A Weighted Head Accelerator Mechanism (WHAM) for visualizing brain rheology using magnetic resonance imaging.

BACKGROUND: A device for moving the head during MR imaging, called a Weighted Head Accelerator Mechanism (WHAM), rotates the head of a supine subject within programmable rotation limits and acceleration profiles. The WHAM can be used with custom MRI sequences to visualize the deformation and recoil of in vivo brain parenchyma with high temporal resolution, allowing element-wise calculation of strain and shear forces in the brain. Unlike previous devices, the WHAM can be configured to provide a wide range of motion and acceleration profiles. NEW METHOD: The WHAM was calibrated using a high-speed camera on a laboratory bench and in 1.5 Tesla and 3.0 Tesla MRI scanners using gel phantoms and human subjects. The MR imaging studies employed a spatial spin-saturation tagging sub-sequence, followed by serial image acquisition. In these studies, 256 images were acquired with a temporal resolution of 2.56 ms. Deformation of the brain was quantified by following the spatial tags in the images. RESULTS: MR imaging showed that the WHAM drove quantifiable brain motions using g forces less than those typically observed in day-to-day activities, with peak accelerations of ∼250 rad/sec2. COMPARISON WITH EXISTING METHODS: The peak pre-contact accelerations and velocities achieved by the WHAM device in this study are both higher than devices used in previous studies, while also allowing for modification of these factors. CONCLUSIONS: MR imaging performed with the WHAM provides a direct method to visualize and quantify "brain slosh" in response to rotational acceleration. Consequently, this approach might find utility in evaluating strategies to protect the brain from mild traumatic brain injury (mTBI).

A novel acoustically quiet coil for neonatal MRI system.

MRI acoustic exposure has the potential to elicit physiological distress and impact development in preterm and term infants. To mitigate this risk, a novel acoustically quiet coil was developed to reduce the sound pressure level experienced by neonates during MR procedures. The new coil has a conventional high-pass birdcage RF design, but is built on a framework of sound abating material. We evaluated the acoustic and MR imaging performance of the quiet coil and a conventional body coil on two small footprint NICU MRI systems. Sound pressure level and frequency response measurements were made for six standard clinical MR imaging protocols. The average sound pressure level, reported for all six imaging pulse sequences, was 82.2 dBA for the acoustically quiet coil, and 91.1 dBA for the conventional body coil. The sound pressure level values measured for the acoustically quiet coil were consistently lower, 9 dBA (range 6-10 dBA) quieter on average. The acoustic frequency response of the two coils showed a similar harmonic profile for all imaging sequences. However, the amplitude was lower for the quiet coil, by as much as 20 dBA.