Complex 10-nm resolution nanogap and nanowire geometries for plasmonic metasurface miniaturization.

Emerging electromagnetic inverse design methods have pushed nanofabrication methods to their limits to extract maximum performance from plasmonic aperture-based metasurfaces. Using plasmonic metamaterial-lined apertures as an example, we demonstrate the importance of fine nanowire and nanogap features for achieving strong miniaturization of plasmonic nanoapertures. Metamaterial-lined nanoapertures are miniaturized over bowtie nanoapertures with identical minimum feature sizes by a factor of 25% without loss of field enhancement. We show that features as small as 10 nm can be reliably patterned over the wide areas required of metasurfaces using the helium focused ion beam microscope. Under imperfect fabrication conditions, we achieve 11-nm-wide nanogaps and 12-nm-wide nanowires over an area of 13 µm2, and successfully validate our results with optical characterization and comparable full-wave simulations.

Wireless Capacitive Liquid-Level Detection Sensor Based on Zero-Power RFID-Sensing Architecture.

In this paper, a new method for the wireless detection of liquid level is proposed by integrating a capacitive IDC-sensing element with a passive three-port RFID-sensing architecture. The sensing element transduces changes in the liquid level to corresponding fringe-capacitance variations, which alters the phase of the RFID backscattered signal. Variation in capacitance also changes the resonance magnitude of the sensing element, which is associated with a high phase transition. This change in the reactive phase is used as a sensing parameter by the RFID architecture for liquid-level detection. Practical measurements were conducted in a real-world scenario by placing the sensor at a distance of approximately 2 m (with a maximum range of about 7 m) from the RFID reader. The results show that the sensor node offers a high sensitivity of 2.15°/mm to the liquid-level variation. Additionally, the sensor can be used within or outside the container for the accurate measurement of conductive- or non-conductive-type liquids due to the use of polyethylene coating on the sensitive element. The proposed sensor increases the reliability of the current level sensors by eliminating the internal power source as well as complex signal-processing circuits, and it offers real-time response, linearity, high sensitivity, and excellent repeatability, which are suitable for widespread deployment of sensor node applications.

Surface-enhanced mid-infrared absorption spectroscopy using miniaturized-disc metasurface.

Surface-enhanced infrared spectroscopy is an important technique for improving the signal-to-noise ratio of spectroscopic material identification measurements in the mid-infrared fingerprinting region. However, the lower bound of the fingerprinting region receives much less attention due to a scarcity of transparent materials, more expensive sources, and weaker plasmonic effects. In this paper, we present a miniaturized metasurface unit cell for surface-enhanced infrared spectroscopy of the 15-[Formula: see text]m vibrational band of CO[Formula: see text]. The unit cell consists of a gold disc, patterned along the edge with fine gaps/wires to create a resonant metamaterial liner. In simulation, our plasmonic metamaterial-lined disc achieves greater than [Formula: see text] the average field intensity enhancement of a comparable dipole array and a miniaturized size of [Formula: see text] using complex, 100-nm features that are patterned using 100-kV electron-beam lithography. In a simple experiment, the metamaterial-lined disc metasurface shows a high tolerance to fabrication imperfections and enhances the absorption of CO[Formula: see text] at 15 [Formula: see text]m. The resonant wavelength and reflection magnitude can be tuned over a wide range by adjusting the liner feature sizes and the metasurface array pitch to target other vibrational bands. This work is a step toward low-cost, more compact on-chip integrated gas sensors.

Patterning of Complex, Nanometer-Scale Features in Wide-Area Gold Nanoplasmonic Structures Using Helium Focused Ion Beam Milling.

Meeting the evolving demands of plasmonics research requires increasingly precise control over surface plasmon properties, which necessitates extremely fine nanopatterning, complex geometries, and/or long-range order. Nanoplasmonic metasurfaces are representative of a modern research area requiring intricate, high-fidelity features reproduced over areas of several free-space wavelengths, making them one of the most challenging fabrication problems in the field today. This work presents a systematic study of the helium focused ion beam milling of gold for nanoplasmonic metasurface applications, using as its example a nanoplasmonic metasurface based on an array of nanometer-scale plasmonic-wire-loaded subwavelength apertures in a gold film. At each step, the pattern variations are compared to simulation to predict the experimental outcome. Our results show that even in a practical fabrication environment, helium ion beam milling can be used to reliably pattern 10 nm features into gold with 1:5 aspect ratio in complex geometries over a wide area.

A Survey on Battery-Less RFID-Based Wireless Sensors.

We present a survey on battery-less Radio Frequency Identification (RFID-based wireless sensors that have emerged in the past several years. We discuss the evolution of RFID turning into wireless sensors. Moreover, we talk about different components of these battery-less RFID-based wireless sensors, five main topologies that transform a simple RFID chip into a battery-less wireless sensor, and state-of-the-art implementations of these topologies. In battery-less wireless sensors, the read range is of key importance. Hence, we discuss how each component of the sensor plays its role in determining the read range and how each topology exploits these components to optimize read range, complexity, and/or cost. Additionally, we discuss potential future directions that can help provide improvements in RFID-based wireless sensor technology.

New approach for extraordinary transmission through an array of subwavelength apertures using thin ENNZ metamaterial liners.

Extraordinary transmission (ET) through a periodic array of subwavelength apertures on a perfect metallic screen has been studied extensively in recent years, and has largely been attributed to diffraction effects, for which the periodicity of the apertures, rather than their dimensions, dominates the response. The transmission properties of the apertures at resonance, on the other hand, are not typically considered 'extraordinary' because they may be explained using more conventional aperture-theoretical mechanisms. This work describes a novel approach for achieving ET in which subwavelength apertures are made to resonate by lining them using thin, epsilon-negative and near-zero (ENNZ) metamaterials. The use of ENNZ metamaterials has recently proven successful in miniaturizing circular waveguides by strongly reducing their natural cutoff frequencies, and the theory is adapted here for the design of subwavelength apertures in a metallic screen. We present simulations and proof-of-concept measurements at microwave frequencies that demonstrate ET for apertures measuring one-quarter of a wavelength in diameter and suggest the potential for even more dramatic miniaturization simply by engineering the ENNZ metamaterial dispersion. The results exhibit a fano-like profile whose frequency varies with the properties of the metamaterial liner, but is independent of period. It is suggested that similar behaviour can be obtained at optical frequencies, where ENNZ metamaterials may be realized using appropriately arranged chains of plasmonic nanoparticles.

Anisotropic metamaterial optical fibers.

Internal physical structure can drastically modify the properties of waveguides: photonic crystal fibers are able to confine light inside a hollow air core by Bragg scattering from a periodic array of holes, while metamaterial loaded waveguides for microwaves can support propagation at frequencies well below cutoff. Anisotropic metamaterials assembled into cylindrically symmetric geometries constitute light-guiding structures that support new kinds of exotic modes. A microtube of anodized nanoporous alumina, with nanopores radially emanating from the inner wall to the outer surface, is a manifestation of such an anisotropic metamaterial optical fiber. The nanopores, when filled with a plasmonic metal such as silver or gold, greatly increase the electromagnetic anisotropy. The modal solutions in such anisotropic circular waveguides can be uncommon Bessel functions with imaginary orders.