2-methacryloyloxyethyl phosphorylcholine polymer treatment prevents Candida albicans biofilm formation on acrylic resin.

PURPOSE: We aimed to evaluate the effectiveness of photoreactive 2-methacryloyloxyethyl phosphorylcholine (MPC) in inhibiting Candida albicans biofilm formation on polymethyl methacrylate (PMMA) and assess its mechanism and need for re-application by evaluating its interaction with salivary mucin and durability during temperature changes. METHODS: PMMA discs were used as specimens. The MPC coating was applied using the spray and cure technique for the treatment groups, whereas no coating was applied to the control. The MPC treatment (MT) groups were further differentiated based on the number of thermal cycles involved (0, 1000, 2500, and 5000). The optical density was measured to assess mucin adsorption (MA). Contact angle (CA) was calculated to evaluate surface hydrophilicity. The presence of MPC components on the PMMA surface was assessed using X-ray photoelectron spectroscopy (XPS). C. albicans biofilms were evaluated qualitatively (scanning electron microscope images) and quantitatively (colony-forming units (CFUs)). Statistical analysis was conducted using two-way analysis of variance and Tukey's multiple comparison test. RESULTS: MA rate and CA increased significantly in the MT groups, which exhibited significantly fewer CFUs and thinner biofilms than those of the control group. Based on the XPS, MA, and CFU evaluations, the durability and efficacy of the MPC coating were considered stable up to 2500 thermal cycles. Additionally, a significant interaction was observed between mucin concentration and MPC efficacy. CONCLUSIONS: The photoreactive MPC coating, which was resistant to temperature changes for approximately 3 months, effectively prevented C. albicans biofilm formation by modifying surface hydrophilicity and increasing mucin adsorption.

Application of artificial intelligence in the dental field: A literature review.

PURPOSE: The purpose of this study was to comprehensively review the literature regarding the application of artificial intelligence (AI) in the dental field, focusing on the evaluation criteria and architecture types. STUDY SELECTION: Electronic databases (PubMed, Cochrane Library, Scopus) were searched. Full-text articles describing the clinical application of AI for the detection, diagnosis, and treatment of lesions and the AI method/architecture were included. RESULTS: The primary search presented 422 studies from 1996 to 2019, and 58 studies were finally selected. Regarding the year of publication, the oldest study, which was reported in 1996, focused on "oral and maxillofacial surgery." Machine-learning architectures were employed in the selected studies, while approximately half of them (29/58) employed neural networks. Regarding the evaluation criteria, eight studies compared the results obtained by AI with the diagnoses formulated by dentists, while several studies compared two or more architectures in terms of performance. The following parameters were employed for evaluating the AI performance: accuracy, sensitivity, specificity, mean absolute error, root mean squared error, and area under the receiver operating characteristic curve. CONCLUSION: Application of AI in the dental field has progressed; however, the criteria for evaluating the efficacy of AI have not been clarified. It is necessary to obtain better quality data for machine learning to achieve the effective diagnosis of lesions and suitable treatment planning.

Treatment outcomes of implant-assisted removable partial denture with distal extension based on the Kennedy classification and attachment type: a systematic review.

BACKGROUND: Implant-assisted removable partial dentures (IARPDs) have recently become popular, but little information is available on the treatment outcomes based on the Kennedy classification and attachment types. OBJECTIVE: The objective of this review was to evaluate the treatment outcomes of IARPD delivered for distal extension edentulous areas based on the differences in the Kennedy classification and attachment type. MATERIALS AND METHODS: English-language clinical studies on IARPD published between January 1980 and February 2020 were collected from MEDLINE (via PubMed), the Cochrane Library (via the Cochrane Central Register of Controlled Trials), Scopus online database, and manual searching. Two reviewers selected the articles based on pre-determined inclusion and exclusion criteria, followed by data extraction and analysis. RESULTS: Eighty-one studies were selected after evaluating the titles and abstracts of 2410 papers. Nineteen studies were finally included after the perusal of the full text. Fourteen studies focused on Class I, 4 studies investigated both Class I and II, and only 1 study was conducted on Kennedy's class II. Eight types of attachments were reported. The ball attachment was the most frequently used attachment, which was employed in 8 of the included studies. The implant survival rate ranged from 91 to 100%. The reported marginal bone loss ranged from 0.3 mm to 2.30 mm. The patient satisfaction was higher with IARPD than with conventional RPDs or that before treatment. The results of prosthetic complications were heterogeneous and inconclusive. CONCLUSION: IARPD exhibited favorable clinical outcomes when used as a replacement for distal extension edentulous areas. The comparison between the clinical outcomes of Kennedy's class I and II was inconclusive owing to the lack of studies focusing on Kennedy Class II alone. The stud attachment was the most commonly used type in IARPDs. Overall, the different attachment systems did not influence the implant survival rate and patient satisfaction. Further high-quality studies are needed to investigate the attachment systems used in IARPD.

