoarthritis. Accurate preoperative planning is an essential prerequisite for all replacement procedures. CURRENT SITUATION: Current data demonstrates clinical advantages for patient-specific reconstruction of functional joint geometry via surrogate parameters (offset and leg length). Frequently cited "target zones" for the positioning and orientation of the cup are increasingly in the focus of scientific discussion, as individually adjusted target zones for implant positioning allow for a potential reduction of impingement risk. Patients with spinal fusions or pathologic spinopelvic alignment require that particular attention be paid to patient-specific preoperative preparation, the surgical technique, and implant selection in order to reduce the risk of postoperative instability.

How Does Spinopelvic Mobility and Sagittal Functional Cup Orientation Affect Patient-Reported Outcome 1 Year after THA?-A Prospective Diagnostic Cohort Study.

BACKGROUND: This prospective cohort study aimed to characterize how spinopelvic characteristics change post-total hip arthroplasty (THA) and determine how patient-reported outcome measures are associated with 1) individual spinopelvic mobility and 2) functional sagittal cup orientation post-THA. METHODS: One hundred consecutive patients who received unilateral THAs for end-stage hip osteoarthritis, without spinal pathology were studied. Preoperatively and postoperatively, patients underwent clinical and radiographic evaluations. Patient-reported outcomes were collected using the hip disability and osteoarthritis outcome score - physical function shortform (HOOS-PS). Radiographic parameters measured from standing and relaxed-seated radiographs, included the lumbar lordosis angle, pelvic tilt, pelvic femoral angle and cup orientation in the coronal (inclination/anteversion) and sagittal (anteinclination) planes. Spinopelvic mobility was characterized (ΔPT: "stiff" [<10°], "normal" [10°-30°], and "hypermobile" [>30°]). RESULTS: Preoperative spinopelvic characteristics were not associated with HOOS-PS. Post-THA, the spinopelvic characteristics changed, with less patients having spinopelvic hypermobility (7%) compared with preop (14%). Postoperatively, patients with spinopelvic hypermobility showed significantly worse HOOS-PS scores (21 ± 17 vs 21 ± 22 vs 41 ± 23; ANOVA P = .037). Sagittal but not coronal cup orientation was associated with postoperative spinopelvic characteristics. Cup anteinclination was less in the patients with postoperative spinopelvic hypermobility (27 ± 7° vs 36 ± 8° vs 36 ± 10°; ANOVA: P = .035). CONCLUSION: We hypothesize that spinopelvic hypermobility is secondary to impingement and reduced hip flexion; to achieve a seated position, impinging hips require more posterior pelvic tilt. Patients with spinopelvic hypermobility are likely impinging secondary to the low cup anteinclination (sagittal malorientation despite optimum coronal orientation) and thus have lower HOOS-PS compared. Sagittal assessments are thus important to adequately study hip mechanics. LEVEL OF EVIDENCE: Level II, diagnostic study.

[Battle: Indication for surgery in hip-spine syndrome-Hip or spine first? : The spine surgeon's view]. / Battle: Operationsindikation beim Hip-Spine-Syndrom ­ Die Hüfte oder die Wirbelsäule zuerst? : Die Sicht des Wirbelsäulenchirurgen.

Pathologies of the hip, spine and the lower extremity are often concomitant due to their three-dimensional anatomic and physiological interrelation. The real challenge lies in defining which of the pathologies is most relevant for the patient in terms of clinical symptoms and which organ should be treated first. The purpose of this review article is two-fold: Firstly, to explain the treatment dilemma of hip-spine syndrome to the treating physician. Secondly, to highlight the significance of spinal pathology in this context.

Pathologic spinopelvic balance in patients with hip osteoarthritis : Preoperative screening and therapeutic implications.

Recently spinopelvic balance and mobility, i.e. the dynamic interaction of the spine, pelvis and the femur in the sagittal plane between different postures, has been identified as a relevant factor influencing the outcome of primary total hip arthroplasty (THA). Individual spinopelvic balance and mobility seem to affect patient reported outcome and the risk of impingement and dislocation following THA. The aim of this article is to provide a concise overview of normal and pathologic spinopelvic alignment, to characterize relevant spinopelvic parameters and the diagnostic assessment in patients with hip OA and to discuss potential implications for THA with respect to implant selection and component orientation.Spinopelvic characteristics are highly variable. Patients with stiff lumbar spines and mobile hips seem to be at an increased risk of impingement and dislocation and can be screened with single lateral standing radiographs of the spinopelvic complex before THA. In patients with hip and spine pathology, particular attention should be paid to evaluate the individual pathoanatomy of the hip and established clinical measurements should be diligently taken with respect to the reconstruction of the center of rotation, hip offset, leg length and soft tissue tension in order to minimize the risk of impingement and dislocation. No evidence-based recommendations for novel target zones concerning implant position can currently be made. In patients at risk 36 mm heads should be used whenever possible. In high risk patients, such as the combination of a stiff unbalanced lumbar spine ("flatback") and a mobile hip or in the presence of long spinal fusions or fusions involving the sacrum, dual mobility cups offer additional stability.