Composites of Titanium-Molybdenum Mixed Oxides and Non-Traditional Carbon Materials: Innovative Supports for Platinum Electrocatalysts for Polymer Electrolyte Membrane Fuel Cells.

TiO2-based mixed oxide-carbon composite support for Pt electrocatalysts provides higher stability and CO tolerance under the working conditions of polymer electrolyte membrane fuel cells compared to traditional carbon supports. Non-traditional carbon materials like graphene nanoplatelets and graphite oxide used as the carbonaceous component of the composite can contribute to its affordability and/or functionality. Ti(1-x)MoxO2-C composites involving these carbon materials were prepared through a sol-gel route; the effect of the extension of the procedure through a solvothermal treatment step was assessed. Both supports and supported Pt catalysts were characterized by physicochemical methods. Electrochemical behavior of the catalysts in terms of stability, activity, and CO tolerance was studied. Solvothermal treatment decreased the fracture of graphite oxide plates and enhanced the formation of a reduced graphene oxide-like structure, resulting in an electrically more conductive and more stable catalyst. In parallel, solvothermal treatment enhanced the growth of mixed oxide crystallites, decreasing the chance of formation of Pt-oxide-carbon triple junctions, resulting in somewhat less CO tolerance. The electrocatalyst containing graphene nanoplatelets, along with good stability, has the highest activity in oxygen reduction reaction compared to the other composite-supported catalysts.

Development of bilateral asymmetry of the upper limb in children from a medieval population in Central Europe, Hungary.

This study examined the emergence and characteristics of bilateral asymmetry of the upper limb during development in a medieval agricultural population from Hungary, and investigated the agricultural activity-types in a bioarchaeological and biomechanical context. The skeletal remains of 169 nonadult individuals were selected from the cemetery of Bátmonostor-Pusztafalu, providing 134 cases for humeral diameter and length, 70 cases for radial length and 62 cases for ulnar length measurements. Biological age was estimated by using tooth eruption. Age groups were defined on the basis of the development of motor skills in children. Statistical analyses included correlation, Chi-square test, Fisher analysis and ANOVA. Our investigation revealed that the frequency of asymmetry increased significantly during growth with a shift to the right side in all measurements and reached adult-like distribution in early childhood. The bilateral asymmetry increased with age in humeral length, while other measurements revealed no change. The magnitude of asymmetry decreased with age in humeral diameter, but remained constant in other measurements. Our observations strengthen the hypothesis that right-sided asymmetry develops gradually during growth. Our findings also illustrate the effects of medieval agricultural labour on upper limb asymmetry: mechanical loading has various effects during development both on the magnitude and on direction of asymmetry.

Carbon Microsphere-Supported Metallic Nickel Nanoparticles as Novel Heterogeneous Catalysts and Their Application for the Reduction of Nitrophenol.

Nickel nanoparticles are gaining increasing attention in catalysis due to their versatile catalytic action. A novel, low-cost and facile method was developed in this work to synthesize carbon microsphere-supported metallic nickel nanoparticles (Ni-NP/C) for heterogeneous catalysis. The synthesis was based on carbonizing a polystyrene-based cation exchange resin loaded with nickel ions at temperatures between 500 and 1000 °C. The decomposition of the nickel-organic framework resulted in both Ni-NP and carbon microsphere formation. The phase composition, morphology and surface area of these Ni-NP/C microspheres were characterized by powder X-ray diffraction, Raman spectroscopy, scanning electron microscopy and BET analysis. Elemental nickel was found to be the only metal containing phase; fcc-Ni coexisted with hcp-Ni at carbonization temperatures between 500 and 700 °C, and fcc-Ni was the only metallic phase at 800-1000 °C. Graphitization and carbon nanotube formation were observed at high temperatures. The catalytic activity of Ni-NP/C was tested in the reduction of 4-nitrophenol to 4-aminophenol by sodium borohydride, and Ni-NP/C was proved to be an efficient catalyst in this reaction. The relatively easy and scalable synthetic method, as well as the easy separation and catalytic activity of Ni-NP/C, provide a viable alternative to existing nickel nanocatalysts in future applications.

Solid-Phase "Self-Hydrolysis" of [Zn(NH3)4MoO4@2H2O] Involving Enclathrated Water-An Easy Route to a Layered Basic Ammonium Zinc Molybdate Coordination Polymer.

