The Effectiveness of Neutral Electrolyzed Water for Decontaminating the Spray Nozzles of Electric Tankless and Tank-Type Warm-Water Bidet Toilet Seats.

Electrolyzed water is a novel disinfectant that is widely used in the food industry. We conducted an experimental model-based study to determine the effectiveness of neutral electrolyzed water (NEW) for the daily nozzle cleaning of artificially contaminated tankless and tank-type bidet toilet seats. The toilet seats were designed to automatically self-clean the spray nozzles using tap water or NEW after each use or at specified intervals. The numbers of Pseudomonas aeruginosa and Escherichia coli microorganisms in the spray water were measured twice or thrice per week. A Kruskal-Wallis test was used to compare the bacterial count in the spray water of various cleaning (NEW) and control (tap water) conditions. The number of bacteria was significantly lower in NEW conditions with and without periodic nozzle cleaning functions than in tap water conditions for both tank-type and tankless bidet toilet seats. Microorganisms were detected only on the surface area around the opening for ejecting spray water and not in the internal piping at the spray nozzle tip. These findings demonstrate that NEW has superior decontamination efficacy over tap water when used as a cleaning agent for the spray nozzles of warm-water bidet toilet seats.

Effect of the Cleanliness of Spray Nozzle on the Concentration of Microorganisms in the Spray Water in Warm-Water Bidet Toilet Seats.

Bidet-toilets are widely used in households and public spaces in Japan. The effect of nozzle cleanliness on spray water quality of warm-water bidet toilet seats is unknown. We conducted a long-term experimental model-based study (2015-2016) and two survey-based studies (A: 2018-2019 and B: 2020-2021) at a university campus. Survey A measured the effect of nozzle cleansing on total viable count (TVC) and heterotrophic plate counts (HPCs) in spray water. Survey B measured the total organic carbon, residual chlorine concentration, TVC, and HPC of different fractions of sprayed water. We found no upstream migration of microbes from the nozzle to water tanks. While daily cleaning of the nozzle surface could reduce bacterial count in spray water, continuous discharge of water washed away bacterial contamination. Fecal indicator bacteria were in traces in spray water, indicating proper maintenance of these toilet seats.

Microorganism levels in spray from warm-water bidet toilet seats: factors affecting total viable and heterotrophic plate counts, and examination of the fluctuations and origins of Pseudomonas aeruginosa.

The objectives of this study were to conduct an appropriate microbial evaluation of warm-water bidet toilet seats. Health-related advantages and disadvantages have been associated with using warm-water bidet toilet seats, which are classified according to the tank type, including tanks equipped with reservoir water heaters and on-demand tankless systems equipped with an instantaneous water heater. However, related bacterial research is sparse. Here, we performed a long-term survey of the behavior of microorganisms (i.e., the total viable count (TVC), heterotrophic plate counts (HPCs), and Pseudomonas aeruginosa count) in a university campus. We also examined the differences between the tank and on-demand types, and the origins of P. aeruginosa. A low TVC (≤1/mL) in the spray waters from both on-demand and tank-type warm-water bidet toilet seats showed low bacterial contamination, although there was an increase in HPC, i.e., growth of biofilms, inside in the warm-water bidet toilet seats. When P. aeruginosa was detected in spray water over an extended duration, the P. aeruginosa origin was considered as either from feces or tap water. Collectively our findings demonstrate that hygienic safety of warm-water bidet toilet seats is being maintained overall.

Bidet toilet seats with warm-water tanks: residual chlorine, microbial community, and structural analyses.

Despite the reported health-related advantages of the use of warm water in bidets, there are health-related disadvantages associated with the use of these toilet seats, and the bacterial research is sparse. We conducted a survey on the hygienic conditions of 127 warm-water bidet toilet seats in restrooms on a university campus. The spray water from the toilet seats had less residual chlorine than their tap water sources. However, the total viable microbial count was below the water-quality standard for tap water. In addition, the heat of the toilet seats' warm-water tanks caused heterotrophic bacteria in the source tap water to proliferate inside the nozzle pipes and the warm-water tanks. Escherichia coli was detected on the spray nozzles of about 5% of the toilet seats, indicating that the self-cleaning mechanism of the spray nozzles was largely functioning properly. However, Pseudomonas aeruginosa was detected on about 2% of the toilet seats. P. aeruginosa was found to remain for long durations in biofilms that formed inside warm-water tanks. Infection-prevention measures aimed at P. aeruginosa should receive full consideration when managing warm-water bidet toilet seats in hospitals in order to prevent opportunistic infections in intensive care units, hematology wards, and other hospital locations.

A study of boron adsorption onto activated sludge.

Boron adsorption onto activated sludge was investigated using bench-scale reactors under simulated wastewater treatment conditions. Two experiments, continuous flow and batch, were performed. Boron concentrations were determined by means of inductively coupled plasma mass spectrometry. The results of the continuous-flow experiment indicated that a small amount of boron accumulated on the activated sludge and its concentration in the sludge depended on the nature of the biota in the sludge. Freundlich and Langmuir isotherm plots generated using the data from the batch experiment indicated that boron was adsorbed onto rather than absorbed into the sludge. The Freundlich constants, k and 1/n, were determined to be 26 mg/kg and 0.87. These values indicate that activated sludge has a limited capacity for boron adsorption and thus utilization of the excess sludge for farmland may not be toxic to plant at least boron concern.