Reliability of Screening Methods to Diagnose Oral Dryness and Evaluate Saliva Secretion.

In this study, we evaluated the reliability and reproducibility of widely implemented salivary flow rate and oral dryness tests. In experiment 1, twenty young and healthy Japanese participants volunteered to participate. For each participant, the oral moisture (OM) level, unstimulated whole saliva volume (U-WSV), and stimulated whole saliva volume (S-WSV) were measured at the same time on two separate days. In experiment 2, twenty-seven patients who were over 65 years of age volunteered to participate. The OM level and U-WSV were measured at the same time on two separate days. In Experiment 1, the intra-class correlation coefficients (ICCs) corresponding to the S-WSV, U-WSV, and OM level were 0.23, 0.28, and 0.16, respectively, for the young participants. In Experiment 2, the ICCs corresponding to the U-WSV/spitting and OM level were 0.83 and 0.12, respectively, for the older participants. The results of Bland-Altman analysis confirmed the absence of systematic error, with the exception of the OM level results in Experiment 2, which indicated systematic bias. In conclusion, we believe that there is currently no consistent and reliable screening test for assessing salivary flow rate and oral dryness, although the spitting test was determined to be highly reliable.

Effect of water temperature during ultrasonic denture cleaning.

Denture plaque is a biofilm composed of various microorganisms aggregated with saliva. Various denture cleansers and cleaning apparatuses have been developed and studied. However, the optimum water temperature for denture cleaning is unknown. Therefore, the present study investigated the effects of water temperature during ultrasonic denture cleaning. In vitro, resin disks with artificial Candida albicans biofilm were pressed onto Candida GE media after ultrasonic cleaning with water at different temperatures for 5 min. The media were subsequently cultured at 37°C for 24 h. The colonies formed were observed and colony areas were quantified using ImageJ software (US National Institutes of Health, Bethesda, MD, USA). In situ, the bacterial count and degree of cleanliness on the tissue surface of maxillary dentures were measured before and after ultrasonic cleaning with water at different temperatures for 5 min. Changes in bacterial counts and cleanliness were calculated for each temperature. The ratio of the area occupied by bacterial colonies in vitro and reduction rates in situ after cleaning with warm water were markedly less than those observed after cleaning with cold water. Therefore, ultrasonic denture cleaning with warm water is more effective.

Comparison between Two Assessment Tests for Oral Hygiene: Adenosine Triphosphate + Adenosine Monophosphate Swab Test and Bacteria Number Counting by Dielectrophoretic Impedance Measurement.

Objective assessments of oral hygiene are important to prevent oral and systemic diseases. Two objective assessment tests are available to assess oral hygiene; (1) the adenosine triphosphate (ATP) + adenosine monophosphate (AMP) swab test, which incorporates a luciferase assay and (2) a bacteria count using the dielectrophoretic impedance measurement (DEPIM) method. In this study, we compared the two tests using a subjective visual assessment by professional clinicians and investigated the clinical significance of these tests. Twenty-seven young participants (mean age 26.3 ± 3.2 years) and twenty-seven older participants (mean age 75.1 ± 5.9 years) were recruited. Oral bacteria were sampled from three areas, including the tongue dorsum, the buccal mucosa, and the faucal mucosa, and saliva was obtained using a cotton swab. The amount of ATP + AMP and the number of bacteria were measured by each specific apparatus. Additionally, one examiner assessed the overall condition of oral hygiene using the visual analog scale (VAS). In the ATP + AMP swab test, the means were highest in saliva. For the bacteria count, the means were higher in the tongue dorsum and saliva and lower in the faucal and buccal mucosa. The results of the subjective assessment of oral hygiene indicated that the VAS-value was 3.78 ± 0.97 for the young group and 3.35 ± 0.81 for the older group. No significant difference was observed between the two groups. Additionally, no significant relationship between the values of the ATP + AMP swab test and the bacteria count was found for any of the four sample sites. In the older group, the subjective assessment of oral hygiene was significantly correlated with the values of the ATP + AMP swab test (multiple correlation coefficient = 0.723, p = 0.002). In conclusion, the values provided by the ATP + AMP swab test were not always correlated to the bacteria count. The results of this study suggest that the subjective assessment of oral hygiene was more highly correlated with the results of the ATP + AMP swab test, as compared to the bacterial count assay.