An aerial humidity-induced solid-phase hydrolytic transformation of the [Zn(NH3)4]MoO4@2H2O (compound 1@2H2O) with the formation of [(NH4)xH(1-x)Zn(OH)(MoO4)]n (x = 0.92-0.94) coordination polymer (formally NH4Zn(OH)MoO4, compound 2) is described. Based on the isostructural relationship, the powder XRD indicates that the crystal lattice of compound 1@2H2O contains a hydrogen-bonded network of tetraamminezinc (2+) and molybdate (2-) ions, and there are cavities (O4N4(µ-H12) cube) occupied by the two water molecules, which stabilize the crystal structure. Several observations indicate that the water molecules have no fixed positions in the lattice voids; instead, the cavity provides a neighborhood similar to those in clathrates. The @ symbol in the notation is intended to emphasize that the H2O in this compound is enclathrated rather than being water of crystallization. Yet, signs of temperature-dependent dynamic interactions with the wall of the cages can be detected, and 1@2H2O easily releases its water content even on standing and yields compound 2. Surprisingly, hydrolysis products of 1 were observed even in the absence of aerial humidity, which suggests a unique solid-phase quasi-intramolecular hydrolysis. A mechanism involving successive substitution of the ammonia ligands by water molecules and ammonia release is proposed. An ESR study of the Cu-doped compound 2 (2#dotCu) showed that this complex consists of two different Cu2+(Zn2+) environments in the polymeric structure. Thermal decomposition of compounds 1 and 2 results in ZnMoO4 with similar specific surface area and morphology. The ZnMoO4 samples prepared from compounds 1 and 2 and compound 2 in itself are active photocatalysts in the degradation of Congo Red dye. IR, Raman, and UV studies on compounds 1@2H2O and 2 are discussed in detail.

Solid-Phase Quasi-Intramolecular Redox Reaction of [Ag(NH3)2]MnO4: An Easy Way to Prepare Pure AgMnO2.

Two monoclinic polymorphs of [Ag(NH3)2]MnO4 containing a unique coordination mode of permanganate ions were prepared, and the high-temperature polymorph was used as a precursor to synthesize pure AgMnO2. The hydrogen bonds between the permanganate ions and the hydrogen atoms of ammonia were detected by IR spectroscopy and single-crystal X-ray diffraction. Under thermal decomposition, these hydrogen bonds induced a solid-phase quasi-intramolecular redox reaction between the [Ag(NH3)2]+ cation and MnO4- anion even before losing the ammonia ligand or permanganate oxygen atom. The polymorphs decomposed into finely dispersed elementary silver, amorphous MnOx compounds, and H2O, N2 and NO gases. Annealing the primary decomposition product at 573 K, the metallic silver reacted with the manganese oxides and resulted in the formation of amorphous silver manganese oxides, which started to crystallize only at 773 K and completely transformed into AgMnO2 at 873 K.

Temperature-Limited Synthesis of Copper Manganites along the Borderline of the Amorphous/Crystalline State and Their Catalytic Activity in CO Oxidation.

Copper manganese oxides (CMO) with CuMn2O4 composition are well-known catalysts, which are widely used for the oxidative removal of dangerous chemicals, e.g., enhancing the CO to CO2 conversion. Their catalytic activity is the highest, close to those of the pre-crystalline and amorphous states. Here we show an easy way to prepare a stable CMO material at the borderline of the amorphous and crystalline state (BAC-CMO) at low temperatures (<100 °C) followed annealing at 300 °C and point out its excellent catalytic activity in CO oxidation reactions. We demonstrate that the temperature-controlled decomposition of [Cu(NH3)4](MnO4)2 in CHCl3 and CCl4 at 61 and 77 °C, respectively, gives rise to the formation of amorphous CMO and NH4NO3, which greatly influences the composition as well as the Cu valence state of the annealed CMOs. Washing with water and annealing at 300 °C result in a BAC-CMO material, whereas the direct annealing of the as-prepared product at 300 °C gives rise to crystalline CuMn2O4 (sCMO, 15-40 nm) and ((Cu,Mn)2O3, bCMO, 35-40 nm) mixture. The annealing temperature influences both the quantity and crystallite size of sCMO and bCMO products. In 0.5% CO/0.5% O2/He mixture the best CO to CO2 conversion rates were achieved at 200 °C with the BAC-CMO sample (0.011 mol CO2/(m2 h)) prepared in CCl4. The activity of this BAC-CMO at 125 °C decreases to half of its original value within 3 h and this activity is almost unchanged during another 20 h. The BAC-CMO catalyst can be regenerated without any loss in its catalytic activity, which provides the possibility for its long-term industrial application.

(Me2NH2)10[H2-Dodecatungstate] polymorphs: dodecatungstate cages embedded in a variable dimethylammonium cation + water of crystallization matrix.

Two polymorphs and a solvatomorph of a new dimethylammonium polytungstate-decakis(dimethylammonium) dihydrogendodecatungstate, (Me2NH2)10(W12O42)·nH2O (n = 10 or 11)-have been synthesized. Their structures were characterized by single-crystal X-ray diffraction and solid-phase NMR methods. The shape of the dodecatungstate anions is essentially the same in all three structures, their interaction with the cations and water of crystallization, however, is remarkably variable, because the latter forms different hydrogen-bonded networks, and provides a highly versatile matrix. Accordingly, the N-H⋯O and C-H⋯O hydrogen bonds are positioned in each crystal lattice in a variety of environments, characteristic to the structure, which can be distinguished by solid-state 1H-CRAMPS, 13C, 15N CP MAS and 1H-13C heteronuclear correlation NMR. Thermogravimetry of the solvatomorphs also reflect the difference and multiformity of the environment of the water molecules in the different crystal lattices. The major factors behind the variability of the matrix are the ability of ammonium cations to form two hydrogen bonds and the rigidity of the polyoxometalate anion cage. The positions of the oxygen atoms in the latter are favourable for the formation of bifurcated and trifurcated cation-anion hydrogen bonds, some which are so durable that they persist after the crystals are dissolved in water, forming ion associates even in dilute solutions. The H atom involved in furcated hydrogen bonds cannot be exchanged by deuterium when the compound is dissolved in D2O. An obvious consequence of the versatility of the matrix is the propensity of these compounds to form multiple polymorphs.

Post-functionalization of dibenzothiophene to functionalized biphenyls via a photoinduced thia-Baeyer-Villiger oxidation.

The Baeyer-Villiger reaction is used extensively in organic chemistry. Sila- and bora-variants have also been documented widely, with these processes underpinning, for example, the Fleming-Tamao oxidation and hydroborative alkene hydration, respectively. By contrast, the development of thia-Baeyer-Villiger reactions involving sulfoxides has long been considered unlikely because competitive oxidation to the sulfone occurs exclusively. Here, we disclose a photoinduced thia-Baeyer-Villiger-type oxidations; specifically, we find that exposure of dibenzothiophene (DBT) derivatives to an iron porphyrin catalyst under Ultraviolet irradiation in the presence of t-BuOOH generates sulfinic esters in up to 87% yield. The produced sulfinic esters are transformed to a variety of biphenyl substrates including biphenyl sulfoxides, sulfones and sulfonamides in 1-2 steps. These results provide a mild process for the selective functionalization of sulfur compounds, and offer a biomimetic approach to convert DBT into 2-hydroxybiphenyl under controllable stepwise pathway. Based upon experimental evidences and DFT calculation, a mechanism is proposed.

Unique Thia-Baeyer-Villiger-Type Oxidation of Dibenzothiophene Sulfoxides Derivatives.

The present research has demonstrated that selective C-S bond cleavages of dibenzothiophene and its derivatives are feasible by thia-Baeyer-Villiger type oxidation, i. e. the oxygen insertion process within a sulfoxide-carbon linkage, in the presence of porphyrin iron (III) and by ultraviolet irradiation originating from sunlight, high pressure Hg-lamp or residentially germicidal ultraviolet lamp under very mild conditions. This reaction with tert-butylhydroperoxide at 30.0 °C leads to dibenzo[1,2]oxathiin-6-oxide (PBS) in 83.2 % isolated yield or its hydrated products, 2-(2-hydroxyphenyl)-benzenesulfinic derivatives (HPBS) in near 100 % yield based HPLC data. PBS and HPBS are a type of biological products detected on the C-S bond cleavage step through various oxidative biodesulfurization (OBDS) pathways, and are useful synthetic intermediates and fine chemicals. These observations may contribute on understanding delicately molecular aspect of OBDS in the photosynthesis system, expanding the C-S cleavage chemistry of S-heterocyclic compounds and approaching toward biomemic desulfurization with respect to converting sulfur contaminants to chemically beneficial blocks as needed and performing under the ambient conditions.

Development of Flame-Retarded Nanocomposites from Recycled PET Bottles for the Electronics Industry.