MiR-494-3p induced by compressive force inhibits cell proliferation in MC3T3-E1 cells.

Mechanical stimuli regulate fundamental cell processes such as proliferation, differentiation, and morphogenesis. We attempted to identify microRNA (miRNA) whose expression is changed during compressive treatment in MC3T3-E1, a pre-osteoblastic cell line. Microarray analysis followed by reverse transcription-quantitative polymerase chain reaction revealed that compressive force at 294 Pa for 24 h in MC3T3-E1 cells increased levels of miR-494-3p, miR-146a-5p, miR-210-3p, and miR-1247-3p. Among these miRNAs, miR-494-3p was found to inhibit cell proliferation in MC3T3-E1 cells. Furthermore, cells subjected to compressive force showed slower cell growth compared with control cells. Levels of mRNA for fibroblast growth factor receptor 2 (FGFR2) and Rho-associated coiled-coil kinase 1 (ROCK1), which were predicted to be targets of miR-494-3p, were decreased by compressive force or overexpression of miR-494-3p mimics in MC3T3-E1 cells. Furthermore, binding sites of miR-494-3p within 3'-untranslated regions of Fgfr2 and Rock1 were determined using luciferase reporter assay. In conclusion, compressive force affected expressions of several miRNAs including miR-494-3p in MC3T3-E1 cells. Compressive force might inhibit cell proliferation in osteoblasts by up-regulating miR-494-3p followed by FGFR2 and ROCK1 gene repressions.

Oral factors affecting titanium elution and corrosion: an in vitro study using simulated body fluid.

OBJECTIVES: Ti, which is biocompatible and resistant to corrosion, is widely used for dental implants, particularly in patients allergic to other materials. However, numerous studies have reported on Ti allergy and the in vitro corrosion of Ti. This study investigated the conditions that promote the elution of Ti ions from Ti implants. METHODS: Specimens of commercially pure Ti, pure nickel, a magnetic alloy, and a gold alloy were tested. Each specimen was immersed in a simulated body fluid (SBF) whose pH value was controlled (2.0, 3.0, 5.0, 7.4, and 9.0) using either hydrochloric or lactic acid. The parameters investigated were the following: duration of immersion, pH of the SBF, contact with a dissimilar metal, and mechanical stimulus. The amounts of Ti ions eluted were measured using a polarized Zeeman atomic absorption spectrophotometer. RESULTS: Eluted Ti ions were detected after 24 h (pH of 2.0 and 3.0) and after 48 h (pH of 9.0). However, even after 4 weeks, eluted Ti ions were not detected in SBF solutions with pH values of 5.0 and 7.4. Ti elution was affected by immersion time, pH, acid type, mechanical stimulus, and contact with a dissimilar metal. Elution of Ti ions in a Candida albicans culture medium was observed after 72 h. SIGNIFICANCE: Elution of Ti ions in the SBF was influenced by its pH and by crevice corrosion. The results of this study elucidate the conditions that lead to the elution of Ti ions in humans, which results in implant corrosion and Ti allergy.

Recording of individual identification information on dental prostheses using fluorescent material and ultraviolet light.

The placement of individual identification on a prosthesis is very important for forensic dentistry and traceability. This article describes the unique naming/labeling of dentures with information for individual identification using a method in which information is invisible under natural light but visible under ultraviolet light-emitting diode/black light exposure. The use of laser beam machining with this method will enable the recording of a large amount of information.