Recycled polyethylene-terephthalate (rPET) nanocomposites of reduced flammability were prepared by combining aluminum-alkylphosphinate (AlPi) flame retardant (FR) and natural montmorillonite (MMT), in order to demonstrate that durable, technical products can be produced from recycled materials. During the development of the material, by varying the FR content, the ratio and the type of MMTs, rheological, morphological, mechanical and flammability properties of the nanocomposites were comprehensively investigated. Related to the differences between the dispersion and nucleation effect of MMT and organo-modified MMT (oMMT) in rPET matrix, analyzed by Scanning Electron Microscopy (SEM), Energy Dispersive X-Ray Spectroscopy (EDS) and Differential Scanning Calorimetry (DSC), mechanical properties of the nanocomposites changed differently. The flexural strength and modulus were increased more significantly by adding untreated MMT than by the oMMT, however the impact strength was decreased by both types of nanofillers. The use of different type of MMTs resulted in contradictory flammability test result; time-to-ignition (TTI) during cone calorimeter tests decreased when oMMT was added to the rPET, however MMT addition resulted in an increase of the TTI also when combined with 4% FR. The limiting oxygen index (LOI) of the oMMT containing composites decreased independently from the FR content, however, the MMT increased it noticeably. V0 classification according to the UL-94 standard was achieved with as low as 4% FR and 1% MMT content. The applicability of the upgraded recycled material was proved by a pilot experiment, where large-scale electronic parts were produced by injection molding and characterized with respect to the commercially available counterparts.

Unexpected Sequential NH3/H2O Solid/Gas Phase Ligand Exchange and Quasi-Intramolecular Self-Protonation Yield [NH4Cu(OH)MoO4], a Photocatalyst Misidentified before as (NH4)2Cu(MoO4)2.

[NH4Cu(OH)MoO4] as active photocatalyst in the decomposition of Congo Red when irradiated by UV or visible light has been prepared in an unusual ammonia/water ligand exchange reaction of [tetraamminecopper(II)] molybdate, [Cu(NH3)4]MoO4. [Cu(NH3)4]MoO4 was subjected to moisture of open air at room temperature. Light blue orthorhombic [Cu(NH3)(H2O)3]MoO4 was formed in 2 days as a result of an unexpected solid/gas phase ammonia-water ligand exchange reaction. This complex does not lose its last ammonia ligand on further standing in open air; however, a slow quasi-intramolecular (self)-protonation reaction takes place in 2-4 weeks, producing a yellowish-green microcrystalline material, which has been identified as a new compound, [NH4Cu(OH)MoO4], ( a = 10,5306 Å, b = 6.0871 Å, c = 8.0148 Å, ß = 64,153°, C2, Z = 4). Mechanisms are proposed for both the sequential ligand exchange and the self-protonation reactions supported by ab initio quantum-chemical calculations and deuteration experiments as well. The [Cu(NH3)(H2O)3]MoO4 intermediate transforms into NH4Cu(OH)(H2O)2MoO4, which loses two waters and yields [NH4Cu(OH)MoO4]. Upon heating, both [Cu(NH3)4]MoO4 and [Cu(NH3)(H2O)3]MoO4 decompose, losing three NH3 and three H2O ligands, respectively, and stable [Cu(NH3)MoO4] is formed from both. The latter can partially be hydrated in boiling water into [NH4Cu(OH)MoO4. This compound can also be prepared in pure form by boiling the saturated aqueous solution of [Cu(NH3)4]MoO4. All properties of [NH4Cu(OH)MoO4] match those of the active photocatalyst described earlier in the literature under the formulas (NH4)2[Cu(MoO4)2] and (NH4)2Cu4(NH3)3Mo5O20.

Synthesis of Diketones, Ketoesters, and Tetraketones by Electrochemical Oxidative Decarboxylation of Malonic Acid Derivatives: Application to the Synthesis of cis-Jasmone.

Disubstituted malonic acid derivatives are smoothly converted into diketones and ketoesters in good to excellent yield (68% to 91%) under electrochemical conditions. The scope can be extended to transform trisubstituted bis-malonic acids into tetraketones in 77% to 86% yield. The new method was applied to the total synthesis of cis-jasmone.

Electrochemical methoxymethylation of alcohols - a new, green and safe approach for the preparation of MOM ethers and other acetals.

A new, green, safe, cost-effective and highly efficient electrochemical approach for the methoxymethylation of alcohols and phenols was successfully developed. The methodology was also applied to the synthesis of substituted acetals.

Straightforward and effective synthesis of γ-aminobutyric acid transporter subtype 2-selective acyl-substituted azaspiro[4.5]decanes.

Supply of major metabolites such as γ-aminobutyric acid (GABA), ß-alanine and taurine is an essential instrument that shapes signalling, proper cell functioning and survival in the brain and peripheral organs. This background motivates the synthesis of novel classes of compounds regulating their selective transport through various fluid-organ barriers via the low-affinity γ-aminobutyric acid (GABA) transporter subtype 2 (GAT2). Natural and synthetic spirocyclic compounds or therapeutics with a range of structures and biological activity are increasingly recognised in this regard. Based on pre-validated GABA transport activity, straightforward and efficient synthesis method was developed to provide an azaspiro[4.5]decane scaffold, holding a variety of charge, substituent and 3D constrain of spirocyclic amine. Investigation of the azaspiro[4.5]decane scaffold in cell lines expressing the four GABA transporter subtypes led to the discovery of a subclass of a GAT2-selective compounds with acyl-substituted azaspiro[4.5]decane core.

User-Friendly Platinum Catalysts for the Highly Stereoselective Hydrosilylation of Alkynes and Alkenes.

With a view to addressing the shortcomings of traditional catalysts, a new generation of outstanding N-heterocyclic carbene platinum(0) complexes for the hydrosilylation of unsaturated carbon-carbon bonds is reported. Their discovery and application to the stereoselective addition of various silanes to silylated alkynes, terminal acetylenes, and olefins is presented. Insights into the catalytic cycle and the origin of the stereoselectivity are also discussed.

Electrochemical Oxidative Decarboxylation of Malonic Acid Derivatives: A Method for the Synthesis of Ketals and Ketones.

A novel electrochemical oxidative decarboxylation of disubstituted malonic acids leading to dimethoxy ketals is described. In the presence of NH3, a wide range of disubstituted malonic acids was transformed into the corresponding ketals in good to excellent yields under electrochemical conditions. When the crude reaction mixture, obtained after electrolysis, was directly treated with 1 M aq HCl, the initially generated ketals were smoothly transformed into the corresponding ketones in a single vessel operation.

Core-Shell Processing of Natural Pigment: Upper Palaeolithic Red Ochre from Lovas, Hungary.

Ochre is the common archaeological term for prehistoric pigments. It is applied to a range of uses, from ritual burials to cave art to medications. While a substantial number of Palaeolithic paint mining pits have been identified across Europe, the link between ochre use and provenance, and their antiquity, has never yet been identified. Here we characterise the mineralogical signature of core-shell processed ochre from the Palaeolithic paint mining pits near Lovas in Hungary, using a novel integration of petrographic and mineralogical techniques. We present the first evidence for core-shell processed, natural pigment that was prepared by prehistoric people from hematitic red ochre. This involved combining the darker red outer shell with the less intensely coloured core to efficiently produce an economical, yet still strongly coloured, paint. We demonstrate the antiquity of the site as having operated between 14-13 kcal BP, during the Epigravettian period. This is based on new radiocarbon dating of bone artefacts associated with the quarry site. The dating results indicate the site to be the oldest known evidence for core-shell pigment processing. We show that the ochre mined at Lovas was exported from the site based on its characteristic signature at other archaeological sites in the region. Our discovery not only provides a methodological framework for future characterisation of ochre pigments, but also provides the earliest known evidence for "value-adding" of products for trade.

Specific localization and measurement of hydrogen peroxide in Arabidopsis thaliana cell suspensions and protoplasts elicited by COS-OGA.

H2O2 acts as an important signaling molecule during plant/pathogen interactions but its study remains a challenge due to the current shortcomings in H2O2-responsive probes. In this work, ContPY1, a new molecular probe developed to specifically detect H2O2 was used to study the elicitation of Arabidopsis thaliana cells by a complex of chitosan oligomers (COS) and oligogalacturonides (OGA). The comparison of cell suspensions, protoplasts of cell suspensions and leaf protoplasts treated with different inhibitors gave indications on the potential sources of hydrogen peroxide in plant cells. The relative contribution of the cell wall, of membrane dehydrogenases and of peroxidases depended on cell type and treatment and proved to be variable. Our present protocol can be used to study hydrogen peroxide production in a large variety of plant species by simple protocol adaptation.

Validation of the boronate sensor ContPY1 as a specific probe for fluorescent detection of hydrogen peroxide in plants.

Studying the implication of hydrogen peroxide in biological processes in plants remains a challenge due to the current shortcomings of H2O2-responsive probes. The use of ContPY1, a new fluorescent probe, which is highly selective and sensitive for H2O2, was investigated. To validate the use of ContPY1 on plants, we have generated protocols employing cells suspensions and leaves, and measured specifically H2O2 production by plants using spectrofluorometry and microscopy.

Anionic cascade reactions. One-pot assembly of (Z)-chloro-exo-methylenetetrahydrofurans from ß-hydroxyketones.

The assembly of (Z)-chloro-exo-methylenetetrahydrofurans by an original and connective anionic cascade sequence is reported. Base-catalysed condensation of ß-hydroxyketones with 1,1-dichloroethylene generates, in moderate to good yields, the corresponding (Z)-chloro-exo-methylenetetrahydrofurans. Acidic treatment of this motif leads to several unexpected dimers, possessing unique structural features.